Line alignment cross columns and spacing issue

Hi All,
I am using CC to do article layout for a scholarly journal and have 3 questions:
1. I have a hard time to always align text lines across two columns on the same page. For body text, I use 9.5 point, automatic leading which is 11.4. I have different levels of subheadings which have different spacing (before and after paragraph) specification. they all use auto leading. Since htere are so many variables, what are the principles for getting main text lines aligned across columns, for example, what do I need to set fixed first, what next?
2. The 2nd question is if I have two levels of headings (each has space before and after) together, how to ask ID not to add too much space between the two headings?
3. Probably this is the same question as #2: For some paragraph which has both space before and after, if the next paragraph has the same style as the one in front it, no space is needed between the two. How to do this?
thank you very much in advance for your help!
Eric

"2. "Ask" ID? The spacing before and after a paragraph is defined in the style options. If you have, for example, first heading level 1, then heading level and want them to have less space, you could either decrease after spacing of level 1 or before spacing of level 2. If you have the other situation, with "level 1, then text" or "level 2, then text", you may adjust spacing on the text style only, so the text would always have the same spacing before itself, no matter if level 1 or level 2 is above. "
Thank you guys for replying. So you cannot specify in style to ask ID to automatically adjust space for situations like two different levels of headings together, and you have to do that manually?

Similar Messages

Can we hide the lines between the columns and rows of an alv in wd abap

HI all ,
I know that we can colour cell/column/row in an alv in wd abap.
   but, can we hide the lines between the columns and rows of an alv in wd abap.
     i have checked this link [hiding lines b/n rows and columns of an alv|http://help.sap.com/saphelp_nw04/helpdata/en/91/e7eb40c4f8712ae10000000a155106/content.htm]
     but didn't understand, can please anybody provide some example or any material..? it will be very helpful.
                                                                     THANK YOU.
Edited by: arfat111 on Feb 15, 2010 7:05 AM

Code some like this in the WDDOINIT method of your view which defines the ALV component as used component.
instansiate the ALV component
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_usage_alv().
if lo_cmp_usage->has_active_component() is initial.
   lo_cmp_usage->create_component().
endif.
data lo_interfacecontroller type ref to iwci_salv_wd_table.
lo_interfacecontroller = wd_this->wd_cpifc_usage_alv().
data lo_value type ref to cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model().
hide the grid lines
lo_value->if_salv_wd_table_settings~SET_GRID_MODE( value = '01' ).
Thanks,
Abhishek

Setting the ALV Hierarchy tree with grid line between the columns and rows

Hi Experts,
I would like to ask if there is any suggestion on setting the ALV hierarchy tree to be separated by grid line between the columns and rows just like how it is display the same way in normal ALV grid.
Thanks in advance.

Hi Lin,
The requirement which you have stated is not possible.
Lin,
Also i have a query regarding BADI ZME_PROCESS_REQ_CUST, which you had raised on SDN. You have marked the question as solved/answered.
Changing the data of a customize field in purchase requisition
Could you please let me know, the steps you did to update the screen fields through the BADI.
I would really appreciate your reply, because i am facing exactly the same problem which you have mentioned.
Thanks,
Best regards,
Prashant

Jumbled text and spacing issues when creating a pdf

When I create pdfs from FrameMaker 9 or Word 2007 files, Acrobat 9 Pro often transposes characters or modifies the spacing between characters. Can anyone help?

I modified the settings according to the help page. I then built 5 pdfs and did not see evidence of the letter jumbling or spacing issues. Since this issue is intermittent, I cannot confirm that the problem is solved, but I am hopeful!

