Line shifts when I increase stroke weight

Hi,
I'm using strokes in a document. I have a series of lines that are centered on grid lines; however, when I increase the stroke weight, the line moves as if the top edge of the stroke is anchored and not the center of the line.
I am unable to find any setting to change this, but it is really making my work difficult. Can anyone help with this?
Thanks!

gleake,
In cases like this, the first guess is Align to Pixel Grid.
You may select everything and then untick Align to Pixel Grid in the Transform palette, and also untick Align New Objects to Pixel Grid in the flyout options.
You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

Similar Messages

Problems with Illustrator CS6 not accepting stroke weights with decimal points

So I have been using Illustrator for almost 10 years and have never run into this one. When enter a stroke weight on a line with a decimal point like .25 or 4.5 is keeps rounding the number up. For example I enter 0.75 and it makes it 1 point or I enter 5.5 and it makes it 6 point. Whether I enter the number manually or pick from the drop down (0.25, 0.5 or 0.75) it keeps rounding my strokes to even numbers. How did I do and how do I fix it?

Thanks from me too! Was also very frustrated by this.

How to adjust path stroke weight?

I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
http://stephenbuck.org/adobe/il-point-width/point-width.html
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.
Increase the stroke weight of the elipse.
Control-Z to undo.
Decrease the stroke weight of the elipse.
The above demonstrates I know how to adjust the path weight (at least I think it does).
Next, on the path that doesn't allow the stroke width to be reduced:
Select path.
Increase stroke weight to demonstrate it increases.
Control-Z to undo.
Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
And that's the problem.
What do I need to do to decrease the weight of the path I am trying to adjust?
Thanks,
Buck

Hi Jacob.
Yes, thank you and I've figured out what has happened. The layers panel included a layer titled "Meridians" and a sublayer titled "<Path>". Each item has an effect applied through the appearance panel, and that is what was causing the problem. I had been meatballing only the <Path> item in the layer panel, which is behind the Meridians layer item. Decreasing <Path> was not noticable because the Meridians layer item was the 5 point weight in front of it... I changed each item to contrasting colors, increased the weight of <Path> to 20pt, and then it was apparent that the Meridian layer effect was the item that needed to be resized.
Somewhere in this process I mistakenly applied the same effect to the Layer and the Path, and that's what caused my little dilemma.
Thanks to you and everyone else who participated in researching this problem. It's solved.
Buck

Why does my shape change when I change stroke attribute?

Hello,
I am having problems with my vector shapes automaticly changing shape (the position of every point that makes up the shape) when I increase the weight of the stroke or at color of the stroke. I hope that is clear.
For example: I have a Circle, then I change the weight of the stroke by clicking up on the arrows in the stroke dialog box. Every click up or down moves each point in a different direction. By the time I settle upon the weight I want, the shape is no longer a circle, but a abstract ameba shape.
Can anyone lend me some wisdom for what I can do to fix this problem?
Thanks a ton!

You select only part of the path instead of all of the path, that is some anchor points are selected, solid, as opposed to active but not selected outlined.
Option clickon the path withthe direct select tool or click on the center point to select the whole path with the direct selet tool or use the selection tool or drag a marquis with a selection tool to select the path and the anchor points
now you can move it with the arrow keys
oh I see you want to change the stroke weight you need to have the cursor active in the Stroke panels weight field in order for the weights to change so first select the path then click in the weight field of the panel.

How to stop changing stroke weights when changing the size of an object in CS5 on Windows 7?

I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) Does anyone know how to change this back?
Thanks!

Take a look at the Scale Strokes and effects preference either in the general programme preferences or in the flyout menu of the Transform palette.

