Linux(RH7.3) and 9idevSuite errors (FRM-91111 and FRM-100039)

I have installed 8i and 9i(r2) on a linux server (Redhat 7.3) with databases running. I have installed the 9i Developer Suite (as oracle) in a separate ORACLE_HOME and can successfully start an xterm session, xeyes, etc as the oracle owner. Also I can start the JDev from the 9iDS install - no problem. BUT when I try to start the forms designer (f90desm.sh or f90desm) I get FRM-91111 and FRM-10039 which, from Metalink, tells me there is a problem with the X-windows and the DISPLAY value. I am using enlightenment windows manager (not gnome). Well, like I said I don't have any problem with x processes (see above) and I looked thru metalink and other newsgroups for help and have tried everything suggested. Still getting these errors.

Sorry - No solution here, but perhaps I can add some to the collection of facts
I'm just starting up this learning curve, so be gentle please.
Running SuSE 8.1, KDE3.
Installed developer from downloaded 9.0.2iDS_LINUX.cpio
to a machine with no other oracle products installed.
Had to modify ./bin/genclntsh to get it to link.
#SYSLIBS=`cat ${ORACLE_HOME}/lib/sysliblist`" -ldl -lm -lc"
SYSLIBS=`cat ${ORACLE_HOME}/lib/sysliblist`" -ldl -lm -lc -lgcc_s"
So I admit to being non-standard :(
I start the OC4J HTTP Listener, I can connect to host:8896
My $DISPLAY and xhost permissions are fine, I can run X apps and can run jdev.
./f90desm.sh
FRM-91111: Internal Error: window system startup failure.
FRM-10039: Unable to start up the Form Builder.
In the Bad old days I used to have trouble with some versions of java only working with 8 bit displays. Changed my display to 8 bit, no help.
Tried telnetting in from a SUN and running forms to it's display, same error. (yes, xhost permissions and DISPLAY set correctly and working with other remote X apps.)
Went so far as to "sh -v f90desm.sh" and cut and paste my way though it's actions so I could then "strace f90desm" to look for anything that seemed to jump out at me. I don't know enough to reach any great conclusions, but if anyone thinks it useful I can provide the output.
Suggestions?

Similar Messages

  • TA38482 I have an other kind of error occuring in my Itunes program: "unknown error has occurred (-42110) what can I do!!!!! I have uninstall the program and re-installed and the error appears again, and again.

    I have an other kind of error occuring in my Itunes program: "unknown error has occurred (-42110) what can I do!!!!! I have uninstall the program and re-installed and the error appears again, and again. Itunes still works, but every time I open it...the error shows up.

    If your iTunes is up to date, remove the SC Info folder.

  • FRM-91111 and FRM-10039 , cant open Forms Builder

    hello again , so here iam having this error again , no idea whats causing it :\
    ./frmbld.sh
    FRM-91111: Internal Error: window system startup failure.
    FRM-10039: Unable to start up the Form Builder.
    iam on Archlinux i686
    $DISPLAY is set to :0.0 and i can launch any GUI application with the oracle user ( oradev )
    also checked for openmotif , installed 2.3.0 and still nothing.
    edit :
    NLS_LANG is set to AMERICAN_AMERICA.UTF8
    Edited by: L3thal on Nov 21, 2009 8:00 PM

    xhost +
    access control disabled, clients can connect from any host
    FRM-91111: Internal Error: window system startup failure.
    FRM-10039: Unable to start up the Form Builder.
    EDIT:
    ok so i had to install the old openmotif 2.1.30 from rpm ( couldnt compile )
    Edited by: L3thal on Nov 23, 2009 6:47 AM

  • ESS Career and JOB  error in DSM and SSO

    Hi All,
    I have installed ECC in WAS 6.4. All other pages are working except career and job. When I am clicko on JOB search then I am getting a popup saying :
    <b>Session Management</b> will <b>not</b> work !
    Please check DSM log for details.
    You can turn off this alert inside 'Support Desk' -> 'SAP Application'
    Afetr clicking OK it is giving message
    <b>Logon Error</b>Logon requires activated <b>Single Sign-On on</b> this server. This is not the case. Contact your system administrator
    Same server I am using as ITS server and there SSO is working. I have exported certificate from portal (WAS 6.4 java) and imported in WAS ABAP (ECC 5.0)
    Thanks in advance
    Raktim

    The alias SAP_WebDynpro_XSS is the alias on the portal for a myERP2004 system.
    If you search for the Installationguide for MySAP ERP 2004 Java components,
    you will see that this includes a XSS component 5.0 and contains amongst others ESS and MSS.
    This needs to be configured as well.
    The other alias above mentioned need to be created on the myERP2004 system using this URL (Webdynpro Admin):
    <http://<ERPserver>:<PortNo>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu 
    More information can be found here :
    http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/ca/115e4088dc0272e10000000a155106/content.htm
    Hope that helps,
    Kai
    Message was edited by: Kai Unewisse

  • Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up and has completly wiped my phone and the screen is blank. what do i do?

    Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up phone wont update and has gone  completly blank. what do i do?

    the error message is (-1)

  • Sharepoint web application was unable and show error 403 forbidden and 503 server errors

    Hi 
    i some times loose connection to sharepoint site where i am working with,i was just run some powershell scripts to update
    a filed value in a document library only
    and it some times show in browser 403 Forbidden error and some times 503 server error 
    when i check in event viewer i got this below errors
    adil

    That particular 'error' is OK. It just means that a non-Farm Admin service account doesn't have the rights to run that sproc. Normal with best practice security in mind.
    You may want to check the IIS logs to see what the
    subcode for the 403/503 errors are.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I have made attempts to upload iOS6 and an error message occurs and kicks me out?

    I have made attempts to upload iOS6 to several I-Pads we use in our business.  An error message comes up that an error occurred while downloading.  I have made the attempts via Wi-fi and connected to I-tunes on my computer but having the same results.  Any help?

    What is the error message? Is it numbered?
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I tried ugrading to the ios 5 today and got error code 1 and now my phone wont turn on. happen to anyone else?

    any suggestions?

    Restart computer, open current iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes reconizes iPhone in Recovery Mode, click Restore button of iTunes.

  • Frozen ipod after new updates, will not recover, error codes 1601 and 1602

    i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.

    I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
    Try these steps with your touch.
    1. Unplug the device from your computer
    2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
    3. Start iTunes
    4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
    5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
    6. Let go of the button and follow the on screen instructions to restore the touch.

  • AVCHD Import Error In Log And Transfer Window

    Hey,
    I just bought FCE4 and also a canon hf100 camera. When i try to ingest clips from the camera (in avchd format) with the log and transfer window an error icon comes up and says : "error: no data" and the file is not successfully imported. I tried switching my audio preferences to normal stereo instead of matrix but that did not help.
    Any help would be great!
    Jackson

    What format exactly did you shoot with that camera? What settings are you using in FCE?

  • I tried to uninstall Adobe 8 and received error 1606

    I tried to uninstall Adobe 8 and received error 1606 "%APPDATA%\" and then when I tried to install Adobe 9 received same message. Can anyone help?

    Just go to this link:
    http://kb2.adobe.com/cps/402/kb402867.html
    and follow any one of the solutions that might solve the problem you have

  • Odd behavior with linux 2.6.35.6 (ATI, average load and memory)