Cross Dissolves and Rendering Issues

I am having trouble with FCP 5. My cross dissolves don't work. When I put on in (to fade up from black), they don't do anything. This is not a huge deal because I can just use opacity key frames.
However, I am having another issue. I have three layers of video set up to make a sort of "grid effect" . I have three layers of video, on the left, middle, and right. They are cropped so they do not overlap each other.
When I play back the timeline in preview mode (without rendering) everything plays back fine, but at lower quality.
However, when I render my sequence, the middle box vanishes.
I am using Unlimited RT. I have tried setting the sequence in all three video processing options (RGB, YUV, and high precision YUV).
I have tried making a duplicate copy of my sequence, I have made a duplicate copy of my project as well.
I have trashed my preferences and have restarted my computer about 10 times.
Any suggestions?
Thanks!

Hey there Jim--thanks for the thought,
yeah, I'm famailiar w/ that mode of attack--
essentially, the images are scans of a childrens book made into a DVD---all of these images will be 'deep-etched' and 2.5d'd in AE then re-imported so for all intents and purposes, I'm just slamming together a rough, (pre-photoshop/AE) and just trying to get an approximate timing/flow of each image. So it's easier/faster for me to have 'snap' toggled and be able to slam clips/slugs next to each other as opposed to 'stacking' them, 'checkerboard' style, and approximating where to place them---
I guess if it's just a rough, it doesn't matter either way, to each his own.
I was just looking for a shortcut--but what a cool feature that would be eh? ..being able to lock keyframes to crossdisolves?
so, how are things in Milford??
thanks for re:

Making a straight line aligned with text and adjusting length

i am trying to make a simple straight line above some text in after effects cs5 that lines up with the beginning and end of the text. Not touching or anything. Nothing special. then a line perpendicular to it of a different stroke size.
Also i want it to draw or fill in.
first of all, if i dont get the line length perfect the first time, and i try to adjust the length, then the stroke width changes, also the scale.
this is maddening because if i am making other pieces that i will animate together, i want them to be the same. and every time i try to adjust the line length, it changes everything...
or do i just make all lines and type graphics in illustrator or photoshop and import them...and make a mask. I almost think that all those extra steps might be easier...(sarcasm)
any tips on this as this super basic task is turning into a headache?
thx in advance.

Well, because if you dont get it exactly correct and you want to make it longer or shorter, not only does that change, but the stroke starts scaling. So now you have simply a shorter line, you have a line that appears the same but is inevitably different point sizes and different scales that are maddening to match. I am animating several iterations of a kind of type/line template in 3d space. So i have made each on its own composition that is not 3d.
i thought you would be able to just click on the end of the line/path and make the line itself shorter or longer like in illustrator. Also when the scale changes, it changes its position slightly from its anchor point....

Spry Image Slideshow with Filmstrip Not Working in IE and Spacing Issues with Text on Page

Hello,
Can someone please help me figure out what is wrong. The slideshow works in Firefox and Safari. However, it doesn't work in IE.
Also, can someone help me figure out how to make it so that the text on the page wraps around the slideshow instead of hiding under it?
http://www.lukesfitnessbootcamp.com/
I appreciate any assistance you can provide.

I have a similar problem. I've added a note to reference your problem. I've not got an answer to date.
Cliff

