Link DMS Document to Report

Hello I created a PDF documentation for a report and
want to link it with a SAP report (called by transaction SA38)
I created a DMS document by transaction CV01N
created document links to report, transaction and
developement object R3TR/PROG/<report name>
and also transaction R3TR/TRAN/<transaction>
I released the document (status).
But I do not know how to make this documentation
available from selection screen of report.
Can anybody help me with this task?
Thank you
Matthias
[other Keywords: CV02N CV03N]

Hi Matthias
Whenever you create a DIR  for Example with parameters
Docuemnt Number   - 100005
Document Type - DRW
Part - 000
Version - 00
You can Link this DIR with Standard SAP Object such as Material Master ( MARA ) , Vendor Master ( LFA1 ) , Customer ( KNA1)  in DC10 ( Define Document Types > Define Object Links ).
In this Standard SAP Object are available that can be linked to Document Type. If the Object you desire to link to SAP DMS DIR is not available the you will have to do ABAP Developement to link your desired object to DIR in SAP DMS.
Check this Link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
Check your Object which you want to link to SAP DMS. if not the Follow the procedure given in link.
Hope this information is usefull to you.
With Regards
Mangesh Pande

Similar Messages

  • Error while linking dms document with cProject.

    Hi,
       I am encountering an error while try to link the document in cProject under SAP DMS tab. The error message is
    Link Not Possible: The SAP R/3 DMS document info record contains orig (Message number 26 000).
    Pls help me out to solve the this issue.
    Thanking you.
    Regards,
    N.Ramesh

    Hi,
    There is no link between SAP R/3 and SAP DMS server.
    Please be create for RFC's through SM59 tcode.
    Regards,
    Srini Nookala

  • Error while linking DMS document in cProject

    Hi,
         When I link the document of DMS in cProject an error  message
    `` Link Not Possible: The SAP R/3 DMS document info record contains orig( Message number 26 000)``
    is appearing. I could search the list of documents . I am facing this issue only selecting and clicking the continue button under SAP DMS tab in cProject. RFC is doing well. Pls help me to solve the issue.
    Regards,
    Ramesh

    Hi,
    Please check after using following steps.
    Goto - SPRO -
    > Collaboration Projects---->Structure---> Define Project Type
    Please select the your project type and check SAP DMS is selected under tab Active Function.
    Regards

  • Link DMS document to Sales Order

    Hello -
    Currenlty, our Quality Department manually opens each applicable sales order and manually attaches a required document via the "Extras/Documents" path from within VA02 menu bar. It is extremely time consuming.
    I want to know if it is possible to automatically attach a "linked document" to a sales order after it has been saved? I'd like to create/run a batch job that loops through these sales orders, and if applicable, attaches the "linked document". DMS is setup and working and the document that I need to attach is ready. I don't know where I need to put the record of this "link". I can see all of the "links" via CV03N (Object Links/Sales Document Item), but I don't know how they get there.
    Any advice or link to documentation would be greatly appreciated.
    Thanks,
    Bryan

    Benakaraj ES -
    A few more questions with BAPI_DOCUMENT_CREATE2.
    Here is the FM. Can you assist in helping me establish which parameters I need to provide?
    Example:
    Sales Order: 2142342 with one line item.
    Document:
    TYPE: ZQN (DRAW-DOKAR)
    DOC: QZ6 (DRAW-DOKNR)
    PART: 000 (DRAW-DOKTL)
    VER: 00 (DRAW-DOKVR)                                     
    CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
    EXPORTING
        documentdata                           = ls_doc
        HOSTNAME                             =
        DOCBOMCHANGENUMBER     =
        DOCBOMVALIDFROM              =
        DOCBOMREVISIONLEVEL       =
        CAD_MODE                             = ' '
        PF_FTP_DEST                         = ' '
        PF_HTTP_DEST                       = ' '
    IMPORTING
        documenttype                 = lf_doctype
        documentnumber             = lf_docnumber
        documentpart                  = lf_docpart
        documentversion             = lf_docversion
        return                             = ls_return
    TABLES
        CHARACTERISTICVALUES      =
        CLASSALLOCATIONS              =
        DOCUMENTDESCRIPTIONS     =
        OBJECTLINKS                         = lt_drad
        DOCUMENTSTRUCTURE         =
        DOCUMENTFILES                   =
        LONGTEXTS                           =
        COMPONENTS                       =
    I see that there is an objectlinks table which I assume is used to create the link between the document and VA02/VA03. The underlying structure for the objectlinks table is BAPI_DOC_DRAD. I'm not clear on what values I need to add to this table when calling the BAPI_DOCUMENT_CREATE2. FM.??
    Any advice on how to fill stucture BAPI_DOC_DRAD?
    Also, I don't want to create any documents. The document already exists. I just want to establish a link. Can I do that without creating a document that already exists?
    Thanks,
    Bryan