    hello folks
    have you tried the 2.6.35.6 kernel? 'cause i am having some problems with it.
    when i first upgrated, i compiled my kernel from www.kernel.org and at my first boot i noticed an 50 MB increase on the memory consumption ( the one that you get with "Free -m").
    normally with the 2.6.34.2 kernel i got ~200MB with kde running but with this version i got ~252MB, i also got this stats with the official archlinux's kernel.
    the second thing i notice is that the load average is nearly 0.50 all the time in 2.6.35.6 from archlinux's repos and the compiled by myself , and the system is on idle at that time
    and for last i got odds quirks from the radeon driver, i got a Radeon HD 3300 (integrated nothing fancy ) and it worked right on 2.6.33 and 2.6.34 but with 2.6.35 and 2.6.36-rc5 after some minutes the system kicks me to KDM,
    here i have the logs from the kernel 2.6.36-rc5 and the 2.6.34 ( the last one that worked right), please just check the finals 5 lines of the following log
    Sep 27 19:47:22 localhost kernel: Linux version 2.6.36-rc5-git7 (slack@Soul) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Mon Sep 27 13:05:35 CLT 2010
    Sep 27 19:47:22 localhost kernel: Command line: root=/dev/disk/by-uuid/6448e149-dad3-4aa2-ab86-a71b0ffbfae3 ro
    Sep 27 19:47:22 localhost kernel: BIOS-provided physical RAM map:
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 0000000000100000 - 000000006ffb0000 (usable)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 000000006ffb0000 - 000000006ffbe000 (ACPI data)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 000000006ffbe000 - 000000006ffe0000 (ACPI NVS)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 000000006ffe0000 - 0000000070000000 (reserved)
    Sep 27 19:47:22 localhost kernel: BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
    Sep 27 19:47:22 localhost kernel: NX (Execute Disable) protection: active
    Sep 27 19:47:22 localhost kernel: DMI present.
    Sep 27 19:47:22 localhost kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    Sep 27 19:47:22 localhost kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    Sep 27 19:47:22 localhost kernel: e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    Sep 27 19:47:22 localhost kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    Sep 27 19:47:22 localhost kernel: No AGP bridge found
    Sep 27 19:47:22 localhost kernel: last_pfn = 0x6ffb0 max_arch_pfn = 0x400000000
    Sep 27 19:47:22 localhost kernel: MTRR default type: uncachable
    Sep 27 19:47:22 localhost kernel: MTRR fixed ranges enabled:
    Sep 27 19:47:22 localhost kernel: 00000-9FFFF write-back
    Sep 27 19:47:22 localhost kernel: A0000-EFFFF uncachable
    Sep 27 19:47:22 localhost kernel: F0000-FFFFF write-protect
    Sep 27 19:47:22 localhost kernel: MTRR variable ranges enabled:
    Sep 27 19:47:22 localhost kernel: 0 base 000000000000 mask FFFFC0000000 write-back
    Sep 27 19:47:22 localhost kernel: 1 base 000040000000 mask FFFFE0000000 write-back
    Sep 27 19:47:22 localhost kernel: 2 base 000060000000 mask FFFFF0000000 write-back
    Sep 27 19:47:22 localhost kernel: 3 disabled
    Sep 27 19:47:22 localhost kernel: 4 disabled
    Sep 27 19:47:22 localhost kernel: 5 disabled
    Sep 27 19:47:22 localhost kernel: 6 disabled
    Sep 27 19:47:22 localhost kernel: 7 disabled
    Sep 27 19:47:22 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Sep 27 19:47:22 localhost kernel: initial memory mapped : 0 - 20000000
    Sep 27 19:47:22 localhost kernel: Using GB pages for direct mapping
    Sep 27 19:47:22 localhost kernel: init_memory_mapping: 0000000000000000-000000006ffb0000
    Sep 27 19:47:22 localhost kernel: 0000000000 - 0040000000 page 1G
    Sep 27 19:47:22 localhost kernel: 0040000000 - 006fe00000 page 2M
    Sep 27 19:47:22 localhost kernel: 006fe00000 - 006ffb0000 page 4k
    Sep 27 19:47:22 localhost kernel: kernel direct mapping tables up to 6ffb0000 @ 16000-19000
    Sep 27 19:47:22 localhost kernel: RAMDISK: 37e5a000 - 37ff0000
    Sep 27 19:47:22 localhost kernel: ACPI: RSDP 00000000000f9580 00014 (v00 ACPIAM)
    Sep 27 19:47:22 localhost kernel: ACPI: RSDT 000000006ffb0000 0003C (v01 061209 RSDT1738 20090612 MSFT 00000097)
    Sep 27 19:47:22 localhost kernel: ACPI: FACP 000000006ffb0200 00084 (v01 061209 FACP1738 20090612 MSFT 00000097)
    Sep 27 19:47:22 localhost kernel: ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100702/tbfadt-557)
    Sep 27 19:47:22 localhost kernel: ACPI: DSDT 000000006ffb0440 0A5C4 (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
    Sep 27 19:47:22 localhost kernel: ACPI: FACS 000000006ffbe000 00040
    Sep 27 19:47:22 localhost kernel: ACPI: APIC 000000006ffb0390 0006C (v01 061209 APIC1738 20090612 MSFT 00000097)
    Sep 27 19:47:22 localhost kernel: ACPI: MCFG 000000006ffb0400 0003C (v01 061209 OEMMCFG 20090612 MSFT 00000097)
    Sep 27 19:47:22 localhost kernel: ACPI: OEMB 000000006ffbe040 00072 (v01 061209 OEMB1738 20090612 MSFT 00000097)
    Sep 27 19:47:22 localhost kernel: ACPI: HPET 000000006ffbaa10 00038 (v01 061209 OEMHPET 20090612 MSFT 00000097)
    Sep 27 19:47:22 localhost kernel: ACPI: SSDT 000000006ffbaa50 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
    Sep 27 19:47:22 localhost kernel: ACPI: Local APIC address 0xfee00000
    Sep 27 19:47:22 localhost kernel: [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880001e00000-ffff8800037fffff] on node 0
    Sep 27 19:47:22 localhost kernel: Zone PFN ranges:
    Sep 27 19:47:22 localhost kernel: DMA 0x00000010 -> 0x00001000
    Sep 27 19:47:22 localhost kernel: DMA32 0x00001000 -> 0x00100000
    Sep 27 19:47:22 localhost kernel: Normal empty
    Sep 27 19:47:22 localhost kernel: Movable zone start PFN for each node
    Sep 27 19:47:22 localhost kernel: early_node_map[2] active PFN ranges
    Sep 27 19:47:22 localhost kernel: 0: 0x00000010 -> 0x0000009f
    Sep 27 19:47:22 localhost kernel: 0: 0x00000100 -> 0x0006ffb0
    Sep 27 19:47:22 localhost kernel: On node 0 totalpages: 458559
    Sep 27 19:47:22 localhost kernel: DMA zone: 56 pages used for memmap
    Sep 27 19:47:22 localhost kernel: DMA zone: 0 pages reserved
    Sep 27 19:47:22 localhost kernel: DMA zone: 3927 pages, LIFO batch:0
    Sep 27 19:47:22 localhost kernel: DMA32 zone: 6215 pages used for memmap
    Sep 27 19:47:22 localhost kernel: DMA32 zone: 448361 pages, LIFO batch:31
    Sep 27 19:47:22 localhost kernel: ACPI: PM-Timer IO Port: 0x808
    Sep 27 19:47:22 localhost kernel: ACPI: Local APIC address 0xfee00000
    Sep 27 19:47:22 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Sep 27 19:47:22 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Sep 27 19:47:22 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Sep 27 19:47:22 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Sep 27 19:47:22 localhost kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    Sep 27 19:47:22 localhost kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    Sep 27 19:47:22 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Sep 27 19:47:22 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Sep 27 19:47:22 localhost kernel: ACPI: IRQ0 used by override.
    Sep 27 19:47:22 localhost kernel: ACPI: IRQ2 used by override.
    Sep 27 19:47:22 localhost kernel: ACPI: IRQ9 used by override.
    Sep 27 19:47:22 localhost kernel: Using ACPI (MADT) for SMP configuration information
    Sep 27 19:47:22 localhost kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
    Sep 27 19:47:22 localhost kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
    Sep 27 19:47:22 localhost kernel: nr_irqs_gsi: 40
    Sep 27 19:47:22 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Sep 27 19:47:22 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    Sep 27 19:47:22 localhost kernel: PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Sep 27 19:47:22 localhost kernel: Allocating PCI resources starting at 70000000 (gap: 70000000:8f700000)
    Sep 27 19:47:22 localhost kernel: early_res array is doubled to 64 at [18000 - 187ff]
    Sep 27 19:47:22 localhost kernel: setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
    Sep 27 19:47:22 localhost kernel: PERCPU: Embedded 26 pages/cpu @ffff880001600000 s77696 r8192 d20608 u524288
    Sep 27 19:47:22 localhost kernel: pcpu-alloc: s77696 r8192 d20608 u524288 alloc=1*2097152
    Sep 27 19:47:22 localhost kernel: pcpu-alloc: [0] 0 1 2 3
    Sep 27 19:47:22 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452288
