Limit the number of skeletons

I have some application using the Body Basics example from SDK.
Like you know, the kinect v2 get many skeletons simultaneously. My application uses the joint points to do some calculations, but if more then one skeleton appears at same time, i get the wrong result.
Soo, i need some solution, i thinked in 2:
- Limiting the numeber of skeletons to 1, and only the first skeleton that appears stay there.
or
- Limiting the distance of capture, only the closer skeleton will be captured.
I prefer the first one, but if someone has other idea will be welcome.
Sorry for my bad english and Thanks you.

Hi
You can try this step.
After you run SE16 , You need to change your output list to ALV Grid Display
It's from menu Settings-User Parameter.
then you choose which field you want to display. After that do Save Variant -> there will be a checked box to indicate that this will be default setting. Check this box.
Try run SE16 in background.
Please do note that you need to remove check in the delault setting later after you finish, because this layout applied to all SAP table.
hope this help
Best Regards
Caroline

Similar Messages

How can I limit the number of attempts to print a web page

Hi I'm trying to find a resolution for an issue on our network.
We run several kiosk machines that allow customers to print out documents and web pages. However we are finding that we waste a lot of ink due to user's frequently sending the same print task to the printers.
Just yesterday we had someone print out over 70 pages because they just keep clicking print.
I've tried looking for an add-on that would address this but was not able to find one.
My question is this, Is there an internal setting that can be changed in firefox to limit the number of print attempts to say once every 30 seconds, or even a way to make a dialogue box come on screen saying that the print request is currently processing and not allow more printing until the current task is completed.

Sorry, there is no setting within Firefox to prevent that from happening. Once the user sees the "native print dialog" box (what is seen when you do Ctrl + P to initiate printing), the operating system and the printer drivers take it from there.
I have seen something similar to that on kiosk / rental PC's in FedEx Office stores, that notify the user of the cost per page the user wants to send to a printer, and if the user should happen to click again to print the same pages again it asked if you want to spend another $x.xx to print a second copy. Wouldn't be too much different to just shut off the printing of multiple copies of the same document and notify the user of that action.
My advice is to discuss that with whoever set up those kiosks to being with.

Limit the number of open production order

Dear PP experts,
I am working on discrete scenario where client want to limit the number of open production order per work center. The more elaboration is like, for one work center the only specific number of production should remain open (e.g. 5 production order in assembly shop) when user is trying to open 6th production order system should restrict that.
Does any standard functionality available in system or needs development?
Regards,
Shekhar

Dear,
You can do it with avilability check for materail and capacity.
In OPJK do the for your production order type as no release if materail and capacity i missing.
Hope clear to you.
Regards,
R.Brahmankar

How to limit the number of rows in a report

I have several reports with a number of parameters - date ranges etc.
Depending on the parameter values selected by the user the reports can return thousands of rows.
I would like to limit the number of rows returned to, say, 500. If more than 500 rows are returned by the query then display an error message requesting that the user enter more specific parameters.
Ideally for performance reasons it would be good to catch the error before the datafile is generated, but I don't know if this is possible. Alternatively a check in the template might do the job - using COUNT on the group?.

Hi Hugh,
In your query, you got to add rowum < 500 or some sort of DB specific limit to the row being returned,
this will help to stop the report to get more than 500 records and the report template wont have any restriction.
or
you can do that in template too, but i would not recommend.
In these both cases or in any case, you cannot give any meaningful error if it exceeds N rows,there is no option like this till now.

How can I limit the number of emails retained on my ipad air?

How can I limit the number of emails that are retained on my iPad Air? Because of legal requirements of a long-term project, I cannot permanently delete emails relating to that project from my ISP's mail server. My gmail account contains over 17,000 emails and, upon setting up my new iPad, and updating to ios 7.1.1, I now have all 17,000+ emails taking up space. I would like to limit the emails by count as I was able to do on my old iPad running ios 5.1.1 OR to retain them based on date range. I have not found any instructions on the support discussions or general iPad blogs that allow me to do that. Any way around this problem?
I also miss the 5.1.1 mail search feature that allowed me to narrow the search by from/to/subject/all. Does anyone know if that feature is available using some little-known ios 7.1.1 feature?
Thanks for your help.

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

HT2729 I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:)

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

How can I limit the number of messages coming into my email accounts on the IOS7

I don't like the new IOS7 system most annoying is the excess battery useage and need to recharge the other is I can no longer limit the number of emails that are in my cell's email accounts old system let you choose the amount of messages.
already did the basic things to eliminate battery drainiage getting rid of open pages which was also annoying to figure out how to use as you can't simply click and hold then delete all open apps running in the back ground you must touch and slide them off the phone. I don't let apps do auto updates.
They need to do something about the battery and having to have all emails on the phone which likely is sucking up space.
Any suggestions?

I don't think it matters what you use as your email client. This is a feature that existed before and was missed in the upgrade to IOS 7. I read on another post that if you contact Apple support they just tell you to report it in Apple feedback. I just submitted feedback at http://www.apple.com/feedback/ I couldn't find an IOS section to post it to, so I just posted it in the iPhone section. Maybe if enough people do this, Apple will fix it.

