Lineshape problems when selected

Hey I need a little help w/ my line shape and shape container. I've looked everywhere on the internet and can't seem to come up with an answer.
Part A of the problem:
In my form I create a shape container container and add some lines to it (at runtime). However when I click on a line it gets selected and I don't want it to. Clicking another line will move the selection but I can't get rid of the selection. Any way to prevent this selection from happening.
Part B of the problem (may be a non issue if A is solved)
My design is located in a panel w/ scroll bars. Once one of the lines get selected the scroll bars reset to the top and left . I can then move the scroll bars back to wherever I want them but clicking anywhere in the form or minimizing/restoring the form also resets the scroll bars.
Problem B is related to Problem A but I can't figure out how to solve either!
Suggestions??
-Jesse

As mentioned by Michael, you should ask in the
Windows Forms General forum
Also, responding to a thread that's over 5 years old will rarely provide any answer....
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • Problem when selecting ITunes File "ITunes Library.itl" cannot be read because it was created by a newer version of ITunes? Need help!

    Issue when selecting ITunes - File reads "ITunes Library.itl" cannot be read because it was created by a newer version of ITunes.
    1. Re-installed ITunes and problem still exist, and
    2. Re-installed earlier version of ITTunes (10.3) problem still exist
    Need help!

    Finally (after extensive searching) found a solution for you my friend:
    1) Open Finder,
    2) On the top right search box enter .itl
    3) Move to trash all the .itl Files you see then restart your iTunes, and your iTunes is back to you.
    Hope this works buddy.

  • Problems when selecting an image from a scanned document... please help

    I scan student work and I want to make comments. I want to copy a portion of the student work from the scanned PDF. I use preview and select a portion of the PDF. When I paste the selection into pages the entire PDF is put into pages. If I paste into text edit, I only get the selection. This problem does not occur in Pages 09 but I can't afford it. Any suggestions?

    r,
    Try this workflow:
    Open the PDF in Preview and use the Selection Tool in Preview to highlight the portion that you want to excerpt.
    Edit > Copy.
    File > New from Clipboard.
    Save.
    Drag new file into Pages.
    Using this method you will not lose any resolution as you may when you do a screen capture.
    Jerry

  • Problem when select "software update"

    Hi guys,
    I upgraded my Tiger Server to Leopard Server last 2 weeks, but there is a problem that everytime when i select 'Software Update' in apple then it tells me this:
    "software update can't connect to the update server. Make sure you're connected to the internet, then try again.
    Software update can't check for the updates because of a network problem"
    My Leopard server connect to internet just fine. But I don't know why it keeps saying that message every time. any idea ? Thanks

    sign in and out of app store
    shut down iphone
    reset iphone
    reset network setting

  • Problem when selecting child node in Hierarchical Tree

    I have a hierarchical tree on a form populated thru a table query(form1). When I click on a child node, it opens form2 which contains a tab canvas. After closing forms, I return to the form1(containing Tree). At this point If I want to click on the same child node, I should be able to open form2 again. This doesn't happen.
    I have the following code in my When-Tree-node_selected trigger:
    Declare
    htree item;
    vnode_label varchar2(50);
    node_clicked FTREE.NODE;
    vnode_value number;
    vnode_depth number;
    v_type number;
    v_value varchar2(100);
    v_form_name varchar2(100);
    v_alert_return number;
    begin
    -- Find the tree itself.
    htree := FIND_ITEM('tree_block.tree');
    node_clicked := :SYSTEM.TRIGGER_NODE;
    vnode_value := FTREE.NODE_label;
    -- Find the value of the node clicked on.
    vnode_label := FTREE.GET_TREE_NODE_PROPERTY (htree,:SYSTEM.TRIGGER_NODE,FTREE.NODE_label);
    vnode_depth := to_number(ftree.get_tree_node_property(htree,:SYSTEM.TRIGGER_NODE,ftree.Node_depth));
    --Open form for node selected on tree and/or specific tab page
    if vnode_depth <> 1 then
    if :system.trigger_node_selected = 'TRUE' then CASE vnode_label
    WHEN 'Personal' then
    v_form_name :='HR_PERSONAL_INFO_UPDATE';
    WHEN 'Citizenship' then
    v_form_name :='HR_PERSONAL_INFO_UPDATE';
    WHEN 'Emergency Contact' then
    v_form_name :='HR_PERSONAL_INFO_UPDATE';
    if id_null(Find_form(v_form_name)) then
    open_form(:global.application_path || v_form_name,ACTIVATE,NO_SESSION,SHARE_LIBRARY_DATA);
    else
    go_form(v_form_name);
    end if;
    END IF;
    elsif vnode_depth = 1 then
    if :system.trigger_node_SELECTED = 'TRUE' then CASE vnode_label
    WHEN 'EMPLOYEE INFO' then
    v_form_name :='HR_PERSONAL_INFO_UPDATE';
    vnode_label := 'Personal';
    WHEN 'REPORTS' then
    v_form_name :='HR_REPORTS';
    vnode_label := '';
    if id_null(Find_form(v_form_name)) then
    v_form_name := :global.application_path || v_form_name;
    open_form(v_form_name,ACTIVATE,NO_SESSION,SHARE_LIBRARY_DATA);--,p_list);
    else
    go_form(v_form_name);
    end if;
    end if;
    end;
    Can anyone please help me? I don't want the user to double click. They should only click once.
    Thanks,
    Mercedes

