Line item number not appearing in BE_OBJ_ITEM field in Table BBP_PDBEI

Hi SRM Experts,
We are on SRM7.0 (SP09) using classic scenario (SAP R/3 backend 4.6C). Since last few days, we are observing strange behaviour when SC is approved and transferred to backend. The SC remains in status I111(Item in transfer). The reports clean_reqreq_up and bbp_get_status_2 does not help.
What I've observed is in BBP_PD, table BBP_PDBEI, the field BE_OBJ_ITEM is not updated... but all other fields are properly updated.
BE_OBJ_ITEM
BE_OBJECT_TYPE BUS2012
BE_OBJECT_ID 7100000149
As a result, even re-transferring the SC using BBP_REQREQ_TRANSFER does not help..
This phenomenon is not appearing for all SC's but some SC's ...
Can someone suggest any solution to above issue ?
Thanks and Regards,
Ram

Hi
Please delete the status I1111 for this SC from table CRM_JEST in Debug change mode and than exe FM # BBP_REQREQ_TRANSFER
This is only aworkaround
Regards
Trinath

Similar Messages

Line items are not appearing while processing F-44

With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
Please help

Hello,
There are two line items in the Vendor account, the details are as follows:
Date             Amount                  PK                 DR/Cr
31.03.2008   12,050.00                38                      Cr
05.06.2008   12,050.00                28                      Dr
of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND"

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Line item 1 not appearing in PO

Hi,
User created many POs with reference to one PR(a/c assgnmt K).
2 of the POs are not showing line item1 when the user tries to edit the POs.
Pl advice for resolution.

Hi,
Check whether the data is updated in table.
Goto SE16N > Enter table name as EKPO > Enter Purchasing document number > Enter line item number > execute.
Check the datas are there.
Regards,
Prabu

Line items are not appearing in F-32

Dear All,
There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
Regards,
Rupa.

hi,
as seen from above mails,
entries are existing in BSID table
entries are passed as part of period end closing entries
entry passed in month end and reversed in next month
proposed sol
1. check the mode of passing the entry in tcode
if tcode is coming from FBS1 the entries will not appear in F-32
if 1 entry in FBS1 and other entry in F-32 then automatic reversal entries were not passed.
there was manual entry.
that is the reason 1 entry in FBS1 and other in F-32.
Thxs,
GB

PO Line Item Number not filled in BSEG Table

HI,
While posting to goods receipt through MIGO FI documents are generated.
For these FI documents , in BSEG table the corresponding PO line item numbers (EBELP )are not getting filled up,
How can they be filled. can it be done through any standard configuration?

Hi,
Check if you are doing the summarization of FI doc. You can check reading these notes:
SAP Note 36353 - AC interface: Summarizing FI documents
SAP Note 77161 - Summarization of FI postings w.ref.to purchase orders
I hope this helps you
Regards
Eduardo

Sales Order-Line Item Number Field not Appearing

Dear All
I have an issue in which, in sales order, the field where I enter material, I am not able to see the line item number.
For example; if the Material X is entered, I cannot see the item number as 10.
Can I know what might be the problem.
Thanks and Regards
Adithya

Hi,
Check item category determination (VOV4) whether the item category is determine with the combination of material item
category group,untill the material being read by the system it will not give the line item no,and also check at VOV8 for your doc
type Item no.increment Ex: 10, is maintained or not ,if not maintain and try.
Regards
Ram

Balancing field "Profit Center" in line item 001 not filled in vendor post

Dear Experts,
Document Spitting is activated in our system. Now in Vendor posting we are getting the error " Balancing field "Profit Center" in line item 001 not filled ". Please provide your suggestions on this.

Balancing field "Profit Center" in line item 001 not filled error is coming due to splitting .Try to do the following and check ...
First check the line item 001 and get the GL no for which GL you are getting the error.
Goto PCP0 and double click on Document then goto Settings -> Layout -> Change here select Document Line Number ......check the line item 001
Ask your FI persons and get the required profit center or default Profit Center for that company code.
Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area is there in both the ITs.
Mohan

J1IEX- ng field profit centre in line item 001 not filled.

Hi friend,
i m getting the following error while posting the excise invoice...
J1IEX - Balancing field profit centre in line item 001 not filled...
I hve already checked that profit center is maintained in mat. master.........
Plz. help......
Rgds,
Navin

Hai,
what's the message number?.

Balancing field "Profit Center" in line item 001 not filled

When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
Thanks in advance.

Hi Kiran,
Could you tell me how you are able to resolve this issue as we are having the same issue.
Did you use the substitution rule?
Please let us know.
Thanks,
Madu

Bal field "Profit Center" in line item 001 not filled at the time of F-53

We are in ECC6
I have posted a vendor document. The entry is shown as under.
     GL                           CC     PC     Segment
Dr     Expense GL-1     RV01     RGV1     Hyderabad
Dr     Expense GL-2     RV02     RGV2     Mumbai
Cr     Vednor a/c
but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
I have check ed the configuration setting in this regard. Zero balance, mandatory fields for profit center and segement check box is enabled. And also the inheratence check box is also enabled.
Pls suggest soulution soon for the above problem.