When I air print from my iPad, I can't limit the number of pages. It just says print and the number of copies and I end up with way more than I want. How do I set it to limit the pages?

When I air print using FingerPrint from my ipad, it doesn't let me limit the number of pages, and I end up with more pages than I want. It asks if I want multiple copies, but it doesn't ask me number of pages, or which pages. Is there a way to do this?

When you use an AirPrint compatible printer, you get this option for page range. You are using your computer as the server in order to print, so you probably have to set the range on the computer. While you can print from your printer with this app, I assume that it doesn't give you the same control that you get directly from the iPad when using an AirPrint printer.
Read this from the FingerPrint support site. Selecting the page range would be part of the formatting of a print job.
http://fingerprint-support.collobos.com/knowledgebase/articles/66972-i-can-t-for mat-the-print-job

How do I limit the number of rows retrieved at a time using RefCursor?

I have a PL/SQL package in use, that returns a REF CURSOR. This is currently being used in a Forms 6i application. Now I want to develop an ASP.NET web application that displays exactly the same information as my Forms 6i module. In fact those two applications will be used concurrently for a while.
I looked at the sample code provided on otn.oracle.com and decided to use the OracleDataAdapter.Fill()-method to fill a dataset and bind that dataset to a pageable GridView. Now I wonder, whether this method retrieves ALL records of the query at once and how I can limit the number of rows fetched? The Select statement retrieves up to 10000 rows at a time. Most of the time, a user is only interested in the first 20-30 rows. Forms 6i fetches more rows as the user scrolls down, how can I implement the same behavior in ODP.NET?
- Markus

Excuse me, but the reply does not quite answer my question. Maybe I did not explain my concerns clear enough:
I understand the use of the two properties (RowSize and FetchSize) to reduce the amount of round trips needed to transfer the data - not the number of rows fetched in total. This would still lead to a situation where all rows are transferred, when I am using the OracleDataAdapter.Fill()-Method. Is this correct or did I misunderstand the function of this method?
I quote the otherwise really helpful article you send me:
Of course, there is a cost if the fetch size is arbitrarily large. More client-side memory and processor cycles will be needed to store and manage a larger amount of data. The goal is to find a high-performing balance between the number of round trips and the amount of data retrieved per trip.
My RowSize is for sure a bit larger than the one in the given example. The query will probably be used by up to 100 users at a time, so I would like to limit the resource-costs not only on the network by the number of round trips, but also on the web-server which is storing all these records in it's memory per user-request.

How to limit the number of items in a KPI Status list web part?

How to limit the number of items in a KPI Status list web part? There is no paging option for Business Category Status list or any limit can be made by changing the Item limit in default view unlike other SharePoint List web parts. So How to achieve it?
Kindly help.
Regards,
ZA
zzzSharePoint

Hi,
According your post, I know you would like to set the item display limit in Status List web part.
In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
of items in the Status list web part.
It could be a potential issue in SharePoint 2010.
We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
Appreciate your time and efforts.
Thanks.
Tracy Cai
TechNet Community Support

How to limit the number of items that a list control can hold?

Hi,
I am using a Flex3 List control for one of my projects.
I add drag & drop functionality to it, so that i can drag & drop elements from one control to another.
How to limit the number of items that a list control can hold / can be dropped in a list control ?
- Sen.

1. Listen for the dragdrop event on the control you are dragging onto.
2. check the length of the items in the dataprovider - if it exceeds your maximum override the default drop action with e.preventDefault(); (assuming you used e for the event on the handler).
Regards,
Mark.

How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.

How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.

You need to delete your current hotmail account set up on your iphone.
Once this has done click 'Add Account' and select the new 'outlook.com' tab.
Set up your hotmail account again from scratch and this will then allow you to select how many weeks/months of emails you sync to your phone.
Im not sure if anyone else had a similar problem to me prior to iOS 7, but if i deleted an email from my hotmail account on my iphone - it wouldnt sync with my actual hotmail account. So when i logged in online all the emails I had deleted on my phone would still be showing as unread.
But by setting the account up as above, they now sync perfectly.
Well for me anyway

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Limit the number of concurrent users

Is it possible to limit the number of concurrent users for the application in Websphere or at the http management level?

You don't say what version of Websphere you are using, but here's how you might limit the number of sessions in Websphere 4.0 Advanced Edition (other versions may differ):
Open the Administrative Console. Go down the tree to Nodes, Application Servers and click on the server you want to control (likely Default Server). In the right panel, click on the Services tab. In that panel, click on the Session Manager Service and click the Properties button. That pops up a new dialog.
Select the Advanced tab here. Put a number in the Maximum in-memory Session Count field and uncheck the Allow Overflow checkbox. Click OK, etc, etc, and you'll probably have to restart Websphere.
I said "might" because I don't know if this will do what you want or not. Read the help file associated with that dialog and judge for yourself.

Limit the number of skeletons

Similar Messages

Maybe you are looking for