Line bar combo with logarithmic scale

hi, I found that
logarithmic scale is not supported for line bar combo.
I have checked the checkbox "Use logarithmic scale" under "Tick Marks & Scale Type" under "Axis Scaling" for the left axis.
but the charts (both checked and unchecked) are the same, there is no difference.
And it is unable to check the checkbox "Use logarithmic scale" for the right axis.
is it the limitation ?

Hi,u use enterprise Edition???
check this blog,really helpfull
http://obiee101.blogspot.com/search/label/CHART
hope i helped...
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Similar Messages

Need help in Line bar combo chart - line is not prominent in dashboard

Hi All,
I face an issue where the line in a line bar combo chart is not prominent in Dashbords.
lets say i have 5 reports (all of them are line bar combo charts) in a dashboard. The lines in graph are not prominent or not displayed in usual thickness. But this scenario does not happen always. if i scroll down or up the browser(here i am using IE8) some of the reports displays line in the charts and some does not display the line. when i click on the report then the line will be displayed.
please suggest whether this is a browser issue ror something to deal with OBIEE itself.
Thanks in advance.

Hi,
It's a bug in obiee11g. kindly download the patch file from My Oracle Support and delpoye it
OBIEE 11g: Line Bar Combo , With Stacked Chart , The Bar Width Gets Affected [ID 1369493.1]
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Symptoms
When the chart type is changed from Standard or Default line-bar to Stacked line-bar chart, the bars are reducing their width.
Line-bar should keep the width of the previous bars.
However, when vertical Bar is changed to stacked vertical, the bar width remains the
same. But when a regular Line-Bar is changed to stacked vertical, the width
changes (reduces, in this case it becomes half the original width)
Cause
For dual Y stacked bar graph, the bar width was half of the regular bar width
because the series assigned to Y2 was given the half of the space also. This is not needed if the marker type for Y2 is not bar.
The following bugs have been opened to handle this issue
Reference Bug:
Bug 12931660 - line bar combo with stacked chart changes its width
BUG:12931660 - LINE BAR COMBO WITH STACKED CHART CHANGES ITS WIDTH
BUG:12947990 - BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Bug Ref:
e.x: applying patch file refer the below file
http://obieeelegant.blogspot.com/2011/11/how-to-apply-patches-using-opatch.html
Thanks
Deva

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Line Bar Combo chart with Bar-stack in OBIEE

Hi,
I want to create a Line Bar chart with only the Bar as stacked elements.
The bars should be on the Y1 axis and the Lines on the Y2 axis. Different scale on Y1 and Y2.
If I try this in OBIEE 11.1.1.5 answers, all elements (Bars and Lines) will be stacked.
Can anybody help me?
Thanks for response.
M

Line-Bar issue on 11g is not a bug. It’s part of the upgrade - Stacked line-bar graphs in which 2 or more measures are shown as lines on the same axis and are not stacked in 10g are stacked in 11g.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/apndx_ui_chngs.htm
I have not found the workaround yet. If you find it please post on the blog.
Thanks

Chart Formatting Question: Line Bar Combo

Hello -
I have a quick question regarding the order of labels displayed in the legend on a line bar combo chart. I have figured out how to rearrange the order of bars in the chart (the order is determined by the order of fields in the criteria section), however, OBIEE seems to always put the "line" field before the "bar" fields in the legend.
I was wondering if there is a way to set the chart to display the "line" field following the "bar" fields in the legend?
Thanks for the help!
Jason

Hi Jason,
Go for Pivot Chart rather than Chart... and
Apply Order by s as you want inside pivot....
Previously even i got the order by problem in chart.. but trying the pivot chart, i resolved my issue...
So give a try..
Hope you know about pivot chart. Select Chart Only option from drop-down available for chart position
Thanks & Regards
Kishore Guggilla

