Links to documents behave differently (ie11)

I have an excel sheet , sheet.xlsx, in a sharepoint 2010 library,
http://sharepoint, which is in trusted sites.
I have an IE (11) favorite for that excel sheet.
I have a desktop shortcut.url
if I browse to http://sharepoint/library/AllItems.aspx, and click on the link for sheet.xlsx, Excel opens sheet.xls.
if I click on the IE favorite for sheet.xlsx, I get the little yellow bar at the bottom of the screen asking me if I want to open it.
if I click on the desktop shortcut for sheet.xls, I get the big white "View Downloads - Internet Explorer" pop-up window asking if I want to open it.
I want all three of these methods to just open excel.  this is not just with excel documents, i'm only using it as an example. I assume this is a security setting in IE somewhere, but i'm looking at the GPO settings for my trusted sites zone, and nothing
is set to "prompt." every setting is specifically enabled or disabled. I also find it curious that the behavior is different depending on how I open the document.
i'll also mention that the users experiencing this issue were upgraded from ie8 to ie11 this week, and did not see this behavior in ie8 (which is why they are complaining about it now). the same IE security GPO was being applied to the users when they had
IE8 that's being applied now that they have ie11.

Hi,
For your issue, you need to add some identification in front of the original address:
For Excel file:
ms-excel:ofv|u|http://sharepoint/Shared%20Documents/Sales.xlsx
For Word file:
ms-word:ofv|u|http://sharepoint/Shared%20Documents/Sales.docx
For PowerPoint file:
ms-powerpoint:ofv|u|http://sharepoint/Shared%20Documents/Sales.pptx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Similar Messages

  • Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

    Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
    When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
    I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • How can I have a topic name different than the filename of a linked Word document?

    I've encountered multiple issues with linking to Word files ...here's another one: If a Word document is entitled Feature_ABC, then upon generating the HTM after linking it, the HTM's filename and topic name are both Feature_ABC. As underscores are ugly in topic names and features can be renamed, I would hope that I could rename the topic to be different than the filename.
    The Help documentation suggests this is possible by editing the Topic Name Pattern in the Word Conversion Settings dialog of Project Settings. However, reagardless of the Pattern entered, every time I generate or update from the context menu of a linked Word document the topic name remains the same as the filename.
    Because the topic name is shown in the Search panel and browser tabs, it will be a little ugly and may even be confusing. It is possible to edit the HTML directly, but then the HTML is overwritten each time the Word documents are update and the great advantage of using linked documents is lost.
    Is there a way to solve this problem?
    Thanks in advance for any help you might be able to provide.

    Thank you for your quick reply - just checked Multifox out.
    It seems it still forces me to open a new window, while preventing the need for a new profile.
    Why isn't it in the addons.mozilla.org ? Looks dangerous ...

  • Link to DOcument (PDF)

    Hi
    In the WEBI user guide it appears as though it is possible to link to PDF documents.
    "Document cells can be defined as hyperlinks. Hyperlinks in cells are similar to the hyperlinks found on
    the World Wide Web that allow you to open a different web page from the page you are currently viewing.
    When you click a cell that contains a hyperlink, the target document specified in the link opens. The
    target document can be another Web Intelligence document, a site on the world wide web, a PDF,
    Excel or Word document, or any resource accessible through a hyperlink."
    When we attempt to link to a document as follows:
    1. Right-click the cell where you want to create the link and select Linking > Add Document Link
    from the menu to display the "Create Hyperlink" dialog box.
    2. Select the Link to a document tab.
    3. Click Browse and select the target document in the Choose Document dialog box
    When we Browse to the relevant folder the PDF documents do not display, only Webi documents display.
    Is it possible to add PDF documents using the above mentioned functionality?
    Thanks
    Ian
    Web Intelligence Version 14.0.2
    Edited by: Ian Carbonel on Dec 15, 2011 12:50 PM

    Thanks pumpaction,
    My formula that launches a pdf document from a folder in the folder structure reads as follows:
    /opendoc/openDocument.jsp?iDocID=AficloALXE5PimxTtxjwdTw&sIDType=CUID&sType=pdf\" title=\"\" target=\"_blank\" nav=\"doc\">Report Info</a>"
    The document ID was found on the document properties.
    Cheers
    Ian
    Edited by: Ian Carbonel on Dec 19, 2011 8:31 AM

