List of materials with respect to Class type/

Dear all,
In which Tcode or table can i find the list of materials with respect to any class type ?
Table name for Batch Class ?
or
How to find KLART ?
Edited by: Shailesh2510 on Feb 22, 2010 10:55 AM

hiii
To get the class type and class , go to table TCLA or TCLAT.
And one more thing , here standard system , there is transaction code to get class wise materials list.
If u want u can cevelop custom reports with help of ABAPer.
If u give the functional details to technical consuiltant , they easily build the report how ever and what ever u want in custom transaction code.
Any clarification revert,.

Similar Messages

  • Restricting issue of goods to cost center with respect to material type

    Dear Users,
    I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
    Thanks,
    Manoj

    Hi Ajay,
    Thanks for valuable input.
    I also thought in the same line , but user has the following concern on this:
    Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
    OKB9: They have different Cost center for different valuation area for the same GL Account.
    Hence through OKB9 also, we cannot post directly to COPA.
    That's the reason the above option were not adopted.
    My other concern to this is:
    In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
    After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
    My question, where can I see that figure whether in any table or in Cost Center report??
    If that is also available we can try to match those values and post to COPA.
    Let me know your thought on this.
    Thanks and regards
    Kami

  • List of materials with total PR, PO qty, and stock

    Dear All,
    Is there any std report to check the list of materials along with total PR qty, PO qty and Current stock.
    This is to check, what is the total requirement of the materials and whether Purchase team has raised the PO or not ?
    Please advise.
    Regards
    Vinoth.

    Hi,
    MD04 gives us the details of individual part no.
    But, we would like to see similar details in the form of list of materials, with cumulative demand, cumulative OPEN PR Qty, Open PO Qty and Stock.
    Please help.
    Regards,
    Vinoth.

  • Any option to get the list of Invoice with respect to Sales Area

    Dear All,
    Is there any option to check the list of Invoices with respect to the Sales area.
    Because, in VF05, we are getting the list either for a Payer or a Material.
    I want to see the list of Invoices for a Sales area. I mean, it should be similar to VA05, where we can get the list of Sales Orders even without providing the Customer and Material information.
    Reagrds,
    Mullairaja

    HI
    Use the T code VF05N and select the option Bill documents in Fi
    Here you can get the list of invoices
    Try with MC+2
    regards
    Prashanth
    Edited by: Prashanth@SD on Nov 11, 2010 9:44 AM

  • How to find list of materials with customer wise

    hi,
    how to find list of materials with customer   wise. is there any t.code.

    HI
    if you want for one customer  material combination T-code: VD52
    For multiple customer material combination T code:VD59
    Regards,
    Krishna

  • Can i create demand with respect to valuation type for a material in MRP

    hI,
       is ther any way to create demand for a material ith respect to vaulation type.
    tha means i want to give a demand for a material during a particular period
    saying that i want to produce the same material with this vaulation type 200 quantity and another valuation type 300 quantity. will the MRPplan separately.
    is ther any provesion for it
    thanks
    regards
    madan

    Dear Mr.Madan,
    This is not possible.
    MRP has nothing to do with Valuation type.
    Valuation class has the following functions
    Allows the stock values of materials of the same material type to be posted to different G/L accounts.
    Allows the stock values of materials of different material types to be posted to the same G/L account.
    Determines together with other factors the G/L accounts updated for a valuation-relevant transaction (such as a goods movement).
    MRP considers the demand given,MRP type,lot size,procurement type and the stocks available.
    But what do u want to capture exactly?
    Regards
    Mangal

  • Create list of materials with its purchase order texts from material master

    Dear all
    Simple question I do wanna ask.
    Just need to get out a list with my materials with its purchase order texts from the material master.
    As I do know that PO text is not stored on a table, it might be difficult to get it out from the system.
    Does anyone of you know how to retrieve it simply?
    Regards
    François

    Check this link Material Master Purchase Order Text.

