Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Similar Messages

  • Line-in not working with microphone?

    Line-in not working with microphone.
    I have Mac Mini Intel 1.83 GHz with 10.4.8
    I have tried plugging 3 microphones into the line-input on the back, also on my wife's Mac Mini (same model, os), but I cannot get to record into the Mac.
    I've been into System Prefs and set input to Line In and slid the Input Volume to high, but nothing.
    I know the Microphones work because if I plug them into a Griffin USB/mini jack adaptor and do it that way by selecting iMic USB audio system from the Input in System Prefs all works fine.
    But I need to use the mic with the Line-In.
    Any ideas why this is not working?

    The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
    That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

  • Zen Micro Photo not working with new XP SP2 install

    Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
    When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
    There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
    Any help greatfully received!

    Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
    Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
    Filesize : 27.9 MBDownload

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Recovery did not work with new hard drive

    The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
    I bought new one (320G, sata 2, Western digit )
    The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
    After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
    An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
    It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
    I have been trying to solve this a lot, but no way
    I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
    I hope that I get the right thing to do, from ur forum by this post.
    Thanks a lot

    Did you folks search here for "advanced format drive"?    People have had numerous weird problems with the new advanced format hard drives in older Toshibas.    I can't look up all the threads for you.    But here is one:
    http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

  • Logitech Pro 4000 not working with new Imac 24"

    Just migrated from a G4 to the new Imac 24"
    Cannot get the Logitech Pro 4000 to work with new mac.
    Contacted Logitech and they said
    "please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
    However,the cam DID work ,even under 10.4.8 with the old G4...
    Any ideas people..
    Thanks!

    Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
    <http://www.ioxperts.com/products/webcamx.html>

  • HD Led not working with SATA drives on MSI K7N2 Delta

    I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
    I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
    Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
    I had Bios v7.3 and flashed to v7.4 with no luck.
    Could a new bios update fix this problem?
    Anybody seen this before?

    basically it not wired up so works for no one

  • Isub not working with new imac

    the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
    the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
    thanks
    -pd

    The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

  • Xml code not working with new version

    Hi,
    my following code is not working with the xalan 2.7.0 version. Any one can help to convert this to work on new version.
    import java.io.*;
    import java.util.*;
    import org.xml.sax.*;
    import org.apache.xalan.xslt.*;
    public class XML2Edifact
    public static void main(String args[])
    throws SAXException, IOException
    if(args.length < 3)
    throw new IllegalArgumentException(
    "Usage is XML2Edifact in.xml xsl.xsl out.edi");
    InputStream sin = new FileInputStream(args[0]),
    sxsl = new FileInputStream(args[1]);
    OutputStream sout = new FileOutputStream(args[2]);
    EdifactFormatter formatter = new EdifactFormatter(sout);
    XSLTProcessor processor =
    XSLTProcessorFactory.getProcessor();
    XSLTInputSource in = new XSLTInputSource(sin),
    xsl = new XSLTInputSource(sxsl);
    XSLTResultTarget out = new XSLTResultTarget(formatter);
    processor.process(in,xsl,out);
    }

    Solved, had to repair the Z10 with the PC!  Would have thought that upgrading software would have saved the environment so that this step was not needed (played with this for several weeks on-and-off).

  • JSP Not Working with Thin Driver

    My JSP is not working with Oracle thin driver but it is working with Oracle OCI driver.
    From my jsp i am calling a stored procedured and passing 170 parameters to the procedure. This JSP works with Oracle OCI Driver configured as thrid party drivers in iAS6.0 SP2, but not working with Oracle Thin Driver configured as third party drivers in iAS6.0. My thin driver JDBC Connection URL is as follows:
    jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = MAPDBI01)(PORT = 1521)))(CONNECT_DATA =(SID = MAPS))).
    I have to give this URL because my production server deployment consists of iWS4.1 SP5 and iAS6.0 SP2 in different solaris boxes and Oracle 8.1.7 Database server in another Solaris Box. There is a pool of proxy servers between iAS6.0 box and the oracle box.

    Wim,
    I'd really appreciate it if you could provide some sample code. A complete, small, simple java class that I could copy and try out would be wonderful -- if it's not too much trouble.
    Thanks heaps (in advance :-),
    Avi.

  • Printer not working with new router

    I have a new router and my laptop with Windows XP is working Ok
    My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
    What can I do

    Hi @Jobrig,
    Welcome to the HP Forums!
    I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
    For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
    In the meantime, please see the following:
    This printing guide, Print Jobs are Stuck in the Print Queue.
    This website, HP Wireless Printing Center, may also help.
    Hope these guides will help you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

  • Hp Photosmart not working with new router

    My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

    @Ann99, welcome to the forums
    I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
    I have some questions and some things for you to try.
    1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
    2. What did tech support determine the issue was when you called them?
    3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
    Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
    The Printer Is Not Found During a Wireless Network Installation
    4. What Operating System are you running on your computer?
    5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
    Please let me know all of the information and results from your troubleshooting above!
    Have a terrific day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • WRT54G v6 not working with new Motorola SB6141 on Comcast (IPv4 and IPv6)

    My WRT54G v6 not working with a new Motorola SB6141 Cable Modem on Comcast (IPv4 and IPv6).
    Yesterday, I had my old DOCSIS 1.1 cable modem and the WRT54G had been working just fine for the past 8 years.
    Last night, I swap in the DOCSIS 3.0 SB6141 cable modem, and now the WRT54G keeps losing the internet connection.  When I go into the status page for the WRT54G, I often do not see DNS servers and sometimes do not even see an IP address.
    If I connect a PC directly to the SB6141 cable modem, I have no problems whatsoever.  But whenever I connect through the WRT54G and power cycle both devices, then I have internet connectivity for about an hour before it drops out.  I have noticed my gateway IP address and DNS servers change at that time as well.  I can also force the Linksys to lose connectivity by doing a DHCP release/renew on the Linksys status page.
    Is this behavior because of the dual stack (IPv4 and IPv6) coming through the cable modem from Comcast now?  Is there any way I can keep using my WRT54G v6 now that I have the SB6141 cable modem?  

    You just have to install it correctly.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=3686

Maybe you are looking for

  • F -03 clearing

    Hi, I wanted to clear one GL account based on field Reference key 2(xref2) manualy through F -03 . I had updated that field ( REF key 2 ) in each line item. I had also inserted Ref key 2 field in F-03 screen through O7F1. Now the query is When I go t

  • ORA-06502:PL/SQL:numeric or value error. Dynamic SQL the only answer??

    ORA-06502: PL/SQL: numeric or value error: character string buffer too small. I have an HTMLDB report that errors with the above message. The query is over 7000 characters long so I'm guessing this is the cause. If I retrieve the query from a query t

  • My Yahoo mail won't load on my mac

    For some reason my Yahoo mail won't loand on my Mac, though it will automatically on my i-phone and i-pad. Always has done before, just seems to have stopped. Any ideas?

  • How to develop and run skripts agains fusion middleware managed servers, eg. MDS

    Hi! Is it possible to write and run scripts against fusion middleware home's? How can I change to the correct wlst in this case? I have declared my server. I think it should call $ORACLE_HOME/oracle_common/common/bin/wlst.sh on my server instead of a

  • Continue to play iTunes after closing MacBook Pro

    I recently got my MacBook Pro, and I was speachless when I found that when I closed my laptop that my music would continue to play. I would walk around campus playing music with a closed laptop-it was great. But then I needed to restart my computer,