  • Pdf duplication in Preview for Mac behaving differently

    When duplicating a PDF in Preview for Mac, a new image window would open that I could click on to select, then rename and save elsewhere. Just recently, seems like in the last few days, Preview now behaves differently. Now when I select duplicate, a duplicate document is created in the same window but shows as a thumbnail in the sidebar. This is confusing as it appears that Preview is trying to create a duplicate of the document at the end of the original. I don't appear to have received any updates from Apple that would account for this sudden change in behaviour (shows Preview last modified 18th November). I don't appear to be able to change this in Preview's Preferences. Can I revert Preview to the previous behaviour? (I'm using latest version of Preview in Yosemite on a 24" iMac).

    I always find that Preview can garble certain graphic elements or even slightly alter the over-all color of the PDF. However, I also find it is a lot quicker to deal with PDFs, especially when it comes to printing. Sometimes I get a PDF that I send to print on our Canon copier and I end up canceling the print job after 10-15 minutes because it's still processing. I open that same PDF in Preview and it prints in less than a minute. The same can be said of InDesign so on certain jobs I end up exporting as a PDF and printing from Preview. This might say a lot about Adobe's Printing Engine... (sorry, off-topic)

  • Why Reports format behaves different in Excel and browser(if desformat=html or pdf)?

    1-Why Reports format behaves different in Excel and browser(if desformat=html or pdf)?
    2-I made three queries Q1,Q2 & Q3 and linked them with proper field links but suppose Q3 returns no records for some Q1&Q2 records & when the report runs for delimited options it reflects only those records as output for which all the queries return records(if Q3 returns no record then the related records from queries Q1,Q2 don't reflect) while the output in desformat=html or pdf is ok..
    can you please resolve my problems
    ( I have installed patch 5a in my report server machine)
    Thanks & Regds.
    Suneel
    null

    What do you mean by "different"? (In our
    experience, Oracle html output has too many
    columns, which are not visible in the
    browser but are obvious in Excel.)
    We build our own html programmatically, so
    that Excel matches the browser more closely.
    -- Allan Plumb

  • Can I apply one .css stylesheet to all of my linked word documents inside my RoboHelp8 HTML project?

    Hello all,
    I am on my fourthRoboHelp8 HTML project, after the other three crashed. I am a technical writer constructing my companies Policy and Procedures Guide. I am only 142 (word documents) and 9 (RoboHelp topics) into my project and there will be plenty more to come. I recently took Kevin Siegel's RoboHelp8 class where I determined that it would be best if I link all of my word documents inside of the Project Manager becuase I will be constantly updating these documents. I've searched around the Adobe Forums, talked to Kevin, and talked to my IT Department, but I cannot seem to find an answer for my problem.
    I have linked all of 142 word documents inside of the Project Manager, and all 142 word documents have their own .css stylesheet. I have assigned the default.css stylesheet (which I have assigned all of the proper formatting to headings 1-4 to match headings 1-4 inside of my Microsoft Word 2007 documents) under Project Settings under the Import tab. I also assigned this default.css stylesheet under WebHelp Pro. My understanding with applying the default.css stylesheet to these two places is that all of my word documents and topics should have this stylesheet applied to them.
    However, when I look at each individual linked word document the default stylesheet has not been assigned and the word document is still being dictated by its own stylesheet i.e. Credit.css. On my third project, before it crashed, I manually went through all 142 word documents in the Project Manager and assigned the default.css stylesheet to them. I did this by right clicking on the topic, under Appearance, I changed the stylesheet i.e. Credit.css to default.css and clicked apply. I was immediately prompted with the two options: "Preserve modifications to this file" or "Don't show me this message again." I tried both options. The first applied the default.css stylesheet and removed the Credit.css stylesheet, but when I made a change inside of my word document and updated it inside of the Project Manager none of my changes appeared. The second did not apply the default.css stylesheet and kept my Credit.css stylesheet applied to my word document. When I made a change inside of my word document and updated it inside of the Project Manager the change appeared.
    I talked about this to Kevin and he said that the individual stylesheet applied to each linked word document did not mean anything, essentially that by making the default.css stylesheet the dominant stylesheet under Project Settings under Import that the stylesheet would be applied to all of my linked word documents/topics. He also suggested that I make a change to the stylesheet like change the color of Heading 1 and link a new word document to see if it applied the changes. I tried doing this inside of my third project, but nothing changed.
    I would like to know if I can assign one stylesheet to all of my linked word documents before I get too far into the fourth project and have that project crash on me too. One of RoboHelp's appealing features is to apply one stylesheet to multiple topics, or in my case 142 word documents and 9 topics. I hope that I can apply one stylesheet to all of these linked word documents because having 142 individual stylesheets is unmanageable.
    Any help or suggestions would be greatly appreciated.
    Thank you,
    Roxxanne