  • Delivery creation with respect to Storage Type

    Hi Gurus,
    Can we have a control on the deliveries creation with respect to the storage Types.
    The situation is to have the outbound deliveries created only from a perticular storage type neglecting other storage types. Is there any customization?
    Thanks
    Shashidhar

    Hi ,
      For this you have to define storage type serch strategy,
    Path,
    LE> WM>Master data >Material>storage type indicator \
    LE> WM>Master data >Material>storage section indicator
    Then,
    LE> WM>Strategires>activate storage type serch (whmaintion indicator  -- st type)
    LE> WM>Strategires-->activate storage section serch  (wh -- maintion indicator   -- st section)
    Maintain the material master with warehouse number & storage type.
    ( In the case of  fixed bin maintain the storage bin in wm-2 view)
    Maintain the storage type indicator & storage section indicator.
    If you have allready maintained the storage type search strategy then  remove the symbol  *** from yor storage type search.
    Dev

  • List of materials with no associated routing...report

    Hi all,
    I need to develop a program to display a list of materials that do not have an associated routing. SAP tcode C223 lists materials with associated production versions. Do you think there is another standard SAP transaction that might get me close to my goal?
    regards,
    Mat

    Not sure about a standard transaction, but I have written a program to do this same exact thing in the past.
    Really all you need to do is check against table MAPL.
    Regards,
    Rich Heilman

  • List of Materials with out POs

    Hi,
    I want to know the list of materials for which no PO was created so far.
    Is there any report or T.code to get the material list.
    Regards.
    Chinna
    Edited by: Chinna Veerappa on Apr 28, 2009 11:03 AM

    Hi,
    do you want to know the open purchase requisitions for which No PO is created , then you can check the same in ME5A and keep Processing Status as "B" or some thing else you want ?
    Regards,
    Vikas

  • List of materials with valid Group Counters (No. of valid routing variant)

    Hi,
    do you know, how to get a list of the materials together with the information, what Group Counter is currently valid? That means if a material have 3 variants of routings, to show for example that the variant number 3 is currently valid.
    Thank you in advance.
    Ivana

    Hi Sankaran,
    this is a great tip. I tried it but it seems that our engineering has some "strange" rules for creating of the group counters. There were several group counters for one material that had the same Valid From date:-( I will have to discuss with them, why they do so.
    However thank you very much for your help. I´m satisfied what I got from the C223 transaction.
    Have a nice day.
    Ivana

  • SALES ORDER ISSUE WITH RESPECT TO BOM TYPE

    Dear expert team,
    Please some one help me over this,
    I want to create sales order,
    EXAMPLE
    we are into production of Porta cabins business, as we send electrical items to our customer site,
    now problem arises when i try making changes  in my electrical item in the sales order
    The BOM for Electrical item
    ELECTRIC ITEM                  (FINISHED GOODS OF ELECTRICAL ITEM)
    ELECTRIC SUB ITEM 0001 (RAW MATERIAL OF ELECTRICAL ITEM)  QITY=> 10     IN STOCK => 5
    ELECTRIC SUB ITEM 0002 (RAW MATERIAL OF ELECTRICAL ITEM)  QITY=> 10     IN STOCK => 3
    ELECTRIC SUB ITEM 0003 (RAW MATERIAL OF ELECTRICAL ITEM)  QITY=> 10     IN STOCK => 0
    If i have to dispatch only two items
    i.e 1] ELECTRIC SUB ITEM 0001 (RAW MATERIAL OF ELECTRICAL ITEM)  Delivery QTY => 5
         2] ELECTRIC SUB ITEM 0002 (RAW MATERIAL OF ELECTRICAL ITEM)  Delivery QTY => 3
    remaining item to be delivered later,
    So please know me, what are the respective changes to be made in my sales order or BOM  ?

    HI
    You can cearte sales order or sales Delivery against Sales BOM with out change in SALES BOM . only update component Quantity At the time of delivery
    In your Case
    The BOM for Electrical item
    ELECTRIC ITEM (FINISHED GOODS OF ELECTRICAL ITEM)
    ELECTRIC SUB ITEM 0001 (RAW MATERIAL OF ELECTRICAL ITEM) QITY=> 10 IN STOCK => 5
    ELECTRIC SUB ITEM 0002 (RAW MATERIAL OF ELECTRICAL ITEM) QITY=> 10 IN STOCK => 3
    ELECTRIC SUB ITEM 0003 (RAW MATERIAL OF ELECTRICAL ITEM) QITY=> 10 IN STOCK => 0
    At the time of delivery update only component Quantity  
    i.e 1] ELECTRIC SUB ITEM 0001 (RAW MATERIAL OF ELECTRICAL ITEM) Delivery QTY => 5
    2] ELECTRIC SUB ITEM 0002 (RAW MATERIAL OF ELECTRICAL ITEM) Delivery QTY => 3
    And Update this third item with Zero (0) quantity .
    ELECTRIC SUB ITEM 0003 (RAW MATERIAL OF ELECTRICAL ITEM) QITY=> 10 IN STOCK => 0
    remaining item to be delivered later,
    Hope it will helpful for u.
    Thanks
    Khan Imran

