Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Similar Messages

  • Line items are not appearing while processing F-44

    With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
    Please help

    Hello,
    There are two line items in the Vendor account, the details are as follows:
    Date             Amount                  PK                 DR/Cr
    31.03.2008   12,050.00                38                      Cr
    05.06.2008   12,050.00                28                      Dr
    of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND"

  • Line items are not appearing in F-32

    Dear All,
    There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
    Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
    Regards,
    Rupa.

    hi,
    as seen from above mails,
    entries are existing in BSID table
    entries are passed as part of period end closing entries
    entry passed in month end and reversed in next month
    proposed sol
    1. check the mode of passing the  entry in tcode
    if tcode is coming from FBS1 the entries will not appear in F-32
    if 1 entry in FBS1 and other entry in F-32 then automatic reversal  entries were not passed.
    there was manual entry.
    that is the reason 1 entry in FBS1 and other in F-32.
    Thxs,
    GB

  • Special characters in SBWP dynamic columns are not showing for some users

    Hi experts,
    We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
    Are there any workflow/user settings need to be changed.
    Thanks
    Gopal

    I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

  • DateTimeControl Not Appearing for some Users

    Hi,
    I have the DateTimeControl on SharePoint web part. It works fine for most people but for others the calendar selection button does not appear. Only the textbox appears.
    Why is this?
    Thanks!
    using Microsoft.SharePoint.WebControls;
    protected DateTimeControl dtc = new DateTimeControl();
    dtc.LocaleId = 2057;
    dtc.DateOnly = true;
    dtc.DateChanged += new EventHandler(dtc_DateChanged);
    this.Controls.Add(dtc);
    dtc.RenderControl(writer);

    Hi,
    We can do as follows:
    1. We can create a new user with the same permissions as the user who can not see the calendar selection button.
    Then use the new user login site and see whether the issue occurs.
    2. Use the new user to debug your code.
    3. Use IE8 to check whether the calendar selection button appears.
    Here is an example for your reference: 
    Using the SharePoint date control in a web part
    http://www.sharepoint-tips.com/2007/10/using-sharepoint-date-control-in-web.html
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • MAM application is not working for some users

    Hi All,
    Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
    If I use different user on the same device I can see the MAM application and MAM data.
    What could be the wrong in this case. Any help would be highly appreciated.
    Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
    Middleware:SAP NetWeaver 2004s with Patch leve 15
    Backend:SAP ECC 6.0
    Application:MAM 3.0
    Thanks and Regards,
    Ameer.

    Hi,
    from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
    For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
    You need to solve this before you can go any further.
    Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
    Regards,
    Larissa Limarova

  • Asset Line items are not updating in table ANEP

    Hi friends,
    I found that asset line items are not getting updated in ANEP table,.
    This is my precedure for posting of depreciation.
    I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
    In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
    Where is the mistake in my process..
    thanks in advance..
    Naveen

    HI Naveen
    The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
    ANEA should be the solution you are looking for.
    Hope it helps!
    Cheers
    Z

  • Line items are not coming on next page in Bill of Lading

    When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
    I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
    Kindly help me to resolve the issue as it is very critical.

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Error M8-688 - Creation of several vendor line items is not possible for document type RN.

    Hello All,
    We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
    Thanks,
    Chandu.

    I dont think that there is any way because it is a hardcoded error message.
          IF NOT t003-xnetb IS INITIAL.
            MESSAGE e688 WITH pi_rbkpv-blart.
          ENDIF.
    SAP is checking the customizing for net/gross posting per document type in table T003
    And if it is set up as net, then it is a hard error.

  • Services for object box not visible for some users

    Dear All,
    PM module experts please help. In equipment master transaction IE02  in left hand top corner we get  box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem  is it is  not visible for some users.  Our security/authorisation team has also done some check but didn't get any solution.
    anybody knows the reason why there is no box availabe?
    Thanks
    SR

    Dear Siddhartho Raha
    I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
    note are like this way 492331,this is not related to your query but same like it is and also may be
    Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
    Hope this may helps you
    Prem.

  • IDoc message Document or line item does not exist for invoice reference

    Hello,
    We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
    Regards, Jan

    This is just a guide.  Adapt it to your situation.  I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order.  In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
    You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
    Elias

  • Call items are not created for Org BP's when created from Campaigns

    Hello All,
    We are creating Campaigns for Org BP's and pushing them to channel Phone, which is creating call list but call items are not created for Org BP's.
    Org BP's are maintained with Contact Person's, callling hours and phone number are maintained against contact person BP, but still call items are not created with in call list.
    Please let me know if I miss any further steps.
    Thanks,
    Raj.

    Hi Debasis,
    You can delete the PDS by using /SAPAPO/CULL_RTO_DEL - Delete Production Data Structure . And recif the it to APO. You can use CURTO_CREATE for it.
    For the error message /SAPAPO/OM_ERROR2 119 there are couple of OSS notes please check the same.
    1648558 - CIF error: 'Mode linkage problem with primary resource'
    1325227 - PDS-EXP: Mode linkage problem with primary resource
    Regards,
    RBrahmankar

  • Why new contacts are not appearing after some time?

    I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.

    Hi, 
    Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • All open items are not appearing in f-44 for vendor

    Hi friends,
    I am unable to find all open items in f-44 to clear vendor open items.
    I checked in BSIK, it has 3 line items and in FBL1N also having 3 line items.
    2 line items are debit and 1 line item is cr.
    Dr line items are appearing in f-44 where are Cr (Vendor cr (31) is not appearing in f-44,
    Please help me.
    Regards,
    suresh

    Halo,
          one of the document might be stuck in APP run.I mean proposal run.
    Regards,
    Praveen R Marati

Maybe you are looking for

  • I recieved this email....I think it is a scam.....just FYI

    It has come to my attention that you might have an interest in purchasing the operating system Windows 7 Ultimate SP1 Final version  SP1  & OFFICE 2013   I am selling Windows 7 Ultimate SP1 Final DVD --- the FULL Ultimate version. This is not the ret

  • How to use CALL FUNCTION '/1BCDWB/SF00000014' in smartform urgent

    hiiiiiiiii Iam doing classical report n i want my output to be printed in smartform. So my output is in IT_FINAL table.In smartform in Form Interface Table column i had declare ::: Parameter Name: IT_FINAL Type Assignment:LIKE Associated Type:ZSD_FIN

  • Need help locating backed up pictures and letters online

    I wrote a letter to my son using QuickOffice. Is it backed up with back up assistant and if so, where. If not,   how do I transfer this to the computer to print and mail the letter. He is in the Army Basic training so electronic communication is not

  • Creating a custom change document for a standard table field

    Hi Is it possible to create a change document for a field in a standard table? I have searched the forum and only found threads about creating change document to a custom table. Will the creation of change documents to a standard SAP table be a modif

  • A way to qeury Azure File Storage direct from Automation?

    Hello. I am trying to create a runbook that will query a list of files in Azure File Storage. This works fine from a powershell prompt on an Azure VM, but it appears the same methods in Azure Automation return different objects: Sample code to just l