    Sep 27 19:47:22 localhost kernel: Kernel command line: root=/dev/disk/by-uuid/6448e149-dad3-4aa2-ab86-a71b0ffbfae3 ro
    Sep 27 19:47:22 localhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Sep 27 19:47:22 localhost kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Sep 27 19:47:22 localhost kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Sep 27 19:47:22 localhost kernel: Checking aperture...
    Sep 27 19:47:22 localhost kernel: No AGP bridge found
    Sep 27 19:47:22 localhost kernel: Node 0: aperture @ 5b5a000000 size 32 MB
    Sep 27 19:47:22 localhost kernel: Aperture beyond 4GB. Ignoring.
    Sep 27 19:47:22 localhost kernel: Subtract (44 early reservations)
    Sep 27 19:47:22 localhost kernel: #1 [0001000000 - 000149e660] TEXT DATA BSS
    Sep 27 19:47:22 localhost kernel: #2 [0037e5a000 - 0037ff0000] RAMDISK
    Sep 27 19:47:22 localhost kernel: #3 [000009f000 - 0000100000] BIOS reserved
    Sep 27 19:47:22 localhost kernel: #4 [000149f000 - 000149f13f] BRK
    Sep 27 19:47:22 localhost kernel: #5 [0000010000 - 0000012000] TRAMPOLINE
    Sep 27 19:47:22 localhost kernel: #6 [0000012000 - 0000016000] ACPI WAKEUP
    Sep 27 19:47:22 localhost kernel: #7 [0000016000 - 0000018000] PGTABLE
    Sep 27 19:47:22 localhost kernel: #8 [000149f140 - 00014a0140] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #9 [000149e680 - 000149e760] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #10 [0001ca1000 - 0001ca2000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #11 [0001ca2000 - 0001ca3000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #12 [0001e00000 - 0003800000] MEMMAP 0
    Sep 27 19:47:22 localhost kernel: #13 [00014a0140 - 00014b8140] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #14 [00014b8140 - 00014d0140] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #15 [00014d1000 - 00014d2000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #16 [000149e780 - 000149e7c1] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #17 [000149e800 - 000149e843] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #18 [000149e880 - 000149ea78] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #19 [000149ea80 - 000149eae8] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #20 [000149eb00 - 000149eb68] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #21 [000149eb80 - 000149ebe8] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #22 [000149ec00 - 000149ec68] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #23 [000149ec80 - 000149ece8] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #24 [000149ed00 - 000149ed68] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #25 [000149ed80 - 000149ede8] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #26 [000149ee00 - 000149ee68] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #27 [000149ee80 - 000149eea0] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #28 [000149eec0 - 000149eeff] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #29 [000149ef00 - 000149ef3f] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #30 [0001600000 - 000161a000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #31 [0001680000 - 000169a000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #32 [0001700000 - 000171a000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #33 [0001780000 - 000179a000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #34 [000149ef40 - 000149ef48] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #35 [000149ef80 - 000149ef88] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #36 [000149efc0 - 000149efd0] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #37 [00014d0140 - 00014d0160] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #38 [00014d0180 - 00014d02b0] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #39 [00014d02c0 - 00014d0310] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #40 [00014d0340 - 00014d0390] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #41 [00014d2000 - 00014da000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #42 [000179a000 - 000199a000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: #43 [00014da000 - 00015da000] BOOTMEM
    Sep 27 19:47:22 localhost kernel: Memory: 1797492k/1834688k available (2549k kernel code, 452k absent, 36744k reserved, 1087k data, 376k init)
    Sep 27 19:47:22 localhost kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Sep 27 19:47:22 localhost kernel: Preemptable hierarchical RCU implementation.
    Sep 27 19:47:22 localhost kernel: RCU-based detection of stalled CPUs is disabled.
    Sep 27 19:47:22 localhost kernel: Verbose stalled-CPUs detection is disabled.
    Sep 27 19:47:22 localhost kernel: NR_IRQS:384
    Sep 27 19:47:22 localhost kernel: Console: colour VGA+ 80x25
    Sep 27 19:47:22 localhost kernel: console [tty0] enabled
    Sep 27 19:47:22 localhost kernel: hpet clockevent registered
    Sep 27 19:47:22 localhost kernel: Fast TSC calibration using PIT
    Sep 27 19:47:22 localhost kernel: Detected 2999.782 MHz processor.
    Sep 27 19:47:22 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.55 BogoMIPS (lpj=2999778)
    Sep 27 19:47:22 localhost kernel: pid_max: default: 32768 minimum: 301
    Sep 27 19:47:22 localhost kernel: Mount-cache hash table entries: 256
    Sep 27 19:47:22 localhost kernel: tseg: 0000000000
    Sep 27 19:47:22 localhost kernel: CPU: Physical Processor ID: 0
    Sep 27 19:47:22 localhost kernel: CPU: Processor Core ID: 0
    Sep 27 19:47:22 localhost kernel: mce: CPU supports 6 MCE banks
    Sep 27 19:47:22 localhost kernel: using C1E aware idle routine
    Sep 27 19:47:22 localhost kernel: Performance Events: AMD PMU driver.
    Sep 27 19:47:22 localhost kernel: ... version: 0
    Sep 27 19:47:22 localhost kernel: ... bit width: 48
    Sep 27 19:47:22 localhost kernel: ... generic registers: 4
    Sep 27 19:47:22 localhost kernel: ... value mask: 0000ffffffffffff
    Sep 27 19:47:22 localhost kernel: ... max period: 00007fffffffffff
    Sep 27 19:47:22 localhost kernel: ... fixed-purpose events: 0
    Sep 27 19:47:22 localhost kernel: ... event mask: 000000000000000f
    Sep 27 19:47:22 localhost kernel: ACPI: Core revision 20100702
    Sep 27 19:47:22 localhost kernel: Setting APIC routing to flat
    Sep 27 19:47:22 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Sep 27 19:47:22 localhost kernel: CPU0: AMD Phenom(tm) II X4 945 Processor stepping 02
    Sep 27 19:47:22 localhost kernel: Booting Node 0, Processors #1 #2 #3 Ok.
    Sep 27 19:47:22 localhost kernel: Brought up 4 CPUs
    Sep 27 19:47:22 localhost kernel: Total of 4 processors activated (24000.70 BogoMIPS).
    Sep 27 19:47:22 localhost kernel: devtmpfs: initialized
    Sep 27 19:47:22 localhost kernel: atomic64 test passed for x86-64 platform with CX8 and with SSE
    Sep 27 19:47:22 localhost kernel: NET: Registered protocol family 16
    Sep 27 19:47:22 localhost kernel: node 0 link 0: io port [1000, ffffff]
    Sep 27 19:47:22 localhost kernel: TOM: 0000000080000000 aka 2048M
    Sep 27 19:47:22 localhost kernel: Fam 10h mmconf [e0000000, efffffff]
    Sep 27 19:47:22 localhost kernel: node 0 link 0: mmio [a0000, bffff]
    Sep 27 19:47:22 localhost kernel: node 0 link 0: mmio [80000000, cfffffff]
    Sep 27 19:47:22 localhost kernel: node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
    Sep 27 19:47:22 localhost kernel: node 0 link 0: mmio [f0000000, fe7fffff]
    Sep 27 19:47:22 localhost kernel: node 0 link 0: mmio [fe800000, fe9fffff]
    Sep 27 19:47:22 localhost kernel: node 0 link 0: mmio [fea00000, ffefffff]
    Sep 27 19:47:22 localhost kernel: bus: [00, 07] on node 0 link 0
    Sep 27 19:47:22 localhost kernel: bus: 00 index 0 [io 0x0000-0xffff]
    Sep 27 19:47:22 localhost kernel: bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    Sep 27 19:47:22 localhost kernel: bus: 00 index 2 [mem 0x80000000-0xdfffffff]
    Sep 27 19:47:22 localhost kernel: bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
    Sep 27 19:47:22 localhost kernel: ACPI: bus type pci registered
    Sep 27 19:47:22 localhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Sep 27 19:47:22 localhost kernel: PCI: not using MMCONFIG
    Sep 27 19:47:22 localhost kernel: PCI: Using configuration type 1 for base access
    Sep 27 19:47:22 localhost kernel: PCI: Using configuration type 1 for extended access
    Sep 27 19:47:22 localhost kernel: bio: create slab <bio-0> at 0
    Sep 27 19:47:22 localhost kernel: ACPI: EC: Look up EC in DSDT
    Sep 27 19:47:22 localhost kernel: ACPI: Executed 4 blocks of module-level executable AML code
