Linksys router no longer works with Westell 6100 modem

Hi all,
I came back after a 3 month work absence (and many days power outages, according to the neighbors), to find that my system can no longer connect to the internet using the Verizon Westell 6100 modem to a Linksys wrt54G router to 2 PCs!
I reset the Westell modem and directly connected the PC to it and THAT works okay, but put the router back in the mix (so I can connect my other PC) and nothing works!
I have read on this forum about 'Bridgeing" the Westell modem but nothing about setting up the router.
Can someone PLEASE give me explicit instructions on how to:
    1.)  set up the Westell modem in this "Bridge" mode,
    2.)  Set up the Linksys router to work with the modem again??
    3.)  Tell me why the old setup no longer works, did verizon change something for this modem?
Thank you VERY much for your help in this matter!
SUE  ;>)

the router has two connections.  one is called a WAN and that is a wide area network, and it means the internet in your case.  and one is called a LAN, local area network.  
what you saw means - that the way you connect to your internet is through PPPoE, a username and a password. 
and then way your LAN connects is DHCP,  how all of your local computers connect.  This is important, because after you bridge the westell, you will be setting your Linksys up for PPPoE connection, and NOT DHCP.      if you don't do this step, then you will never connect.  
that is fine, and normal.  if you follow the instructions at the link provided - you will be able to connect real easily.   
you will want to bridge the westell just follow the instructions for "If your Westell uses the red and black Verizon firmware:"

Similar Messages

  • Verizon Turbo Dsl plan with Westell 6100 modem? Help?

    So I have a westell 6100 modem and on the 7th I upgraded my bundle i had 1 Mbps for Internet , verizon homephone freedom essentials, and Directv. Since fios is not available were I live. And my new bundle is Verizon Dsl 7.0-1 Mbps turbo plan, verizon essentials and directv for $115.00. My question is will my modem provison the speed correct? will it still work? Or do I have to buy a new modem? Thanks!.
    Solved!
    Go to Solution.

    If you have been using the 6100 previously then the modem should sync to the new speed automatically.  If yareou still using an old style flat phone cable from the jack to the modem it may not be capable of the faster speed.  The round tan colored cable which originally was supplied with the modem would be the one to use.  I moved up recently from 3 to the turbo 7.1 via ASDL2plus and found that Verizon at my location has capped the speed at about 5.5.  Their out is to say speeds up to 7.1.

  • Linksys router no longer working

    I have had NO problem swith my linksys router unti I installed the model Westell 6100F.  After having to perform a hard reset on the dsl modem to get it to work. I tried to reconnect my router to my network and it will not connect.  I can connect to the net directly through the dsl modem but NOT through  the router. My router worked for years until Installed this new dsl modem.  I am using dhcp with all factory defaults for the router. - has anyone had this problem ?
    My router is a Linksys BEFSR41.
    Message Edited by fleeteedo on 02-19-2009 05:47 PM
    Solved!
    Go to Solution.

    Thank Provider 7.  The next day I noticed that my router and the new dsl modem were using the same address. Off I changed the address of the router and everything worked just fine.   For those of you who had the same problem go to the Linksys website and search the FAQ at http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2243
    Although I could have done it by myself there were step by stpe instructions - always nice to make sure you cover all the bases. So everything is working fine. I hope this post helps someone else !

  • Need help to set wireless Linksys Router WRT150N to work with Nettalk Duo

    I have Linksys Router WRT150N , connect to it Nettalk Duo but there is no ring tone, the orange light is flashing trying to connect, then i have the green light blinking then go Red.
    I thied to call Nettalk but no answer to their phone, chat with customer support at last they said someone from technical support will call back, but that not happen since two weeks.
    I make several tickets to them but no reply, service is very bad.
    Please any help to configer inside the router to recognise Nettalk, i have cable internet they said there is no blockage from there side.

