Line item display for Segment Clearing GL account

In my scenario, document splitting is activated and zero balance is set for profit centre and segment.  I have assigned a GL account for automatic posting for segment clearance for posting.  I have posted few transactions and the document shows the posting happened to this Segment Clearing account.  However, when I want to view the line items posted in this account, system does not show the line items eventhough this GL is set up with line item display.

Thanks for the reply.  But using this tcode also, it is not possible to display the line items.  I reproduce the message issued by the system while I am trying to view the line items of this particular account:
"Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected."

Similar Messages

  • Line Item Display for Gl, Vendor & Customer Accounts

    is there any standard report which gives line item details upon running it and not after going through the process of selecting the document listed by the report and then veiwing the line items..?

    Hi Kedar,
    Please see the below Tcodes.
    FBL1    Display Vendor Line Items
    FBL1N   Vendor Line Items
    FBL2    Change Vendor Line Items
    FBL2N   Vendor Line Items
    FBL3    Display G/L Account Line Items
    FBL3N   G/L Account Line Items
    FBL4    Change G/L Account Line Items
    FBL4N   G/L Account Line Items
    FBL5    Display Customer Line Items
    FBL5N   Customer Line Items
    FBL6    Change Customer Line Items
    FBL6N   Customer Line Items
    if u feel it is useful award points by way of thanks.
    Nagesh.

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Customer number needed in "GL a/c line item display" for customer gl?

    Hi SAP Experts,
    while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
    How can i solve this problem?
    Plz guide me.
    I need a quick response.
    Regards,
    Biswa

    Hi,
    Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
    If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
    special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
    I hope these helps.
    Regards
    Ravinagh Boni

  • Line item display for Internal Order

    Hi All,
    What is the transaction code for  Internal Order line item display.
    Thanks,
    Misbah

    Hi,
    Its KOB1 to KOB4.
    Rgds.

  • Multiple line item display for PAYMENT ADVISE form(script) using F110 tcode

    Dear All,
    I am currently working on PAYMENT ADVISE script ( form ) - for which i have copied the
    form F110_IN_AVIS to zform.
    I am executing the form for output through executing Tcode - F110.
    The output works for single line item entry of vendor line items - but doesnot support
    for muliple line items.
    I have checked the standard program - RFFOUS_C - which has include - RFFORI06 for remittance advice -which supports for single line item display.
    Kindly advise me for the soultion of the same.
    Regards
    HC

    Hi,
    Do you manage to fix it ?
    we experienced the same problems (mass printing smarforms F110), we would like to use one time F110, and generates all the spool, for all the line items.
    Thanks
    Any help would be grateful.
    Thomas

  • Text blank in Customer line item display for credit notes

    Dear SD gurus,
    We are creating credit memo request in SAP and credit notes are created later on. Now when we look the customer line items, the credit note number is seen over there. But the text field is coming blank. We want to enter some text in the credit memo request and the same should be displayed in the customer ledger i.e., customer line items.
    Kindly suggest some solution.
    Thanks in advance.

    Hi
    Can you elaborate more? Is it that the text is not getting copied form Refernce document to subsequent document ?
    Regards
    Deepak

  • Line item Display  for G/L Account Regarding report RFSEPA01

    In transactions reports: FBL3N and FS10N I have differents accounts balances display.
    I already had tried to execute the RFSEPA01 but it shows RUNTIME ERROR ..Somebody knows a program to equal these .
    please treat this as a urgent..

    hi can u give me solution for this iam facing same problem
    thanks
    raju

  • GL line item display FAGLL03 Offsetting Account Blank

    Dear All,
    In T-code FAGLL03 GL line item display offsetting account is coming Blank, how to get the offesetting account in GL line item display, what is the offsetting account
    Regards
    KSP

    Hi,
    It is diffcult to get offsetting account details in standared reports. by using BTE you can able to achive.
    Read: OSS Note 112312
    Refer: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&overridelayout=true
    what is Offsetting A/C:?
    Ex: Administration Exp a/c dr (GL:5000000002)
           Bank A/C (GL:100000004)
    If user execute Admin Exp GL(5000000002)  report, he will expect another line GL account (GL:100000004).
    Regards
    Viswa

  • Line item display problem FS10n

    Dear expert ,
    after run program RFSEPA01 to activate line item display in account xxxx. The display is FS10N  for 2011 is document in year 1997-1998.it should be line item balance for 2011.
    How to correct this problem?
    Kindly your advice.
    Thank you

    Hi,
    I would like to display line item display for cumulative balance  in FS10N.
    How to get cumulative balance line item in FBL3N?
    This is error after run program RFSEPA01
    Kindly advioce
    Thanks

  • Populate Assignment Field in G/L line item display (FS10N/FBL3N)

    Hi All,
    I am using FS10N to see G/L Account Line Item Display.
    I am seeing the Report Display with Coloumns like Doc.No., Type,Doc.Date,Amount in Local Currency etc etc
    There is coloumn showing Assignment.The entries are not getting populated/displayed under the same coloumn of Assignment
    When I go to Change Layout I see th Assignment field but the nothing is getting dislayed under the Assignment coloumn when I run FS10N/FBL3N.
    How do I solve the above problem?
    Thanks
    Vivek
    Edited by: VIVEK KAPOOR on Dec 11, 2009 4:11 PM

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

  • Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

    Steps done:
    1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
    2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
    3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
    4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
    5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
    I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
    Please help. Thanks.
    Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

  • Segment Clearing A/c (GL account)-Line item display

    In our case new GL is active with segment clearing scenario.  The Segment Clearing A/c (GL) is maintained as line item display and open item.  However, when we view it from FS10n, period-wise balance is there but when we click on, no line item drill down is not displayed.  What is the solution to get line item display ?

    Hi,
    When you create Segment clearing account, line item display should not be ticked in FS00, only then you will be able to see the line item display.
    There is a standard SAP not also on this issue. I dont remember the note but you can find it in service.sap.
    You also do not need to keep it open item managed.
    Regards,
    SAPFICO

  • Profit center clearing accounts line item display

    Dear all,
    I have implemented  document splitting at  profit center level.
    The zero balance clearing account (profit center clearing account) is open item managed and also line item display tick is  put. eg both ticks are active.
    I am trying to see the line items in the account using fbl3n,fs10n etc but am not able to view the line items althought the balance of the account is  visible in fs10n.
    the message i get is 'no line item selected'.
    Pl suggest some way through which i can see the line items of the profit center clearing account.
    Regards,
    Rishikesh

    Dear Venkatesh
    I am also facing same problem, I am using T Code FAGLL03 to display Line Items for Zero Balance Clearing A/c but I am not getting line item display instead it is giving following error.
    =========================================================================
    “Account 141010, company code VALC is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 141010 in company code VALC as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
    =========================================================================
    Please do suggest me.
    Thanks in Advance
    Regards
    Ratnakar

  • GL display for inventory account which are not defined as line item display

    Hi All,
    We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
    Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
    Can we get the report in MM module line items wise display.
    Regards
    Prashant P. Zinge

    Hello,
    You should use RFSEPA01 program via execute SE38 transaction.
    This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
    Regards,
    Burak

Maybe you are looking for