Linux installation problem on D20

Hi, guys,
I am trying to install Redhat Linux x86_64 5.3 on D20 with a Marvell 88SE63xx/64xx SAS controller. As the Linux installer cannot recognize the SAS controller, I download a driver of Marvell mv64xx for Redhat x86_64 5.2 from Lenovo driver matrix website. Unfortunately, no matter how I follow the instruction to load the driver, the so-called mv64xx doesn't drive the Marvel 88SE63xx/64xx SAS controller in D20, so that the Redhat 5.3 Linux installer cannot find any hard drive. This is ridiculous and ironic because I got 5 SAS 15rpm hard drives in D20. Does anyone know how to resolve this problem and get Redhat Linux 5.3 installed on D20 with SAS drives?
Solved!
Go to Solution.

hello, good news everyone
today i tested the upcoming kernel 2.6.31-1 with ubuntu server x64  (9.10 / karmic)
and what can i say?
[    2.536365] mvsas 0000:01:00.0: mvsas: driver version 0.8.2
[    2.536374] mvsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.536379] mvsas 0000:01:00.0: setting latency timer to 64
[    2.537283] mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[    7.769579] scsi7 : mvsas
[    7.769954] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 380hy 2 byte dmaded.
[    7.770674] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 1365:found dev[0:5] is gone.
[    7.778539] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[    7.778543] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.779378] ata7.00: configured for UDMA/133
[    7.779426] scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
the kernel included the mvsas module and its dependant, and ran out of the box doing anything. and yes, it's a software raid, the bios offers raid 5 and 10, but they are greyed out. okay, my graphic is now broken with 2.6.31-1, but hey, the 5 port's are working i almost forgot where i have put the 500gb disk. hdparm -tT showed 7.8gb/s buffered and 77mb/s normal read, which is normal for the drive. 
because of the nature of a module, i believe you have to compile a kernel with support of mvsas on your own to boot linux from it, or you use the ich10 - only for optical drives - sata port, which works fine with the intel x25-m ssd.
Message Edited by docc on 07-02-2009 12:06 AM

Similar Messages

  • Java Plug-in linux installation problem

    Hi!
    I am new to this subject, but I want to comment that I have problems installating the java plugin into my netscape 7.0 for Linux. My platform is Red Hat Linux 7.3.
    I have followed the instructions written in
    http://java.sun.com/j2se/1.3/install-linux-sdk.html#install-pkg
    but I still found that the plugin is not installed. (i.e when I open a web page that
    requires java plugin I still see a window saying "this page contains information type
    (application/java-vm) that can only be viewed with the appropiate Plug-in..")
    and also as confirmation the web page:
    http://wp.netscape.com/plugins/manager.html
    checks that that it is not installed the plugin.
    Would anyone please help me?

    You posted a problem that would be answered better and faster in a Linux or Netscape forum.
    You posted an installation question to "New to Java...", ignoring the fact that there is an "Installation" forum where you're more likely to get an answer.
    You posted a question that has, in fact, been answered in these forums already. You didn't bother to use the "Search" function. Try "plug-in linux install", and check out the first page of results.
    You posted a note, and waited FOUR WHOLE HOURS before whining that nobody's helping you. I'm amazed at your display of patience and understanding.
    Hint: this is a volunteer forum, inhabited by random Java developers. People answer when and as they have the time or inclination. Nobody here is getting any kind of return from responding. Nobody here owes you ANY response, much less an immediate one.
    Grant

  • Oracle 8i enterprise client linux installation problems

    Hi,
    I have a problem installing oracle 8i client on linux machine. It gives an error message when I tried to run runInstaller.
    this is the error message:
    Initializing JAva Virtual Machine from /usr/local/jre/bin/jre. Please Wait...
    Error in CreateOUIProcess():-1
    :Bad address
    The machine is PII 450 with 128 mb of ram
    Thanks,
    Gurhan Gunduz
    850-6447018

