Link to Blueprint documents
Hello all,
during the testing a lot of tester had the need to check the blueprint documents. As I know within the test (TA: STWB_WORK) it is not possible to "jump" to the blueprint documentation (TA: SOLAR01/02) of a Business Scenario, Business Process or Step.
Does anybody know how to assure a direct "jump" from a test case to the linked documentation?
Thanks in advance!
Hello Manfred,
if you "create" a Test Case within SOLAR02 with Test Case Type "Manual Test Case" or "Testdocument" and then join "link to a Solution Manager Document" within pop-up "Add Document", you should manage to link to a document (i.e. located at "Proj. Documentation") of any project (even the same you add this Test Case to). After generating Test Plan and Test Package tester will find a link within stwb_work to refer to this document.
I'm sorry to say that obviously the document only can be read (or saved as local copy) that way. I found no way until yet to edit those documents from this link "back into" Test (Case) Document as it is possible when Test Plan was generated from file-server instead from bbp-structure.
See also
regards
Andi
Andreas Küstermann
- Berater Collaboration + Processmanagement -
Cellent AG
Industries Solutions & Services
Geschäftsstelle Neu-Ulm
Edisonallee 1 - 3
89231 Neu-Ulm
Telefon 0731 / 954 487 - 55
Mobil 0174 / 922 84 45
Telefax 0731 / 954 487 99
mailto: [email protected]
http://www.cellent.de
Similar Messages
-
HI Need Business Blueprints Documents
Please search the forums before posting
HI Experts,
I Have a requirement of Implementing SAP BI 7.0 at our client, we are in Bluepriniting Phase and SAP R/3 Ecc6.0 and BI implementations are in Parllel.
We have FI,CO,SD,MM,PS,HR, modules here .
Can some body help me for Sample Blueprints Documents for all modules and Process Documents
It will be very helpfull for me to go ahead in the project.
Regards & thankx in Advance,
Deepak
Edited by: Arun Varadarajan on Apr 9, 2009 8:01 PMHi,
Pls chk this link;
http://help.sap.com/bp_biv235/BI_EN/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/html/index.htm
https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
Regards
CSM Reddy
Regards
CSM Reddy -
Can anyone please provide me Blueprint Document for BW
Can anyone please provide me Blueprint Document for BW on <removed>.I will be very thankful to u,,,and <soliciting points for answers is forbidden >....
Edited by: Arun Varadarajan on Nov 27, 2008 3:00 PMplease search the forums for the same - the necessary links have been given in previous posts and blueprint is something that has been discussed many a time on the forums...
Arun
Locking the post..... -
Can anybody send me BW Business Blueprint document to my mail id: [email protected]
Thanks in advance,
v.senHi,
You can have a look at the link
http://help.sap.com/bp_biv170/index.htm
Business Information -->Blue Print
Regards
Happy Tony -
Tutor: Adding a Prior Activity that does not link to a document
When the docs are published, the Prior Activities come across as broken links if a document filename is not included in the formatting.
Is there a way around this so that if someone clicks on a prior activity which is not linked to a document, it doesn't do anything - rather than appearing as a broken link?
Thank you.Can you provide the exact text that you are putting under the Prior Activity heading?
Kind regards,
Emily -
Is there a way to remove all links in a document???
I need a way to remove all the web links in this document i have. It has like 125 links. Could anyone help???
Thanks.Question already asked and answered.
I gave an AppleScript and an other helper described a scheme relying upon standard features.
Yvan KOENIG (VALLAURIS, France) jeudi 21 juillet 2011 23:08:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
It seems to only give me a choice of linking to a document on my Mac.
You can't hyperlink to icloud. This is what the Pages User Guide says:
Using Hyperlinks and Bookmarks
Hyperlinks and bookmarks are used in documents that will be viewed onscreen, either as HTML files or as Pages documents. You can add hyperlinks to jump to another page or to open an email message or a webpage on the Internet. Use bookmarks to mark passages in the document that you want to refer to as you work.
You can download the Pages User Guide from your Pages Help menu. -
Creating a new "Link to a Document" opens Word document or upload document dialog - plus more!
The Link to Document content type seems to be corrupted at root. When I attempt to create a new Link, either Word opens with a blank document or the "Upload" document dialog opens. It's been changing as I investigate.
One things I've noticed is that the "Link to a Document" Content Type on the parent site collection now shows it's parent as Document. this explains why the Word document opens, but not why the Upload dialog does.
