Link between documents and update the version

Hi
I have linked documents between different sites in Sharepoint. When I change the contain in the main documents and the Version is change from 1.0 to Version 2.0. Now the version for the linked document is still Version 1.0 in the document
list. How can I manage that the linked document shows the same Version number as the main document when it is updated?

Hi
I copy the shortcut to the main document and add New document (link to a document) in a different folder than main documents.
It is the documents version number as you can see in the Version history. Hope that is answer to your question.

Similar Messages

I cannot download and update the version 5.1? it says "the network connection could not be established"

what will i do? i dont have prob with my net connection.

This has solved loads of people who have this issue and have used an alternate DNS setting. Below are instructions for both iPhone OTA and on you Mac
If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
You can use OpenDNS
208.67.222.222
208.67.220.220
or
You can Google Public DNS if you want
8.8.8.8
8.8.4.4

Link between oracle and java

Please, can you explain me the link between oracle and java.

The link b/w oracle and java is through
driver.
Driver name :JDBC

In jdbc adapter what is the difference between insert and update insert

in jdbc adapter what is the difference between insert and update insert
Edited by: katru vijay on Mar 22, 2010 7:43 AM

Please refer to this Link [Document Formats for the Receiver JDBC Adapter|http://help.sap.com/saphelp_nw04/Helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm]
Hope this helps.
Regards,
Chandravadan

[SOLVED] What's the link between AUR and ABS?

Hi!
I'm still a bit new to Arch and recently I added google-talkplugin using AUR (https://aur.archlinux.org/packages/google-talkplugin/).
But apparently there is a link between AUR and ABS that I don't get already...
Most of all, will google-talkplugin be updated automatically when I do a "pacman -Syu" or I'll have to check for new version frequently and recompile everything each time?
I think maybe ABS is the solution to this problem...?
Thanks!
Last edited by Creak (2013-10-27 12:56:00)

Creak wrote:About the AUR helpers, there is quite a long list of search/build helpers.. Is there better ones? I've just seen yaourt in a screenshot once...
This is highly subjective and depends on what you need and what your current experience level is. You will often see yaourt discouraged for new users - it just automates too much, so when something goes wrong, users who haven't used less-hand-holding tools have no idea how to proceed. I use cower, which has a simple command to check which AUR packages you have installed are outdated - but then it is up to you do update them yourself. I'd suggest something like the latter approach.

Broken Link between Base and Target document in 'Copy To' option

Hi Folks,
One of our client has been facing a peculiar issue. When the 'Copy To' function is used to Copy document from Sales Order to Delivery and recently one instance of 'Copy To' from Delivery to A/R Invoice ,the base document got copied to the target document in each case but there was no trace of any Base Ref. left in the Target document( either in row level or Remarks), thereby the link between the Base and Target document got broken.The Base document remains with status as open.The same base document when tried again to 'Copy To', it creates the link between Base and new Target document.
This instance had occurred recently 3- 4 times in a span of 3 months or so. In normal circumstance this never happens. The client is pretty sure they have used 'Copy To' option to copy the document from Base to Target.
Any hints or possible reasons if one can highlight would be appreciable.
The current version used is SAP B1 8.82 PL11 and it was upgraded more than a year back.
Regards,
Bharath

Hi,
All the data in Sales Order and Delivery are matching one to one in terms of row details,
and Document header level.
The missing data was Base Ref. data and Del.Date didn't get copied from base to target as shown in screen shot.
Also i have checked it earlier regarding change of target document row details like changing item, but this will only remove the link of that particular row and remaining row link remains intact, but in this case there are many items and it doesn't seem user will have changed in all the rows.
Regards,
Bharath

I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please

I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.

This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene

Link between 313 and 315 documents

I am using two step transfer for stor. loc to stor loc transfer by 313 (Transfer posting - Others) to move stock from Supplying stor loc to In transfer. And then, with respect to document no. of 313, place in storage by movement type 315.
But there is no link between document nos. of 313 and 315. So it's not possbile to get report of the same.
Kindly resolve this issue asap.

Hi,
There is no std. link or any configuration, you can look for round the solution with your ABAPer.
Kapil

How to customize the link between archivelink and Alfresco

hi,
We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
my question is how to make the bridge between sap archivelink and Alfresco for this display ?
how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
we are working in 4.7.

Hi,
Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
Once that is in place you can configure a repository in OAC0.
At the link below you find a link to a PDF
http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
Furthermore CTAC seems to have done development to connect SAP and Alfresco.
Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
Kind Regards
Edmond

How to break the link between photoshop and lightroom when saving a photo?

I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
I'm missing something here.
There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
Thanks,

I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
If my guess is correct, then you just need to set the default profile to be something other than your computer.
If I am wrong, a screenshot of the error would be really helpful.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

What is the diff in term of fastness and performance between retina and last mbp version in percentage ?

What is the diff in term of fastness and performance between retina and last mbp version in PERCENTAGE ?
Ty to not give links i want an answer here and now by someone who knows what hes talking about.

But old mbp is not available with ssd you have to buy the option right ?
Anyway, outside reboot speed is there a speed difference between retina and old version in term of general processing ?
I have a 2009 MBP that originally came with a SATA drive. Recently, I swapped drives; now, it has 512GB SSD. In other words, you can easily increase the speed of a standard MBP. There is going to be an increase in general processing with the Retina MBPs, but the significance depends on the application. For example, booting Photoshop used to take just over 30 seconds with a SATA drive; with an SSD, it's just under 10 seconds. But controlling for the SATA vs SSD, the differences are smaller and incremental.
Ok you speak about a diff with the retina in term of better graphics when zooming but will this advantage be relevant also on my external giant monitors ?
I can't answer that, so I'll leave that to someone with more expertise in this area.

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

Hi!
I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
Thank you in advance!
Best Regards,
Carlos.

Hi,
Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
* I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
* Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
I can download with the same user in the PC, in the iPhone... but not in the iPad .
I'm getting mad...

What is the link between PO and Requisition in database side

hello friends,
please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
want to know that what is the link between both in database side.
Thanks in advance
krish.

Hi,
The link is at distribution level, between:
PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
and
PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
Hope it helps.

I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

You cannot return to previous state. The update re-locked the iPhone
to the original carrier. You must contact the original carrier to see if
they offer unlocking and if you qualify.
What does it say when you look at Settings=>General=>Carrier?
Be advised that if your iPhone had previously been hacked/modified/
jailbroken to work with other than original carrier, it may be impossible
for the original carrier to unlock it properly.

Link between documents and update the version

Similar Messages

Maybe you are looking for