    Sep 27 19:47:22 localhost kernel: ACPI: Interpreter enabled
    Sep 27 19:47:22 localhost kernel: ACPI: (supports S0 S3 S4 S5)
    Sep 27 19:47:22 localhost kernel: ACPI: Using IOAPIC for interrupt routing
    Sep 27 19:47:22 localhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Sep 27 19:47:22 localhost kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Sep 27 19:47:22 localhost kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Sep 27 19:47:22 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Sep 27 19:47:22 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Sep 27 19:47:22 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Sep 27 19:47:22 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Sep 27 19:47:22 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff]
    Sep 27 19:47:22 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: reg 24: [mem 0xfe7ffc00-0xfe7fffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Sep 27 19:47:22 localhost kernel: pci 0000:00:12.0: reg 10: [mem 0xfe7fe000-0xfe7fefff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:12.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:12.2: reg 10: [mem 0xfe7ff800-0xfe7ff8ff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:12.2: supports D1 D2
    Sep 27 19:47:22 localhost kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Sep 27 19:47:22 localhost kernel: pci 0000:00:12.2: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:00:13.0: reg 10: [mem 0xfe7fc000-0xfe7fcfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:13.1: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:13.2: reg 10: [mem 0xfe7ff400-0xfe7ff4ff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:13.2: supports D1 D2
    Sep 27 19:47:22 localhost kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    Sep 27 19:47:22 localhost kernel: pci 0000:00:13.2: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.2: reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.2: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.5: reg 10: [mem 0xfe7fa000-0xfe7fafff]
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.0: reg 14: [io 0xb000-0xb0ff]
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.0: reg 24: [mem 0xfe800000-0xfe8fffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.0: supports D1 D2
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.1: reg 10: [mem 0xfe9e8000-0xfe9ebfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.1: supports D1 D2
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: reg 20: [mem 0xfdff0000-0xfdffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: supports D1 D2
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Sep 27 19:47:22 localhost kernel: pci 0000:02:00.0: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: PCI bridge to [bus 02-02]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.0: reg 24: [mem 0xfebfe000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.0: PME# supported from D3hot
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.0: PME# disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.1: reg 10: [io 0xe800-0xe807]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.1: reg 14: [io 0xe400-0xe403]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.1: reg 18: [io 0xe000-0xe007]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.1: reg 1c: [io 0xd800-0xd803]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
    Sep 27 19:47:22 localhost kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: PCI bridge to [bus 03-03]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: bridge window [io 0xd000-0xefff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: on NUMA node 0
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 12 14 15) *0, disabled.
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 12 14 15) *0, disabled.
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
    Sep 27 19:47:22 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 12 14 15) *0, disabled.
    Sep 27 19:47:22 localhost kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    Sep 27 19:47:22 localhost kernel: vgaarb: loaded
    Sep 27 19:47:22 localhost kernel: PCI: Using ACPI for IRQ routing
    Sep 27 19:47:22 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
    Sep 27 19:47:22 localhost kernel: reserve RAM buffer: 000000000009f000 - 000000000009ffff
    Sep 27 19:47:22 localhost kernel: reserve RAM buffer: 000000006ffb0000 - 000000006fffffff
    Sep 27 19:47:22 localhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    Sep 27 19:47:22 localhost kernel: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    Sep 27 19:47:22 localhost kernel: Switching to clocksource tsc
    Sep 27 19:47:22 localhost kernel: pnp: PnP ACPI init
    Sep 27 19:47:22 localhost kernel: ACPI: bus type pnp registered
    Sep 27 19:47:22 localhost kernel: pnp: PnP ACPI: found 13 devices
    Sep 27 19:47:22 localhost kernel: ACPI: ACPI bus type pnp unregistered
    Sep 27 19:47:22 localhost kernel: system 00:01: [mem 0x70000000-0x7fffffff] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
    Sep 27 19:47:22 localhost kernel: system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x04d0-0x04d1] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x040b] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x04d6] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0c00-0x0c01] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0c14] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0c50-0x0c51] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0c52] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0c6c] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0c6f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0cd0-0x0cd1] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0cd2-0x0cd3] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0cd4-0x0cd5] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0cd6-0x0cd7] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0cd8-0x0cdf] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0800-0x089f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0b00-0x0b0f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0b20-0x0b3f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0900-0x090f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0x0910-0x091f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [io 0xfe00-0xfefe] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0a: [io 0x0e00-0x0e0f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0a: [io 0x0e80-0x0e8f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0a: [io 0x0f40-0x0f4f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0a: [io 0x0a30-0x0a3f] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    Sep 27 19:47:22 localhost kernel: system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
    Sep 27 19:47:22 localhost kernel: system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    Sep 27 19:47:22 localhost kernel: system 00:0c: [mem 0x00100000-0x6fffffff] could not be reserved
    Sep 27 19:47:22 localhost kernel: system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: PCI bridge to [bus 02-02]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: PCI bridge to [bus 03-03]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: bridge window [io 0xd000-0xefff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: bridge window [mem pref disabled]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 04-04]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [io disabled]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem disabled]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:14.4: bridge window [mem pref disabled]
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Sep 27 19:47:22 localhost kernel: pci 0000:00:06.0: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    Sep 27 19:47:22 localhost kernel: pci 0000:00:07.0: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:04: resource 8 [mem 0x70000000-0xdfffffff]
    Sep 27 19:47:22 localhost kernel: pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
    Sep 27 19:47:22 localhost kernel: NET: Registered protocol family 2
    Sep 27 19:47:22 localhost kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    Sep 27 19:47:22 localhost kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    Sep 27 19:47:22 localhost kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Sep 27 19:47:22 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536)
