Linking Corporate cockpit and Business Unit Cockpit

hi all,
Our requirement is to create Management cockpits for Corporate and Business unit : providing a picture of overall situation in corporation as well as in its strategic business units.
The user should be able to move from aggregated figures for the entire group to the detailed information on each stategic business units.
My problem is how should i link Corporate Cockpit with Strategic Business Unit Cockpit so that the user would be able to move from aggregated to detailed information ?
Thanks in advance for suggestions.
regards,
Yogesh

Hi,
Q no 1:
Sourcing Cockpit is an area from where you can source the requirements..There are two ways  by which sourcing can be done.
1. The Purchase requisiton created from ECC 6.0 can be pushed to SRM for Sourcing . Either direct material with Part no or
Service requirement without part number
2. The shopping cart created in SRM can be converted to sourcing.
once the requirments are flown from ECC 6.0 and  SRM . in the SRM server in sourcing node--click Carry our sourcing.
you can get all the requirements.
From this  you can convert  it to Purchase order,contract,Auction. Bid invitation.
Q. no 2 :Business Rule Framework.(BRF)
This is related to Workflow .From SRM 7.0 this workflow is called Process controlled workflow. Only by simple rules the
Workflow for  Approval process for P.O ,Contract,Bid invitation can be done.
If you are SAP ABAP person they you can confugure this .Normally  ABAP person will do this.. Please go to S ID and get the
details there for Business rule framework
Just check in this forum in Search you can get more details and notes
go to  Google.com and enter business rule framework you get more material
check this link
http://www.sdn.sap.com/irj/sdn/nw-rules-management?rid=/webcontent/uuid/d00df7db-c783-2b10-aa97-ccfeacc19fcb [original link is broken]
Regards
G.Ganesh Kumar

Similar Messages

  • How to Capture Multiple Cost centres and Business Unit information in a project?

    Dear Experts,
    With the help of UDA functionality in project super responsibility, I have captured Cost centre and Business unit information and this info will be used/reflected in CC and BU segments of all transactions gets recorded against that project.
    Now, our user wish to have multiple cost centres and business units to be tracked in the same one project. How is this feasible? Below example describes my requirement in a summary, please advise.
    An Indirect project is created when a defect on a machine reported from client's customer and all subsequent activities (purchases, travel to customer site to analyse and troubleshoot, purchases for any in-house analysis etc..involves costs spending internally) in resolving that defect/project involves 6 to 7 different departments (Sales, Tech Support, Quality team etc.,who actually work/travel and spend costs against project until defect resolution). And, each of the above departments will have 1 dedicated owner (project owners) to manage that project and each of these 6 or 7 owners owners will have their own cost centres (eg: 2345 - Sales team) against which they wish to see their transactions (travel, purchases during defect resolution) globally.
    So, all I want to know is how can I make one single project to accommodate multiple cost centresand business unit information to be assigned using UDA? Please let me know if I am not clear.
    Regards
    Venkat

    I think you should use the expenditure organization on the transaction itself to derive the CC/BU. Have AA lookups and define AA rules where you look at a Exp Org to BU or Cost Center to derive accounting.

  • Table for link with BP and Org Unit

    Hi experts
    i'd like to know what is the table where there is inside the link beetween BP and Org Unit.
    I know that the table HRP1001 links users to Org Unit but i cannot find the BP
    regards
    andrea

    Hi
    you can always find the link between Org unit O and its related BP in table HRP1001.
    Key in Org unit ID in the table selection parameter OBJID and execute. It will list postions (S) assigned to the Org ID and its BP number. Look at the relation B207(subtype) which will show O-BP assigment. It will be the last entry in the output list.
    R/Reddy.