While writing this question, I decided to check further and it seems that the other document types, Audio, Video etc. all now have Document as the parent and are opening a blank Word document.
Has anyone seen this behavior? How do I fix this?
This is on SharePoint 2010.
Thanks in advance.
Barry Cohen
Barry CohenWell, I spoke too soon. The process worked for all the custom content types, but the default Document type was still messed up. I probably should have fixed that one first, but...
Anyhow, the Document type had no template going to the Upload File dialog rather than the blank Word document it's supposed to go to. I followed the same procedure I'd followed for the other content types, checking what worked on another site and using that
template which in this case was a blank field:
So, I went opened Document, Document Content Type and went to advanced settings. The template field was empty, which matched the working site, so thinking that if I saved, it would match up with the working site. I saved the Document content type and when
after several minutes the save failed with an incredibly long list of locations where that were being perceived as "read only" plus several hidden content types that were listed as sealed. This snapshot shows a few of they many pages of content types. (I poorly
struck through confidential info):
Besides this gigantic error, which would require going to hundreds of locations on the site to change read access settings, which are, as far as I can tell actually not "read only" or are inaccessible, such as the hidden "System Page Layout' and so forth
which shouldn't be based upon the default document type anyway and therefor not fixable, I need to understand why this is happening and what to do about it. I don't want to spend the next two days going over all of these libaries and content types and ending
up back where I started with all the content types still screwed up. Afterall, I've spent about a day creating all these custom Content Types only to have the default Document content type loose its settings and corrupting everything and another day fixing
it and having it happen again.
This is a highly unacceptable behavior on the part of SharePoint and I would really like to fix this.
Help is sorely needed.
Thanks in advance
Barry Cohen -
Getting error while generating Business Blueprint Document for Project
Hello Experts,
I hv created a project in Solution manager 3.2 through solar_project_admin . Now iam in the phase of defining its Business Blueprint . I hv completed the steps, at the end when iam generating Business Blueprint document ,following error is being displayed:
<b>Blueprint document cannot be created. Check the selection
Message no. SOLAR110
Diagnosis
A Business Blueprint document created for the selected selection options would contain no structure elements. It would be empty, so it is not created.
Procedure
Choose less restrictive selection options, especially the option
"Print Structure Elements: Complete Selection" in the "Options" tab.</b>
I hv checked this error and the option displayed above in the error message but no such option is being displayed anywhere,can anyone plz help me out with how to resolve this problem?
Requested to revert at earliest as iam stuck with this since many days,My email id is <b>[email protected]</b> .
Regards,
SaumyaHello Horst ,
Thanks for ur reply.I hv now again tried to Generate Blueprint Document with unselecting option Only with Documents but in the structure selection when i tick on all the options given in tat structure then regenerate Business blueprint Document ,following error message is displayed:
<b>Error 130: Business Blueprint cannot be generated
Message no. AI_SOLAR08130</b>
For this error no long text/ explaination exists .But when i try to generate Business Blueprint Document with unselecting option Only with Documents but in the structure selection unticking on all the options given in tat structure then following error message is displayed:
<b>Blueprint document cannot be created. Check the selection
Message no. SOLAR110
Diagnosis
A Business Blueprint document created for the selected selection options would contain no structure elements. It would be empty, so it is not created.
Procedure
Choose less restrictive selection options, especially the option
"Print Structure Elements: Complete Selection" in the "Options" tab.</b>
Plz revert back, wt shld i do now?
Regards,
Saumya -
Is Pages 5.0.1 is there any way to link one Pages document to another Pages document? If so, Please, How?
Well, you could trade it in for a white one!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
hi,
i am having a requirement to create/use "add link to a document" content type for a item in the document library.
so i got the code from below site :
http://howtosharepoint.blogspot.in/2010/05/programmatically-add-link-to-document.html
my issue is, if teh document library names are single words - like MOM, model, procedures etc this functionality is working fine and i am able to view the link to a document as an item.
but when the doc lib name contains special characters like , or / , this link to a document content type functionality is NOT working.
can anyone pls point me whether this is the actual issue ? ie, if the doc lib name contains special chars like , or / my
add link to a document wont work? is there any restrictions/limitations for doc lib names in SharePoint ?
for eg: my doc lib names are :
1) Report and analysis, Data
2) form / template
3) map/ plot
help is highly appreciated!hi,
its talking abt the subsite names and folders and NOT the document librraies.
is there any link which gives the naming convention / restricted names for document libs or splists , from msdn / blogs.technet.
thnx -
Internal Links in HTML Document Not Working Correctly in PDF
I have an HTML document that contains internal links (basically a Table of Contents). When the document is displayed in a browser, the internal links work correctly. However, when I use Acrobat 8 Professional to create a PDF version from the HTML source, the links don't go to the correct place when clicked. It almost appears that they are off by one, e.g., link 7 goes to anchor 8. I can send the source document for you to look at if you email me at eharris -at- synnovation.com. I am not expert in HTML and perhaps the links/anchors are not done correctly when I create the HTML document. Does anyone have any ideas on this?