  • Linking word document to report and refreshing

    I'm looking to link word documents to a report. After changing the word documents I'm looking for a way to automatically refresh WITHOUT opening the report again.
    I know this can be done if the report is opened after changing the word documents but I'm trying to find a way to do it without re-opening.
    Is there a way?
    Slim

    Hi Slim,
    If you are not refreshing your report, it will show only static information which is saved in your previous refresh.  It is not possible to view changes without refreshing the report.
    Thanks,
    Sastry

  • How to link PDF document in Report Layout??

    I need to display the contents of PDF document after the form letter report. I tried OLE object but at the runtime it does not display the content. Does any one knows how to attach PDF document in reports layout?
    Thanks
    Ravindra

    you will have to concatinate your report output with the static PDF document. in reprots 10g you can create a cusotm destination that could implement this functionality.
    out of the box, reports does not provide the ability to add static content in PDF to reports' generated PDF output.
    thanks,
    philipp

  • Link DMS document to LISP and PLPO object types?

    Hi,
    I am trying to link the  Objects LISP & PLPO  to the DMS.
    In the process of this I followed the note - 321531
    I did the following steps.
    1.Copy screen 1204 in function group CV130 to the screen number 9003  to the program SAPLCV130 and did the rest of the steps as per the note.
    2. Copy screen 1204 in function group CV100 to the screen number 9003 to the program SAPLCV100 and did the rest of the steps as per the note.
    3. In DC10 Define Document types - I created new entry with object LISP and screen no 9003.
    4. And created a document no and attached VBELN and POSNR values to document no.
    5.  I did config part in the SPRO Maintain Key fields and added these objects details .
    6. Now when I go and check in VL03N transaction entering VBELN no which is existed in the document no
    I supposed to find the tab or menu path for the Document Folder?
    But I am not able to find any tab or menu path that related to documents.
    Can anyone let me know if I am missing anything ? And also where exactly or what kind of tab or menu item it will add in the transaction VLO3N?
    Thanks for your time.
    Rajesh

    Hi Rajesh ,
          I am facing exactly the same problem, please tell me if you get the solution.
    Thanks in advance
    Abhilash

  • Link DMS document to a finance object

    Hello,
    As anybody succeeded to create a document link to finance object?
    I am now trying to create this link, and I as already read SAP Help about this topic. As far as I understand I need to:
    "1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    – SAPLCV00
    – SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.Create the function module DOCUMENT_CHECK_XXXX (XXXX = name of the SAP object). If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module DOCUMENT_CHECK_EQUI (linking of equipments) and change it to suit the new object."
    First of all, in SAP IMG help, the programs mentioned are SAPLCV130 and SAPLCV140, screen 1204, instead of those above…
    So, I am now very confused and do not know what to do in order to create the necessary link…
    As anybody have some sample code?
    Can anybody help me about this problem? This problem as now become very critical for the continuity of my Project...
    Thanks in advance,
    Margarida

    Hello:
    This is what I have done to make it work in ECC6.0 using EKKO.
    In SE80, enter in Function Group CV130. Then expand the screen folder and look at the screen logic of several screens. I noticed that they're all the same except for the "field" statement, which is particular to the specific table. I copied 1208, but you can copy whichever one you want. You will need to register the object (if not already) and usually basis can help with that. I created a screen 9001. (Note: This can be overwritten with a new SAP release so be weary of that).
    I replaced the codes using the Modification assistant in the screen Flow Logic
          FIELD mcdokob-einri.
          FIELD mcdokob-falnr.
    and put in
          FIELD ekko-ebeln. I also had to remove the MCDOKOB variables from the screen Element List and replace it with EKKO-EBELN.
    Then in config (following the standard help guidelines) I added the object link with my new screen. I see it. I hope any of you do as well.

