Links in Reports Not Showing Correct Data
Good Afternoon!
I've recently found that the links in some reports are not working as they should. Below is an example from a report I just tried:
Example
I ran the report "Count of all instances of specific software registered with Add or Remove Programs" and selected a specific Collection I had created. The report ran as it should and displayed a list of all software titles and versions for all of
the collection's workstations combined.
One application has 5 different versions installed amongst the collection and I need a list of them. Each of the 5 versions was listed and each had a link. When clicking on the link, though,
it showed a list of "all systems" workstations which had the application / version - not just the number of or machines from the collection the report was run on. Long story short, the report displayed about
11 machines, but clicking on the link showed a list of about 40.
I don't know if this is by design, but it's really difficult to work with. I am having to make individual queries for the data which takes much longer. Is there a resolution to this?
Thank You!
Ben K.
Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
Yes this is be design however you can modify the "Computers with specific software registered in Add Remove Programs" report and have it filter on both the SW title and collection.
http://www.enhansoft.com/
Similar Messages
-
Siebel BIP report not show correct data when current view=my programs view
Dear All,
I have report that contain field approval,
which is when i login as 'SASKIA' as example then i want to print report budget request,
this report contain field approval like :
Employee Login
HOKIONO
BAMBANG
PONGKY
SASKIA
but when i print the report it just show:
Employee Login
SASKIA
and it happened only if i print report in 'MY Programs' view,
the report show ok in 'All Programs' view.
and when checked in siebel tools, IO Program Container(that used in report), the link already set to all.
Please help me on this.
Best regards
Ceciliatry adding a user property to your integration object:
User Property Name: "ViewMode"
User Property Value: "All"
see if it has any effect - for me it solved some issues with data not being displayed!
Benny -
Discoverer Viewer not showing correct data when scheduled
Hi All,
I have a bit of an ongoing issue and cannot find an answer through Oracle.
We have an issue that when a cross-tab workbook is run manually in Desktop this returns correct data, when scheduled in desktop it returns correct data in desktop, but when opening the scheduled workbook in viewer, incorrect and irrelevant data is returned
Here is a little information on the field that is not returning correct data;
The field is based on a calculation, the calculation (lets call BOB) contains PL/SQL function concatenated with an NVL calculation, this other calculation is a DECODE. I have been playing with changing the content of the BOB calculation, by removing the PL/SQL function and the DECODE calc from BOB and scheduling the report, the data is returned in viewer, in fact i've attempted one without the other and this still does not return the correct data.
This version of discoverer that is not returning data is V 10.1.2.50.05. I've tested this on a later environment with Discoverer V 10.1.55.26 and the data is returning correctly through the sceduled report in viewer.
My questions;
1. Has anyone ever come across something similar to this in version 10.1.2.50.05
2. Is there any detail available regarding what upgrading to 10.1.55.26 offers?
3. Know any workaround for using PL/SQL calculations in a scheduled workbook? I am aware that not aggregable items will not be returned in v11 when scheduling workbooks.
Many thanks in advance for any help.
SimonBumping this thread
Thanks
Si -
Discoverer Report opened from Portal does not show correct data
Hi,
When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
Does anyone know what the reason could be for this?
Thank you,
SantoshiI assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
Generally you specify the refresh time to be sometime after your usual database load completes. -
Report not picking correct data
Is it possible for vendor aging report to dispaly for Particular Vendor the
amount ( bsik-dmbtr ) using Purchase organization field.
There are two Purchase Organizations C100 ( for CPU ) and D100 ( for Monitor ) in my case.
data is picked from bsik , lfm1 ,lfa1 tables.
Example : if D100 is for Monitor-screen and has amount 1000.
c100 is for CPU and has amount 2000.
In that case report with Vendor , comp code, Pur. Orga and period should disply
c100 amount 2000.
D100 amount 1000.
my report is showing that vendor is existing for C100 or D100.
but for vendor that exist in both C100 and D100. ( Say vendor number 200 )
the amount is coming for vendor number 200 in c100 and d100 equal to 1000.
but it should come c100 = 2000
and for d100 = 1000.hi
I am not sure about this point in vendor aging report. i have added a pur Organization field in this report.
I am asking
If vendor no 123 is in D100 and C100 ( D100 and C100 are Pur Organizations )
Initially no transaction is there.
Suppose vendor no 123 created a Puchase Order of 500 /- using D100 Purchase Organization in duration 01.01.2008
to 01.01.2009
But vendor no 123 in Purchase Organization C100 has no transaction.
Then 123 with D100 is sould show 500/-
and 123 with C100 is 0 /-.
output of this report should show above results ?
If output is like this then how to rectify my report ?
Or it shoud show the result like this
Then 123 with D100 is sould show 500/-
and 123 with C100 is 500 /-
My output is showing like above same
Thanks -
LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider
Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini KumarDepends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers. -
Export to PDF from Infoview does not show correct data - CRS 2008
I have a problem where users attempt to export a report from the Infoview interface to a PDF. The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values. To troubleshoot, I have tried this on different clients - without a change in the result. I have also pulled the latest instance of the report from this history on the Central Management Console. Interestingly enough, the same thing happens when I export to a PDF from there as well. Any insight or help would be greatly appreciated. Thanks!