    Sep 27 19:47:22 localhost kernel: TCP reno registered
    Sep 27 19:47:22 localhost kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
    Sep 27 19:47:22 localhost kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    Sep 27 19:47:22 localhost kernel: NET: Registered protocol family 1
    Sep 27 19:47:22 localhost kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    Sep 27 19:47:22 localhost kernel: pci 0000:01:05.0: Boot video device
    Sep 27 19:47:22 localhost kernel: PCI: CLS 64 bytes, default 64
    Sep 27 19:47:22 localhost kernel: Unpacking initramfs...
    Sep 27 19:47:22 localhost kernel: Freeing initrd memory: 1624k freed
    Sep 27 19:47:22 localhost kernel: VFS: Disk quotas dquot_6.5.2
    Sep 27 19:47:22 localhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Sep 27 19:47:22 localhost kernel: msgmni has been set to 3513
    Sep 27 19:47:22 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    Sep 27 19:47:22 localhost kernel: io scheduler noop registered
    Sep 27 19:47:22 localhost kernel: io scheduler cfq registered (default)
    Sep 27 19:47:22 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Sep 27 19:47:22 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    Sep 27 19:47:22 localhost kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    Sep 27 19:47:22 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Sep 27 19:47:22 localhost kernel: mice: PS/2 mouse device common for all mice
    Sep 27 19:47:22 localhost kernel: cpuidle: using governor ladder
    Sep 27 19:47:22 localhost kernel: cpuidle: using governor menu
    Sep 27 19:47:22 localhost kernel: TCP cubic registered
    Sep 27 19:47:22 localhost kernel: PM: Resume from disk failed.
    Sep 27 19:47:22 localhost kernel: Freeing unused kernel memory: 376k freed
    Sep 27 19:47:22 localhost kernel: udev[35]: starting version 162
    Sep 27 19:47:22 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Sep 27 19:47:22 localhost kernel: SCSI subsystem initialized
    Sep 27 19:47:22 localhost kernel: libata version 3.00 loaded.
    Sep 27 19:47:22 localhost kernel: pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Sep 27 19:47:22 localhost kernel: pata_acpi 0000:00:14.1: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Sep 27 19:47:22 localhost kernel: pata_acpi 0000:03:00.1: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: pata_acpi 0000:03:00.1: PCI INT B disabled
    Sep 27 19:47:22 localhost kernel: ahci 0000:00:11.0: version 3.0
    Sep 27 19:47:22 localhost kernel: ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Sep 27 19:47:22 localhost kernel: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    Sep 27 19:47:22 localhost kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    Sep 27 19:47:22 localhost kernel: pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Sep 27 19:47:22 localhost kernel: pata_jmicron 0000:03:00.1: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: scsi1 : pata_jmicron
    Sep 27 19:47:22 localhost kernel: scsi0 : ahci
    Sep 27 19:47:22 localhost kernel: scsi2 : pata_jmicron
    Sep 27 19:47:22 localhost kernel: ata5: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 16
    Sep 27 19:47:22 localhost kernel: ata6: PATA max UDMA/100 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 16
    Sep 27 19:47:22 localhost kernel: scsi3 : ahci
    Sep 27 19:47:22 localhost kernel: scsi4 : ahci
    Sep 27 19:47:22 localhost kernel: scsi5 : ahci
    Sep 27 19:47:22 localhost kernel: ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
    Sep 27 19:47:22 localhost kernel: ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
    Sep 27 19:47:22 localhost kernel: ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
    Sep 27 19:47:22 localhost kernel: ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
    Sep 27 19:47:22 localhost kernel: ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    Sep 27 19:47:22 localhost kernel: ahci 0000:03:00.0: JMB361 has only one port
    Sep 27 19:47:22 localhost kernel: ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
    Sep 27 19:47:22 localhost kernel: scsi6 : pata_atiixp
    Sep 27 19:47:22 localhost kernel: scsi7 : pata_atiixp
    Sep 27 19:47:22 localhost kernel: ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    Sep 27 19:47:22 localhost kernel: ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    Sep 27 19:47:22 localhost kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
    Sep 27 19:47:22 localhost kernel: ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio
    Sep 27 19:47:22 localhost kernel: ahci 0000:03:00.0: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: scsi8 : ahci
    Sep 27 19:47:22 localhost kernel: scsi9 : ahci
    Sep 27 19:47:22 localhost kernel: ata9: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 19
    Sep 27 19:47:22 localhost kernel: ata10: DUMMY
    Sep 27 19:47:22 localhost kernel: ata8.00: ATA-7: HDS728080PLAT20, PF2OA27A, max UDMA/133
    Sep 27 19:47:22 localhost kernel: ata8.00: 156250000 sectors, multi 16: LBA48
    Sep 27 19:47:22 localhost kernel: ata8.01: ATAPI: HL-DT-ST GCE-8523B, 1.01, max UDMA/33
    Sep 27 19:47:22 localhost kernel: ata8.00: limited to UDMA/33 due to 40-wire cable
    Sep 27 19:47:22 localhost kernel: ata8.00: configured for UDMA/33
    Sep 27 19:47:22 localhost kernel: ata8.01: configured for UDMA/33
    Sep 27 19:47:22 localhost kernel: ata1: SATA link down (SStatus 0 SControl 300)
    Sep 27 19:47:22 localhost kernel: ata4: SATA link down (SStatus 0 SControl 300)
    Sep 27 19:47:22 localhost kernel: ata3: SATA link down (SStatus 0 SControl 300)
    Sep 27 19:47:22 localhost kernel: ata9: SATA link down (SStatus 0 SControl 300)
    Sep 27 19:47:22 localhost kernel: ata2: softreset failed (device not ready)
    Sep 27 19:47:22 localhost kernel: ata2: applying SB600 PMP SRST workaround and retrying
    Sep 27 19:47:22 localhost kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Sep 27 19:47:22 localhost kernel: ata2.00: ATA-8: ST3250318AS, CC38, max UDMA/133
    Sep 27 19:47:22 localhost kernel: ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    Sep 27 19:47:22 localhost kernel: ata2.00: configured for UDMA/133
    Sep 27 19:47:22 localhost kernel: scsi 3:0:0:0: Direct-Access ATA ST3250318AS CC38 PQ: 0 ANSI: 5
    Sep 27 19:47:22 localhost kernel: scsi 7:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
    Sep 27 19:47:22 localhost kernel: scsi 7:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8523B 1.01 PQ: 0 ANSI: 5
    Sep 27 19:47:22 localhost kernel: sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    Sep 27 19:47:22 localhost kernel: sd 7:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
    Sep 27 19:47:22 localhost kernel: sd 3:0:0:0: [sda] Write Protect is off
    Sep 27 19:47:22 localhost kernel: sd 7:0:0:0: [sdb] Write Protect is off
    Sep 27 19:47:22 localhost kernel: sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    Sep 27 19:47:22 localhost kernel: sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Sep 27 19:47:22 localhost kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Sep 27 19:47:22 localhost kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Sep 27 19:47:22 localhost kernel: sdb: sdb1
    Sep 27 19:47:22 localhost kernel: sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
    Sep 27 19:47:22 localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Sep 27 19:47:22 localhost kernel: sr 7:0:1:0: Attached scsi CD-ROM sr0
    Sep 27 19:47:22 localhost kernel: sd 7:0:0:0: [sdb] Attached SCSI disk
    Sep 27 19:47:22 localhost kernel: sda: sda1 sda2 < sda5 > sda3
    Sep 27 19:47:22 localhost kernel: sd 3:0:0:0: [sda] Attached SCSI disk
    Sep 27 19:47:22 localhost kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Sep 27 19:47:22 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
    Sep 27 19:47:22 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    Sep 27 19:47:22 localhost kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    Sep 27 19:47:22 localhost kernel: udev[860]: starting version 162
    Sep 27 19:47:22 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
    Sep 27 19:47:22 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    Sep 27 19:47:22 localhost kernel: ACPI: Power Button [PWRB]
    Sep 27 19:47:22 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    Sep 27 19:47:22 localhost kernel: ACPI: Power Button [PWRF]
    Sep 27 19:47:22 localhost kernel: usbcore: registered new interface driver usbfs