  • DMS Document Type - Repository

    Hi Experts,
    Need a help.
    Is this possible to link DMS document type (created with help of DC20) with dedicated content repository (OAC0)?
    Regards
    Adam

    Hi Adam,
    If you do not select the "KPRO" indicator then your original files will get uploaded on SAP database with different storage category.
    You can have different category for different document type...provided while uploading the document/file from CV01N/CV02N you should select the correct category from the pop up.
    Thanks
    Pravin

  • DMS document output in SOP report

    Hi all,
    I want to OUTPUT a DMS document in SOP Report template. But it is not reflecting in my SOP report  though I have fullfilled the prerequisites.Here are my steps that i carried out
    1)  I have linked the DMS doc. in a value assignment in user defined text.
    2) The DMS document type is SBV.
    3) The required document indicator tick is alos ensured in specify user defined text types in BASIC DATA & TOOLS in customizing.
    3)It is also ensured that the EHS <> DMS doc types are linked in customizing.
    4) I put the symbol in wwi report template under GESTDHEADE HEADER User-defined text .
    But when I run the preview (cg42) the space where I have assigned the symbol is blank.
    I even tried to put my required data in Long text in user defined text tab assigning REMARKS as user defined text type but there is no output in  REPORT when i carry out preview.
    Requesting your  comment what shall be the cause of this .
    Regards,
    Ashish pradhan

    Hello all
    the document type SBV should not be used or used only carefully regarding this. I recommend to use a customer specific document type. SBV is related to WWI report templates. Furthermore make sure that generation variant fits usage of data record in which you have set up the document which is located in the user defined text (Active indicator of usage must be set). I know cases in the area of access problemes so that the WWI could not retrieve the user defined document. PLease make sure that you have "checked" WWI layout without error (WWI Check).
    PLease check this:
    if you have uploaded e.g. an rtf file and created a value assignment and you have uploaded the document to be stored in the user defined text than the document is "there". That means: in this process the SAP EH&S process generate a new unique id which should show up in the user defined text (there somthing like this should show up: SBV WWI 0000111223 numbers...)
    Using this unique ID you can check if the document is really in DMS available. Furthermore depending on the EH&S release (support package etc.) you could check this. If you "click" with the mouse key on the unique id (refer above) the SAP EH&S system should upload directly to your client computer the document and start immediatly the corresponding application (e.g. word etc.) . In doing so you can check if the document is "really" there
    May be you need to check further DMS customizing. E.g. depending on the document you have used in upload there is a missing link to the "type" of document. .E.g. the EXCEL macro regarding standard SAP output variant links to I believe a seperate document type
    Hope that helps
    With best regards
    CB

  • Delete link between a DMS document and a change number

    Hi. I've associated several DMS documents to a change number, using CC02 transaction. Now I'm trying to delete these links. I can neither delete them nor delete change number. I've marked "Deletion indicator", but I don't know how I have to continue.
    Best regards, Iván.

    Hi Iván,
    please use report MCDOKDEL: This report is used to delete the Documents which are marked for deletion.
    To delete the linkage between change number and object link, please go to CC02 and select button "Objects". Here you can see all linked objects to this change number. Select tab "Documents" and mark the document for which you want to delete the link. Afterwards please press the delete button. Then the linkage to this document should be deleted.
    Regarding object link problems please see also the following SAP notes:
    880077
    885977 and
    960202
    Hope this information will help you.
    Best regards,
    Christoph

  • Embedding DMS Documents within CG42 Report Template

    Hi All,
    We are using EH&S and DMS and would like to combine these two into a CG42 report template.  Through CG02, we have created specifications where we would like to have some value assignments instances take advantage of the user-defined text tab to pull in documents from DMS.  We have configured the system to successfully link in the DMS document info record into the user-defined tab within the value assignment area of CG02 and can view the DMS documents by double clicking on that reference.
    In taking this to the next step, we would like to embed this document into our report template definition.  Mind you that some of these documents are .pdf containing text and graphics.  Within CG42, we go to the specification symbol that we want and open the area called ADDITIONAL INFO, which then opens to other symbols, one of which is "ESTDF Additional Information - User-Defined Text".   When we open that node, it provides us with many attributes as options that we can embed within the report template.  The only one that relates to content is "GESTDHEADE HEADER Start of UD Text ".  It appears that all this does is just repeat the link that was specified in CG0 when we use the command to include that in the report template and then do a preview on the report.
    In reading some SAP Help Documentation in the section for user-defined text, I'm led to believe that you can embed these into the report template but I have not been able to do so thus far.  The only thing I can do is embed information about the user-defined text into the report template.
    Can someone shed some light if this is feasible?
    By the way, we are already embedding graphic logos by relating it to a phrase and keeping these images in a folder on a file server.  If we must, we can use that approach but I'd really lile to keep these documents in DMS as a controlled document.
    Thanks!