    When a word document is imported into RoboHelp project, RoboHelp generates a separate stylesheet for each word document as each word document may have its own formatting styles. In a generic scenario, word documents may be brought from different sources and may have different styling. Hence, RoboHelp allows users to preserve different styling through sepearate stylesheets.
    However, for a different scenario like yours, RoboHelp allows users to override all the CSS and apply a single CSS to all the topics at the generation of output. As you have already mentioned that you have applied default.css in the WebHelp Pro SSL dialog, that should suffice and should meet your requirement of applying a single CSS to all the topics. You can verify the same at your end by linking few word files and generating the output with a single CSS applied in the SSL settings.
    Mayank

  • Linking two documents in deski

    Hello Experts
        I am new to BO i am trying to link two documents in Deski But i am facing some problem.Can anyone explain me what are steps we need to do for linking two documents.
    Regards,
    Shanmugam

    Hi,
    Following information might be helpful in resolving your query.
    When  link Report1 to Report 2 (universe1.column = universe2.column) so that Report 1 displays only those rows having the Office Number in Report2.
    Cause
    Report pulling data from different universes with different dadabases.
    Resolution
    To get this data by editing the query in the querypannel with  "Select Query Results" operand ,place the universe2.column in condition pane and run the report the we can get correct results from different universe with different databases.
    Regards,
    Sarbhjeet Kaur

  • Archivelink using IXOS - linking image document to business document

    Hi all,
    We are trying to link trip document (BUS2089) with image document of trip receipts in the Travel & Expenses workflow in HR.
    The scanning of paper receipts is done by the IXOS server. The archivelinking is done using late storage using barcodes.
    My question is when the scanning is done and the link is established between the trip document and the image document, is the event "assigned" of business object type "BARCODE" triggered.
    I want to use this event in "wait for event" step in the workflow.

    Hi Kiran
    Not sure about two differnt system but on the same system same image can be linked to two different SAP documents vai function module ARCHIV_CONNECTION_INSERT. Field assignment: tick upper/lower case; archiv_id / arc_doc_id (ixos image address), ar_date, ar_object fileds to be assigned with TOA01 data for the image associagted with SAP document that is already linked. Fields mandant, object_id, sap_object, doc_type to be assigned with 2nd SAP document as it should appear in table TOA01.
    Hope this helps.
    Regards, Deepak

  • Linking word documents and auto-updating TOCs?

    Hi, all!
    I know InDesign a bit, but am about to embark on a project that I could use some help on. Im compiling all the different writing Ive done in the past four years into a little ebook. There are about 50 different essays/articles, each under four categories in the table of contents. Many need editing, and the ebook will require lots of moving things around and editing.
    So, is it possible to link Word documents like as you can do with images? I would like to have InDesign link to all the different word documents that comprise different essays, etc, so I can edit individual essays from Word and have them auto-update within InDesign. Also, is there a similar thing I can do with the table of contents, where it will automatically update the page number of a given entry when I rearrange it? These two things would save me much time!
    Thank you!
    Alec

    As much as you think you want to auto-update the Word documents, you don't.
    Yes, there is a way to link those Word files, but you will lose all formatting applied in ID each time you do update the linked files.
    Why don't you just make those changes in InDesign?
    Next, yes, you can create a TOC that will update page numbers automatically when the document(s) change.
    That is no problem.

  • Link between documents and update the version

    Hi
    I have linked documents between different sites in Sharepoint. When I change the contain in the main documents and the Version is change from 1.0 to Version 2.0. Now the version for the linked document is still Version 1.0 in the document
    list. How can I manage that the linked document shows the same Version number as the main document when it is updated?  

