Linking the Employees and Departments Reports - 2Day+ tutorial

Hi Guys,
I am APEX newbie and started off with the 2DAYPLUS tutorial. Got stuck in the "Linking the Employees and Departments Reports" part.
I followed the instructions (even did it twice) where you you create a select list of department which will populate your employee table according to the Department you select.
Can't seem to make it work. So when I select Accounting or anything form the drop down list, the Employee table remains unchanged. Anyone else had similar issue? Not sure if its me or there is a step or two missing in the tutorial.
Section in TUTORIAL: http://www.sloug.org/i/doc/TDPAX/td_bldemprpts.htm#BCECEDHD

:::SOLVED:::
For search engines:
I missed the part:
b.Select List Control Type - Select Select List with Submit and click Next.
Well actually didn't miss it, there wasn't that option in my APEX installation (maybe tutorial is a bit outdated for earlier version of APEX).
If you have already created the Item and it does not work then:
1) Go to EDIT for that P3_DEPARTMENT_ID
2) Scroll down to SETTING section
3) In PAGE ACTION WHEN VALUES CHANGE choose SUBMIT.
this achieves the same result as (b) above.

Similar Messages

  • Ability log and track the time and expense reports of the sales employees

    Hello Experts
    Ability to log and track the time and expense reports of the sales employees.
    Can we do this through WEB UI
    Please revert.
    Regards

    Hello
    Thanks for the reply
    I thought of storing time zone in the time and use session variable to pick up user's log in info along with time zone that he is associated with.
    However, if it has to be maintained by a table, then it should be manually updated right? I don't think that's what I want to do because a lot of our users travel a lot for short time, so they may not have their time zone info updated in the DB table when they are traveling somewhere else for a brief period while accessing OBIEE.
    So my question is, how can I pick up user's locale time zone setting and make sure that the data, such as hour conversation are converted along with the displayed time stamp?
    Thanks

  • Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy

    I Created a power view in Excel 2013 and uploaded to my Power BI for o365 site.
    But when i click on my excel file it opens in browser,After that i click on File tab its showing me two option 
    1. Save a Copy
    2.Download a copy
    When i click on save a copy its showing me an warning below
    Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy.
    Continue with Save?
    If i continue saving it only saves an excel files with data only not the power view which i want to save with applied filters.
    Please help me for this

    Just to clarify, when you hit the option of Save As Copy, the whole experience goes into a "read-write" mode in Excel services, which currently doesn't support authoring, just consumption of PowerView sheets.
    Two mitigations that come to mind:
    1. Download the copy (as Brad suggests), rename the file and upload.
    2. Use the send to option of SharePoint online, give the file the right target document library (can be the same as source) and rename the file:
    GALROY

  • How to move all the standard and adhoc reports from cube to multi provider

    How to move all the standard and adhoc reports from the basic cube to multi provider?
    i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
    what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
    Thanks in advance sdn experts!

    Hi Les,
    This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
    Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
    After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
    Hope this helps...

  • Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

    can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

    OK, let's try these................ 
    1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu.  When done, restart back to your desktop, repair permissions and restart your computer.  Re-connect your printer. 
    2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1.   Repair permissions, restart your computer & re-connect your printer when done.
    The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
    3 - Check out the following KB Articles:
    Mac OS X 10.4 Help: Connecting to a network printer
    Epson Printer Drivers v2.10 OS X
    Adding a printer to your printer list in Mac OS X
    Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
    ======================
    If still unsuccessful after trying all of the above, the problem could be your iBook or human error.  You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

  • Setup needed for ACH payments to the Employee and Supplier

    Hi,
    I am looking for a document to know the setup steps needed for ACH payment to the Employees and the Suppliers. Can anybody give me a detailed document on that or let me know where I will find one?
    Thanks,
    Arun
    Edited by: 834011 on Feb 4, 2011 3:55 PM

    hi
    I am working on 11i to R12 upgrade project.
    All I have is SQL and flatfile from 11.5.10 instance..I need to implement ACH in R12...
    How this flatfile is created in R12
    Do I need to create a Etext RTF template in R12? My bank is wellsfargo
    I need to create and implement ACH/credit/debit format in R12 environment.
    whate are the steps to create a bank accepting flat file in R12
    Can you please tell me how should create the flat file in r12? Should i create etext template or
    XML RTF template..
    appreciate your reply
    kp

  • Tables linking the invoice and accounting document

    Hi,
    Can anyone tell me tables linking the invoice and accounting details table BSEG?
    Regards,
    Shanu