    Hey sam63. Based from what I've read, RED lights means the device has failed to connect to the network. I'd suggest that you perform a powercycle. Unplug the power of the NetTalk Duo and the router for 30 seconds. Once done, power on the NetTalk first then, the router. Also, make sure that it is properly connected to the router's Ethernet port and the router is working online. You may try using another Ethernet cord or plug it into another Ethernet port. 
    If that won't work still, I found a link that might help you. Here: http://www.nettalk.com/support/customer-support/
    Help, learn and share

  • Linksys WRT54GL stopped working with Westell 6100

    ... it did really well for about 10 days, since I got the router.
    I setup everything per »Verizon Online DSL FAQ » http://www.dslreports.com/faq/13600
    Which is:
    Modem -> VC config -> Bridge mode on
    -> DHCP config -> Disable DHCP
    Router -> Setup -> PPPoE mode
    -> CenturyTel login and password
    -> Status -> Connect
    I think, but cannot recall 100% that in the meanwhile I changed the way that IP is assigned on PC to manual (trying to network PC and Laptop).
    And it worked (without the filesharing, planned to tweak Samba on my Linux based Laptop), for both my wired PC and wireless Laptop.
    As of today morning, Internet lights on both modem and router are off, Ethernet light on modem is blinking.
    I thought it has to do with last night thunderstorm but since it didn't work after couple hours, I try the phone and it works. I called CenturyTel support and got lead through the process of bringing back the modem to PPPoE mode, which verified that service is up and modem seems to be fine.
    We had to reset the IP assignment to auto. Technician told me to put the modem back into a bridge mode and said goodbye, probably thinking (just like me) that router will work again.
    Well, it didn't. No matter what I do, there is no way to get the router to connect to Internet.
    I understand it's shared Lunksys/CTL problem. Is the 2 year old modem to blame (I am using it right now, wired directly to PC) or 10 days old router just took last breath?
    Or else?
    Edit:
    - I called CTL support twice, have gone as far as they could show it on their side (putting modem into the bridge mode).
    - I called Hindi-based Linksys support two times also. Really long waiting times and just regular per-book answers with knowledge base around mine. Which obviously isn't enough. They of course tried to blame it on the modem.

    Thanks for help but the linked article didn't bring too much new.
    I have XP Pro PC that runs regular wired connection to the router and then Laptop that connects wirelessly with router.
    Both are down since router can't get PPPoE login through the modem. It was just fine for 10 days and got broken down without warning.
    Which could be:
    - some bad settings that eventually led to IP conflict
    - router is bad
    - modem is bad
    I am using modem right now so it's likely that its good.
    Router sometimes go bad so its a possibility.
    First option - sure, my good settings could have worked well only until something crashed them.
    The question is how do I fix it or is a return / replacement (and I am not sure if I want another Linksys since it is what it is).

  • Router suddenly no longer works with my iMAC. Please help, I'm desperate.

    SSIA, pretty much. One day, after a few years of working fine, my Linksys BEFSR41 Vers. 3 router just stopped working with my iMac. I've dtermined through process of elimination that it is indeed the router since I can access the internet by plugging the cable modem directly into my Mac and thus can write this to you guys now. I tried just hooking up the Mac and the router directly and trying to access it through the http://192.168.1.1 address. Didn't work. So I thought the router just crapped out for some reason. Then I went out and bought a brand new Linksys BEFSR41 Vers. 3 router. Considering I had no problem with the first one for a few years it seemed reasonable. Now that one won't work either. Although I can access it via the 192.168.1.1 address. However once I do that, I no idea what to do. I tried to upgrade firmware and that was only supposed to "take a few minutes" but it said that for 3 hours so I stopped it. The thing is, with the first router I didn't need to do a thing. All I had to do was plug it in and it worked beautifully with my iMac and TiVo. Maybe something in my iMac wigged out and that why it won't work with these things anymore. I don't know. Does anyone have any suggestions as to what I can do to get my iMac and TiVo back online again via this router? I truly appreciate any help and the patience it must've taken you to get this far in reading long post.
    Sincerely,
    Scott

    Oh my God thank you so much. I spent the last week trying to figure this **** thing out and that's all it took. Sometimes the most simple explanation is all that's required but last looked at. Thank you for pointing out the obvious. I kinda wish Linksys would've pointed that out to me when I exchanged a total of 25 e-mails with them. Oh well. Thank you again. I am so grateful.