    Hi
    I copy the shortcut to the main document and add New document (link to a document) in a different folder than main documents.
    It is the documents version number as you can see in the Version history. Hope that is answer to your question.  

  • Mac and iPhone4 contact searches behave differently

    I have ~1000 contacts. One of them has an email address beginning with "c.s". Searching my mac address book for "c.s" narrows it down to that one contact. Searching iPhone contact for "c.s" gives a list of dozens of names that start with "c" and "s". Is it treating the period as a wild card?
    Related search problem: one of my contacts' email addresses starts with "diz". Searching my mac address book for "diz" narrows it down to that one contact. Searching iPhone contacts for "diz" yields nothing.
    Why do the mac and iPhone searches behave differently?

    "Powerpoint in fact is unable to play any video files, it can only play still images and sound files, as only these files can be embedded."
    The mac version CAN play videos inside PPT right on a slide. They are linked, but they still play ON the slide. Basically anything the QT player can play, ppt can play right on the slide. I assumed PPT for windows could do this with formats OTHER than QT.
    You're saying that NO VIDEO FORMAT IN EXISTANCE can play ON a slide in PPT for windows? I find that hard to believe.
    I've seen many folks post here suggesting AVI works just fine and can be played right on the slide in PPT for Windows. Mpeg1 is normally 320x240 and well, honestly it looks like crap on a 1024x768 screen (and most people these days do NOT want to show a 320x240 movie at regular size on a large slide), so I stand by my comments made previously, unless someone can post that they tested an AVI and PTT for windows actually bumps you OUT of ppt and into a player (full screen or not). I just can't imagine that's what it's doing. QT on the other hand, is pretty much broken except in the way you described, playing it in the QT player, which is why no one wants to do that.

  • Need Link or Document for MSS

    Hi all,
    I need to work on MSS. please help me by sending the  link or document for MSS.
    Thanks
    sumitra