[svn:fx-trunk] 7155: Line bug fixes when using gradient strokes

Revision: 7155
Author:   [email protected]
Date:     2009-05-20 14:39:39 -0700 (Wed, 20 May 2009)
Log Message:
Line bug fixes when using gradient strokes
SDK-21272 - Lines with gradient (LinearGradientStroke) draw as solid color if perfectly vertical / horizontal
StrokedElement was not taking the stroke weight into account when passing the bounds to the stroke. The gradient strokes rely on the bounds to help them transform the gradient to fit the shape of the stroke.
SDK-21274 - Line with gradient stroke does not draw properly
This bug occurs when the Line has a non-zero x and/or y values and is sharing a DisplayObject. StrokedElement was passing the stroke the measuredX and measuredY position as part of the bounds. Instead, I've changed it to pass in drawX + measuredX and drawY + measuredY which accounts for the drawing offset position.
QE Notes: Test Line w/ gradient strokes
Doc Notes: None
Bugs: SDK-21272, SDK-21274
Reviewer: Evtim
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21272
    http://bugs.adobe.com/jira/browse/SDK-21274
    http://bugs.adobe.com/jira/browse/SDK-21272
    http://bugs.adobe.com/jira/browse/SDK-21274
Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/StrokedEleme nt.as

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Maintaining Stroke Weight when changing path to brush stroke

Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
Can I change this? I am hoping I am missing something with an option or how I make brushes
Thanks!

dasikins,
When you apply a Brush to a path, the resulting width of the brush will be the basic brush width multiplied by the path Stroke Weight in points.
Presuming you wish to have a final brush width of 5pt and the basic width is 2.5pt, you will need a path with a Stroke Weght of 2pt because 2*2.5 = 5.
I wonder whether this is relevant or nonsense.

Stroke Weights when resizing

I have made a logo design which uses both filled sections and a 1pt weighted line.
But when I resize the logo the stroke weight doesnt shrink accordingly with the design so I have a massive fat line in the design.
I know theres a setting to choose to fix strokes to shrink or expand inkeeping with the design... How???

Thanks very much, you've just saved me a night of looking through Illustrator for Dummies :)
How appropriate :)

Adjust stroke weight when scaling problem

Hello,
I am having trouble with the stroke on an object changing when I scale that object. I have already read to uncheck "Adjust Stroke Weight when Scaling" but my problem is that option is grayed out in my "Transform" panel. When I go into edit>menus, there is an "eye" graphic next to it so it should be showing. I am trying to figure out how to make that show up so that I can then uncheck it, resize a photo and keep the same stroke weight at all times.
Thanks
Pat

Peter,
Thank you for your response, that was what I needed to fix the problem!
Pat

Keep stroke weight for EPS when scale it in InDesign

hi all,
Is it possible to have an object (in an EPS-file which generated by AI) with a stroke width that stays the same, when you scale the EPS in InDesign? if so, how?
thanks
AC
system: windows 7
InDesign CS6

Everything in the EPS file will change size when you scale it, either scaling it up or scaling it down.
A way to do it and it's not very neat is to copy and paste it from Illustrator into inDesign and scale it that way.
The better option would be to scale it in Illustrator to the size you want and the stroke weights you want and import that into InDesign.

Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's? New to iMovie. I have 3 titles that build. First is logo, add prod't name second line, add date 3rd line. They shift when dissolving between them. Title function NG for this.

Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's? New to iMovie. I have 3 titles that build. First is logo, add prod't name second line, add date 3rd line. They shift when dissolving between them. Title function NG for this.
The people at the Apple store gave me a long, tedious workaround which is open Pages and bring in logo. Export it as a PDF. Open the PDF in Review and then "Save As" a jpg to the desktop and drag and drop into the imovie. Even with this process, the text will sometimes shift. When it works, it looks good, the logo comes up, then the second line fades in under it as part of the build and then the third line completes the graphic. It would something this easy and straight forward would be easy.
HarveyV