  • Verizon DSL, Westell 6100 modem/router, and Airport Extreme

    Useful info so you won't have to go through what I did.
    Verizon ISP using the Westell 6100 modem/router & Airport Extreme.
    The Westell 6100 was configured during installation as a modem and router with a direct connection to the Mac. You can actually connect Airport Extreme at this point with an ethernet connection to the Westell and it will work, but you can't do any of the sharing things (remote login, personal web sharing, etc.) To do those things the Westell needs to be in the Bridge mode. In a nutshell, you have to edit the Westell's VC configuration to establish Bridge mode, and disable its DHCP server. Then you have to set up the Airport to connect using PPPoE using the Account Name and Password from Verizon.
    1. With the Westell connected directly to the Mac, access the device at 192.168.1.1.
    a. Under VC Configuration the first of seven configurations should already be enabled as VPI 0, VCI 35 using PPPoE. Edit that one and change it to Bridge mode.
    b. Under DHCP configuration, disable the DHCP server. You can also do this under the Private LAN Configuration page. If at the latter, do not attempt to disable the Private LAN (it won't let you anyway). Verizon tech support kept insisting I had to disable the Private LAN, which caused a great amount of anguish!
    c. Before leaving 192.168.1.1 (you won't be able to access it again once the Airport is connected and configured) make sure you know your ISP account name and password. This was assigned during my setup procedure with Verizon, a random selection of letters and numbers.
    2. Now hook up the Airport WAN to the Westell's ethernet port and the Mac to the Airport LAN. Fire up Airport Admin Utility.
    a. Under the Internet tab, select Connect Using PPPoE.
    b. Configure PPPoE using the Verizon Account Name.
    c. Change password to the Verizon account password.
    3. Restart and that's it.

    Thank you for your post. When I moved to another home, Verizon sent me the Westell 6100 and I had been having trouble staying connected to the Internet with my Airport. Last night, I loss wireless access and the Airport status in the menu bar read "Looking for a PPPoE connection". Verizon customer support was able to get me back online, albeit with only a direct Ethernet connection between my iBook and the 6100.
    I found your post and followed your instructions. Now all the iBooks in our household are back online via the Airport. Thank you very much!
    iBook G4 933Mhz   Mac OS X (10.4.7)  

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HP LaserJet Profession​al M1217nfw no longer works with ipad/iphon​e's coupons.co​m and Grocery IQ apps

    I have had this printer for several years. It worked flawlessly until a unilateral automatic HP firmware update bricked it at the beginning of last year. After months of inactivity, it started working again last week after I deleted and reinstalled everything from scratch.
    Everything is back the way it was -- except the two apps I really value no longer work with it.
    My iphone and ipad -- which both worked flawlessly with this printer for years -- now do not see the printer at all for several minutes and then it finally appears with a red warning button that says "printer not recognized"
    I have not upgraded any OS.  The only thing that changed was on HP's end.
    I tried deleting and reinstalling the apps. No change.
    I have HP's eprint software, but that does not help with these apps, as they use an internal printing mechanism and the actual coupon with the bar code is never visible on screen (and thus unable to be printed via another method).
    This question was solved.
    View Solution.

