Link ambiguity while playing back

Oats version 12.4.0
I have two links in my page with same name,
I recorded script fine.
While playing back it is clicking same link again and again
Thanks
venkat

Hi,
Remove all unwanted attributes from XPath , say href etc. Then replace or with and in XPath. Give text attribute and index attribute in XPath. This will solve your issue for sure.
If you face any difficulties in doing this, paste code of both links here, so I can help you to modify

Similar Messages

  • While playing back a video file the sound goes sort of like an echo and stopping the video and playing back again it sound great, the video is recorded live with an AJA system and plays fine on the units;any clue to what is going

    While playing back a video recorded on a AJA system we transfered it to the macbook pro played it with quicktime works great and sometimes it sounds like an echo same file track and it plays fine on the aja system.Tried it on another macbook pro and it did the same issue.Any clue to what is going on.Thank you.

    Thank you supermacmom!
    I have the LifeProof case for the iPhone5, and I remember the instructions saying that any protective screen cover should be removed before enclosing the phone into the case, but I left mine on with no ill effects.
    But I should have taken off the back protective film, which was covering the video mic!

  • Export QuickTimes freeze and skip while playing back

    I’m new to Motion, and growing concerned. I’ve purchased and learned Motion for a specific job. I’ve built some very cool elements with many layers. I’ve grown accustom to the slow performance, skipping etc. while working on the project. That’s ok.
    What concerns me is exporting. When exporting Draft or Best versions, most all the time the movies freeze or skip while playing back, either in QuickTime or Final Cut Pro
    When exporting I select Export, as QuickTime Movie, using current project settings
    I’m using Motion 3.02-HDV 1080-60i project, 10 seconds long
    4x 2.5 Ghz G5
    5 GB Ram
    I would appreciate and advice or tricks to be able to export a decent version of what I’ve built.
    Thanks!

    Andy, thanks for your help.
    I have 30 gigs available on the hardrive. The file exports are usually less than a gig. I have a GeForce 6600 card.
    When I select export setting from “current project settings” it uses the Animation codec and plays with freezes and skips. But with in that video that does play well, it plays very clean and clear.
    When I change the export to 1080i60 at best quality, I’m guessing it uses the HDV codec? It does play back with out the skips and freezes. But it looks like **** with horizontal lines in titles stripes etc.
    Is there a way to make the 1080i60 video playback clean?
    Thanks!

  • Live video capture while playing back another video track?

    Is it possible to capture live video while another video track is being played back? I would like to do this for multitrack video recording of music: a) record a video track, then b) record a second video track while listening to/watching the first. Exactly like multitrack recording of audio as in Garage Band, but with video.
    A similar question was asked here, but I want to avoid manual synchronization. http://discussions.apple.com/thread.jspa?messageID=11712024&#11712024
    As an example, there are lots of multitrack videos on youtube, but you can often tell synchronization has been done manually as the audio and video are out of sync (even if only slightly):
    http://www.youtube.com/watch?v=a2RA0vsZXf8&feature=related
    Many thanks!

    I'm not too familiar with video editing (yet), so please forgive me if I've misunderstood your suggestions. I think what I'm talking about would have to be done post (after shooting multiple video tracks?), and couldn't be done with video switching (live switching between multiple video feeds?). Here's a much better example of what I'm trying to do: http://www.youtube.com/watch?v=PGKErn2Zr88
    What it boils down to in my mind is precise synchronization of a new capture with something pre-recorded (be it audio or video). If no software can do this (yet), perhaps there's a way to do it with additional hardware, for example playing video on a monitor while simultaneously recording with a camera, assuming the devices can be synchronized somehow?
    Thanks!

  • Inputs won't playthrough while playing back

    Recently I had to trash my prefs for Logic Pro 9 which worked perfectly. I could play along with a track and had no issues. After the trashing of the prefs I can no longer hear what I'm playing while I play down the timeline (A/D is a Mackie Onyx 820i). If I record I can hear it play back while I playing, but if I just play back the timeline and play along I can't hear the, in this case electric guitar. I rechecked my Mackie settings and they haven't changed and I reset the prefs in logic:
    I have tried it with 'Independant Monitoring Level' both checked and unchecked which made no difference. I know it's probably something I didn't check but for the life of me I can't remember what it was.
    Thanks!

    Figured it out. Thanks anyway.