This one has the same problem. For instance, "Anchor1" as <a name="Anchor1"> appears 13 times. I am sure that your problem is that Acrobat is going to the last occurance that is just before the first one. As I scan through the file I find similar results for all of the anchors. When I used Tidy, it reduces about 1350 errors to about 474, but that is still not too good. The validator is flagging a lot of identical IDs as well as unrecognized attributes (like ONSELECTSTART). The attributes correctly accepted by body are
Attribute Specifications
* BACKGROUND=URI (background image for document)
* BGCOLOR=Color (background color for document)
* TEXT=Color (text color for document)
* LINK=Color (link color for document)
* VLINK=Color (visited link color for document)
* ALINK=Color (active link color for document)
* ONLOAD=Script (document has been loaded)
* ONUNLOAD=Script (document has been exited)
as listed on htmlhelp.com for HTML 4. There may be some new ones in HTML 5, but I did not check.
I am not looking at all of your HTML in detail, but there appears to be a lot of unneeded things based on the error messages from the validator. Many browsers will let you display the stuff (even Acrobat), but there may be errors that crop in when you do not expect it or on some other browsers that the one you check. Thus again, you should use a validator. If you are only off a few tags that might be fine, but when it is in the 1000s, there is an issue. It would also be good to break your page up into parts. It is good practice on web pages for each page to be not much more than one screen. That is often exceeded, but 59 screens of info (on my screen) is a bit much. The TOC is definitely needed in that case, but just was well go to a sub page just as well and make the info easier to track. A PDF (as you are trying to get) could be made of the entire system for those that want it all in one bit. Bill -
My client needs to be able to create a link to a document on the server in Incontext editor
My client needs to be able to create a link to a document on the server, but I dont want to allow FTP/File manager access as this gives him opportunity to delete pages and files.
How can you give him safe access without giving access to the files?The only other way to upload the document to his site is to use Media Downloads, also known as Literature in some part of the system. Then, inside the InContext Editor you click on the link and and select page from my site, then link to the literature item created.
That's all.
Cheers,
-mario -
How to create a 'Link to a Document' Item in a SharePoint Document Library using power shell?
Hi,
I have a document library with "Link to a document" content type. And, I have to add some links into that library using powershell. I have searched enough regarding approachs for adding a link into the library in powershell but i did not get anything yet.
Please provide some approaches and code samples to solve this problem.
Thanks,
Lalit Kumar MishraAdding Site Columns To Content Types Using PowerShell
Adding Site Columns To Content Types Using PowerShell
The below PowerShell script will allow you to add a metadata field that is either contained at the Site Collection level, Site level, or library level, to the specified Content Type.