    Sep 27 19:47:22 localhost kernel: usbcore: registered new interface driver hub
    Sep 27 19:47:22 localhost kernel: usbcore: registered new device driver usb
    Sep 27 19:47:22 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: EHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: debug port 1
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Sep 27 19:47:22 localhost kernel: hub 1-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 1-0:1.0: 6 ports detected
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: EHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: debug port 1
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
    Sep 27 19:47:22 localhost kernel: sd 3:0:0:0: Attached scsi generic sg0 type 0
    Sep 27 19:47:22 localhost kernel: sd 7:0:0:0: Attached scsi generic sg1 type 0
    Sep 27 19:47:22 localhost kernel: sr 7:0:1:0: Attached scsi generic sg2 type 5
    Sep 27 19:47:22 localhost kernel: ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    Sep 27 19:47:22 localhost kernel: hub 2-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 2-0:1.0: 6 ports detected
    Sep 27 19:47:22 localhost kernel: EDAC MC: Ver: 2.1.0 Sep 27 2010
    Sep 27 19:47:22 localhost kernel: EDAC amd64_edac: Ver: 3.3.0 Sep 27 2010
    Sep 27 19:47:22 localhost kernel: EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
    Sep 27 19:47:22 localhost kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Sep 27 19:47:22 localhost kernel: Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    Sep 27 19:47:22 localhost kernel: (Note that use of the override may cause unknown side effects.)
    Sep 27 19:47:22 localhost kernel: amd64_edac: probe of 0000:00:18.2 failed with error -22
    Sep 27 19:47:22 localhost kernel: ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [dma 2816-2831 64bit]
    Sep 27 19:47:22 localhost kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Sep 27 19:47:22 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Sep 27 19:47:22 localhost kernel: shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
    Sep 27 19:47:22 localhost kernel: shpchp 0000:00:01.0: Cannot reserve MMIO region
    Sep 27 19:47:22 localhost kernel: shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 9606 ss_vid 1019 ss_did 2617
    Sep 27 19:47:22 localhost kernel: shpchp 0000:00:06.0: Cannot reserve MMIO region
    Sep 27 19:47:22 localhost kernel: shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 9607 ss_vid 1019 ss_did 2617
    Sep 27 19:47:22 localhost kernel: shpchp 0000:00:07.0: Cannot reserve MMIO region
    Sep 27 19:47:22 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Sep 27 19:47:22 localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.0: OHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
    Sep 27 19:47:22 localhost kernel: hub 3-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 3-0:1.0: 3 ports detected
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.1: OHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
    Sep 27 19:47:22 localhost kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    Sep 27 19:47:22 localhost kernel: r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Sep 27 19:47:22 localhost kernel: r8169 0000:02:00.0: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: r8169 0000:02:00.0: irq 40 for MSI/MSI-X
    Sep 27 19:47:22 localhost kernel: r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90010664000, 00:25:11:d8:32:b7, XID 1c4000c0 IRQ 40
    Sep 27 19:47:22 localhost kernel: hub 4-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 4-0:1.0: 3 ports detected
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.0: OHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
    Sep 27 19:47:22 localhost kernel: hub 5-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 5-0:1.0: 3 ports detected
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.1: OHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
    Sep 27 19:47:22 localhost kernel: hub 6-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 6-0:1.0: 3 ports detected
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:14.5: OHCI Host Controller
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    Sep 27 19:47:22 localhost kernel: ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
    Sep 27 19:47:22 localhost kernel: thermal LNXTHERM:01: registered as thermal_zone0
    Sep 27 19:47:22 localhost kernel: ACPI: Thermal Zone [THRM] (30 C)
    Sep 27 19:47:22 localhost kernel: ACPI: acpi_idle registered with cpuidle
    Sep 27 19:47:22 localhost kernel: hub 7-0:1.0: USB hub found
    Sep 27 19:47:22 localhost kernel: hub 7-0:1.0: 2 ports detected
    Sep 27 19:47:22 localhost kernel: HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Sep 27 19:47:22 localhost kernel: hda_codec: ALC888: BIOS auto-probing.
    Sep 27 19:47:22 localhost kernel: HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Sep 27 19:47:22 localhost kernel: HDA Intel 0000:01:05.1: setting latency timer to 64
    Sep 27 19:47:22 localhost kernel: usb 6-2: new low speed USB device using ohci_hcd and address 2
    Sep 27 19:47:22 localhost kernel: usbcore: registered new interface driver hiddev
    Sep 27 19:47:22 localhost kernel: input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input4
    Sep 27 19:47:22 localhost kernel: generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2/input0
    Sep 27 19:47:22 localhost kernel: usbcore: registered new interface driver usbhid
    Sep 27 19:47:22 localhost kernel: usbhid: USB HID core driver
    Sep 27 19:47:22 localhost kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
    Sep 27 19:47:22 localhost kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
    Sep 27 19:47:22 localhost kernel: EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    Sep 27 19:47:22 localhost kernel: fuse init (API version 7.15)
    Sep 27 19:47:22 localhost kernel: Adding 337328k swap on /dev/sda5. Priority:-1 extents:1 across:337328k
    Sep 27 19:47:23 localhost kernel: r8169 0000:02:00.0: eth0: link up
    Sep 27 19:47:23 localhost kernel: r8169 0000:02:00.0: eth0: link up
    Sep 27 19:47:24 localhost kernel: NET: Registered protocol family 10
    Sep 27 19:47:24 localhost kernel: lo: Disabled Privacy Extensions
    Sep 27 19:47:24 localhost kernel: NET: Registered protocol family 17
    Sep 27 19:47:25 localhost kernel: pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Sep 27 19:47:25 localhost kernel: Linux agpgart interface v0.103
    Sep 27 19:47:25 localhost kernel: [drm] Initialized drm 1.1.0 20060810
    Sep 27 19:47:25 localhost kernel: [drm] radeon defaulting to userspace modesetting.
    Sep 27 19:47:25 localhost kernel: pci 0000:01:05.0: setting latency timer to 64
    Sep 27 19:47:25 localhost kernel: [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
    Sep 27 19:47:25 localhost kernel: [drm] Setting GART location based on new memory map
    Sep 27 19:47:25 localhost kernel: [drm] Loading RS780 CP Microcode
    Sep 27 19:47:25 localhost kernel: [drm] Resetting GPU
    Sep 27 19:47:25 localhost kernel: [drm] writeback test succeeded in 1 usecs
    Sep 27 19:47:29 localhost kernel: r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors!
    Sep 27 19:47:34 localhost kernel: eth0: no IPv6 routers present
    Sep 27 19:52:54 localhost kernel: start_kdeinit (2066): /proc/2066/oom_adj is deprecated, please use /proc/2066/oom_score_adj instead.
    Sep 27 20:17:35 localhost kernel: [drm] Resetting GPU
    Sep 27 20:17:35 localhost kernel: [drm] Setting GART location based on new memory map
    Sep 27 20:17:35 localhost kernel: [drm] Loading RS780 CP Microcode
    Sep 27 20:17:35 localhost kernel: [drm] Resetting GPU
    Sep 27 20:17:35 localhost kernel: [drm] writeback test succeeded in 1 usecs
    and the ps ouput for compare the memory usage of 2.6.36-rc5
    PID PPID RSS VSZ %CPU %MEM CMD
    1 0 612 3896 0.0 0.0 init [3]
    2 0 0 0 0.0 0.0 [kthreadd]
    3 2 0 0 0.0 0.0 [ksoftirqd/0]
    4 2 0 0 0.0 0.0 [kworker/0:0]
    6 2 0 0 0.0 0.0 [migration/0]
    7 2 0 0 0.0 0.0 [migration/1]
    9 2 0 0 0.0 0.0 [ksoftirqd/1]
    10 2 0 0 0.0 0.0 [kworker/0:1]
    11 2 0 0 0.0 0.0 [migration/2]
    12 2 0 0 0.0 0.0 [kworker/2:0]
    13 2 0 0 0.0 0.0 [ksoftirqd/2]
    14 2 0 0 0.0 0.0 [migration/3]
    15 2 0 0 0.0 0.0 [kworker/3:0]
    16 2 0 0 0.0 0.0 [ksoftirqd/3]
    17 2 0 0 0.0 0.0 [khelper]
    18 2 0 0 0.0 0.0 [pm]
    19 2 0 0 0.0 0.0 [sync_supers]
    20 2 0 0 0.0 0.0 [bdi-default]