I did the work around for the titles/jpg's in this short video.
I'll try your fix on the next one. I have 22 short 3-5 minute videos to produce
and I'm on number 5. This should save me a bunch of time.
It would appear that you know more than the guy at the Apple Store.
Thank goodness for on-line forums.
I already tried fixing them individually as you suggested,
by going the crop/fit route. However, even then,
the second in the series had always shifted.
The first and the third images lined up, but not number 2..
So I brought in all the images, (1, 2 and 3).
and then the 2nd image again and put it in the third position
in the sequence on the time line. I deleted the "original" 2nd image.
So I had 1, 3, then 2. Then I dragged and dropped the correct number two
into position two and it worked. So what happens is that the
client logo appears, then that stays put and the next line dissolves in
and then the third dissolves in. They are three separate titles, but they
are aligned perfectly so that they build as I dissolve between them.
I think the problem with the edit copy route would be that while
I could edit/copy the logo, I couldn't position text through the
iMovie text function exactly as it only gives you middle or bottom third etc.
Each title with the product name is positioned individually depending on
length and number of lines. By going through Pages, I can position the logo
and the text exactly. Also, some logos are horizontal, while others
are square etc., so text positioning is crucial.Anyhow,
I'll try the global approach for the next one and see how that works.
Thanks very much for your insight and especially for your prompt reply.
I trust you're inside on this gorgeous July 4th because you're
making money on your computer. ;-)HarveyVOn 7/4/2011 3:57 PM, Apple Support Communities Updates wrote:
> Apple Support Communities <https://discussions.apple.com/index.jspa>>>> Re: Anyway to "UN" Ken Burns stills globally or as default> bringing in jpeg's? New to iMovie. I have 3 titles that build.> First is logo, add prod't name second line, add date 3rd line.> They shift when dissolving between them. Title function NG for...>> created by AppleMan1958 > <https://discussions.apple.com/people/AppleMan1958> in /iMovie/ - View > the full discussion > <https://discussions.apple.com/message/15552380#15552380>> ------------------------------------------------------------------------>> I am baffled by what you are asking...but if you are asking how to > turn off the Ken Burns effect, you can do it for future photos you add > by going to File/Project Preferences and setting the default initial > photo placement to FIT or CROP rather than Ken Burns.>> For a global change on photos that are already in your project, pick a > photo. Open the Rotate, Crop, Ken Burns Tool. Select FIT or CROP. > Exit the tool. Now select this same photo and EDIT/COPY.>> Now, EDIT/SELECT ALL.>> Finally, EDIT/PASTE ADJUSTMENTS.../CROP ADJUSTMENTS.

Check Print:MICR Line placement shifted when upgraded from 12.1.2 to 12.1.3

Hi,
We have are upgrading to 12.1.3 tomorrow (from 12.1.2). In the test environment, we noticed the MICR Line shifted up and to the left y 1/2 an inch. Has anyone else had a simiilar issue? Also, is there a way to lock the placement of the MICR line in Check Template?
Thank you,
Patrick

Hi Patrick,
Is this printed PDF output from BI Publisher using PDF Publisher driver/style? If so, check that you paper is set the same in pasta_pdf.cfg under $FND_TOP
Regards,
Gareth
http://garethroberts.blogspot.com

Need some help in finding a specific stroke weight...

My preflight program is flagging illustrations with less than a .2 stroke weight and finding these instances can be a reall bugger. The preflight will give the >.2 value so I tried going back to the illustration and creating a line with the offending pt value and selecting same stroke weight but it won't select them. Once I have manually found the small stroke weight I've compared the two strokes for any differences but it won't select even when the color is the same and stroke=default appearance. Once I select the original line and do the select same stroke than it finds the other instances just fine. Anyone know whats going on? I'm using Illustration CS4 and the files are all .ai.
Any help would be much appreciated!

For anyone looking at thread I found a quick solution on the forum...
17. Jan 6, 2009 10:26 AM in response to: (Alesclandre)
Re: Thousands of paths take a huge time to treat !
> So what I wanted to do is to force all the paths that were thinner than 0.25 to 0.25. I think I can't do it inside Illustrator. But maybe I'm wrong ? 1. Line Tool: Draw a line. Give it a stroke of .01 pt.
2. Magic Wand Palette: Set Stroke Weight Tolerance to ".24 pt"
3. Magic Wand Tool: Click the line you drew in step 1. Paths with stroke weight of .25 pt or less should be selected. JET