    Following BSEG fields can be found in VBRK
    MANDT
    BUKRS
    BELNR
    GJAHR
    ZUONR
    VBUND
    VBELN
    ZTERM
    ZLSCH
    BVTYP
    MSCHL
    MANSP
    MABER
    STCEG
    XEGDR
    KKBER
    KIDNO
    BUPLA
    Similarly following fields can be found in VBRP
    MANDT
    VBELN
    thanks
    G. Lakshmipathi

  • Automate the database and forms / reports services to start on windows 2008 server R2 startup

    Dear memebers,
    I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
    Regards:

    Hi,
    type services.msc at run
    then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
    HTH

  • Element entry against the employee and company

    How do u check element entry against the employee and company? Don't we have to use Benefits tables. And what tables are we supposed to use.
    Many Thanks

    I got my phone in october, faxed in paystub at the same time. The store told me 1-2 billing cycles. When the first bill came it wasnt on there, I went into another verizon store and they told me its faster to bring them the paystub so they can take a picture of it and "instantly" get it in the system. Then the next bill came and it still hadn't been fixed so we called and then they gave us some "ticket number" and told me it should be on the next bill. This months bill is here and and its STILL not there.  This is ridiculous. customer service is TERRIBLE!  There is only one number for customer support and they are helpless.

  • My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

    My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

    And never heard of one case of AHT finding or reporting a real GPU related problem.
    It does sound like the graphic card and best way to know is to swap it out, even if you have a PC card around.

  • Linking of Main and Sub Reports

    Hi,
    We have a requirement to integrate all the crystal reports (say 10 nos) into one single main report for the statutory purpose as per the client requirement. Basically client would like to view all these ten reports in single file by export them into single PDF. These sub reports are also going to work as an individual reports independently and having their own prompts. The data source for these reports is SAP BEx queries.
    Please let me know best approach for integrating these reports, since user doesnu2019t want to
    pass the values for duplicate prompts. Please note there are common prompts (BEx variables) across these sub reports.
    I have done the PoC for linking single sub report using Xtreme data base and here are my results.
    1.      Create a Blank Main reports and create a Country Prompt.
    2.      Link the sub report with main report using this Country Prompt.
    3.      Link the sub report with main report prompt and edit the sub report selection formula with the main report prompt u2013 u201C{Customer.Country} = {?Pm-?Which Country?}u201D
    4.      While refreshing the report, it will refresh the sub report based on the main report prompt value and shows corresponding data.
    5.      This approach works for single report and gives the expected results and asks only single time prompt selection.
    Challenges On the above approach while implementing using BEx Queries as a data source are:
    u2022      We need to equate the SAP BEx characteristics to this prompt:
    Ex:       = {?Pm-?Which Country?}
    That means we should have set of BEx queries which doesnu2019t have variables. At run time filters will be assign based on the main report crystal reports prompts. Again there could be some mandatory prompts and optional prompts and multi values etc.
    Will it affect the performance of the Crystal report while you apply filters at report level instead of BEx query level?
    u2022      We donu2019t want to modify the individual sub reports selection formulas and queries for linking purpose.
    Please let me know youu2019re best solution approach for the above issue.
    Thanks in Advance
    Regards
    Som

    If I understand correctly the main issue a report running as a sub report being run as a main report.
    I have a solution.
    for each of the sub reports build a new main report
    ie if you have
    sub report 1
    sub report 2
    then youhave a master report that calls them
    you would build
    Main report 1 ( which ONLY calls sub report 1)

  • The mismatch in the S_ALR_87012028 and AR02 report

    Hi
    I have the difference in the S_ALR_87012028 and AR02.
    The current book value of the S_ALR_87012028 is not matching with the AR02. The S_ALR_87012028 report is true. The problem is only with AR02.
    After the analysis I found that the Revaluation values are not taking into consideration in AR02 for the Depreciation Area 12, which is a derived depreciation area.
    What are the transaction types which cover the revaluation and how these transaction types are to be assigned to the Asset history sheet?
    How to add this transaction type to the transaction group and then to the AR02?
    Can any one help in this regard?
    Thanks and regards,
    SAP Care

