Line item details of Recon accounts

Hi
Recon accounts are not created as line item managed,
But for a specific requirement if the business wants details of the line items of all the recon accounts hw this can be achived?
Will it be possible to view the line item details of the recon account (say debtors account) of previous entries.
We are in ecc 6.0 without New GL.
Regards

Hi,
for the recon account, in FS00, control tab, check/tick 'Line item display' and then check that recon account report.

Similar Messages

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

Report Painter - Totals are different on face of report & line item details

Hello,
We have a report designed in report painter. Thye lIbrary table is GLPCT.
When we run the report system gives e.g. 100 $ on face of report. However when we double click on that line to get a line item details reoprt the value is different. It is either less or more than the amount diaplayed on initial report.
Please can you suggest what coule be the probable reason for this anamoly.
Thaks & Regards
Shreenath

Hi Sreenath,
when you double-click on a line you are jumping to another report.
The report you are jumping to has either been defined as a linked report by you, or it has been copied from an original SAP-report if you started the creation of your report by copying a standard SAP report.
The sending report tries to pass on all the selections for the cell you double-click to the line-item report. For standard SAP reports it is guaranteed that this should work and the line item report gives the sames results as the report you are calling it from.
For self-defined reports, this may not always work. I have had problems especially when calling line-item reports from sum-lines of my self-defined report. The reason was that the selections could not be passed on properly.
Example:
line 1: selection on account X and profit center A
line 2: selection on account Y and profit center B
line 3: sum of line 1 and line 2
Now, when I double-click on a cell of line 3 and jump to line items, it passes on the selection idependently, i.e.
accounts: X, Y
profit center: A, B
the line item report now gives me all values for all combinations of accounts X and Y and profit centers A and B.
It does not take into account the combined selections in my original report.

Copying g/l balance and line items details

What is the best way to copy account balance and the line item details from one G/L account to another one.
Thanks

Hi
The best way to upload GL open items and GL balance is via FB01.
Good Luck
Hari

Customize Line Items Details Loading for Multiload TEXT-Based

Hi all,
has anybody customized HFM adapter to enable line item details loading for Text-based multiload files?
Is it possible?
Thanks

But then we wouldn't have one text multiload file but several text files that will be converted into several .dat files to be loaded into HFM.
Our current problem is that we have a multiload text file (we can convert from the Multiload Excel) but this file contains line item details. We want to keep the performance of loading only one .Dat file, but also load line item details.
What about if the user split the multiload files into two:
* Excel Multiload just with Line Item accounts (there are not so much)
* Text Multiload for standard accounts
This would be a nice solution as well? If they are happy....
Thanks

Printing GL line item detail - FAGLL03

When printing a GL line item detail report like FAGLL03 or FAGLB03 with multiple GL accounts I always get a separate printed page for each GL account and for the total no matter how little detail is displayed. I can print all on one page if I sort by GL account but this removes the account number and description for each group and I need that for my users.
Is there a way to print these GL detail reports where GL accounts are still separated with the account number and description shown above each section but will print continuously, without page breaks between accounts? I don't see anything in the Print setup other than removing the AVS Statistics cover sheet which was a help.
Thanks for any help,
Jeff

Thanks Troy,
I just tried that and I see the results are displaying differently but it still prints each section on a different page.
Thanks,
Jeff

Tracing the line item change in a accounting document

We have to send accounting document line items details which have been created or changed to non-SAP system.
I am looking for way to identify the line items which have been changed as I don't want to send the other line items of the accounting documents which are not changed.
Thanks.

Shailendra,
You've hit the nail on the head - CDHDR and CDPOS are the central repository tables that contain all changes - wherever logged.
There's no other way.
P.S.: I'm assuming you know how to extract data from these tables - so am not going into it.
Remember to assign points if found useful.
Regards
Gulshan

Reporting line item detail from smartview

Hi All
We have several line item detail accounts set-up - can you drill down into this information in smartview?
Many thanks for any thoughts / suggestions

Hi,
According to Smartview documentation, this is possible only if using Planning. Impossible to get line items when working on Financial Management.
Hope it helps,
Lionel.