  • Premiere CC eating up memory while playing back ProRes 4444

    We are editing footage shot on the Amira on two Mac Pros with Premiere Pro CC 2014.
    One of the Macs plays back the native footage fine at half resolution. Looking at the activity monitor, the whole system is using about 12GB of RAM and stays there.
    However, the other Mac seems to be gobbling up RAM very fast during playback until it hits the ceiling and everything starts to slow down and seize up. It will only release the RAM after quitting the program or forcing OS X to purge it.
    I’ve posted the specs for each Mac below.
    A few other things to note:
    - The media format is ProRes 4444 and size is 2048 x 1152
    - Disabling LUTs does not seem to fix the problem
    - Replacing the ProRes 4444 footage with ProRes Proxy fixes the problem, but with 120 hours of footage, this not an ideal solution as we are in the middle of an edit
    - The bad Mac is showing an error in the Activity Monitor (Adobe QT32 server not responding)
    - Removing plugins from Library/Quicktime does not fix the problem
    Any help or thoughts would be much appreciated!
    Thanks,
    Paul

    Hey Sam... just wondering if you ever figured this problem out.  I have the exact same problem, albeit with FCPX XML's.  It's driving me bonkers and nobody seems to know.  Any insight would be truly appreciated.  Thanks.

  • How to get audio output of my instrument while playing back the other tracks?

    I do not hear any audio signal from my bass guitar while playing along the other tracks in Logic. I can only hear the audio output of my bass while I record or stop the music. How can I change the settings so that I can play along and hear myself while I practice? The track for bass is not muted and is getting a strong input signal.

    Hi
    Enable the Input Monitoring button (the I next to the R)?
    CCT

  • Importing issues with Final Cut Pro X. Green flash and twitches while play back

    Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
    Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
    Here is a screenshot of the green screen that I'm talking about:
    [URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
    Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
    In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
    More information:
    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

  • Using iPod Touch remotely while playing back through home stereo.

    Hey, I'm not sure if this is possible but I'm interested in knowing if there is a set of accessories I can buy that will allow me to do this:
    I want to play music through my home stereo. I want to use the iPod Touch to select which music is played, and I don't want to have to have the Touch plugged into anything.
    The music doesn't necessarily need to be played from the Touch, it can be played from my computer instead, the Touch would just need to be able to control and browse my iTunes in this case. Or alternatively the Touch could stream music to some sort of station connected to the stereo.
    Is this possible right now or do I need to wait for a new product to allow me to do this.
    Lets say price is no concern right now, is there anything out there that would allow me to do this?
    Thanks

    there is a web application currently that would allow the touch to remotly control ur itunes on ur computer i have not tried it....but it seems like it would be what u are interest in.....
    Here is the link to one..
    http://www.apple.com/webapps/productivity/roami.html
    Here is the link to another one...
    http://www.apple.com/webapps/entertainment/signal.html
    Hope these help

  • Pixelated images while playing back a video shot on my iPhone4s

    Shot a video of my kid playing soccer and when watching on playback mode on either iphoto or imovie it comes out all pixelated images...

    The size of the hard drive that the OS resides upon is not of concern as long as it has enough space for you operating system, the applications and a swap file.
    The reason you NEED to keep you media files on a second drive is that it is TOO MUCH to ask of one drive to deal with all the system level read/writes AND to also seek, find and play all your audio AND video AND renders AND graphics and who knows what else you've got going.
    to get the best possible playback.
    1. Run Diskwarrior and Disk Utilities to make sure the files/directories are clean.
    2 Disconect the system from any network.
    3. Turn off any screen, power, disk power savers
    4.Make the file self-contained
    5. Have ONLY the external drive that the media resides upon connected through the firewire bus.
    6.Shut down and reboot the machine before you start.
    7. Pray.
    Cheers,
    x