    Right clicking does not change the current selection. The tree has no way to report what node was right clicked. Only work around is to left click the node you wish then right click it.
    --pat                                                                                                                                                                                                                                                                                                                                                                                                       

  • Problem when Selecting keyframes with marquee tool

    I'm working through Lesson 7 of Mark Spencer's Motion 4 book and in section "Working with multiple keyframe curves." In step 7, he says to "drag a marquee to select all middle Scale keyframes to reveal their Bezier handles." I do this and then change the keyframe curve by moving the Bezier handle. But it only affects the Transform.Scale.X parameter, not Y and Z. But all three parameters are indeed selected. What is going on?
    Message was edited by: chip grabow

    Cleared this up myself: When I would try to adjust a bezier handle, I was holding down the shift key to constrain the handle's horizontal movement. That resulted, for some reason, in only selecting one parameter, the Scale.X point. When I stopped holding down Shift, the adjustment worked as advertised.

  • HT201362 hi, please guide me how to use the down load function! I really facing problem when selected software but can't smoothly up load?

    Hi, we're any expert can teach me the best solution or software can easily down whatever good lecture or good movie can easily control and. Down loading. Very much thankful to you

    >> then I get a completely blue screen.
    That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
    And sure enough, your video card driver is almost 2 years out of date.
    Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

  • Problem when selecting PublishingRollupImage using REST API using Javascript ?

    Hii Guys,
    I am developing  a listing page of News using REST, the custom list contains Title, PublishingRollupImage, and other fields which is provided in the $select
    http://xyz/_api/web/lists/getbytitle('News')/Items?$select=Title,Link,PublishingRollupImage
    the column "PublishingRollupImage" is there and i can return the result by using normal JavaScript API with CAML query.
    but REST calling while specifying this column is failing with this error
    The field or property 'PublishingRollupImage' does not exist
    Microsoft.SharePoint.Client.InvalidClientQueryException
    please note that this is not the (hyperlink/image) field,
    its an existing site columns (publishing image)

    Hi,
    According to your post, my understanding is that you want to get Rollup Image data using REST API.
    Per my knowledge, we can’t get it using REST API.
    We can use Client Object Model to achieve it, the following code snippet for your reference:
    var ctx = new SP.ClientContext();
    var items = ctx.get_web().get_lists().getByTitle('Pages').getItems(new SP.CamlQuery());
    ctx.load(items);
    ctx.executeQueryAsync(function() {
    // Get the first items rollup image, just as an example
    var rollupImage = items.getItemAtIndex(0).get_item('PublishingRollupImage');
    console.log(rollupImage);
    If you still want to use the REST API, we can customize a We Service to achieve it.
    http://sharepointlearningcurve.blogspot.in/2013/08/creating-wcf-rest-service-for.html
    Here is a similar thread for you to take a look:
    http://sharepoint.stackexchange.com/questions/46844/how-to-get-publishingrollupimage-for-page-in-page-library-with-rest-and-jquery
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Problems when selecting from temp table

    I have a php script wich creates a temporary table with this command:
    "create global temporary table temp_ouput(...)"
    All is ok.
    Then I insert a lot of data and it doesn't complain.
    Then I attempt to select all records but I end up with an empty set. I mean, it doesn't return any records.
    What's wrong here?