  • Business process and business unit in compliance calibrator

    Dear Experts,
    Can any one please tell me the use of business process in rule architect and business unit in mitigation control.
    Thanks and Regards
    A.Rama Krishna

    Dear Rama,
    Basically business processes are the actual day to day processes any oraganisation carries out. When we have to group tcodes / functions for rule creation , we group them according to a business process so that we can easily relate them to each other within the business process. Eg : Procure to Pay.
    So the rules have to be created such that in this process there are no SOD violations in the access given to users. Thus it makes risk analysis more logical and simple for analysis.
    Thanks,
    Yajuvendra Sonalkar

  • Link consolidation dimension and consolidation unit

    Hi,
    In SAP EC several standard dimensions are provided, such as the dimension for Companies and the dimension for Business area consolidation.
    Looking at the Master data hierarchy a button 'Companies' is shown when the global settings use dimension '01'. The button changes to 'Business Area's' when you choose for the business area consolidation dimension.
    Question: What makes dimension '01' a Company consolidation and the other dimension a Business Area consolidation? Looking at the master data the only difference seems to be the length of the consolidation group and unit field.
    Can anyone help me with this question?
    Rgds,Frie

    I have found the solution myself: it is in trx CXN6.
    Thanks all,
    rgds, Frie

  • Link between delivery and handling unit split items

    Hi All,
      I have an delivery wit 4 different line items. While creating the Packing we created the Handling units for the delivery.
    In Handling unit one line item is split into 2 boxes.
    like   handling unit     gross weight
                1                        20
                2                       20
               3                        20
               4                        10  split
               5                         10 split
      so now i want to display the delivery line item and gross weight. For last line item i have to add the both handling unit 4 and 5 and display the gross weight.
    In VEKP table i have only delivery number for the reference for all handling units. but not line item. So how can we find out for which delivery line item of the handling unit was split.
                           Thanks,
    Venkata Pavan Kumar. Chandrapatla

    Hello,
    Use item level table VEPO for all the details.
    I hope this will solve your problem.
    Regards,
    Nabheet Madan

  • Please help me  to find link between customer and Business partner

    Hi All,
    With the help of customer number as input for my report, i have to find the Business partner.
    Please help me how  to find the Business partner based on the customer number using tables.

    hi,
    Get the customer address number from the KNA1 table
    and pass that to the FM ADDR_GET with address group as BP( business partner)
    you get the Business partner address number and from that you can find the business partner number from KNA1 table
    or in KNVP table field KUNN2 gives the BP number
      DATA: w_selection_ds     TYPE  addr1_sel,
            w_addrprnt_ds      TYPE  adrs_print,
            w_adrs1_ds         TYPE  adrs1.
      clear w_address_value_ds.
      w_selection_ds-addrnumber = w_kna1_ds-adrnr.  "address number
      CALL FUNCTION 'ADDR_GET'
        EXPORTING
          address_selection = w_selection_ds
          address_group     = 'BP'         "business partner
        IMPORTING
          address_value     = w_address_value_ds
        EXCEPTIONS
          address_not_exist = 1
          OTHERS            = 2.
    regards
    Prasanth

  • Error count based on business unit and Vehicle type

    Hi,
    i have a custom error idoc table which contains idoc no, business unit, vehicle type and error message.
    Now here my requirement is to display the total count(Error count) of each message based on business unit and
    Vehicle type and display it in the output list as shown below. what is the best way to achieve this as there will be number(atleast 6) of error messages available for a business unit based on vehicle type and there are around 15 business units  overall for which i should display the error count.
    buisness unit| Vehicle Type | Status | Error message                            |                   Error count
    71320            WT10               51          Organizational channel missing                      10
                          WT10              51          SMC Missing                             |                      15
    72000          WT20                51            Creation of vehicle not possible|                    12
                        WT20                51            Status change not requested    |                     10                      
    regards,
    Mani

    Hi,
    Assign business unit level read access to your entity for which you have written the Report.
    Assign the respective business unit to the user, in your case assign business unit Partner to user Partner
    and  business unit Manager to user Manager 
    Also use filtered view in your report if it is SSRS report.
    Regards
    Ayaz

  • Show reports based on business unit in crm 2013

    Hi,
    I have two reports Partner Report and Manager Report. I have created two business unit Partner and Manager. I want to show Partner report to Partner Business unit as like Manager report show only Manager Business unit. Please tell me how is it possible?