It also contains some optional lines that you might choose to include or exclude, such as
Setting the visibility of the column in the edit form to hidden
Setting the status of the column to require values
01
function Add-SPContentTypeField
02
03
<#
04
.Synopsis
05
This function will allow you to add a library field to a Content
Type
06
.Description
07
This function will add the nominated site column/ library column to a nominated Content
Type within all of the 'Document Libraries'
in the given Site Collection
08
.Example
09
C:\PS>Add-SPContentTypeField
–SiteUrl “http://yourdomain.com/sites/Finance –FieldName
"myField" -CTypeAddedTo "myContentType"
10
.Notes
11
Name: Add-SPContentTypeField
12
Author: Petro Margaritis
13
Last Edit: 19/07/2012
14
Keywords: Fields, Site Columns, Content Types
15
.Link
16
http://thesharepointproject.com/
17
#>
18
19
Param (
20
[parameter(Mandatory=$true)][string]$SiteUrl,
21
[parameter(Mandatory=$true)][string]$FieldName,
22
[parameter(Mandatory=$true)][string]$CTypeAddedTo
23
24
25
$site = Get-SPSite
$SiteUrl
26
27
# Walk through each site in the site collection
28
$site | Get-SPWeb
-Limit all | ForEach-Object {
29
30
write-host
"Checking site:"$_.Title -Foregroundcolor
Green
31
32
# Go through each document library in the site
33
foreach
($list in $_.Lists | where
{ $_.BaseTemplate -eq "DocumentLibrary" })
34
35
36
# Check to see if the library contains the content type we are looking for
37
if (($list.ContentTypes |
where { $_.Name -eq $CTypeAddedTo
}) -eq $null)
38
39
Write-Host
"The Content:" $CTypeAddedTo "does not exist in the library:"
$list.Title -Foregroundcolor Red
40
41
else
42
43
# Check to see if the library contains the field we are looking for
44
if (($list.Fields |
where { $_.Title -eq $FieldName
}) -ne $null)
45
46
# Get the content type you want to add the field to
47
$ct
= $list.ContentTypes[$CTypeAddedTo]
48
# Get the column you want to copy
49
$field
= $list.Fields[$FieldName]
50
# Add the column to the content type
51
$ct.Fieldlinks.Add($field)
52
$ct.update()
53
54
# Add additional column settings
55
$ctFieldLinks
= $ct.FieldLinks | Where
{$_.Name -eq $field.Title}
56
# OPTIONAL: This will set the column to hidden so that it is not viewable in the edit form
57
$ctFieldLinks.Hidden =
$true
58
# Set Field to require value
59
$ctFieldLinks.Required =
$true
60
$ct.Update()
61
Write-Host
"The Field:" $field.Title "has been successfully added to the library:"
$list.Title -Foregroundcolor Cyan
62
63
else
64
65
Write-Host
"The Field:" $FieldName "does not exist in the library:"
$list.Title -Foregroundcolor Yellow
66
67
68
69
70
# Dispose of the site object
71
$site.Dispose()
72
Simply copy and paste the above into Notepad and save it as a PowerShell file with the name
Add-SPContentTypeField.ps1
view sourceprint?
1
# To run the above function you'll need to do the following - go into the saved location
2
Cd C:\scripts\
3
# Then call it using the dot prefix - note that there is a space between the dots, ..\
4
. .\Add-SPContentTypeField.ps1
5
# Now we can happily run the script like so
6
Add-SPContentTypeField –SiteUrl “http://yourdomain.com/sites/Finance –FieldName
"myField" -CTypeAddedTo "myContentType" -
Link to Excel document in site throws "Document with same name already open"
I have an Excel document stored in a document library in SP2010. I provided a link to the document in a CEWP on a page. When clicking the link on the page, Excel throws the erorr "Two documents with the same name cannot be opened" error.
When clicking the link in the document library, the Excel workbook opens fine. When hovering over both links, the URL in the status bar is identical. Here is the link in the page:
<span style="width:120px; padding-right:50px;">
<a class="ms-addnew" href="https://mydomain.com/sys/groups/ermcg/RA/Shared%20Documents/RA1.xlsm">
<img src="https://mydomain.com/sys/groups/ermcg/RA/SiteAssets/excelsmall.jpg" style="border:none;vertical-align:middle;"></img> Download to Excel</a>
</span>
Thanks in advance,Hi jd_hancock,
The scenario is not reproduced in my environment.
I used Fiddler to check whether there are differences between them to download the file, it seems the same and the file also successfully opened in the Content Editor Web Part.
I would suggest you to use the same way to check whether the download process is the same, also, type the url directly in the address bar, whether the document can be opened as expected?
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support
Maybe you are looking for
-
Compare characteristics in a query
Hello, we have an InfoCube for FI transactional data and a Master data InfoObject for 'Terms of Payment'. We would like to create a query which compares the 'Terms of Payment' values in the transactional data, as booked by users, with the 'should-be'
-
ACR vs Aperture for Raw Processing
I have been using Lightroom for over a year (including beta versions on my old PC), but have grown tired of it's lack of worthwhile output options. I have a trial version of Aperture and think that it is a far superior product on the management and o
-
How to stop the vi dynamically called out?
Some vi was dynamically called out by the attached vi, may I know how to close it using the vi reference. Thanks Solved! Go to Solution. Attachments: PubSub_Start_VI_Dyn.vi 25 KB
-
Adding automatic header using OC4J
Hi, I have a web application coded in pure java and deployed to an OC4J container. In that application, I used iFrame to open a new session in another server in the frame. The new frame shows Oracle BI reports, as if it is a part of the developed app
-
Safari will not work after Snow Leopard Install
Safari does not work. It opens briefly, then closes. I get a message to "click reopen to open application again," but the same thing happens. Please advise.