Show 2 line graphs together in Line bar combo graph

Hi,
I am currently working on to show data for 2 years (which will be selected through prompt), month on month basis in Line-Bar Combo Graph.
I could achieve to show 2 years of data month on month basis in Bar Diagram, but the same is not happening for Line diagram.
In Line Diagram, values for 2 years are joined and shown as a single line, where as I want to see 2 separate lines for the years selected.
Kindly have a look at the link below:
!http://i42.tinypic.com/cuek8.jpg!
Any suggestions?
Regards,
Jitendra

Hi,
I am putting up the snapshot of what I have done,
!http://i42.tinypic.com/2j8jkx.jpg!
As you can see in the image, I have
1. Utilization Rate &
2. Attendance Booking
as my fact.
I can arrange the Attendance booking (Bar Diagram), as Month-on-Month basis for any 2 years.
My aim is to plot Utilization Rate, in the Line Diagram. Currently it's been shown as One Single Line, I want to see 2 different line for the 2 years selected.
Kindly help.
Regards,
Jitendra

Graphing with logarithmic scale in AI5?

I received a graph in MS Excel that uses a logarithmic (as opposed to linear) scale, but as far as I know, it isn't possible to create a scatter-plot graph with logarithmic scale in Illustrator. Does anyone know if there is a plug-in or a script that can do this?
I am happy to upload the Excel file if that would be helpful. This is my first time using this forum, though, so I just need to know how to attach it.
Thanks

I found this link that has a plugin that states it does logarithmic scale, it is called ToolDemo here is the link, hope it's what you are looking for. http://www.telegraphics.com.au/sw/#tooldemo

Line-Bar Chart with multiple straight lines

Experts,
I have a requirement where in I have to show multiple straight lines on the Line-Bar Chart. For example if we have a graph of County Names(X) vs Population Count(Y). The bars represent the population in each county. And three straight lines across bars should represent avg. population of all counties, region and state respectively. Is it can be done ? if not line-bar any other graph ? Please let me know your valuable suggestions.
Regards,
Tom
Edited by: Tom Lype on Feb 23, 2012 8:58 AM

Hi Tom,
I am afraid that the example that you have mentioned is possible in Line-Bar combo or any other graph. What you are asking for is 1 measure against three dimensions is not possible. How can you represent Country, Region and State on X axis on the same graph???
Regards,
Rituraj Kumar

Problem with logarithmic scale in combination chart

Hi Experts,
I have a combination chart where in primary axis i am showing column chart and in the secondary axis, i am showing line chart. Now as the range of values used in the column chart is big, I have to use logarithmic scale in primary axis. But if i do so, the line chart is also being affected. The markers for negetive values in the line chart plotted in secondary axis disappears if I apply logarithmic scale in primary axis.
Is it a bug ?
I am using Xcelsius 2008 SP3.
Thanks and Regards

Hi:
Yes, I also noticed this problem, seems when you set primary axis as "Logarithmic", the secondary axis with negative value "<0" will be ignored as "0". I think it should be an issue.
A quick work around here is, swith your primary axis and your secondary axis, when you set seconary axis as "Logarithmic", the negative values in primary axis will not be ignored.
Hope it helps.

Controlling lines vs bars in a line-bar combo chart

I created a pivot view with 3 measures, and then selected the line bar chart type.
The first 2 measures show up as bars. The 3rd shows as a line on secondary (right hand dise) axis.
Is there any way to make the 2nd measure also appear as a line on the secondary axis, instead of a bar on the primary axis?