    Hi,
    Assign business unit level read access to your entity for which you have written the Report.
    Assign the respective business unit to the user, in your case assign business unit Partner to user Partner
    and  business unit Manager to user Manager 
    Also use filtered view in your report if it is SSRS report.
    Regards
    Ayaz

  • ABAP and Business one

    Hi Friends,
    I tried searching the net for details but i was not able to clearly find. Hence i am posting on this forum. Hence, i apologise for asking such a basic question but i believe that you people can clarify my doubts
    I am working with SAP ABAP for the past 2 years. It was recently one of my colleague suggested about SAP Business one. My queries are :
    1. Is there any link between ABAP and business one ( i.e does it make sense for an ABAPer to learn business one. Are there any concepts of ABAP which we use in Business one)
    2. Is it worth to change your skill set from ABAP to business one?
    3. How good is the market for Business one ?
    Expecting your reply. Thanks in advance.
    Cheers,
    Prem

    1. Is there any link between ABAP and business one ( i.e does it make sense for an ABAPer to learn business one. Are there any concepts of ABAP which we use in Business one)
    ANS: There is no link between ABAP and SAP B1.
    2. Is it worth to change your skill set from ABAP to business one?
    ANS: This is left to the individuals mindset.
    3. How good is the market for Business one ?
    ANS: Market is good for experienced people

  • Displaying business role and organization unit info in context area

    Hi gurus,
    I want to bring the business role and organizational unit details with which the user has loogged in the web UI in context area.
    Other idea may me next to the logo. Below is the example how it should look like
    Logged on as: Business role/Organization unit details
    Can anybody please help.
    Regards
    Yogesh

    Hi
    The following link provides required solution.
    https://wiki.sdn.sap.com/wiki/display/CRM/WelcomeUserMessageinWeb+UI
    Paparao

  • Message no. DPR_FIN_GECCO024 Error occurred in accounting - see link controlling cockpit (cProjects)

    Hi, everyone
    I'm integrating PS( which is on IDES system ECC6 PH6) with cProjects( which is on DEV system ECC6 PH6 PPM 5.0). I've done customizing in DEV and IDES. The Controlling Method is Multilevel Controlling (Structure Element, Automatic).
    When I'm saving a project with status 'to be transferd', the warning message appeared and I'm failing to assign PS Project automaticlly. But manual assignment works fine.
    Error occurred in accounting - see link controlling cockpit (cProjects)
    Message no. DPR_FIN_GECCO024
    Diagnosis
    Errors occurred when transferring to accounting.
    System Response
    DPR_FIN_GECCO 024
    Procedure
    Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. In the cockpit, you can create a variant with your Project Management project under Selection Variant Orders Project Management. The errors that occurred are then displayed. If no messages are displayed in the controlling cockpit, they have already been processed or deleted. If this is the case, trigger the transfer again.
    No more messages are displayed once the transfer has been carried out successfully (that is, no errors occurred).
    Here is the problem:
    In this Message, I was told to Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. But actually, I can not find the Controlling Cockpit (Project Management) link on the Accounting tab page. It was missing.
    I don't konw what‘s the problem with the missing Controlling Cockpit and how to deal with this warning message getting automatic PS assignment done.
    By the way, I've done IDES test, cProjects and ERP system were integrated on the same system with RFC destination NONE. And that works fine on IDES, so I guess I've done the right customizing in the ERP system( IDES).
    Best Regards,Yemi

    Hi Yemi,
    Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
    1) In Project-->Accounting tab
    2) Through tcode - COCPCPR
    You can try the second method to view the error details.
    And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
    Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
    Project profile name : CPR0001
    This project profile is used when an automatic PS project is created through accounting integration.
    Hope this helps.
    Regards,
    Ravi

  • Linked Office 2013 Home and Business to incrorrect Microsoft account.