    Gurhan,
    I think it has nothing to do setting the JRE enviroment .from what I could remember is you have to install a JRE enviroment patch..
    If you check you insallation documentation..
    it tell you where to get the patch from..and I also think that you have to create symbolic link...
    If you need more info on this..I could send you the URL..where you could get the patch..
    send me an email..if you need futher assistance..I could then send you the url to get the patches from...
    good luck.
    shah

  • Linux installation problems

    Hello All,
    I'm trying to install JES5 (java_es-5-ga-linux-x86.zip) on RHEL4 and getting errors during the install. I have installed and uninstalled 2 or three times on this server. I have attached the errant installation summary file and the critical part of the install log below. If someone can point me in the right directiron or tell me where else to look for more details on what might be wrong. I'd appreciate it.
    --Frank
    Installation Summary Report
    Install Summary
    Java Enterprise System 5 : Installed
    Sun Java(TM) System Message Queue 3.7 UR1 : Installed
    Sun Java(TM) System High Availability Session Store 4.4 : Installed, Configured
    Java DB : Installed, Configure After Install
    Sun Java(TM) System Application Server Enterprise Edition 8.2 : Installed, Configuration Failed
    Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configuration Failed
    Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
    Service Registry 3.1 : Installed, Configure After Install
    Sun Java(TM) System Portal Server 7.1 : Installed, Configuration Failed
    Configuration Data
    Sun Java(TM) System Application Server Enterprise Edition 8.2 :
    Domains and Instance Configuration Directory : /var/opt/sun/appserver
    Application Server Installation Directory : /opt/sun/appserver
    Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
    Directory Server Installation Directory : /opt/sun
    Sun Java(TM) System Access Manager 7.1 :
    Access Manager Installation Directory : /opt/sun
    IS Server Instance Port Protocol : http
    LDAP User ID : amldapuser
    Administrator User ID : amAdmin
    Web Container : AppServer
    Access Manager Application Server Installation Directory : /opt/sun/appserver
    Document Root : /var/opt/sun/appserver/domains/domain1/docroot
    Access Manager Console Host (for Existing console) : casddevl2.thehartford.com
    Access Manager Console Deploy URI : amconsole
    Access Manager Password Deploy URI : ampassword
    Access Manager Console Port(for Existing console) : 8080
    Access Manager Services Deploy URI : amserver
    Access Manager Cookie Domain List : .thehartford.com
    Access Manager Common Domain Deploy URI : amcommon
    Access Manager Directory Server Host Name : casddevl2
    Access Manager Directory Server Host : casddevl2.thehartford.com
    Access Manager Directory Server Port : 389
    Access Manager Directory Root Suffix : dc=thehartford,dc=com
    Access Manager Directory Manager DN : cn=Directory Manager
    Organization Marker Object Class : sunISManagedOrganization
    User Marker Object Class : inetorgperson
    Organization Naming Attribute : o
    User Naming Attribute : uid
    Service Registry 3.1 :
    Service Registry Installation Directory : /opt/sun/srvc-registry
    Sun Java(TM) System Portal Server 7.1 :
    PS Install Base Directory : /opt/sun
    JDK Install Directory : /usr/jdk/entsys-j2se
    Web Container Type : SUNONE8
    Web Container Install Directory : /opt/sun/appserver
    Web Container Domain Directory : domain1
    Web Container Instance : server
    Web Container Document Root Directory : /var/opt/sun/appserver/domains/domain1/docroot
    Web Container Administrator : admin
    Web Container Administration Protocol : https
    Web Container Administration Host : casddevl2.thehartford.com
    Web Container Administration Port : 4849
    Directory Server Host : casddevl2.thehartford.com
    Directory Server Port : 389
    Directory Manager DN : cn=Directory Manager
    Access Manager Install Base Directory : /opt/sun
    Access Manager Service Deployment URI : /amserver
    Access Manager Console Deployment URI : /amconsole
    Organization DN : dc=thehartford,dc=com
    Access Manager Password Key : UWIR6nYwSABbf2Krzy+fpg6OxuoVxzvH
    EntSysResources:PS_DEPLOY_NOW : y
    Install Sample Portal(s)? : true
    EntSysResources:SRA_SWITCH_CORE : false
    Portal Access URL (protocol://host:port/portal/dt) : http://casddevl2.thehartford.com:8080/portal
    Portal ID : portal1