Enabling Line-item Details

HI Folks
I am trying to test the feature called Line Item details. At the moment all accounts have this set to No. I ttried to change this on an existing accounrt to Y and load but I got an error message saying refrential integrity. I then tried to create a new account and uploaded this. It loaded burt when I went to a data grid and rightclicked there was no option for line items so I thought I might be missing something.
I looked in my admin guide and there is another section in the metadata on the scenario which has the same attribute so I changed this to a Y but again when I try to reload I get the Refrential integrity error.
Has anyone tried to set this up before particulary on existing accounts. Does the scenario also need this enabled or does that attribute refer ro something else. I havent used this featurre before but looks like it might be useful. Any help/advice is most appreciated
Thanks
Tahir

The referential Integrity check come because you may have some data in the existing account as well. As this account did not support Line Item Details previously. So what you need to do is while loading metadata you check clear all metadata before loading. This might help you.
Yes this needs to be enabled for the scenario in the metadata.
Hope this is helpful
Varun

Line Item detail in HFM in FR Reports

Hi
Is it possible to draw a report in FR to display the line item details as input in HFM?
The users will be adding the line item details, and we want to have a report giving these entity wise using FR.
Rgds

Yes,
Here are the steps
Displaying Line Item Detail for Financial Management
For Financial Management database connections, a Financial Management user can select if they want to display line item detail for rows only on Account dimensions. A user can also select the location of the line item detail; before or after the parent member of the line item detail. To display line item detail, all dimensions must be set to a Level 0 member.
To display line item detail for Financial Management:
Open a report and select a row in the grid.
In the Row Properties Sheet, select Display Line Item Details.
Optional: On the Grid Properties sheet, select the Position category and do one of the following in the Position of Line Item Detail box:
To display line item detail before the parent member, click Before Members.
To display line item detail after the parent member, click After Members. This is the default.

PO: Combining repeating line item info with individual line item detail.

I want to simplify the display PO t-code ME23N (and ultimately create and change) and I want to have a scrollable table with the line item info but I want to include in that scrollable table details that are only available on the item detail sub-area, e.g. account assignment info.
Is this possible?
Regards.
Patrick.

I assume this is a Personas question?
That's not possible with Personas. You can't add extra columns to standard tables, nor create custom tables. You'd need to modify the underlying SAPgui transaction in the usual way and then simplfy that. How easy it will be to modify ME23N I have no idea - you'll have to ask over in the ABAP Switching, Enhancing, and Adapting Standard Programs space. I will say that some of the line item details are hard to include in the line item table, and account assignment is one of them - how to you represent split account assignment, for example?
Steve.

Line Item Details on WebForms

I have a form with scenario 'Actual' with default view as YTD.
For an account which is enabled for Line Item Detail in th emetadat, i need to enter data Quarterly
So we have 3 columns
Q1 ( which is basically June month underneath)
Q2 ( which is basically Sep month underneath)
H1 (which is half yearly)
Now my sales for Q1 is 1000 and Sales for Q2 is 2000. When I enter the data, H1 shows as 2000.
Becasue the 'Line Item Detail' is always entered to '<Scenario View>' which is YTD in my case.
Is there any way to get around this. I cannot have 'Line Item Details' for any other View other than <scenario view> or 'Periodic'.

If I understand the question, you are expecting H1 to be 3,000 as Q1 (Mar-Jun) activity was 1,000 and in Q2 (Jul-Sep) is 2,000?
If this is the case you should not be entering "Q1" Jun and "Q2" Sep as YTD. The reason why you are seeing H1 with a value of 2,000 is that you entered Sep "YTD" as 2,000. If you wanted to show that you had 2,000 of activity in Q2 and you wanted to enter data at YTD, you'd need to enter 3,000 there. Assuming the default frequency supports it, you should enter "Q1" and "Q2" QTD and then set H1 to show Sep YTD. The POV View would be set to QTD and then you would use the OVERRIDE option on the 3rd row so that it changes the view to YTD.
R3=A#YourAccount,Override(3,3,w#YTD)

Unable to see line items in segment clearing account

Friends,
Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item and line item display.