    MSS config http://help.sap.com/Business_Packages/EN/0b/c26b1be7700043b17cba4334a4b58c/frameset.htm
    ESS SCREEN ELEMENTS:
    DEFINE HEADERS:
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => HOME PAGE FOR SELF-SERVICE => HEADERS AND AREA GROUP PAGES => DEFINE HEADERS
    DEFINE AREA GROUP PAGES:
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => HOME PAGE FOR SELF-SERVICE => HEADERS AND AREA GROUP PAGES => DEFINE AREA GROUP PAGES
    DEFINE AREAS:
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => HOME PAGE FOR SELF-SERVICE => AREAS => DEFINE AREAS
    DEFINE SERVICES:
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => HOME PAGE FOR SELF-SERVICE => SERVICES => DEFINE SERVICES
    INFOTYPE VIEW INDICATOR:
    Service Specific Settings :Maintain feature
    SAP EASY ACCESS => PE03 => IVWID
    Define Roles - Subtypes and Application Data are defined here. SAP Customizing Implementation Guide (IMG) -> Personnel Management > Employee Self-Service -> General Settings -> Service- Specific Settings -> Own Data -> Define Active Subtypes and Application case
    DEFINE ACTIVE SUBTYPES AND APPLICATION CASE
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => OWN DATA => DEFINE ACTIVE SUBTYPES AND APPLICATION CASE
    CREATE RULE GROUP (Configuration steps for Time Management)
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME => LEAVE REQUEST => PROCESSING PROCESSES => CREATE RULE GROUPS
    In Leave request create Rule group - V_HRWEB_RULE_GRP
    ADJUST WEBMO FEATURE
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME => LEAVE REQUEST => PROCESSING PROCESSES=> CREATE RULE GROUPS
    "Feature is used in Customizing for the Web application to store different regulations for employee groups. We can store regulations to display Data"
    Assign workflow template to each Leave type - where WF ID for new request WF ID for cancellation request and WF ID for Change request are given here. SAP Customizing Implementation Guide (IMG) -> Personnel ManagementàEmployee Self-Service -> Service- Specific Settings -> Working Time -> Leave Request -> Processing Processes -> Specify Processing Processes for types of Leave -> Define Absences/Processing process
    Specify how leave is displayed and default values:SAP Customizing Implementation Guide (IMG) -> Personnel Management -> Employee Self-Service -> Service- Specific Settings -> Working Time -> Leave Request -> Lay out of web application -> Specify how Leave is displayed and default values
    DEFINE PROCESSING TO EACH RULE GROUP
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME => LEAVE REQUEST=> PROCESSING PROCESSES => DEFINE PROCESSING PROCESS FOR EACH RULE GROUP
    PROCESSESS FOR TYPES OF LEAVES
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS = > SERVICE SPECIFIC SETTINGS => WORKING TIME LEAVE REQUEST => PROCESSING PROCESSES => SPECIFY PROCESSING => PROCESSES FOR TYPES OF LEAVES
    QUOTA OVERVIEW / TIME ACCOUNTS
    CREATE RULE GROUP
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME ACCOUNTS => CREATE RULE GROUP
    MAINTAIN WEBMO FEATURE
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME ACCOUNTS => CREATE RULE GROUP
    SPECIFY DISPLAY OF ABSENCE QUOTAS
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME
    TIME ACCOUNTS => SPECIFY DISPLAY OF ABSENCE QUOTAS
    SPECIFY THE CALCULATION OF REMAINING LEAVES
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME
    TIME ACCOUNTS => SPECIFY CALCULATION OF REMAINING LEAVE
    DETERMINE LAST DAY OF THE WEEK
    Maintain LDAWY feature (To maintain Last day of the working day)
    SAP EASY ACCESS => PE03 => LDAYW
    SETUP DATA ENTRY PROFILES
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME => RECORD WORKING TIME => SETUP DATA ENTRY PROFILES
    Display view of CATS entry profile:SAP Customizing Implementation Guide (IMG) -> Personnel Management -> Employee Self-Service -> Service- Specific Settings -> Working Time -> Record Working Time -> Define Field Selection and select Data entry selection
    SELECT ALLOWED ABSENCE TYPES
    (Here we define the absence types that the employees are allowed to enter in CATS Regular. To do this, deactivate all absence types that are only to be processed by the clerk in the SAP system.)
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME=>RECORD WORKING TIME => SELECT ALLOWED ABSENCE TYPES
    TIME STATEMENT
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC SETTINGS => WORKING TIME => TIME STATEMENT => ENTER NAME OF HR FORM FOR THE => TIME STATEMENT
    TEAM CALLENDAR
    SPECIFY ABSENCES TO BE DISPLAYED
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC => SETTINGS => WORKING TIME => TEAM CALENDAR => SPECIFY ABSENCE TO BE DISPLAYED
    Assign Processing processes to each leave type:SAP Customizing Implementation Guide (IMG) -> Personnel Management-> Employee Self-Service -> Service- Specific Settings -> Working Time -> Team Calendar -> Specify Absences to be Displayed u2192 Define Absences/Processing Process
    SPECIFY COLOUR DISPLAY FOR EACH ABSENCE
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC => SETTINGS => WORKING TIME => TEAM CALENDAR => SPECIFY ABSENCE TO BE DISPLAYED
    SELECT EMPLOYEES TO THE TEAM CALLENDAR
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC => SETTINGS => WORKING TIME => TEAM CALENDAR => SELECT EMPLOYEES
    DEFINE LAYOUT OF TEAM CALLENDAR
    SAP IMG => PERSONNEL MANAGEMENT => EMPLOYEE SELF SERVICE => GENERAL SETTINGS => SERVICE SPECIFIC => SETTINGS => WORKING TIME => TEAM CALENDAR => DEFINE LAYOUT OF TEAM CALENDAR
    Creating User ID's for ESS: Through TCODE SU01 define the user name.Assign User through Communication Infotype(0105)
    MSS config http://help.sap.com/Business_Packages/EN/0b/c26b1be7700043b17cba4334a4b58c/frameset.htm[http://saphrexpert.blogspot.com/search/label/ESS]
    Edited by: SajKhan on Jun 1, 2009 11:01 AM
    Edited by: SajKhan on Jun 1, 2009 11:02 AM

  • How to link a document in Framework

    In CWB Home Page there is ability to link to various URL.
    I know how to link to a Portal. But I need to link to a Document (Word or PPT) which is located in Shared Servers.
    If this is possible , How do I write the full Path which includes the document?