Line-Bar issue on 11g is not a bug. It’s part of the upgrade - Stacked line-bar graphs in which 2 or more measures are shown as lines on the same axis and are not stacked in 10g are stacked in 11g.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/apndx_ui_chngs.htm
I have not found the workaround yet. If you find it please post on the blog.
Thanks

Same columns multiple time in Line - Bar Combo Graph

Hi,
i am trying to generate a Line-Bar Graph, where I will have 2 measures "Capacity" & "Utilization Rate" in both Line as well as Bar Format.
I tried taking theses two columns twice in my criteria and then designing it but it does not show properly (as per the scale) sometime when the scale is modified the Line Graph vanishes.
Kindly Suggest.
Regards,
Jitendra

<DataLabels Visible='True' Font='Name:Helvetica; Size:14; Style:Bold; Color:Black;' Position='OutsideTop' ShowOnRollover='False' TransparentBackground='False' BGColor='#b2ccb2' BorderType='Thin' BorderColor='#667f66' AlwaysShowDecimalPlaces='False' NumberType='General' UseThousandsSeparator='True' DecimalPlaces='2' NegativeDisplayType='MinusSign' ShowAsPercentageType='None' ShowOneValueOnStacked='False' ShowPercentDecimalPlaces='False' PercentDecimalPlaces='2' WrapWidth='400' FormatString='%_VALUE' TimeFormatString='%m/%d/%y %T' DrillDownHighlightColor='Blue' DrillDownEnable='False' ShowBarZeroValues='False' TopMargin='2' BottomMargin='2' LeftMargin='3' RightMargin='3' UseAbbreviation='True' />
I've tried using the Position parameter in the example posted above but nothing I try will allow me move the data label centered in the bar versus sitting on top outside of the bar. Any ideas? It seems strange not to have an option of positioning the data labels.

Active Ingredient Management with Logarithmic Scale

Dear Gurus,
I would like to manage the batch specific concentration of an active ingredient that is measured on a log scale. This is similar to pH, but the active ingredient I would like to manage is a virus particle.
Any guidance would be appreciated,
MediSteve

Dear MediSteve
You could use the Characteristics
Characteristics are criteria according to which you can search for batches. These characteristics are defined when creating a class. There are two different types of characteristic:
User-defined characteristics :
These are characteristics which are not defined as fields in the batch master record.
For example: Active ingredient potency, viscosity, color, weight
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm
good luck.

Area chart with line graph combo - Is this possible to create?

Can you create an area chart and line chart combo? The line bar combo chart doesn't capture what I want.

hi,
it is better for 2 different questions,make 2 differents threads...
You used the 2ond solution(google???),put in the dashboard...html enabled...and check your pdf again.
Moreover,printing pdf with answer is discouraged...always prefer Xml Publisher.
Last,there are 2 fst files which configure the *.pdf files , check them,
http://obiee101.blogspot.com/2008/09/obiee-pdf-controls-fst-files.html
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Line-stacked bar combo

Hi All,
I want to drow a line-bar combo graph. Bars should be in stacked format. My data looks like;
X:     Time in days
Y:     Quantity (bars)
Z:     Sales in $ (line)
Legend: Region (stacked)
Unfortunately, I couldn't drow that graph in OBI. Any way to do it? Please help ASAP.
Thanks & Best Rgrds,

Hi Stijn,
Thanks for your response.
I tried this...
new field: FILTER("Opportunity Base Fact"."Product Bookings Amt" USING ("Opportunity Stage"."Opportunity Stage Name" IN ('1 - Prospect', '2 - Qualification', '3 - Proposal', '4 - Agreement', '5 - Closing')))
I tried plotting this on the X / Y axis. But didn't get stacked bar graphs.
X axis i have fiscal month
y axis i added the new field
and line I added another measure.
But didn't get the stacked bar graph. Please let me know. :-(
Thanks,
Rajan

Combine a Bar Graph with a Line Graph!

Is it possible to combine a Bar Graph with a Line Graph because occasionally we wish to use both bars and lines on the same plot.
If yes, could you please give us a sample rtf file?
Thanks,
-Ritu

Hi Tim,
To be more clear, I need to superimpose the two graphs.
For example,the first one shows the budget for each month along with the actual expenditures as a bar graph. The other shows the cumulative budget, forecast and costs for the entire project as a series of lines. The first graph uses the scale on the left side of the graph and the second graph uses the scale on the right side.
Thanks,
-Ritu

Line bar combo with logarithmic scale

Similar Messages

Maybe you are looking for