    Search ID : search1
    The configuration log is saved in : /var/opt/sun/install/logs/JavaES_Install_log.1169139828
    Errant portion of installation log
    Command /opt/sun/appserver/bin/asadmin stop-domain --domaindir /var/opt/sun/appserver/domains domain1 generated the follwing outputs:
    |#]
    [#|2007-06-25T08:59:36-04:00|CONFIG|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=;_JavaESResourceBundle=|
    The domain (domain1) isn't running.|#]
    [#|2007-06-25T08:59:36-04:00|WARNING|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=;_JavaESResourceBundle=|
    CLI157 Could not stop the domain domain1.|#]
    [#|2007-06-25T08:59:36-04:00|SEVERE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=startRequiredServers();_JavaESMessageID=JavaES_ConfigPS50;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/opt/sun/appserver/bin/asadmin stop-domain  --domaindir /var/opt/sun/appserver/domains domain1|error in stopping the application server: /opt/sun/appserver/bin/asadmin stop-domain  --domaindir /var/opt/sun/appserver/domains domain1|#]
    [#|2007-06-25T08:59:36-04:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=startRequiredServers();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
    [#|2007-06-25T08:59:36-04:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=debugCmd();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
    [#|2007-06-25T08:59:36-04:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=debugCmd();_JavaESMessageID=;_JavaESResourceBundle=EntSysLoggingResources|/opt/sun/portal/bin/psconfig|#]
    [#|2007-06-25T08:59:36-04:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=debugCmd();_JavaESMessageID=;_JavaESResourceBundle=EntSysLoggingResources|--config|#]
    [#|2007-06-25T08:59:36-04:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=debugCmd();_JavaESMessageID=;_JavaESResourceBundle=EntSysLoggingResources|/var/tmp/psconfig_casddevl2.thehartford.com_118277637601211313.xml|#]
    [#|2007-06-25T08:59:36-04:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=debugCmd();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
    [#|2007-06-25T08:59:37-04:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=JavaES_Config0010;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/opt/sun/portal/bin/psconfig|
    Command /opt/sun/portal/bin/psconfig generated the follwing outputs:
    |#]
    [#|2007-06-25T08:59:37-04:00|CONFIG|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=;_JavaESResourceBundle=|
    Successfully created PSConfig.properties file|#]
    [#|2007-06-25T08:59:37-04:00|WARNING|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=;_JavaESResourceBundle=|
    Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/tools/ant/BuildListener
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
         at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:128)|#]
    [#|2007-06-25T08:59:37-04:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=stopRequiredServers();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
    [#|2007-06-25T08:59:37-04:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=stopRequiredServers();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
    [#|2007-06-25T08:59:37-04:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
    [#|2007-06-25T08:59:37-04:00|WARNING|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=performConfiguration(compID, configParams);_JavaESMessageID=JavaES_Config0007;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=PortalServerL10n|UnConfiguration failed for PortalServerL10n|#]
    [#|2007-06-25T08:59:37-04:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=ConfigLeaf;_SourceMethodName=install(WizardState);_JavaESMessageID=JavaES_Config0002;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=PortalServerL10n|
    *** End configuring PortalServerL10n ***
    |#]
    [#|2007-06-25T08:59:38-04:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=JavaES_Config0010;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/opt/sun/appserver/bin/asadmin stop-domain  --domaindir /var/opt/sun/appserver/domains domain1|
    Command /opt/sun/appserver/bin/asadmin stop-domain --domaindir /var/opt/sun/appserver/domains domain1 generated the follwing outputs:
    |#]
    [#|2007-06-25T08:59:38-04:00|CONFIG|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=;_JavaESResourceBundle=|
    The domain (domain1) isn't running.|#]
    [#|2007-06-25T08:59:38-04:00|WARNING|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=;_JavaESResourceBundle=|
    CLI157 Could not stop the domain domain1.|#]