  • Exception while playing back

    Does any body know the reason of following exception. frequency of this exception is very high while running test cases. Please help this is very urgent.
    20:29:40,468 ERROR [EnumSrvc] Failed to get children by tag:window
    oracle.oats.scripting.modules.webdom.common.api.exception.WaitForPageTimeoutException: Timeout(20 seconds) occurred waiting for page to load.
         at oracle.oats.scripting.modules.webdom.common.api.exception.WaitForPageTimeoutException.createWaitForPageTimeoutException(WaitForPageTimeoutException.java:34)
         at oracle.oats.scripting.modules.webdom.common.api.internal.communication.MessageHandler.sendMessage(MessageHandler.java:82)
         at oracle.oats.scripting.modules.webdom.api.internal.InternalWebDOMService.sendMessage(InternalWebDOMService.java:287)
         at oracle.oats.scripting.modules.webdom.api.internal.service.EnumSrvc.getChildrenByTag(EnumSrvc.java:187)
         at oracle.oats.scripting.modules.webdom.api.internal.service.EnumSrvc.getChild(EnumSrvc.java:128)
         at oracle.oats.scripting.modules.webdom.api.internal.service.EnumSrvc.getChildren(EnumSrvc.java:264)
         at oracle.oats.scripting.modules.webdom.api.internal.service.EnumSrvc.getChildren(EnumSrvc.java:1)
         at oracle.oats.scripting.modules.functionalTest.api.internal.services.FindTestObjectSrvc.findTestObject(FindTestObjectSrvc.java:131)
         at oracle.oats.scripting.modules.functionalTest.api.internal.services.FindTestObjectSrvc.findTestObject(FindTestObjectSrvc.java:75)
         at oracle.oats.scripting.modules.functionalTest.api.internal.services.FuncTestSrvc.findTestObject(FuncTestSrvc.java:72)
         at oracle.oats.scripting.modules.functionalTest.api.internal.services.FuncTestSrvc.findTestObject(FuncTestSrvc.java:66)
         at oracle.oats.scripting.modules.webdom.api.internal.InternalWebDOMService.findDomElement(InternalWebDOMService.java:858)
         at oracle.oats.scripting.modules.webdom.api.internal.InternalWebDOMService.findDomElement(InternalWebDOMService.java:841)
         at oracle.oats.scripting.modules.webdom.api.elements.DOMTestObject.exists(DOMTestObject.java:272)
         at oracle.oats.scripting.modules.webdom.api.elements.DOMTestObject.exists(DOMTestObject.java:319)
         at org.oracle.automation.amclasses.webobjects.webunits.WebFieldUnitVisibility.IsVisible(WebFieldUnitVisibility.java:178)
    Thanks,
    Manish

    1. Out of four components in OATS Only Openscript 12.2.0.1 component is installed on our test PC.
    2. We are using web module for functional testing.
    3. This exception normally occurs when we check for the Existence of an object i.e. when we use exists method.
    4. I have also tried with larger "Object Timeout" value under the Web functional preferences, but no success.
    5. Also, We take a screenshot whenever there is an exception while executing scripts. In these screenshot i can clearly see application page is loaded.
    Just want to know what is the reason for this exception?
    Thanks for the quick response.
    Regards,
    Manish

  • Adding markers and info while playing

    I recall seeing a marketing bullet about how you could now add markers and info during playback on FCP6.
    I can't figure out how this actually works, if it does.
    Is there a way to drop a marker while playing back AND add info into the dialog box that normally pops up if you hit the tilda twice?
    Can't find ANY info about this.

    That is a feature of FCP 7...not 6.
    -shane

  • Premiere CC crash while playing and zooming timeline

    Regularly crashing Premiere CC now while playing back the timeline, I zoom in and out on the timeline using my +/- hot keys and Premiere CC will crash.  I hate to say it but Premiere is starting to become unstable like my prior copy of Sony Vegas Pro.  It's frustrating.

    It's a generic error so unfortunately, it doesn't say much.
    "Adobe Premiere Pro CC has stopped working
    A problem caused the program to stop working correctly.
    Windows will close the program and notify you if a solution is available."
    I click 'Close program' and Premiere CC goes away. For my setup, ti's pretty easy to replicate:
    1. Open sequence. Starting playing.
    2. While it's playing, click somewhere on the timeline and start zooming in/out with +/- keys.  The crash will occur shortly afterwards.

  • AudioServicesPlayAlertSound vibrates while playing audio

    Hello All,
    I have a small problem with the AudioServicesPlayAlertSound. When I play the audio, the iPhone also vibrating in addition to playing it. What I do is, I call the AudioServicesPlayAlertSound and than do some view animations.
    Here the code snippets I using for playing the audio:
    -(AudioTools*)init {
    self = [super init];
    CFBundleRef mainBundle;
    mainBundle = CFBundleGetMainBundle ();
    soundFileDoneURLRef = CFBundleCopyResourceURL (mainBundle,CFSTR ("Kids Cheering"),CFSTR ("aif"),NULL);
    AudioServicesCreateSystemSoundID (soundFileDoneURLRef,&soundFileDoneObject);
    return self;
    - (void) playDoneSound {
    AudioServicesPlayAlertSound (self.soundFileDoneObject);
    any help with this is very much appreciated - since I don't want to have the annoying vibrating while playing back.
    thanks
    -Uwe

    Well, I should have read the documentation more careful. The vibrating is a 'feature' of the AudioServicesPlayAlertSound if the iPhone is setup to vibrate while playing alerts.
    I'm using now AudioServicePlaySystemSound instead and it works great.

  • How do you get money credited back when your child mistakenly buys an app while playing a free kids game?

    How do you get money credited back when your child mistakenly buys an app while playing a free kids game?  We need to refund the charges and apps that were mistakenly purchased by a child while playing a free kids game on Ipad.

    There are no refunds, but you can try contacting itunes support and asking for an exception.
    Click "Support" at the top of this page, then click the link under "Contact Us".

Maybe you are looking for