    Hi Guys,
    I was installing Office 2013 Home and Business for a customer and I accidentally linked the Office product key to my own personal Microsoft account. How can I transfer this to the customers correct Microsoft account?
    Thanks
    Aled

    Hi
    As far as I know, we might not be able to relink a Office product key to another Microsoft account by ourselves.
    Contact Microsoft Customer Service might help you:
    http://support.microsoft.com/kb/295539/en-us
    Regards
    Tylor Wang
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • BP change documents ( linking problem between Object id and Business Partner)

    Hi,
    We need to create a report for documents changed for a Business partner.
    This will be done in sap bw.
    on source side I have created the datasource with function module changedocument_read and I am getting most of the information
    which I want. Only missing part is Business Partner number.
    Can somebody suggest , how I would be able to link Object Id to business partner.
    I need to pull everything that is changed at BP level and the Object class selection around 30 in number.
    So I am looking for any standard function module which can provide me the link between Object id and Business partner.
    If I establish the rules to determine the Business partner from Object id , its getting bit difficult.
    Can somebody please help/suggest.
    I have gone through many documents and scn posts but unable to find anything on this.
    Thanks !

    Hi, looking at the change history header table CDHDR it seems that object ID simple equals the internal format of the business partner number.

  • Same Org as Business Group and Operating Unit cannot be migrated via isetup

    Hi,
    I have tried to migrate the setup of an organization which is classified as both Business group and Operating unit.
    When it comes to Operating unit API, it errors out with the following Warning message.
    I request the iSetup Team to clarify whether there is any restriction in iSetup that the same org as BG and OU cannot be transferred.
    If yes, then how to migrate the same...
    The above situation happens for the org classified as OU and IO. In this case the INV org API give the warning message.
    Regards,
    Senthil
    Name: HR_OperatingUnit
    Type: BC4J
    Path: oracle.apps.per.isetup.schema.server.OperatingUnitAM
    Time Taken(seconds): 1.0
    Importing rows from xml file, and validating rows ......
    Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Operating Unit; KEY = Name = 'POC Business Group'
    Group Name = 'POC Business Group'
    ; EXCEPTION = The organization 'POC Business Group' is a business group, please use the business group API to handle it
    Transaction rolled back
    Processed API:HR_OperatingUnit
    Generating Deployment Report...
    Generation of Deployment Report process completed.
    Status: WARNING
    ******************************************

    It is a known issue and has been fixed as a part of HRMS 12.0.7. You may apply HRMS 12.0.7 or request for back-port on top specific version.

Maybe you are looking for

  • New Release Strategy in case of PO amendment

    Dear All, We have the release strategy at PO level on 3 parameters, Purchasing Group, Value and Document type.. for each parameter we have created the characteristics EKKO- EKGRP, EKKO-BSART, EKKO-GNETW. Till date system is working ok and trigreeeing

  • Something went wrong . . . Help?

    I bought the Emery cd The Weak's End from itunes and for some reason when I started listening to it for the first time a weird fuzzy noise was in the background. Thinking it was my speakers I listened to another song from another cd and it worked fin

  • Using JNDI to keep a independent session

    Hi. I want to design a hashtable of session attributes connected in the JNDI tree in a J2EE application. My motivation is to instead of using the Session object provided by the servlet to store user dada, use an object acessible anywhere in the appli

  • User OblixAnonymous not found

    Hi All I am getting a message in the log that "User OblixAnonymous not found" when I tried to track the user self registration . What went wrong and why this user is not found ? Thanks

  • Find new width and height of a rotated item

    hi all, I have an issue where I have a rectangle that I rotate and I need to know the new width and height of the bounding box of the rectangle when it has been rotated example: I have this rectangle shape so its known width and height is 20pixels x