    Howdy, it looks as though the Application Server did not install properly, and as a consequence the Portal server fails to install.
    Please make sure that you have un-installed all components properly first before re-installing... See my previous post.
    If it were me, I'd install the Directory Server and Application Server first... After a successful install of Application Server, re-start the installer, selecting Portal Server and Access Manager. When doing so, make sure the Application Server and Directory server can be started prior.
    By the way, have you seen the following blurb in the documentation from Sun , see: http://docs.sun.com/app/docs/doc/819-5025/6n74td5j0?a=view
    Remove the link /usr/share/bdb/db.jar before installation, if it exists.
    Check ant already exists on the system by running the following command:
    rpm -qa | grep ant
    If a version of ant below 1.6 is installed, remove it by running the following command:
    rpm -e ant-older-version ant-libs-older-version
    You need to use the version of ant sun-ant-1.6.5-2 to install or deploy Portal Server. When you run the installer, it is automatically installed at /opt/sun/bin/ant.
    Next make sure you following Sun's Documentation on the installation process, bar installing App Server and Directory Server first, see: http://docs.sun.com/app/docs/doc/819-5025/6n74td5j3?a=view
    If after all of the above, and your still unable to install portal server, please log a support call with Sun, 1800 555 786 quoting your support contract ID.
    Cheers,
    Chris

  • Linux installer problem

    hi,
    when i run the installer for afp 9 as root the installer
    rejects /usr/lib/mozilla as valid path (but it is a valid path
    where the stuff is suppose to be).
    please advise.
    thank you,
    -zander

    this is for the .tar.gz linux package.

  • Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

    hello support,
    i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
    I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1          oracle localhost.localdomain localhost
    ::1          localhost6.localdomain6 localhost6
    is this ok? what can I do to bring the database-installation to success?
    Thank's for help ;-)
    Edited by: user5782904 on 09.05.2010 14:06

    Here I paste you the configuration of my latest linux box which has a similar environment like yours.
    # hostname
    vmrhel6032.quist.ch
    # domainname
    (none)
    # cat /etc/hosts
    192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
    127.0.0.1     localhost  localhost.localdomain localhost4 localhost4.localdomain4
    ::1           localhost  localhost.localdomain localhost6 localhost6.localdomain6
    # cat /etc/sysconfig/network
    NETWORKING=yes
    HOSTNAME=vmrhel6032.quist.ch
    # cat /etc/sysconfig/network-scripts/ifcfg-eth0
    # Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
    DEVICE=eth0
    HWADDR=00:0C:29:6A:98:70
    ONBOOT=yes
    NETWORK=192.168.1.0
    NETMASK=255.255.255.0
    IPADDR=192.168.1.205
    #Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
    # hostname
    vmrhel6032
    # domainname
    (none)
    # cat /etc/hosts
    192.168.1.205 vmrhel6032
    127.0.0.1     localhost  localhost.localdomain localhost4 localhost4.localdomain4
    ::1           localhost  localhost.localdomain localhost6 localhost6.localdomain6
    # cat /etc/sysconfig/network
    NETWORKING=yes
    HOSTNAME=vmrhel6032
    # cat /etc/sysconfig/network-scripts/ifcfg-eth0
    # Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
    DEVICE=eth0
    HWADDR=00:0C:29:6A:98:70
    ONBOOT=yes
    NETWORK=192.168.1.0
    NETMASK=255.255.255.0
    IPADDR=192.168.1.205
    #Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • Installation problem on SUSE 12.1

    Hi
    I'm a Linux beginner and I am trying to install LV on SUSE 12.1
    I've also posted my problems on Lava:
    http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
    The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
     Any ideas?
    Is there a way to debug to see what's going on?
    Cheers,
    Mike
    Solved!
    Go to Solution.