Title/Heading/Row-Align Multi-Column Tables

File under: Frame Annoyances, with a limited hacky work-around
In the two-column format we commonly work in, we often need a table that is column-wide, but may flow into multiple colums.
The problem is that the continuation heading (and TableTitle, if used), never align with the starting heading/title. This is because the continuations start at top of column, whereas the table itself starts (by "Anywhere" default) below the anchor line (presumed to be "In Column" for this discussion)..
OK, what if we change Table > Table Designer [Basic] Start to:
Top of Column: Oops, that becomes top of next column, leaving the anchor text column-widowed (but it gave me an idea).
Top of Page: Oops, that becomes top of next page, leaving the anchor text page-widowed.
Float: No effect
OK, what if we change the anchor text Format > Paragraph > Para Designer [Pagination] Format to:
[Pagination] Across All Columns (AAC): Oops, table appears only in left column on all pages, or;
[Basic] Space & Line Spacing, including negative values, appears to have no effect. Using a tiny font only minimizes the problem, and doesn't cure it.
I thought I had figured out how to solve this at one time, but could not recall it. I'm posting this in part to solicit some simpler solution. Web searching found only one solid candidate solution, and it was, of course, 404. Perhaps Frame versions later than the FM7/Win and FM7.1/Unix that I routinely use have enhancements to address this.
We normally just sidestep the problem by using an AAC format and a table that spans the page, with a fake center gutter, simulating a multi-column flow. But in a recent case, I wanted a real single-column-wide table of variable length (due to conditional rows and expected future growth), but I wanted the headings to align across columns. The table did fit on a single page, which is a limitation of the following hack.
Hack: This example presumes a normal 2-column page text frame that is 7.5in wide with a 0.24in gutter (3.63in columns), and table that needs no more than one page. It works for 3- and 4-column layouts as well.
Use an AAC anchored frame text line.
Create a full page width (7.5in) anchored frame (which can be Below, Top of Col, as desired).
Create a text frame inside the anchored frame. This frame is:
one more than your standard page (3-column for this example)
Same gutter size (0.24in for this example).
Initially draw the text frame to fit inside the the anchored frame, so you can easily grab it.
Make sure the default (anchored table) paragraph format of the first column is "In Column".
Use Graphics > Object Properties to adjust the inside text frame:
Set Width: to your standard text frame total width plus 1 column and 1 gutter (11.37in for this example).
Set Offsets: to 0 and 0 (this will push the rightmost column out of sight for the moment).
Insert your table at the anchored table text of the inside text frame.
In Table Designer, set Start: to Top of Column (this pushes the start of table to column 2).
Select the internal text frame again.
Set Offset From: Left: to negative one column + one gutter (-3.87in for this example).
The table now appears to start in page column one, and flows to additional columns with heading alignment.
This worked perfectly for my recent requirement. In fact, I used a 3-column layout (4 actual) for the text frame inside the anchored frame. Some math is required, sorry .

I'm not sure if I followed that correctly, but if I read it right, you
have a single-column table that spans multiple columns, and the issue is
that the first column does not butt up against the top of the text
frame, while the additional columns do. You want the table in all
columns to butt up against the top of the text frame so that they are even.
If that is the case, the solution is this:
1. Create a paragraph format called "TableAnchor" in the Paragraph
Designer. Assign it with a negative Space Below of -12.0 pt, "Fixed"
line spacing, "Start Anywhere.," "In Column." Assign the font size as
12.0 pt.
2. Create your table format. Give it a Space Above of 12.0 pt.
3. Then, always insert your table into its own, empty TableAnchor
paragraph. You will get the alignment you seek.
NOTES: Anywhere I said "12.0 pt," you can use a different font size-- as
long as you use the same number in each place. You may also want to
create a TableAnchorAAC paragraph format, which is identical except for
the Across All Columns setting, to hold tables that span multiple columns.
I hope I understood the question correctly and was of help.

Creating even columns and rows in flash

I need to create a grid in flash using the drawing tools. The
grid has multiple (10+) columns and rows. Other than using the
ruler and guides is there a way to ensure even spacing with columns
and rows?

Create the lines for the columns and locate the two end lines
where they need to be using the Properties panel X positioning.
Then, with the remaining lines placed between the two end lines,
select all the lines and use the align tool to space them evenly.
Do similarly for the row lines, but on a separate layer. You can
move them to the column layer afterwards.

How can I change or reduce the line spacing to single in a "multiple lines of text" column in a list?