  • MM revision with respect to material type

    Hello Team,
    Can we restrict material revisions only for few material types.? If so how?
    regards,
    sai
    Edited by: Csaba Szommer on Jan 17, 2012 8:47 AM

    Hello
    1)put t-code cc01
    2)don't give any external no.
    3)give change type
    4)give description
    5)make change no. status active
    6)select object type and tick mark over material only
    7)select object (e.g, give material no.)
    then save it.Then note the change number.
    8)Goto CC11 t.code,give material no.
    enter now,
    then give change number
    give revision level 01
    save now
    9)goto,MM02 t code
    Give material no. along with change no. and enter now
    Then you can see Basic data one revision level
    Regards
    Gyana

  • Report for the list of materials with component & assembly scrap

    Dear Experts ,
    I have been told to generate a report for the materials which are subjected to component and assembly scrap . Please guide me for the same . Many thanks in advance.
    Yours
    Aman Khan

    Dear Aman,
    It you are maintaining both assembly scrap  & component scrap both in MM you can read MARC table by creating simple query.
    Read Field MARC-AUSSS & MARC-KAUSF.
    If you are maintaining component scrap in BOM item read STPO-AUSCH.
    [Query Creation|How do create query in SAP?]

  • Creating a new class type in the classification system

    We are wanting to classify objects in a ZTABLE.  We have a home grown system for defining our customer requirements that is used as the way for the sales people to communicate to the engineering dept. what the customer wants.  A new need has come up that seems to be a good fit to be able to classify our customer requirements.  I have been trying to create a new class type that is linked to our ZTABLE.  However, even though it looks like we should be able to do this I have not been able to do it.  I ran across some documentation that seems to imply that adding a new class type used to be possible, but no longer is.
    Can anyone verify that creating a new class type is still possible to do?  We are on ECC 5.0.

    Can someone point me in the right direction as to how to create my own Class Type.  Is there some documentation as to how to dow this? Other than what is fould in SPRO I have tried and tried but no joy for me. 
    This is what I have done so far:
    in SPRO:
    1) Created an Object Key for my table ZLO_CUSTREQ.  This table has a primary key of CRQNR (custormer requirements number which is I created)  The documentation says that I need to add this key field to structure RMCLY (I did that).  BUT, it also says the RMCLY is embeded in structure RMCLX and it is not.  Do I need to modify RMCLX to add RMCLY as an append structure?
    2) Went to Maintain Object types and Class types and selected my table. Double clicked on Class Types in the Dialog Structure tree, which displayed an empty list of class types. 
    I then Clicked New Entries button and filled in the fields: Class type(Z10), Description(Customer Requirements), Table(ZLO_CUSTREQ).  in the Screens group I selected Keywords and Characteristics.  In the Functions group I selected: Standard class type and Multiple classifications. I then Clicked the back arrow.  This returned me to the Class Types list which now displayed my new class type. 
    When I click the save button it kicks me out the the SPRO menu screen and I get the warning message "Class type Z10 does not have the classification status incomplete system" . 
    Then, it won't let me re-enter the Maintain Object types and Class Types screen due to an error "View cluster is already open, go back with F3"
    When I hit F3 I am returned to the main SPRO screen.  After navigating back to the Maintain Object types and Class types I continue to get the View cluster already open error.  The only way I can get back to Maintain Object types and Class types  is to completely exit SPRO and start over.  When I do, class type Z10 is gone.
    I have repeated this procedure several times with always the same results.
    Can anyone please help me?

Maybe you are looking for