Line item confirming issue

We have a probelm with TAPA/TAN orders confirming the product. The TAPA line may "confirm " the entire amount requested , but the TAN line only confirms what is available even with the complete button checked on the order, therefore, if the sales person doesnot notice that the TAN line is not fully confirming, we may ship partial loads of orders. this is a manual process that is causing problem to the customers. How to resolve so that both item line confirm or donot confirm. Plz help.
Thanks!

Path
SPROSD-BFAC and TOR-ACAC with ATP-Define default settings
Here configure the last field with B-Full delivery.
This will solve your problem. If you keep as B, it will confirm only the full quantity for the material, else it wont confirm at all.
Rwd if it helps.

Similar Messages

Confirmation Reversal - PO Line Item Edit Issue

As per the business rule, if you reverse/delete the confirmation on a line item on the PO, you should be able to edit that line item.
However, in my case, even after deleting confirmation also, PO line item cannot be changed.
Generally when you delete the confirmation, where(which table) does this info stored and where shuld I look for this info - which Badi, FM?.
Currently what is happening is that when you change a line item, the program looks in table bbp_pdbei table and if the entry exists, it thinks that that line item is confirmed. Is that ok or should this entry be deleted from this table if the confirmation is deleted.
Any help will be highly appreciated.
Thanks

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Sales BOM Header line item confirmed without components in Delivery

Hi Experts,
The issue is about the delivery is created with the single component for the Sales BOM where as it contains two.
We have analyzed the issue and checked that the missing component would have not been available in the stock during the time when the delivery is created and hence is not included(Header material and single component is included in the Delivery).
The user's concern is; when there is no stock for any one of the component, then it shouldn't have confirmed the header material. Kindly suggest.

Hi Azam,
It seems to me that you want to use Delivery Group for Sales BOM where If Mat A = Mat B + Mat C and Mat B Availability date is 20/07/2014 (DD/MM/YYYY) and Mat C availability is 25/07/2014 then Main line item should be confirmed with 25/07/2014.
If any one sub Item is not available, then Any of the item from the Grouping should not be dispatched.
If this is the requirement then, In Item Category (VOV7) for main Item update Create Delivery Group field with X and your requirement will be fulfilled.
Do let us know the result after testing.
Regards,
MJ.

PO line item locking issue

Hi,
Does anyone had this issue before?
In ECC5, we lock the PO line item using FM ENQUEUE_EMEKKOE, but SAP still lets you create/confirm Transfer Orders for Inbound delivery, however, the same FM is not allowing you to create/confirm TO's in ECC6.

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Line item confirmation and goods reciept number of a shopping cart

Hi All ,
I am waiting for any response from u guys to my below post ....
I have developed an end to end report in SRM which gives us an end to end report of a shopping cart .
I have got the Shopping Cart details using FM : BBP_PD_SC_GETDETAIL
for each item of the shopping cart in the table E_ITEM , getting the Po number for it from E_ITEM- BE_OBJECT_ID
I called FM BBP_BE_PO_GETHISTORY to get the Confirmation and Invoice number from E_HEADER_REL of BBP_BE_PO_GETHISTORY.
But this function module gives me the confirmation and invoice number of a particular purchase order and
I am stuck here as I need to find out the confirmation and invoice number of a line item and I am not finding a link between them .
I tried using FM BBP_PD_PO_GETDETAIL ,
BBP_PD_PO_GETLIST
BBP_PD_PO_DOC_FLOW and other function modules also , however they give me the confirmation and invoices o a particular PO but I am not able further drill down to find confirmation and invoivce of a particular line item of a shopping cart ..
Please let me know if there is a way to find this out ????
Has anybody have an idea to find this out ????
Useful answers would be rewarded .
Regards,
Prabhu

Hi All ,
I was able to get a link using the function module BBP_PD_SC_GETDETAIL . in the tables E_item has fields BE_OBJ_ITEM and the BE_OBJ_ITEM which give the po number and po line item number of each line item .
then i used BBP_BE_PO_GETHISTORY Fm to get the history of the po and read the line item history based on the BE_OBJ_ITEM no .
Thanks to all .
Prabhu

Goa line item sequencing issue

Hello experts,
I am facing a problem in GOA line item sequencing in SRM 4.0.
I create a GOA with lets say 3 line items and distribute it successfully to the backend.
Now if I want to add extra items using option 'Add Calaog items' from R/3 material and service catalog. The new items that I select and tranfer to SRM are created under line item 53 54 and so on..
Why is this gap in the line items and why I can't I get the new line items in proper sequence?
Please help.
Thanks and regards,
CM

Hello CM,
Have you received any repsonse on this? we are facing same issue.

Sales Order line item confirmed?

Hi,
Is there any table / field to which we can refer to for knowing whether the sales order line item's open quantity has been confirmed or not.
I see the line entries in table VBEP, but, in that I guess I'll have to do calculations to check whether the line item open qty is equal to the confirmed qty.
Please let me know if there is any other method.
Thanks

Hello Yusuf,
Try with the table
VBBE- MENG - Open Qty
VBBE- VMENG - Confirmed quantity.
or
VBEP- WMENG - order quantity
VBEP-BMENG - Confirmed quantity
or
VBAP- KWMENG --Total Quantiy
VBAP-KBMENG-- Confirmed Quantiy
Regards,
Thanga

Sales Order Line Item Confirmation.