We keep many logs in a simple list format. One of the columns requires a description using the "multiple lines of text" default column. Sometimes the person making the entry needs to complete about 20-30 lines of text. Users are requesting we reduce
the amount of space advanced between lines to save space and be more concise. Is there a way to reduce the line spacing for the column entries to single spacing without code?
Maree N Percival

We determined that the site column settings were incorrect for allowing single spacing, we changed the site column setting from "Enhanced rich text (Rich text with pictures, tables, and hyperlinks)" to "Rich text (Bold, italics, text alignment, hyperlinks)"
and it is now keeping the text in single spaced lines.
<label for="onetidRichText">Specify the type of text to allow:</label>
<input id="onetidRichTextPlain" name="RichText" title="Plain text" type="radio" value="PLAIN" />
<label for="onetidRichTextPlain">Plain text </label>
<input id="onetidRichTextCompatible" name="RichText" title="Rich text (Bold, italics, text alignment, hyperlinks)" type="radio" value="COMPATIBLE" />
<label for="onetidRichTextCompatible">Rich text (Bold, italics, text alignment, hyperlinks)</label>
<input id="onetidRichTextFullHtml" name="RichText" title="Enhanced rich text (Rich text with pictures, tables, and hyperlinks)" type="radio" value="FullHtml" />
<label for="onetidRichTextFullHtml">Enhanced rich text (Rich text with pictures, tables, and hyperlinks)</label>
Maree N Percival

How do I build a model calendar page with three columns and two or three lines per day?

I am trying to build a Page that has three columns with lines in each column that will be numbered according to each month. Then each month I plan to type in the birth dates, anniversaries, special occasions of my family. There will be over 120 entries.Thus far when I take a blank page from Pages and begin to type in the event, it remove the underline I had put in. I imagine I should be able to build one model page and then replicate it as I go from month to month. Thus far I have been unsuccessful. Any help will be sincerely appreciated.
Ken Melley

You could use a Table to set up your information in Pages 5.2, unfortunately it has a bug that makes the table moire or less unusable after a few pages.
Contacts stores all your Address Book information. NJust add all the name, telephone number, address etc and there is an additional field for birthdays, anniversaries etc. Anything else you can put in the notes:
http://computers.tutsplus.com/tutorials/contacts-101-a-beginners-guide-to-contac ts-on-os-x--mac-51751
Calendar lets you run separate sets of dates in a desktop calendar, which can include birthdays, anniversaries or any single or recurring events. Any names you use here will be cross referenced to Contacts.
http://www.macworld.com/article/2057229/get-to-know-os-x-mavericks-calendar.html
Peter

Spacing Issues and You Tube embed not playing in IE8, OK in Chrome or Safari

There are spacing issues (makes the website pages look like they are puzzle pieces) on all the webpages in
IE8, but in Safari and Chrome the website works fine. Same for the You Tube embed.
My wife did the layout of the website in Ilustrator and then transfered over the design to Dreamweaver CS3
(she's a graphic designer - I stopped asking questions long ago). Since she uses a Mac, it looked fine to her
in Safari. She took it to her work computer (PC) and tried to see if there were any issues detected when viewing in CS5
and she said it was fine.
Here is the URL: [url deleted by host]
here is the index file code (main page):
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"><html>
<head>
<title>Columbus Tile and Grout Cleaning Experts</title>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<style type="text/css">

</style>
<script type="text/javascript">

</script>
<script src="Scripts/AC_ActiveX.js" type="text/javascript"></script>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<link href="borderstlye.css" rel="stylesheet" type="text/css">
</head>
<body bgcolor="#002654" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0" onload="MM_preloadImages('images/cleaning_b.jpg','images/sealing_b.jpg','images/repair_b. jpg','images/restore_b.jpg','images/about_g.jpg','images/cities_g.jpg','images/black_email .jpg')">