Hi,
Try to default the profit center in FAGL3KEH for the Bank account and try posting.
In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
Try to assign a default profit center and check.
Regards
Hari

T-code: F-02 (Balancing field "Profit Center" in line item 001 not filled)

Dear Experts,
I am getting following error while i am doing transfer by using t-code F-02.
"Quote
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
u2022 No value can be derived for this field from the current document data.
u2022 You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Unquote"
Where do you thing the mistake is and what i have to do? Please resolve my problem.
Thanks advance,
Best Regards.
Ripon Kumar Paul

Hi
Balance Sheet Accounts are required to be split in case you have document splitting activated u2026.. and in your case the profit center is made mandatory for the documents to get splitted u2026.. and the profit center would be derived from cost centeru2026u2026u2026. therefore to split the document by using document type u2013 SA through F-02 we need to do further settings, i.e., you need to configure u201CExtended Document Splitting Configurationu201D
For example: Rent expenditure is been posted which is having more than 2 Debits and consisting of different Cost Centers and posting to Rent Payable A/c which is a Balance sheet A/cu2026u2026.
Path: Financial Accounting (New) - - General Ledger Accounting (New) - - Business Transactions - - Document Splitting - - Extended Document Splitting -- Define Document Splitting Rule
Define your Business Transaction variant and for that variant define document splitting rule u2026u2026u2026.. where in you need to activate Automatically split check box for the desired categories.
Regards,
Sathish

Balancing field "Segment" in line item 001 not filled while posting through

HI All,
I am experiencing the below error while processing FB70 transaction in Foreign currency with Tax codes (earlier this problem was not there, this is happening recently). The error description as given below.
"Balancing field "Segment" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose."
I have verified all the relevant settings like Classify G/L accounts for document Splitting and Document types etc and all settings are seems to be ok.
But in the below two instances, Iu2019m not getting any error:
If posting is done in company code currency with same tax codes.
If posting is done in foreign currency without tax codes
Your early respons is highly appreciated. Thanks in advance.
Thanx & Regards
Ramesh

Hello
Have you chosen Segment as Mandatory for the Scenarios during Document splitting. If not then for the G/L account you are facing problems with goto the field status and make segment field optional.
Thanks and Regards

Balancing field "Profit Center" in line item 001 not filled in VF02

Hi,
While releasing a billing document to accounting, we are getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
Let me give more details about this.
We are in a retail implementation. Transaction combining cash and credit are normal in retail scenario.
Normally SAP billing document type is RV which does not allow item category 04000 which is cash.
To counter the above, we have created a document type YV with unspecified posting and assigned to SD document type BV(which is cash memo).
The billing documents with 2 line items with different profit centres, with SD document type BV when released to accounting is giving this error.
Any suggestions.

Hi all,
This transaction Iam also trying to post in FI directly.
The entry I am posting is
Dr   Cash 1000
Cr   Sales 500       PC X
Cr Sales   500       PC Y
I want the cash account to be split with PC X 500 and PC Y 500. I am getting the same error.
Can some one please guide. I have assigned cash account with item category 04000.
Thanks
Aravind

Balancing field "Profit Center" in line item 002 not filled and VF02

Dear All,
Below mentioned error we got in VF02 while releasing the billing to Accounting document.
In this case SO has created. Later with out delivery has been created Billing ( VF01) And Later Releasing through VF02 ( For only 1 specific Billing type )
But we have CRM Integration also from CRM 7.0 TO ECC 5.0 ( New GL Is there in ECC 5.0)
Here alternative solution is there i.e In OKKP T code if we deselect Profit center Button Issue will be resolved from SD side ( PC Issue )
Then problem will come to CRM with another message as ( Account-based PCA not active in year 2011 in controlling area 1001 (Notification I KM 029) Message no. CRM_ORDER_MISC 060)
Balancing field "Profit Center" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 002, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Please help on same.

Hi
If i am selecting that indicator in 0KE5 Problem will be resolved in CRM.
But VF02 Is getting this Balancing field "Profit Center" in line item 002 not filled problem.
With out selecting that indicator please suggest. From Last 5 years we are using this Production System.
0KE5 indicator has not selected from 2005 to 2011 also.
CRM Is is process. we have selected in QA, But problm occurs to VF01 and CRM Process.
Simply if i select 0KE5 CRM problm will resolved.
Later SD Problem will come into the pictute.
Note: In PD1 System we hav not selected for 2011 also.
Pls put more inputs.

Line item number not appearing in BE_OBJ_ITEM field in Table BBP_PDBEI

Similar Messages

Maybe you are looking for