    21 2 0 0 0.0 0.0 [kblockd]
    22 2 0 0 0.0 0.0 [kacpid]
    23 2 0 0 0.0 0.0 [kacpi_notify]
    24 2 0 0 0.0 0.0 [kacpi_hotplug]
    25 2 0 0 0.0 0.0 [kseriod]
    26 2 0 0 0.0 0.0 [kswapd0]
    27 2 0 0 0.0 0.0 [fsnotify_mark]
    28 2 0 0 0.0 0.0 [aio]
    598 2 0 0 0.0 0.0 [ata_sff]
    645 2 0 0 0.0 0.0 [scsi_eh_0]
    650 2 0 0 0.0 0.0 [scsi_eh_1]
    657 2 0 0 0.0 0.0 [scsi_eh_2]
    658 2 0 0 0.0 0.0 [scsi_eh_3]
    674 2 0 0 0.0 0.0 [scsi_eh_4]
    684 2 0 0 0.0 0.0 [scsi_eh_5]
    696 2 0 0 0.0 0.0 [scsi_eh_6]
    710 2 0 0 0.0 0.0 [scsi_eh_7]
    732 2 0 0 0.0 0.0 [kworker/u:8]
    764 2 0 0 0.0 0.0 [scsi_eh_8]
    765 2 0 0 0.0 0.0 [scsi_eh_9]
    766 2 0 0 0.0 0.0 [kworker/u:9]
    768 2 0 0 0.0 0.0 [kworker/1:1]
    769 2 0 0 0.0 0.0 [kworker/3:1]
    771 2 0 0 0.0 0.0 [kworker/2:1]
    827 2 0 0 0.0 0.0 [jbd2/sda1-8]
    828 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    860 1 984 6348 0.0 0.0 /sbin/udevd --daemon
    1259 2 0 0 0.0 0.0 [khubd]
    1281 2 0 0 0.0 0.0 [edac-poller]
    1308 2 0 0 0.0 0.0 [hd-audio0]
    1311 2 0 0 0.0 0.0 [hd-audio1]
    1475 2 0 0 0.0 0.0 [usbhid_resumer]
    1508 2 0 0 0.0 0.0 [flush-8:0]
    1512 2 0 0 0.0 0.0 [jbd2/sdb1-8]
    1513 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    1520 1 864 15300 0.0 0.0 /sbin/mount.ntfs-3g /dev/sda3 /media/windows -o rw
    1763 1 540 26144 0.0 0.0 supervising syslog-ng
    1764 1763 2088 28516 0.0 0.1 /usr/sbin/syslog-ng
    1778 1 1168 13156 0.0 0.0 /usr/bin/dbus-daemon --system
    1781 1 5308 38832 0.0 0.2 /usr/sbin/hald
    1782 1781 1292 22288 0.0 0.0 hald-runner
    1811 1782 1132 24404 0.0 0.0 hald-addon-input: Listening on /dev/input/event0 /dev/input/event2 /dev/input/event3
    1825 1782 1136 24400 0.0 0.0 hald-addon-storage: polling /dev/sr0 (every 2 sec)
    1861 1 660 5992 0.0 0.0 /usr/sbin/crond -S -l info
    1870 1782 1120 19896 0.0 0.0 hald-addon-acpi: listening on acpi kernel interface /proc/acpi/event
    1875 860 900 6344 0.0 0.0 /sbin/udevd --daemon
    1877 1 580 6136 0.0 0.0 /usr/sbin/dnsmasq
    1879 1 776 28732 0.0 0.0 /usr/bin/kdm
    1883 1 576 3892 0.0 0.0 /sbin/agetty -8 38400 tty1 linux
    1884 1 572 3892 0.0 0.0 /sbin/agetty -8 38400 tty2 linux
    1885 1 572 3892 0.0 0.0 /sbin/agetty -8 38400 tty3 linux
    1886 1 576 3892 0.0 0.0 /sbin/agetty -8 38400 tty4 linux
    1887 1 576 3892 0.0 0.0 /sbin/agetty -8 38400 tty5 linux
    1888 1 572 3892 0.0 0.0 /sbin/agetty -8 38400 tty6 linux
    1934 1 352 8204 0.0 0.0 /sbin/dhcpcd -q eth0
    1944 1 3252 118404 0.0 0.1 /usr/sbin/console-kit-daemon --no-daemon
    2043 1 564 16760 0.0 0.0 /usr/bin/gpg-agent --daemon --pinentry-program /usr/bin/pinentry-qt4
    2046 1 520 14180 0.0 0.0 /usr/bin/ssh-agent -s
    2079 2 0 0 0.0 0.0 [kworker/1:2]
    2117 1 3336 45120 0.0 0.1 /usr/lib/polkit-1/polkitd
    2453 1879 50424 173688 2.9 2.8 /usr/bin/X :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-eMwXNb
    2457 860 828 6344 0.0 0.0 /sbin/udevd --daemon
    2463 2 0 0 0.0 0.0 [kworker/0:2]
    2464 1879 1824 45476 0.0 0.1 -:0
    2469 1 792 19844 0.0 0.0 dbus-launch --autolaunch 1b3de153c5d2d7ad7915eeec00000a16 --binary-syntax --close-stderr
    2470 1 624 12764 0.0 0.0 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    2484 2464 1696 15148 0.0 0.0 /bin/sh /usr/bin/startkde
    2511 1 564 16760 0.0 0.0 /usr/bin/gpg-agent --daemon --pinentry-program /usr/bin/pinentry-qt4
    2514 1 520 14180 0.0 0.0 /usr/bin/ssh-agent -s
    2528 1 800 19844 0.0 0.0 dbus-launch --sh-syntax --exit-with-session
    2529 1 1388 13408 0.1 0.0 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    2536 1 76 3740 0.0 0.0 /usr/lib/kde4/libexec/start_kdeinit +kcminit_startup
    2537 1 17828 228556 0.1 0.9 kdeinit4: kdeinit4 Running...
    2538 2537 9508 234956 0.0 0.5 kdeinit4: klauncher [kdeinit] --fd=9
    2540 1 21500 458464 0.3 1.1 kdeinit4: kded4 [kdeinit]
    2547 2 0 0 0.0 0.0 [kworker/1:0]
    2549 1 17240 338940 0.4 0.9 kdeinit4: kglobalaccel [kdeinit]
    2552 2484 292 3876 0.0 0.0 kwrapper4 ksmserver
    2553 2537 18004 421228 0.1 1.0 kdeinit4: ksmserver [kdeinit]
    2555 2553 42020 524068 0.9 2.3 kwin
    2559 1 48428 597456 2.1 2.6 kdeinit4: plasma-desktop [kdeinit]
    2561 1 26876 553388 0.3 1.4 /usr/bin/knotify4
    2564 1 15460 262712 0.0 0.8 /usr/bin/kuiserver
    2566 2537 9632 235728 0.0 0.5 kdeinit4: kio_trash [kdeinit] trash local:/tmp/ksocket-slack/klauncherMT2538.slave-socket local:/tmp/ksocket
    2569 1 16180 340100 0.0 0.8 kdeinit4: kaccess [kdeinit]
    2575 1 40908 518812 0.5 2.2 kdeinit4: krunner [kdeinit]
    2576 2537 9640 131904 0.0 0.5 /usr/bin/kwrited
    2580 1 28720 433816 0.4 1.5 kdeinit4: kmix [kdeinit]
    2582 1 16604 282464 0.0 0.9 /usr/lib/kde4/libexec/polkit-kde-authentication-agent-1
    2583 1 17800 340888 0.1 0.9 kdeinit4: klipper [kdeinit]
    2585 1 29940 368480 0.6 1.6 kdeinit4: konsole [kdeinit]
    2592 2585 5148 33164 0.2 0.2 /bin/zsh
    2593 2537 9632 235728 0.0 0.5 kdeinit4: kio_trash [kdeinit] trash local:/tmp/ksocket-slack/klauncherMT2538.slave-socket local:/tmp/ksocket
    2605 2592 864 10148 0.0 0.0 ps -eo pid,ppid,rss,vsize,pcpu,pmem,cmd -ww --sort=pid
    and from 2.6.34.2
    PID PPID RSS VSZ %CPU %MEM CMD
    1 0 612 3892 0.5 0.0 init [3]
    2 0 0 0 0.0 0.0 [kthreadd]
    3 2 0 0 0.0 0.0 [migration/0]
    4 2 0 0 0.0 0.0 [ksoftirqd/0]
    5 2 0 0 0.0 0.0 [migration/1]
    6 2 0 0 0.0 0.0 [ksoftirqd/1]
    7 2 0 0 0.0 0.0 [migration/2]
    8 2 0 0 0.0 0.0 [ksoftirqd/2]
    9 2 0 0 0.0 0.0 [migration/3]
    10 2 0 0 0.0 0.0 [ksoftirqd/3]
    11 2 0 0 0.0 0.0 [events/0]
    12 2 0 0 0.0 0.0 [events/1]
    13 2 0 0 0.0 0.0 [events/2]
    14 2 0 0 0.0 0.0 [events/3]
    15 2 0 0 0.0 0.0 [khelper]
    16 2 0 0 0.0 0.0 [async/mgr]
    17 2 0 0 0.0 0.0 [pm]
    18 2 0 0 0.0 0.0 [sync_supers]
    19 2 0 0 0.0 0.0 [bdi-default]
    20 2 0 0 0.0 0.0 [kblockd/0]
    21 2 0 0 0.0 0.0 [kblockd/1]
    22 2 0 0 0.0 0.0 [kblockd/2]
    23 2 0 0 0.0 0.0 [kblockd/3]
    24 2 0 0 0.0 0.0 [kacpid]
    25 2 0 0 0.0 0.0 [kacpi_notify]
    26 2 0 0 0.0 0.0 [kacpi_hotplug]
    27 2 0 0 0.0 0.0 [kseriod]
    32 2 0 0 0.0 0.0 [kswapd0]
    33 2 0 0 0.0 0.0 [aio/0]
    34 2 0 0 0.0 0.0 [aio/1]
    35 2 0 0 0.0 0.0 [aio/2]
    36 2 0 0 0.0 0.0 [aio/3]
    406 2 0 0 0.0 0.0 [ata/0]
    487 2 0 0 0.0 0.0 [ata/1]
    537 2 0 0 0.0 0.0 [ata/2]
    565 2 0 0 0.0 0.0 [ata/3]
    604 2 0 0 0.0 0.0 [ata_aux]
    632 2 0 0 0.0 0.0 [scsi_eh_0]
    633 2 0 0 0.0 0.0 [scsi_eh_1]
    641 2 0 0 0.0 0.0 [scsi_eh_2]
    653 2 0 0 0.0 0.0 [scsi_eh_3]
    654 2 0 0 0.0 0.0 [scsi_eh_4]
    658 2 0 0 0.0 0.0 [scsi_eh_5]
    756 2 0 0 0.0 0.0 [scsi_eh_6]
    757 2 0 0 0.0 0.0 [scsi_eh_7]
    768 2 0 0 0.0 0.0 [scsi_eh_8]
    770 2 0 0 0.0 0.0 [scsi_eh_9]
    812 2 0 0 0.0 0.0 [jbd2/sda1-8]
    813 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    814 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    815 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    816 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    849 1 1176 6564 0.0 0.0 /sbin/udevd --daemon
    1155 2 0 0 0.0 0.0 [edac-poller]
    1239 2 0 0 0.0 0.0 [khubd]
    1276 2 0 0 0.0 0.0 [hd-audio0]
    1289 2 0 0 0.0 0.0 [hd-audio1]
    1339 2 0 0 0.0 0.0 [radeon/0]
    1340 2 0 0 0.0 0.0 [radeon/1]
    1341 2 0 0 0.0 0.0 [radeon/2]
    1342 2 0 0 0.0 0.0 [radeon/3]
    1343 2 0 0 0.0 0.0 [ttm_swap]
    1353 2 0 0 0.0 0.0 [usbhid_resumer]
    1510 2 0 0 0.0 0.0 [flush-8:16]
    1514 2 0 0 0.0 0.0 [jbd2/sdb1-8]
    1515 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    1516 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    1517 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    1518 2 0 0 0.0 0.0 [ext4-dio-unwrit]
    1522 849 1100 6584 0.0 0.0 /sbin/udevd --daemon
    1525 1 864 15296 0.0 0.0 /sbin/mount.ntfs-3g /dev/sda3 /media/windows -o rw
    1768 1 548 26140 0.0 0.0 supervising syslog-ng
    1769 1768 2092 28512 0.0 0.1 /usr/sbin/syslog-ng
    1783 1 1240 13156 0.0 0.0 /usr/bin/dbus-daemon --system
    1786 1 5312 38840 0.1 0.2 /usr/sbin/hald
    1787 1786 1292 22284 0.0 0.0 hald-runner
    1816 1787 1132 24400 0.0 0.0 hald-addon-input: Listening on /dev/input/event0 /dev/input/event1 /dev/input/event2
    1830 1787 1132 24396 0.0 0.0 hald-addon-storage: polling /dev/sr0 (every 2 sec)
    1862 1787 1124 19892 0.0 0.0 hald-addon-acpi: listening on acpi kernel interface /proc/acpi/event
    1869 1 656 5988 0.0 0.0 /usr/sbin/crond -S -l info
    1879 849 996 6580 0.0 0.0 /sbin/udevd --daemon
    1881 1 576 6132 0.0 0.0 /usr/s