<table id="Table_01" width="720" height="575" border="0" cellpadding="0" cellspacing="0" align="center">
            <tr>
                        <td colspan="7" align="left" valign="top">
                                    <img src="images/index_01.jpg" width="720" height="73" alt=""></td>
                        <td>
                                    <img src="images/spacer.gif" width="1" height="73" alt=""></td>
            </tr>
            <tr>
                        <td rowspan="13" align="left" valign="top">
                                    <img src="images/index_02.jpg" width="46" height="502" alt=""></td>
                        <td colspan="6">
                                    <a href="about_contact.html"><img src="images/index_03.jpg" alt="" width="674" height="24" id="Image5" onmouseover="MM_swapImage('Image5','','images/about_g.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="24" alt=""></td>
            </tr>
            <tr>
                        <td align="left" valign="top">
                                    <a href="cleaning2.html"><img src="images/index_04.jpg" alt="" width="90" height="95" id="Image1" onmouseover="MM_swapImage('Image1','','images/cleaning_b.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td rowspan="11">
                                    <img src="images/index_05.jpg" width="109" height="445" alt=""></td>
                        <td colspan="3" rowspan="4" align="left" valign="top">
                                    <img src="images/index_06.jpg" width="226" height="215" alt=""></td>
            <td rowspan="4">                    <a href="mailto:info@urldeleted by host]><img src="images/index_07.jpg" alt="" width="249" height="215" class="border" id="Image7" onmouseover="MM_swapImage('Image7','','images/black_email.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="95" alt=""></td>
            </tr>
            <tr>
                        <td>
                                    <img src="images/index_08.jpg" width="90" height="16" alt=""></td>
                        <td>
                                    <img src="images/spacer.gif" width="1" height="16" alt=""></td>
            </tr>
            <tr>
                        <td align="left" valign="top">
                                    <a href="sealing.html"><img src="images/index_09.jpg" alt="" width="90" height="93" id="Image2" onmouseover="MM_swapImage('Image2','','images/sealing_b.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="93" alt=""></td>
            </tr>
            <tr>
                        <td rowspan="2">
                                    <img src="images/index_10.jpg" width="90" height="16" alt=""></td>
                        <td>
                                    <img src="images/spacer.gif" width="1" height="11" alt=""></td>
            </tr>
            <tr>
                        <td colspan="3" rowspan="5" align="left" valign="top">
                                    <div><script type="text/javascript">
AC_AX_RunContent( 'height','181','width','226','src','http://www.youtube.com/v/UjTfSuPyhf0&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&b order=1','type','application/x-shockwave-flash','allowscriptaccess','always','allowfullscr een','true','movie','http://www.youtube.com/v/UjTfSuPyhf0&hl=en_US&fs=1&rel=0&color1=0x3a3 a3a&color2=0x999999&border=1' ); //end AC code
</script><noscript><OBJECT height="181" width="226"><PARAM name="movie" value="http://www.youtube.com/v/UjTfSuPyhf0&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&a mp;color2=0x999999&border=1"><PARAM name="allowFullScreen" value="true"><PARAM name="allowscriptaccess" value="always">
                                         <embed
            src="http://www.youtube.com/v/UjTfSuPyhf0&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&b order=1"
            type="application/x-shockwave-flash" allowscriptaccess="always"
            allowfullscreen="true" width="226" height="181">
            </embed></OBJECT></noscript></div>
            </a></td>
                        <td rowspan="4" align="left" valign="top">
                                    <img src="images/index_12.jpg" width="249" height="128" alt=""></td>
                        <td>
                                    <img src="images/spacer.gif" width="1" height="5" alt=""></td>
            </tr>
            <tr>
                        <td align="left" valign="top">
                                    <a href="repair.html"><img src="images/index_13.jpg" alt="" width="90" height="92" id="Image3" onmouseover="MM_swapImage('Image3','','images/repair_b.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="92" alt=""></td>
            </tr>
            <tr>
                        <td>
                                    <img src="images/index_14.jpg" width="90" height="18" alt=""></td>
                        <td>
                                    <img src="images/spacer.gif" width="1" height="18" alt=""></td>
            </tr>
            <tr>
                        <td rowspan="3" align="left" valign="top">
                                    <a href="restoration.html"><img src="images/index_15.jpg" alt="" width="90" height="92" id="Image4" onmouseover="MM_swapImage('Image4','','images/restore_b.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="13" alt=""></td>
            </tr>
            <tr>
                        <td rowspan="3" align="left" valign="top">
                                    <a href="about_contact.html"><img src="images/index_16.jpg" alt="" width="249" height="102" id="Image6" onmouseover="MM_swapImage('Image6','','images/cities_g.jpg',1)" onmouseout="MM_swapImgRestore()"></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="53" alt=""></td>
            </tr>
            <tr>
                        <td rowspan="2" align="left" valign="top">
                                    <a href="url deleted by host]" target="_blank"><img src="images/index_17.jpg" width="88" height="49" alt=""></a></td>
<td rowspan="2">
                                    <img src="images/index_18.jpg" width="47" height="49" alt=""></td>
                        <td rowspan="2" align="left" valign="top">
                                    <a href="url deleted by host" target="_blank"><img src="images/index_19.jpg" width="92" height="49" alt=""></a></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="26" alt=""></td>
            </tr>
            <tr>
                        <td>
                                    <img src="images/index_20.jpg" width="90" height="23" alt=""></td>
                        <td>
                                    <img src="images/spacer.gif" width="1" height="23" alt=""></td>
            </tr>
            <tr>
                        <td width="674" height="33" colspan="6" align="left" valign="top" bgcolor="#FFFFFF"><span class="style1">Your tile and grout cleaning, restoration, and repair experts. Some of the cities serviced: Columbus, GA; Fortson, GA; Hamilton, GA; LaGrange, GA; Midland, GA; Pine Mountain, GA; Phenix City, AL; Smiths, AL; Auburn, AL.</span></td>
<td>
                                    <img src="images/spacer.gif" width="1" height="33" alt=""></td>
            </tr>
</table>