When are running delivery due List, there are few sales orders remaining even delivery creation is done for all the sales orders.
Reason for that is sales has got confirmed through V_V2 Transaction i e sales order allocation. but actually there is no stock of that material. but how it is getting confirmed. what may be the reason?
Pls help
thanks in Advance

Hi,
Confirmation of delivery date and availability of stock are two different things. A line item si confirmed doesnt mean that the stock will be available on that day.
When the delivery date is calculated, the future inflow and outflow of the materials are considered and thus the delivery date is arrived. So also during rescheduling. However after that some of the expected inflows would not have come and as a result, stock may not be available. This is the reason why the deliveries are not created for these materials.
May be you have to check the stock once and then update the stock before running the delivery job.

Order Line Item Status Issue

Experts,
The way that order line item status is determined in SAP is causing confusion with our customers how are using our ECommerce for ERP module. The line item status does not take into account the line item's delivery statuses. For example, a line can be complete in SAP, even through its delivery is partial. From a customer's standpoint, the line item is not complete until all the deliveries are complete.
I would love to hear how are other companies are addressing this issue? Do they enhance the ECommerce module, or ECC?

Check the [Modification Guide|https://websmp210.sap-ag.de/~sapdownload/011000358700000469462006E/]" for the tip. See the section on Replacing calls to standard function modules.
Register the function module within WEB-INF/xcm/customer/modification/modficationconfig.xml
<function-module-replacement>
<param name=u2018fm:CRM_ISA_SHOP_GETLISTu2019 value=u2018Z_CRM_ISA_SHOP_GETLISTu2019/>
</function-module-replacement>
Instead of the standard function module, your function module will be called during runtime.
Easwar Ram
http://www.parxlns.com

FS10n Line item display issue

Hi,
When we are displaying line items in credit side of FS10N (double clic option), the result shows some line items with positive sign (It supposed to show only minus sign in all items). Is it correct? Is there a reason? Is it a bug?
If someone has an idea please let me know,
Thanks in advance,
Roberto C.

Hi Roberto,
please check, whether the mentioned items represent negative postings. Check if BSEG-XNEGP ='X'.
Please check note 1258687 as well.
Regards,
Joosz

Line item number issue when manually created PO is attached to Auto PO

Initially, we have an automatically-created PO with 4 line items. We created another PO in R3 system and added the line items to the auto-PO. When this was added as 5th line, the item number listed was 14 (instead of 5). Could you help me investigate on this?
Thank you!

hi..
please check the number assignment for your PO document type...
whether there is serial number profile assigned to that Doc type or not....
Thanks..

Line item dimension issue

Hi,
      I am on development system and want to know the fact and dimension % as I need to create line item dimesion.
One solution is executing program SAP_INFOCUBE_DESIGN.
      But if I want to use this same program in Production system, it will take a lot of time and will engage resources......
      Kindly suggest me as to how to find out which dimension should be made a line item dimension?
Thanks,
Sonu

Hi,
Use RSRV.
Execute RSTRV and here you have the option of single cubes.
This takes the ourput from the same tables where the SAP_INFOCUBE_DESIGNS takes.
All Elementary Tests -> Database -> Database Information about InfoProvider Tables.
Give your infocube name here and execute.
It gives you a good detailed output.
Thanks
Ajeet

Header line item mapping issue in LSMW

Hello experts,
I am trying to map my data in LSMW with header and line items.My structure looks like this.
1header col1 col2 col3 (2item) col1 col2
1header col1 col2 col3 (2item) col1 col2
In the line item col1 changes its posting key.
Header is reapeating for every line items how to map the above in LSMW .
How to upload the data only when the Reference document number is changing??
Thanks and regards,
Vijay Simha CR

Hi ,
at Step 3-->maintain source fields -->Double Click on the Key Field -->Tick the check of Selection Field....
here you need to decide which one is the key field...if you dont have key field in Item level then create one.
regards
Prabhu

Sales order: Two schedule line items for single order item

Hi,
I have an issue with the schedule lines in the sales order. When we create a sales order with today as the delivery date, it creates two schedule lines for the single order item. But if we give future date as the delivery date, then it creates one schedule line only. The confirmed quantity for the first line item (with today we the delivery date) is zero and second line item confirmed quantity (with delivery date as tomorrow) is actual order quantity. So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do we have stock.
We donu2019t have availability check on and we use custom line item and schedule line categories.
Please give some hints on what might be the issue.
There was on post with this kind of issue, but it was closed without answer.
Thanks,
Srini

Hi Srinivas,
So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do have stock.
As per my understanding although you have sufficient stock for the material system may be confirming the quantity in future date because of the forward scheduling. As you know system adds different times while evaluating the confirmed delivery date. Check the route which system is using.

Partial Quantity and Line item not showing in MIGO

HI All,
My User create STO and after save it is automatically created OBD and PGI through BARCODE now problem is at the time MIGO it is take partially quantity.when i going to do manually rest quantity it is not showing all line items.
Issue 1. It is showing only one line item instead of two line item Qty.
2. When i am going to select purchaseorder at migo instead of OBD its showing two line item.
Please suggest what to do.

HI Please check i am sending screen shot

Line item confirming issue

Similar Messages

Maybe you are looking for