    Hi Madhu,
    Thanks for the help.
    Please check the below config in my system:
    In AO80,
    503     Revaluation APC u2013 Transaction type grp   55    Post depreciation (there is no updation in the field Asset history sheet.. its blank) and also,
    504     Revaluation of accumulated depreciation - Transaction type grp   55    Post depreciation (there is no updation in the field Asset history sheet.. its blank)
    And in the asset history sheet version, we have added - Reval FY start u2013 with the parameters u2013
    YA -   Accum.values as of FY start     (History  .   .   .   .   .   X   X   X)
    Now, do I need to add the YA in asset history sheet for 503 and 504 in AO80, in order to get the Revaluation values to be flown in to the Asset history sheet?
    Or the settings which I have provided is right and something else is needed to configure or change?
    The other problem is that the values are flowing rightly in all other depreciation areas, except 12 - Ord depreciation with Revaluation.
    Thanks in advance for the help.
    Thanks and regards,
    SAP Care

  • Problems about linking the skype and the microsoft

    My skype account cannot link to the microsoft account(Before this, I already unlinked the original skype and microsoft) . When I logon the skype with my microsoft account, I found that there is an another skype account and this account is useless for me. Now I just want to delete the useless skype account of the microsoft and then link the original skype to the microsoft. What do I do to relink those accounts?

    The sequence you should be using is:
    1) start the listener, which will monitor the network for database requests
    lsnrctl start
    2) start and open the database, which will also register back to the listener. Could be done by a properly configured OEM DBConsole, or command line
    sqlplus / as sysdba
    startup
    exit
    3) If database started before listener, then you could register the database manually
    sqlplus / as sysdba
    alter system register;
    exit
    4) Verify that the listener knows about the database and will handle requests for the database
    lsnrctl status
    and check the output whether the database service is recognized.

  • Link between Employee and Cost center and TCode CAT2

    hi all,
    can anybody tell me where is the link b/w a PERNR and Cost center (which infotype) ?
    if anybody has played with Tcode CAT2, please revert back !!!!!!!!!
    Any help will be rewarded !!!!!!
    Thnx,
    Preeti

    hi puneet,
    i have to upload some data in tcode CAT2. There is Cost center that appears in header record of this employee (say 1000) in this transaction ( and say his KOSTL is D010000).
    But when i try to update any other cost center with an activity type, it gives me error message and does not allow me to save data.
    However, if the COST CENTER <b>CATEGORY</b> is same for all three (activity type, Cost center m tryin to upload and Cost center in header), it allows to save and upload the data.
    so my ques is :-
    is it necessary to have cost center category same for all the 3 fields or is there some conf. problem?
    plz help !!!!!!!

  • Link between Base and Target report

    Hi All,
    We have a scenario. We have a base report based on a Custom Object from which we are passing a field value (which uses a joined field value from Product Object) to another target report based on another Custom object which matches the values passed from the base report(link field).
    Also in the Base Report we have specified the Navigation report and prompted the link fields accordingly in both the reports
    But when we click on the hyperlink in the base report, the matching values are not displayed
    Both these reports are REAL TIME reports. We tried the same kind of link between these two Objects using Account Name and it is fetching the matching records.
    What can be the reason behind this? Is it because we are passing the Joined field value as the reference to the target report the matching records are not shown?
    Kindly share your ideas.
    Thanks and Regards,
    Sabarish

    it could be that the formula for that filed in both the custom objects is different 'coz of which its not working

Maybe you are looking for

  • Acrobat 9 and Validating Digital Signatures

    I'd heard that Acrobat 9 had found a way to eliminate the problem of sending your certificate to everyone who needs to validate your signature on a form, but I haven't been able to prove that. I'm testing 9 and so far the only difference I see is tha

  • Illustrator CS6 64-bit dvaui.dll and msvcr100.dll crashing problem, any solution?

    First things first, trying to find a tech support Email address or phone number has been infuriating.  The "3-step support wizard" which results in "go to the forums" is also infuriating and insulting. I have a Windows 7 64-bit PC running CS6 64-bit

  • Recommended battery use

    hi, i'm trying to make sure my battery life remains as effective as possible. i've read articles that mention doing a drain once a month or so, and i've been doing that. but one thing i'm curious about is whether or not it's best to have your compute

  • 2nd MBA. Same ******* problem! Overheats!!!!!!!!!!

    OK this is annoying as ****, I recently got my MBA replaced but it still gets way too hot and to top that my mouse pad got crazy at random. Anyone know what should I do? I'm in no mood to get it replaced again. Tried Coolbook but that thing is useles

  • How to transfer old library to new computer

    I was wondering if there was a way to tranfer your whole library (including the ones that you didn't but off iTunes such as old CD's etc) from an older computer to a newer one without loosing them all?