    I don't see this behaviour neither on the machine with intel video nor on the machine with nvidia.
    No average load changes or memory usage increase. I don't have Arch kernel installed though only custom from sources.
    You can find reports with increased load issues, but I never had this problem. It seems as these were related to specific hardware (AMD?) and kernel bug(?).

  • I am running Ubuntu 10.10 with Firefox 3.6. Tried to install a video downloader for youtube. I get error -228 for all plugins tried. I have followed the trouble shooter and software installation is allowed, and cache is 50MB and enabled. Any suggestions?

    Firefox version 3.6.10

    I followed to the link to the article:
    http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    And went to "error -228" and followed this instruction>
    "On Linux, this error can be caused by IPv6. To disable IPv6, go to about:config and find the preference network.dns.disableIPv6, then right-click on it and toggle it to true. This change will require a restart of Firefox. "
    This fixed the problem and I can download plugins and extensions without difficulty.
    Thanks.
    Richard9

  • Form with view having instead-of-trigger gives FRM-40501 and ORA-02014

    I created a data-entry from with a 'view' as datas-source block. This view gives crosstab query results with a data from a single base-table but it is complex and uses decode and aggregate funciton 'max' just to create group by in a crosstab query. I have created a instead of trigger on this view to update or insert a record in base table. A test to update base table works fine at SQl prompt. A test to insert at SQL shows '1 row created' but in fact when I query the database, it does not show newly inserted row. Also, when I compile and run this form, I get FRM-40501 and ORA-02014. Help!!!
    I know that DML operations on a view with DECODE, aggregate functions or group by can not be performed but I thought the "instead of" trigger on the view to update the base table should eleminate this restriction and hence pusued further but now stuck!
    BTW: I can post details of base table, view, and instead of trigger, if you want to see them to further decipher the problem. Just let me know. Thanks!
    VERSIONS: Forms in developer suite v10.1.2.0.2 on Windows XP 64 bit desktop - ; Backend database: 9.2.0.8 on Windows 2003 EE server
    Edited by: user8647268 on Aug 19, 2009 1:19 PM
    Edited by: user8647268 on Aug 19, 2009 1:25 PM

    I just forgot to ask you one question: In my experience with forms, I have captured before_value and after_value and implemented logic based on results many times. This form I am working on is kinda first multi-record form where I have a tabular page with date and about 7 other columns forming a grid of cells, which users wanted. Each line is a record from a view. I tried relying on forms to do DML on underlying table and since the underlying table is a paritioned table, I ran into FRM-40509 and ORA-00936, where returning ROWID becomes problematic. I found a note 167550.1 which says to set Key mode to 'Updateable' or 'Non-Updateable' but not 'Unique' or 'Automatic' as a solution #1. Solution#1 failed i.e. the errors persisted. The note also says in that case, implement Solution #2, which is to write explicit trigger to do each of the DML on view. Here I run into kinda problem: In a tabular form with say 31 records each row having 7 cells which is like capturing 217 before values..that is too many. Addressing them with ':old.xxx' or ':new.xxx' which works in instead of trigger, does not work in trigger inside forms. Without checking these before and after values, it inserts rows with nulls for empty cells where we wnated it to skip and do nothing. So iam looking for a way to capture before value using some kinda standard form mechanism..Do you have any suggestions! (Sorry for long explanation but that is the only way to do it..)

  • [SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

    I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
    I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
    system info
    This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
    $ uname -a
    Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
    $ lsmod | grep dm_
    dm_crypt 28672 2
    dm_mod 98304 5 dm_crypt
    $ lsmod |grep xts
    xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
    gf128mul 16384 2 lrw,xts
    smartctl status
    Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
    # smartctl -A /dev/sdb
    smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
    Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
    === START OF READ SMART DATA SECTION ===
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
    2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
    3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
    5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
    8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
    9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
    10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
    191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
    192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
    194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
    195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
    196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
    225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
    Disk info, delete existing partition, new MBR, create new partition
    # fdisk /dev/sdb
    Welcome to fdisk (util-linux 2.26.1).
    Changes will remain in memory only, until you decide to write them.
    Be careful before using the write command.
    Command (m for help): p
    Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x76d37b6d
    Device Boot Start End Sectors Size Id Type
    /dev/sdb1 63 976768064 976768002 465.8G 83 Linux
    Command (m for help): d
    Selected partition 1
    Partition 1 has been deleted.
    Command (m for help): o
    Created a new DOS disklabel with disk identifier 0x2cd60f13.
    Command (m for help): n
    Partition type
    p primary (0 primary, 0 extended, 4 free)
    e extended (container for logical partitions)
    Select (default p): p
    Partition number (1-4, default 1):
    First sector (2048-976773167, default 2048):
    Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
    Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
    Command (m for help): w
    The partition table has been altered.
    Calling ioctl() to re-read partition table.
    Syncing disks.
    trying to format with cryptsetup
    I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
    # truecrypt -v --debug luksFormat /dev/sdb1
    bash: truecrypt: command not found
    [root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
    # cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
    # Running command luksFormat.
    # Locking memory.
    # Installing SIGINT/SIGTERM handler.
    # Unblocking interruption on signal.
    WARNING!
    ========
    This will overwrite data on /dev/sdb1 irrevocably.
    Are you sure? (Type uppercase yes): YES
    # Allocating crypt device /dev/sdb1 context.
    # Trying to open and read device /dev/sdb1.
    # Initialising device-mapper backend library.
    # Timeout set to 0 miliseconds.
    # Iteration time set to 1000 miliseconds.
    # Interactive passphrase entry requested.
    Enter passphrase:
    Verify passphrase:
    # Formatting device /dev/sdb1 as type LUKS1.
    # Crypto backend (gcrypt 1.6.3) initialized.
    # Detected kernel Linux 4.0.3-1-ARCH x86_64.
    # Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
    # Checking if cipher aes-xts-plain64 is usable.
    # Using userspace crypto wrapper to access keyslot area.
    # Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
    # KDF pbkdf2, hash sha1: 996745 iterations per second.
    # Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
    # Updating LUKS header of size 1024 on device /dev/sdb1
    # Key length 32, device size 976771120 sectors, header size 2050 sectors.
    # Reading LUKS header of size 1024 from device /dev/sdb1
    # Key length 32, device size 976771120 sectors, header size 2050 sectors.
    # Adding new keyslot -1 using volume key.
    # Calculating data for key slot 0
    # KDF pbkdf2, hash sha1: 1008246 iterations per second.
    # Key slot 0 use 492307 password iterations.
    # Using hash sha1 for AF in key slot 0, 4000 stripes
    # Updating key slot 0 [0x1000] area.
    # Using userspace crypto wrapper to access keyslot area.
    IO error while encrypting keyslot.
    # Releasing crypt device /dev/sdb1 context.
    # Releasing device-mapper backend.
    # Unlocking memory.
    Command failed with code 5: IO error while encrypting keyslot.
    Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
    Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
    - Impossible to crypt the drive using cryptsetup (fixed by rebooting)
    - cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
    There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
    Last edited by jwhendy (2015-05-29 16:01:40)

    @qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
    This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
    One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
    @frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
    May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
    May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
    ### there's lots like this; like 10 in a row with various sector values listed
    May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
    May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
    ### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
    May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
    May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
    I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
    Thanks for chiming in!

Maybe you are looking for