Hello,
I can't tell you offhand on what the issue is here, as various factors come into play.
Here are a few troubleshooting steps you can try:
- Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
- Instead of viewing the report and export; schedule a report to PDF and check the results.
- there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
Regards,
Duncan -
Crystal report not showing correctly in firefox after windows update
From the past six months, crystal reports has been displayed without the print toolbar and the formatting is completely lost in firefox. Previously we found that when we uninstall the windows updates KB2836942, KB2836943, KB2836946, KB2836947, the problem is resolved. But with more and more windows updates that are automatically updated on the servers, it is getting practically impossible to track which windows update creates the problem. There is absolutely no issue in Chrome, IE and Opera; it is only with firefox that this problem occurs; so we feel it is more of a firefox issue than a windows update problem. It is not just in one machine, but we found the same issue at all our customer's servers (more than 10). The servers are a mix of windows 2008, windows 2012 with iis 7. We also observed the same problem on windows 7 machines. We have been recommending firefox as the best browser for our software to all our customers, and with this problem cropping up, we are badly handicapped. Kindly let us know how to sort this issue. We have provided the link below for your perusal. When you open it in chrome it works fine, but on firefox it does not display correctly:
http://54.209.141.3/Reports/Report.aspx?reportname=RptProductWiseSalesDetails.rpt¶mlist=@FromDat,01/01/2011;@ToDat,01/26/2014;@BranchSlno,1;@FranchiseSlno,1;@FirstCol,B;@DateType,B;@SaleChannel,A;@ProductTypeSlno,0;@ProductSlno,6;@ColorSlno,0;@FinancierSlno,0;@ChannelTypeSlno,0;@ChannelSlno,0;@SalesPersonSlno,0;@SaleStatus,L;@BillingType,A;@LoginUser,admin;@LoginBranch,Keerthi%20Triumph%20Bangalore;@Franchise,Triumph;@AddCustomerDetail,0;@SaleCodeSuffix,&loadfromsql=0Those four updates all relate to the .Net framework, and involve how an ASP.Net application recognizes different browsers.
* http://support.microsoft.com/kb/2836942
* http://support.microsoft.com/kb/2836943
* http://support.microsoft.com/kb/2836946
* http://support.microsoft.com/kb/2836947
Each contains this Note:
<blockquote>There is a configuration switch to be used to revert back to the old behavior: <br>
<pre><appSettings>
<add key="aspnet:UseLegacyBrowserCaps" value="true" />
</appSettings></pre>
</blockquote>
I think the downside of turning off the changes is that IE 11 will not be well supported.
That's all I know so far... -
Purchase requisition report not showing any data R12.04
when i run "Printed Requisitions Report". Report run without any information.
EBS R12.04Please refer to Note: 472332.1 - R12: Printed Requisition Report Ends With "No Data Found"
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472332.1 -
Report not showing correct results
I am new to SSRS. Using SQL 2008, Visual Studio 2010 shell.
I have a stored procedure that when I execute it through SSMS, it returns the correct results. However, when my report runs through SSRS (using the same stored procedure). I get inconsistent results.
I've been able to narrow it down to a specific parameter in my report where I pass in Id's. This particular parameter gets its values from a query and is setup to use multiple values. I have focused on two ID's which together are giving
me problems.
The IDs are !'" and
!!T.
When I ONLY select !'" the report returns the correct results.
When I ONLY select !!T the report return the correct results.
When I select !'" and !!T the report only return the results for !!T.
I have no clue why SSRS doesn't like this. Any help would be appreciated.
jhoopI created the specific function referenced in your link and it didn't help.
Function
CREATE FUNCTION [dbo].[c__SplitValues]
-- Add the parameters for the function here
@List nvarchar(2000)
,@SplitOn nvarchar(2000)
RETURNS
@RtnValue TABLE
-- Add the column definitions for the TABLE variable here
Id int identity(1,1)
,Value nvarchar(100)
AS
BEGIN
-- Fill the table variable with the rows for your result set
While(CHARINDEX(@SplitOn, @List) > 0)
BEGIN
INSERT INTO @RtnValue (value)
SELECT
VALUE = LTRIM(RTRIM(SUBSTRING(@List, 1, CHARINDEX(@SplitOn, @List) - 1)))
SET @List = SUBSTRING(@List, CHARINDEX(@SplitOn, @List) + LEN(@SplitOn), LEN(@List))
END
INSERT INTO @RtnValue (Value)
SELECT Value = LTRIM(RTRIM(@List))
RETURN
END
The line in my SQL statement where I use this function
AND TableName.UserId IN (SELECT Value FROM dbo.c__SplitValues(@UserId,','))
jhoop -
DCH Report not showing what Data collection Value at Particular Operation
Hello,
I need one help regarding the DCH that is Device History Report, I am doing data collection at particular operation but when I look at DCH I can see all the Operation to that SFC but I canu2019t drill down to look what data I had enter as a part of Data collection.