    Hi @krenster
    Welcome back to the HP Support Forums. I understand that there are two apps that no longer work with Apple’s AirPrint feature.
    I know you didn’t mention that you were getting this error, but the troubleshooting steps for “What if a 'No AirPrint Printers Found' message displays on my Apple device?” in the Printing Over a Wireless Network with Apple's AirPrint FAQs document should help resolve the issue.
    If the above doesn’t help, to better assist you, would you please supply some additional information?
    How is the printer connected (USB cable, ethernet, or wireless)?
    Are you able to print from other apps that support AirPrint?
    What version of iOS are you using on your Apple mobile device? I’m asking because apps will send out updates making them no longer functional with older operating systems. For example the HP ePrint app on iTunes was updated on October 25, 2014 and now requires the iOS device to be a minimum of iOS 6.0 or later. I have checked the two apps you mention in the thread title, and the Grocery IQ app requires your Apple device to be a minimum of iOS 6.0 or later and the coupons.com app requires your Apple device to be a minimum of iOS 7.0 or later.  If you are unsure how to check this, please follow the steps in Apple’s iPhone, iPad, iPod: How to find the software version
    Has there been any changes to your network, such as a new router, or a new internet provider?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    Giancarlo Messalli wrote:
    1) are you sure a reset holding the reset button will not delete my data?
    Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
    For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
    2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
    Thank you again
    I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
    Here is the Apple info on reset.
    http://support.apple.com/kb/ht3728
    And here is the quote from the horse's mouth so to speak.
    Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

  • My iPhone no longer works with my wi-fi network.  It detects the network but can't communicate, even though it did so until today for months.

    My iPhone no longer works with my wi-fi network.  It detects the network but is unable to communicate, even though until today it worked great for months.  The network is Verizon FiOS Internet on an M1424WR router.  PCs and iPad continue to work with the same network without any problem.  Any ideas?

    have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

  • AE & Verizon DSL with Westell 6100 Configuration Settings Question

    Hello,
    Has anyone configured their Airport Extreme with Verizon DSL using a Westell 6100 modem in the last few months? I'm wondering if you have any particular tips or have a set of screen shots of the process. I'm walking my mother through the process remotely and having some issues. Any help would be appreciated!
    I'm specifically wondering whether I have to set the modem into bridge mode first, then use the AE to log into Verizon service via PPoE? Do I need to call Verizon & tell them my AE's MAC address first?
    Thank you,
    Chris

    Is there an "Airport Extreme User's Guide"? When I look at the manuals available for download under Apple's support page for Airport Extreme and Airport Express, I see a "Airport Extreme Card User's Guide," but not one for those of us with Airport Extreme base stations. Am I missing something?
    My Verizon DSL (also via Westell 6100 DSL modem, just like Chris') works fine with my desktop, but when I power up a G3 iBook, I have to wait forever for it to boot if it's in range of my home network. I'm trying to fix that problem, so I'm wondering if I need to reexamine the way my DSL modem and base station are configured, just like Chris.

  • Replacing Westell 6100 modem with Netgear Genie

    Good day. I'm replacing Westell 6100 modem with a Netgear Genie. I need the following data to complete hookup. Thanks.
    Netgear Broadband ADSL2+ Modem (DMP111SP)
    IP Address
    Subset Mask
    Default gateway
    Preferred DNS Server
    Alternative DNS Server

    Since you're plugged into the Westell, use http://192.168.1.1/ to log into the modem. From there, see if your modem shows something along the lines of "Routed Bridge" mode or if it shows "PPPoE" as the connection type. If PPPoE, follow the post I mentioned above. The same goes with Routed Bridge mode. Worst case scenario, call Verizon and have them ensure your Westell is configured correctly if you cannot get online with the Westell, and from there we'll see how the Netgear needs to be configured.
    Also, what may have happened here is your Netgear's IP address could have changed. You will want to open up a Command Prompt Window (Start > search for the program "cmd.exe" or go to Start > Run > enter in cmd.exe) and run the command ipconfig. Default Gateway should give the IP of the router you're attached to in a home network.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Function keys no longer working with a new keyboard...

    I got a new keyboard and my function keys no longer work with it.  I am used to have them used in the standard format, i.e. F10-F12 control the voume, etc.  I have the "Use all f1,f2, etc." button clicked.  I have also tried restarting my computer.  Any thoughts?

    Try doing a SMC reset and PRAM reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

Maybe you are looking for