</body>
</html>
Please help!

Please note my anti-virus program is warning me that your website is harmful. Please correct it immeidately or your link will be removed from Adobe's forum.
This is what F-Secure says:
<http://browsingprotection.f-secure.com/swp/result?url=http%3A%2F%2Fwww.cleaningsolutionsun limited.com%2F&lang=ENG>
This is what Mcafee says about your site:
<http://www.siteadvisor.com/sites/http%3A//www.cleaningsolutionsunlimited.com/>
Good luck.

Chart missing Columns and Lines

I have created a Column Line Chart and allow the user to input different values that change formulas to produce the columns and line on the graph. I can see the graph perfectly fine with all columns and the line on the canvas view. Whenever I try to export to any file type, upon opening the file, all but two of the columns are missing and the line is missing in all spots except for at two points.
I've noticed that if I remove my formulas from my spreadsheet and just put in hard coded values in place of the formulas, the report populates correctly, but this takes away all functionality of allowing the user to adjust inputs, which is the entire reason we are using this software.
Please advise how I can fix this issue so that my chart shows all data.
Thanks,
Dan

Hi Dan
This is common - this can happen due to possible reasons like
1) The data in preview mode on which the formula is applied is not same as the hard coded or the one in design mode. So when you go to preview its different view in the chart
2) Some other component is messing with the excel ranges you are using for formula for the chart - some components which can drop values as per their destination property.
This is how you need to test
- Add a test spreadsheet table component ( from selector category) and map all the cells that's included in the formula - the original range, the input values from the user interaction, and the final ranges with formula and the range to which chart is mapped to if different from the formula range.
- Preview the dashboard and see whats going on in those cells and if they all are behaving as expected.
- if the original data range and the input data are what you anticipate and not changed by any other variable you are not considering.
Use more than one spreadsheet table if the ranges I suggested are not contiguous.
Please try the above and post the updates.
Thanks
Runali

In XI pro, exporting PDF to Excel problem. Excel columns and data are not properly aligned. Help?

I used 30 day trial of Acrobat XI and all the functions work perfectly. But, when I buy the program (either download or disk) my PDF that export to Excel is not working. The excel columns and data are not properly aligned as they should be. The Trial version aligns everything perfectly. What is happening? I use a MAC 10.9.5. But this shouldn't matter because the trial version works perfectly. Can anyone help?

just found out that this is posted in the wrong section.

I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
(see ISO 32000 for what PDF "is")
What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
Be well...

Line alignment cross columns and spacing issue

Similar Messages

Maybe you are looking for