    Hi,
    I am not sure whether I understood your requirement clearly.
    If you just want to link a document to your service desk message, you can easily attach the document to the "attchmnt" tab of the "notif_create" transaction, if you are using "notif_create" to create your service desk message.
    (ii) If you are using "crm_dno_monitor" transaction, then you can upload the document in the "documents" tab of this transaction.
    (iii) But, if your requirement is that that you have to upload the document in the Solar01/Solar02 transaction and only have to link to your service desk message, then you can generate the URL of the uploaded document and attach it using the "My Network Places" button of the "Open File" dialog (that comes up by clicking the "export" button of the "attchmnt" tab of the "notif_create" transaction) and specifying the URL in the "File Name" field.
    (iv) If the requirement is the same as in (iii), but if you use "crm_dno_monitor" transaction, the same procedure can be followed in the "documents" tab of this transaction or else we can also use the "create URL" button of the documents tab.
    Hope you know the procedure for generating the URL of the uploaded document.
    Dont forget to reward for useful answers.
    Best regards,
    Alagammai.

  • PDF export with link to document defaulting to "Open a web link" instead of "Open a file"

    I have a MS Access database and I'm trying to export reports to PDF (I have Acrobat XI Pro) that include a hyperlink to another document on the same drive on my computer.  I have tested this with hyperlinked email addresses, and emails export fine to PDF and are still functional, opening a new email in Outlook.  The hyperlinks to documents work fine in MS Access, opening a Word, PDF, or other document when clicked.
    When I export to PDF, the links to documents say, "This document is trying to connect to: file:" and my filepath.  If I say "Allow," the link tries to open in my default web browser, which comes up blank.  I've tested this on other computers in our office too.  When I right-click the link, I have the option to "Open weblink as a new document" -- this opens the document successfully, but won't be very helpful or fast for our staff.  When I examine the link with Tools - Add or Edit Link, I see that the link's action defaulted to "Open a web link" when the PDF was created.  This seems like it should be "Open a file."  To see if "Open a file" would work in theory, I tried creating a test button in a blank PDF and made the "mouse up" action "Open a file" and linked to various documents on my computer.  Each time, the button does not react to being clicked at all, like nothing happened.
    I also tried making a basic Word doc with just the hyperlink to another document.  It works fine in Word, but, when saved as a PDF, the hyperlink does the same behavior-- tries to connect to the web instead of opening the file on the computer.
    I have a lot of experience building Acrobat PDF forms and working in Acrobat, and I'm almost certain I've created links that open another file on the computer in Acrobat before, but I'm out of ideas and an internet search isn't turning up much.  I welcome any suggestions for things to try.  Thank you!

    This is what I currently have, and it attempts to open in a web browser.  Do you know of a setting in Acrobat I might need to change, or any other solution to tell Acrobat to open the "file:" URL as a document, not try to start the web browser?

Maybe you are looking for

  • HT1391 Purchased items - icloud downloads to hard drive

    I have a new MacBook Air and have just purchased my first movie since having this Mac.  The purchase has gone to icloud only it seems and I can't find how to download it to my itunes library on my hard drive.  Have tried "check for available download

  • Changing PO vendor in ME22N.

    Hi all, As per some of older threads it is not possible to change a vendor once the PO has been created. But in our case we can change the vendor via me22n. click in the vendor field.F4.alternate payee.Enter a new vendor. The vendor changes. I want t

  • Creating sandboxes with the admin api

    I'm trying to write some code that creates sandboxes through the admin api. For these sandboxes, I want to only enable a specific set of functions. Unfortunately, when you create a sandbox with getSecuritySandboxes, it enables all functions by defaul

  • Order 23 is not a capital investment measure for Asset accounting(AUC)

    Dear All, Help This Error For T Code  Ko02 select order for AUC  getting this error Order 23 is not a capital investment measure Message no. AY097 Diagnosis Object concerned: Order 23 . The object is not an investment measure, either because there is

  • Some Filters not working

    Using Mac  OSX 10.9.1.  Using Photoshop Elements 11.  Is there a way to fix?