Hi,
I have received the following error message.
Account 1999990, company code xxxx is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

SAP Note 1486147 - TDS line item details not flowing in Form 16 A Samrtform

1.     Old Form 16 certificate is printed before 01.04.2010 and new certificate after 01.04.2010. (its correct SAP has written code in such a manner Old one is SAP script and new on is Smartform.)
Old FORM 16 A gets Acknowledgement No details correctly.
2.     Acknowledgment No details are not flowing in the NEW Smart Form of Form 16 A.
When I debug the program I can see PARTNER No details are copied in PAN NO field in TABLE : IT_LFA11[]
BUT PARTNER NO details are copied to PARTNERNO field in TABLE IT_LAFA1[].
TDS line item details on Smart Form is printed based on Partner no. here partner no. is blank as IT_LFA11 table is passed to smartform..
Program name : J_1IEWT_CERT
Include name : J_1IEWT_CERT_F01.
Code:
FORM CALL_FORM .
DATA: h_formname TYPE tdsfname,
          h_fmname TYPE rs38l_fnam,
          h_output_info TYPE ssfcrescl,
          h_spoolids TYPE LINE OF ssfcrescl-spoolids,
          h_output_options TYPE ssfcompop,
           spoolno(10) TYPE c.
DATA : it_lfa11 TYPE STANDARD TABLE OF J_1I_LFA1 INITIAL SIZE 0,
         it_printtab TYPE STANDARD TABLE OF J_1I_PRINTTAB INITIAL SIZE 0,
         it_deduc TYPE STANDARD TABLE OF J_1I_DEDUCTEE INITIAL SIZE 0,
         it_qrtrtab TYPE STANDARD TABLE OF J_1I_QRTRTAB INITIAL SIZE 0,
         it_challan TYPE STANDARD TABLE OF J_1I_CHALLANDETAB INITIAL SIZE 0.
SORT challandetab BY j_1iextchdt DESCENDING.
it_lfa11[] = it_lfa1[].
it_printtab[] = printtab[].
it_deduc[] = it_deductor[].
it_qrtrtab[] = qrtrtab[].
it_challan[] = challandetab[].
h_output_options-tdnewid    = 'X'.
h_formname = layout.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = h_formname
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
   IMPORTING
     fm_name                  = h_fmname
* EXCEPTIONS
*   NO_FORM                  = 1
*   NO_FUNCTION_MODULE       = 2
*   OTHERS                   = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION h_fmname
EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
   OUTPUT_OPTIONS             = h_output_options
*   USER_SETTINGS              = 'X'
IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
   job_output_info            = h_output_info
*   JOB_OUTPUT_OPTIONS         =
    TABLES
      it_lfa1                    =   it_lfa11
      it_printtab                = it_printtab
      it_deductee                = it_deduc
      it_qrtrtab                 = it_qrtrtab
      it_challandetab            = it_challan
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5
IF sy-subrc = 0.                                          "1375614
    CLEAR :spoolno,h_spoolids.
    READ TABLE h_output_info-spoolids INTO h_spoolids INDEX 1.
    IF h_spoolids IS NOT INITIAL.
      spoolno = h_spoolids.
      CONDENSE :spoolno.
      MESSAGE i155(id_wt) WITH spoolno.
      PERFORM update_cert_tables.
    ENDIF.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Can anyone Please help me to get TDS details on the Smartform.
Regards,
DivyaLalwani.
Edited by: kishan P on Feb 23, 2011 1:28 PM

Hi,
Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
Please checkout related notes and data population in the dibugger.
Regards,
Umang Mehta

Work Order to cost center settlement with line item detail

Iu2019m having difficulty finding a method to settle from a work order to a cost center with line item detail. When an order is settled with KO88 or KO8G the total value for that work order/cost element combination is combined and posted to the cost center as a lump sum with the description of CTR\######. Users would like to see the individual values that posted to the work order in a cost center report such as KSB1.
I donu2019t see anything in the settlement rule, settlement profile or allocation structure that will allow line item settlement from work order to cost center. Is line item settlement possible when settling to a cost center? Is there an alternate way to see these expenses as line items in KSB1?
Thanks,
Jeff

Thanks Christian,
We've defined an allocation structure that we use for Project System and Work Order settlement and have Receiver Categories established as FXA, CTR and WBS with "by Cost Element" checked. Work order costs do settle to the cost center entered in the settlement rule, the problem is it combines all items values as a single amount when posting to the cost center.
For example:
expenses post to the work order under cost element 500000 for $500, $200, $300 and cost element 600000 for $250 and $250. The settlement rule says to settle to cost center 170000. When the settlement takes place cost center 170000 is debited $1000 to cost element 500000 and $500 to cost element 600000. We would prefer to see individual posting of $500, $200, $300 to 500000 and $250, $250 to 600000.
Thanks,
Jeff

Line item details of Recon accounts

Similar Messages

Maybe you are looking for