    Are you using the ON COMMIT PRESERVE ROWS option? If not, your data will be deleted as soon as you commit after your insert.
    If you do use this option, you need to clear the table yourself if you are re-using the temp table within your session.

  • Motion 5 Hangs (beach ball) when selecting a movie file in File Browser

    Using the file browser in Motion 5, select a movie file (any type of movie file) Motion hangs. Even occurs when trying to select a folder that contains any movie files. After selecting a movie in about 30 seconds the clip details will appear at the top of the file browser, but the video is never displayed in the small preview window. No problems when selecting any pictures or audio files. Also, can drag any of these same movie clips with the Finder into Motion and they play with no issue. Any ideas?

    Primarily have HD footage that uses the H.264 codec and SD footage that is DV NTSC. Also, have clips I have created with After Effects and rendered out as mov files using the Animation Codec, all have the same problem.
    Further, did not have this issue until after migrating to Lion, all was good with Snow Leopard. But, I can't say that the problem started immediately after the migration. Did not use Motion 5 until about 2 days after I did the migration.
    This is on a Macbook Pro 17in, early 2011, 8GB memory, AMD Radeon HD6750M

  • When selecting with the lassoo tool, area closes suddenly before finishing

    Hello, I have a big problem: when selecting a silohuete with the poligonal lassoo tool, the area suddenly closes without clicking, selecting an area which I do not desire and making impossible to select the silohuete I want. Please can you tell me why this happens and how to avoid it??
    Thank you so much!!!!!!!!!!!!

    To close a polygonal lasso selection you need to either double-click or ctrl+click. http://forums.adobe.com/thread/416380
    workaround: http://forums.adobe.com/message/1958912#1958912

  • I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

    I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download.  There is not enough available local storage to download these items.  You can manage your local device storage usage in Settings."
    How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone?  Why is it telling me there is not enough local space?

    Hi RileyAvaCadenRiver,
    If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
    Apple: iTunes 11.1.1
    http://support.apple.com/kb/DL1614
    Regards,
    - Brenden

  • I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following -  I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

    Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
    I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
    I am receiving an error problem when doing the following -
    I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
    When processing the Export I receive an error message for each of the images being exported indicating the following -
    Heading Import Results
    Some import operations were not performed
    Could not move a file to requested location. (1)
    then a description of the image with file name
    Box Save As                                  Box  OK
    If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
    To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
    Thanks if you can can help out.

    Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

  • I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list.  I have t

    I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list.  I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.

    After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

Maybe you are looking for

  • Video Card Drivers AMD Radeon HD 6770M

    I went to AMD website to get the dirvers for my new laptop's video card. They weren't compatible and sent me here to download your drivers. I installed them worked perfectly, but then after 2 minutes of playing a game (Minecraft) it froze, and went i

  • How do I Consolidate my photos scattered on my c drive and my H drive?

    All of my photos have been imported already but some are on my C drive and others are on my H drive. All of those on my H drive are all under a single folder My Lightroom photographs. Those on my C drive are under a whole set of about 50 folders. I h

  • Spry accordian problems in IE

    I have created a website that uses the Spry accordian effect that has been modified to be used for sections for the site. I have tested it on all browsers however found out that the spry accordian doesn't work in Internet explorer. I have noticed the

  • Bet you haven't seen/HEARD (literally) this problem with the iPhone 4. Vid

    what the **** is this?? I took this and threw it on youtube today. anyone having the same problem? http://www.youtube.com/watch?v=1AOzu78uLMU

  • Consignment fill-up process, the delivery # displays in VF04 t.code

    Hi All, We have one partner and when we run the VF04 t code we are getting delivery numbers (consignment fill-up  delivery) but we are not able to create the billing doc for that. my question is how we can prevent the fill-up delivery number should n