"Save as PDF" stroke weight

When I save an Illustrator file as a PDF, the stroke weights often look substantially heavier than the original when the document is viewed in Acrobat or Reader. It almost looks like all strokes less than 1pt. are displaying at 1pt no matter how small they actually are. If I open the PDF in Illus. stroke weights are correct. Is there a way to fix this, possibly something having to do with transparency and/or flattening?
I often have files in which the same artwork is used both at full scale and substantially reduced, and the heavier stroke weights distort the appearance. Turning the strokes to outlines fixes the PDF display problem but screws up the source file.
Thanks, Susan

Found another related discussion thread (the phrasing was different enough it didn't show up when I searched the forum initially) which has this solution for the viewer:
"over on the indesign forum, someone suggested turning off the "enhance thin lines" option (in reader), and that does the trick. Unfortunately, other viewers won't know to do this without some instruction--- I wonder if there is some line weight threshold where the "enhance" effect kicks in?"
So I did a little test, looks like the threshold is 1pt. Made a test file with line weights of 0.1pt, .25pt, .5pt, 1pt, 2pt. At 100% zoom 1pt and everything smaller looked the same. At 400% zoom line weights looked proportional down to .25pt.
I wish there was a way to turn off the enhance thin lines option in the file itself.

How do I auto set stroke weight, stroke colors & fill color?

Hi,
I'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
Thanks so much.
Derek

Ponoko wrote:
Your first point - yes, that's what our system does currently. As a result designers get lots of 'how to fix' messages as a result of design rejections. We wish to reduce these rejections and resulting 'how to fix' messages by limiting their choices in AI - because this is where the problems are created.
Ok, yeah gotcha, so customers/designers think they do it right (cough/laugh) upload, then get surprised to find out they didn't by your upload system. That's kind of what I thought. I feel your pain. ;-) I sense you want to reduce this aspect to keep the customers/designers happy and thinking they do nothing but work magic all day right? ;-) So you don't want to lose customers in the midst of frustration of file rejection thinking there files are right and your system is certainly wrong, when in fact it's the opposite. Good luck explaining that to a designer however, right? ;-)
Ponoko wrote:
Your second point - You go on to talk about using a complex "action" we could distribute within the design templates. Although I suspect this is different, the path we're thinking is to include something in the templates that, when imported into AI, sets AI with the color palette we need, line weight we need. Possible?
As Monika hinted at you can't rigidly restrict or control what a user is allowed to do and use in Illustrator. You can try to reduce the parameters by saving the file as a Template.ait file, but even then they can muck about all day until they mess things up again, plus you have no control whatsoever even then as to whether they use fills, the stroke weights, etc. That is why I mentioned various things to manipulate the file once they deem it completed and ready to submit/upload. Basically a method to fix what they messed up or did incorrectly and instead set things as they should be for submission as I previously mentioned. I mentioned you may be able to create a complex Illustrator "action" action.aia that they run to process these requirements. I am not sure if such an action could be accomplished as all inclusive (perhaps though) otherwise you could as stated do it through scripting and a script they run: script.jsx to prepare the requirements, or an actual standalone helper app you create and provide like I mentioned above as well.
I see for CorelDRAW & Inkscape you require SVG, why not change that for Illustrator also so all your 2D app submissions are SVG based? Then manipulate the SVG server side, point out the changes and why and have the customer approve the new modified SVG Preview of the needed changes and move along with the process from there? Make all the requirement changes on the server by manipulating the SVG. You should have access to all of the requirements: RGB color model, stroke weight, stroke colors, fill colors, create font outlines, image tracing? I am just tossing out ideas here, get your programmers busy, tell them to stop playing video games and "make it so". ;-)
But even so, this then begs the question: What are you doing to circumvent the same issues for inept CorelDraw and Inkscape users?
Since, they have the same freedom to do things incorrectly and misaligned with the requirements, just as Illustrator users do.
Regardless though of the approach customers/designers may not like seeing certain things changed even minutely in trivial amounts and thusly be just as upset or up in arms with the changes to their pretty design files that they think were not needed in the first place, how dare you undermine them ;-). Same as seeing the file rejection from your system upon upload. Again I feel your pain. You have your Application/File requirements requirements stated nicely and plainly, it should be pretty easy for most, but sadly I guess not.

Line shifts when I increase stroke weight

Similar Messages

Maybe you are looking for