    Hello
    please consult online help. Take a look here:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a7/2872ac0a6c11d28a220000e829fbbd/content.htm
    Chapter: Symbol Type: Specification
    Subchapter: Output of Document Management Documents
    The description is ok and in my opinion a good starting point.
    Hope this helps.
    C.B.
    PS: http://help.sap.com/saphelp_erp60_sp/helpdata/en/a7/286d780a6c11d28a220000e829fbbd/content.htm is helpful too.
    Chapter: User-Defined Texts and Documents
    Edited by: Christoph Bergemann on Nov 26, 2011 5:12 PM

  • Object Link to DMS document - does not allow to link to docs not released

    Hi Folks,
    I am trying to create an object link from cProjects 4.5 to a DMS document. When I select a document in DMS I am getting the message "26 223 Document <doc_number> has not been released". If I set the status of the DMS document to a released status I am allowed to create the object link.
    My question is - why am I only allowed to object link to released DMS documents? I want link to a DMS document regardless of the status.
    Thanks,
    Lashan

    Hi Lashan,
    Not sure whether this works, but do check in CFC01 and see "Document Type Dependent Data'
    Regards,
    Aby

  • Link between table EKKO-EBELN and DMS - Document Management System

    Hi to all,
    I wanted to know the form to connect or link the Document Info Record (inside "Define Object Link") to object DRAW (DMS) with table EKKO-EBELN (order head). In standard form it is possible to do it with EKPO (Purchase order item) This is in transaction DC10 Define Object Link.
    Thanks!
    Greetings
    Martin

    Hi Martin,
    Within table DRAD you can see all linked objects to a specific document info record (DIR).
    To be able to link objects to DIRs you have to maintain the correct objects in customizing.
    First of it is necessary to maintain the correct screen numbers for all needed objects within the customizing. Therefore go to transaction SPRO and select
    Cross-Application Components
    > Document Management
    > Control Data
    > Maintain Screen for Object Link
    Here you can enter all needed SAP objects with the name and
    the related screen number. If you do not know the object or the screen number you can display a list of all SAP standard objects in transaction SE80 under function group CV130 ("Screens").
    So for material master you maintain the following entry:
    SAP object Screen Description Auth.
    MARA 201 material master 1
    Please note that the system automatically adds the leading "1" which is displayed in function group CV130 under
    "Screens". So for object MARA you just have to enter 201 instead of 1201.
    The value "1" in the column "Auth." is necessary to grant that always the latest dynpros and authorizations were used when linking this object to an document info record. This will avoid different problems by displaying linked documents from the object side.
    The next step is to decide which objects should be used in the different document types. Therefore please go to transaction DC10 and choose the relevant document type. Afterwards please select "Define object links". Here you can
    add all needed objects only by entering the object. The correct screen number is taken automatically. Also note the blue information buttons in the upper right corner which contain further necessary information about the possible settings of the current screen.
    After doing these settings in customizing you should be able to link the maintained objects to document info records and oppositely by using the DMS transaction CV02N (tab "object links") or the object related transactions.
    Important notes regarding the object link functionalities are:
    Note 880077: Performance problem using object links
    Note 885977: Extension to note 867241 on object links
    Note 926060: Extension of note 885977 for object link Purchase Order
    Note 960202: Object Links Deleted While Adding New Objects
    Note 1002648: Wrong behavior while using RFC_CHANGE_DOCUMENT_MASTER

  • DMS Document Link in production Order

    Hi,
    When we create a production order and save it after releasing ,it prints orginal copy of shop paper . I am able to print shoppaper but it does not contain Documents present in prod. order. We are fetching this documents from DRAD table in associated ADOBE form driver program.
    But when i reprint the prod. order , i can see documents in shop paper.
    Reason is that DRAD table is not getting updated at that time. i Tried to look for runtime structures but not able to the appropriate value.There is one internal table whihc stores this value but it shows values only when i see its value through debugger else no value comes into it.
    So,if anyone could help that how to get documents number present in prod. order at the time of creation.
    Does somebody knows suitable runtime structure or How to handle delay database update or if there is some other way to do it.
    Please provide some inputs.
    Thanks

    Hi Mayank,
    Kindly find following link. I think you need to make a object link of documents with production order first then you can use these documents for various reports:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
    Hope this will help.
    Regards,
    Ravindra

Maybe you are looking for