    Hi Mike,
    Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest. 
    Best,
    Dan N
    Applications Engineer
    National Instruments 

  • Application Server 8.2 on RedHat Linux configuration problem

    Hello,
    We have OS Red Hat Enterprise Linux ES release 4 (Nahant Update 4),
    sun java 1.5.0,
    Sun Java System Application Server Platform Edition 8.2 (build b06-fcs),
    cpu : Intel(R) Pentium(R) D CPU 3.40GHz,
    ram : MemTotal: 2073848 kB,
    hdd : 2x SATA hdd 36Gb,
    NIC : 2x 1Gb/s LAN.
    We have problem with standart Sun Application Server Configuration on Linux.
    Even AdminGui application doesn't work properly.
    Some times, AdminGui application returns
    Unabled to handle pre-compiled JSP '/jsp/LogDetail.jsp'. Expected pre-compiled classname: 'org.apache.jsp.jsp.LogDetail_jsp'.
    Some time on browser we have "The page can not be displayed" exception and so on.
    We deployed our JSF web application on this server and have same problems with our web application. In my opinion it looks like Linux or Sun Application Server misconfiguration, but I don' t know Idea where to look.
    Help me please.

    As you already noticed, RH Linux 8.0 and 9.0 are not on the list of officially supported platforms for Application Server 8.1, but you should still be able to install and run on those Linux versions without major issues.
    Follow generic Linux installation instructions, if you do run into some problems take a look at this article which describes some common workarounds, specifically section titled "Problem: My Linux distribution is not on the list of officially supported platforms for J2EE 1.4 SDK":
    https://j2ee-sdk.dev.java.net/howtos/J2EE_SDK_Installation_HOWTO.html

  • Installation problem on Intel

    I have tried to install Solaris 8 on my Dell machine.
    I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
    The first screen says this....
    SunOS Secondary Boot version 3.00
    WARNING: ACPI Tables not in Reclaim Memory
    prom_panic: kmem_free block already free
    Entering boot debugger:
    [130ee5]:
    and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
    I don't know what the ACPI tables are .. and how i can fix this...
    Anyone who knows this... please help..
    Thanx a lot..

    I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

  • Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

    Help!
    I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
    HpSdpAppCoreApp
    "The feature you are trying to use in on a network resource that is unavailable.
    Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
    The last time I dug through some files on my own, bad things happened.
    Thanks,
    C

    good gracious, Chris ...
    okay, try applying the general advice on installation problems given here:
    http://docs.info.apple.com/article.html?artnum=93976
    ... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • Installation Problem on Win8

    Hello all
    I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
    Thank you guys for your support.
    Installation Logs:
    java_install.log - Pastebin.com
    java_install_reg.log - Pastebin.com
    JavaDeployReg.log - Pastebin.com

    Hi people!
    I have two problems with nokia suite...
    first of all I can't install it at my windows 8.1, I receive the message attached...
    Second,
    in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
    can somebody help me?
    Attachments:
    mokiasuit.png ‏13 KB

  • Installation problem on RHEL4 ..

    Installation problem on RHEL4 (Red Hat Enterprise 4) i have
    install start at unzip tar.gz and tar -xf .... now i have run
    ./installFMS it show
    ./fmsini: error while loading shared libraries: libstdc++.so.5:
    cannot open shar
    ed object file: No such file or directory
    ERROR: Your are running the Macromedia Flash Media Server
    installer
    on the wrong platform.
    it not support for fedora or anything else?
    plz help....

    would be nice if someone responded to this.... Macromedia
    wouldn't have been this lax in giving a reply :) AND they keep up
    with OS updates too :)

  • Xp_logininfo Installation problem

    Hello gurus,
    I'm facing the same problem as described in this link:
    Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
    the error I get is similiar:
    <i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
    but I just don't get how to solve it.
    -I've tried to use the profiler but didn't find any information that will help me to solve.
    -One of the guys wrote to add "logon rights" to the user ... what does it mean ?
    Please advice,
    Dimitry Haritonov

    Hi sven,
    Thank you very much for the quick and direct answer.
    The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
    I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
    Best regards,
    Dimitry Haritonov

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

Maybe you are looking for