Regards
SuhasHello Suhas,
Please make sure that you have configured Device History tab in User Preferences Maintenance.
Regards,
Alex. -
Report License 01A not showing correct data
I have recently installed SCCM 2007 and have a good number of machines with agents installed.
When I run the above report, I get no Office 2003 numbers (though, I know it is installed on most of the machines). I instead get Office 2007 listed. Is it possible that SCCM is reading a key that is for 2007 but we have 2003 installed instead?
Also, in the same report, I am getting 30+ Windows 2008 servers, when we do not have any installed at that location
Any thoughts?Yes, I know this is an old post, I’m trying to clean them up.
There are a number of Post SP2 AI fixes, I would suggest installed them and seeing if that fixes the problem, if not then you need to contact CSS directly for support as they are the only one that can fix this problem.
http://www.enhansoft.com/ -
SharePoint 2010 Site Web Analytics - Top Pages report not showing complete data
Hi,
I have a custom page in a team site which takes list ID as an argument and shows the relevant data e.g.
../Dashboards/View%20Briefing.aspx?BriefingID=1078
../Dashboards/View%20Briefing.aspx?BriefingID=1079 etc
When i look at the Top Pages report under Site Web Analytics all i can see is data for:
/dashboards/view briefing.aspx
I need stats for individual list items i.e. how many time BreifingID 1078 was viewed etc. Is it possible to achieve this using OOTB reports or can i write a custom report to achieve this? If yes then how...
Any help would be appreciated.
Regards,
KashifYou’re dynamically filtering content on a single page with values on the query string. Your users are still only hitting one page (View%20Briefing.aspx). Analytics only sees that 'View%20Briefing.aspx' is being hit; it won’t record stats for what’s specified
on the query string.
I expect you could pull this data out of your IIS logs using log parser. Some links on this subject:
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=85
http://blogs.technet.com/b/corybu/archive/2008/02/26/sharepoint-iis-traffic-analysis.aspx
http://social.technet.microsoft.com/wiki/contents/articles/16072.sharepoint-2010-create-analytic-reports-using-logparser-and-powershell.aspx
http://blogs.msdn.com/b/carlosag/archive/2010/03/25/analyze-your-iis-log-files-favorite-log-parser-queries.aspx
http://logparserplus.com/Examples -
Query on multiprovider not showing correct data
Hello Gurus,
I have to display 3 keyfigures in my report.
Each key fig comes from different data targets.So I have used a multiprovider for it.
The key figs are namely
1)Actual sales value 2)forecasted value and 3)Annual target and are in one structure .
the first and second keyfigure shows data 0calmonth wise(when drill across) which is correct.
The third key figure should be displayed only at the end .But right now the third key figure column is seen
in each column when drill down monthwise.
Is there any way bu which I can only show the values of 'Annual Target'at the end.
Please suggest on this.Hi,
You can try using Cell Definition in BEX, try to search on SDN and you will find the step by step instructions of doing the same.
Regards,
Arminder -
Usage Tracking not showing correct data.
We have configured usage tracking in our project.while creating a report with(Subject Area,Query,Request ) it shows the dashboard filter query of all subject area in a particular subject area.
Eg : If Subjuct area SA1 has a dashboard prompt query "@@@@' ,and Subjuct area SA2 has dashboard prompt query "$$$$$' ,both the querys are shown in Subjuct area SA3 in the usage tracking reports.Hello,
We implemented usage tracking too
Make sure you are not running into the following BUG pre-10.1.3.4.1:
BUG 7233756 - USAGE TRACKING DOESN'T CAPTURE AD-HOC REPORTS CORRECTLY
We found this issue and verified it was resolved in 10.1.3.4.1.this problem is still there, and we are getting value of random subject are populated for drill down queries. is there any bug for this too?
Maybe you are looking for
-
[SOLVED] Installed Scilab, can't use Xcos
Hello. I have installed Scilab with a regular pacman -S. I can start Scilab and use its main functions. But when I try to use Xcos, I get this message: Scilab wrote:java.lang.UnsatisfiedLinkError: /usr/lib/libjhdf5.so: libhdf5.so.6: no se puede abrir
-
IPhone bluetooth lowering volume and fans even when not getting a call
Have a friend where when he gets into his car, his phone is even turning the radio volume down and lowering the fan speed even when he doesn't get a call, so he has to keep turning bluetooth or his phone off so it won't mess with that stuff. Before
-
Unable to Uninstall Photoshop CS4 and Dreamweaver CS4
it's been a couple of days since i tried out Photoshop CS4 and Dreamweaver CS4 to see how they compare to the CS3 versions, it worked fine and all till suddenly it stopped working, so i been trying to uninstall/reinstall to get it working under the f
-
I received a document from a client to work on that was created in InDesign with english format. For some reason, when they sent it to me the bullets were converted to arabic format, so they are on the left side not right. Is there an easy way to con
-
How do I color a grayscale TIF file?
I remember it being easy to do in Quark... But now I can't get it done in ID (CS6).... The TIF file is not transparent (all layers flattened). I tried searching, but still don't have an answer.... Thanks.......