List of persons selected with PNP

Hi all,
Is it possible to get the list of selected persons using the pnp LDB.
Thus before get pernr statement  i want know  the list of all selected persons.
Thanks in advance,

no, you have to collect each and every PERNR to build the list
but you may apply a processing on the list only after a user action

Similar Messages

  • Setting up a new developer account has wrong name listed in personal information with no option to edit

    In the process of setting up a new developer account, getting to step #2 & reviewing the personal information, the first & last name listed for my Apple ID is incorrect, however it is correct on the Apple ID settings page, as well as all of my iTunes billing information. How can this be updated? I don't want to create a developer account and be listed with the wrong name!

    Please read before you post.
    Contact [email protected] to investigate signup issues.

  • Data selection and Person selection

    Hi all,
    What is the difference between 'Data selection' and 'Person selection' in PNP screen.(PNP logical database)
    I searched so many . But couldn't find appropriate one. Still confusing.
    Can any one explain me with example?
    must use both at a time or any one selection is enough?
    Which situation use 'Data selection' and which situation use  'Person selection' ?
    Thanks in advance.

    thanks for all reply.
    I have one pernr 700098
    Hiring date : 01.01.2008 - 16.08.2008
    firing date : 17.08.2008 - 31.12.9999
    I developed a customized report using PNP LDB.
    If , I entered 01.01.2008 - 31.12.2008 in 'Data selection'
                  3 in employee status( active)
    or
    I entered 01.01.2008 - 31.12.2008 in 'Person selection'
                  3 in employee status( active)
    If , I entered 01.01.2008 - 31.12.2008 in 'Data selection'
                  0 in employee status( active)
    or
    I entered 01.01.2008 - 31.12.2008 in 'Person selection'
                  0 in employee status( active).
    In above all cases picking the same record. what is the use of PNP screen?
    after 'GET PERNR' pernr structure get the value of latest record from infotype P0000.ie firing record. Because it doesn't bother the status.
    For below case picking the proper one.
    If , I entered 01.01.2008 - 16.08.2008 in 'Data selection'
                  3 in employee status( active)
    or
    I entered 01.01.2008 - 16.08.2008 in 'Person selection'
                  3 in employee status( active)
    If , I entered 17.08.2008 - 31.12.2008in 'Data selection'
                  0 in employee status( active)
    or
    I entered 17.08.2008 - 31.12.2008 in 'Person selection'
                  0 in employee status( active).
    Plz any one clear me.
    Thanks.

  • Populate html:select with List of Strings

    Hello everyone,
    I need to populate an html:select with a List of Strings. The list I receive is not composed of objects, only Strings. I want each of these Strings to be an option of the select.
    I've tried this way:
                    <html:select property="tamanho" >
                       <html:options collection="gradeTamanho"/>
                    </html:select>Didn't work. Does anyone know how?
    thanks

    Does anyone know how to do this? There has to be someway that I can populate an Option List with a list of contentIDs in a folder. Maybe using CMIS?

  • Hi All, difference btwen data selection and person selection period in ldb

    Hi All, difference btwen data selection and person selection period in ldb -pnp
    If possible provide with an example .Its Urgent pls.

    Hi,
    Difference:--
    Data Selection Period
    The data selection period enables you to specify the period in which employee data records are read. Only records which overlap with the specified period by at least one day are selected. To define an interval, enter the start date in the left column and the end date in the right column
    Person Selection Period
    When you enter a person selection period, the system selects only those employees who are members of the enterprise on at least one day in the specified period. These are persons with a valid Organizational Assignment (0001) record. Entries in the standard selection options fields limit the personnel numbers that are selected. You can specify an interval by entering the start and end dates in the left and right columns respectively.
    Selection criteria in PNP are just used to determine the pernrs which meet them. For these pernrs then all wanted data is selected. This data then is not checked against this criterias.
    An Example:
    Pernr 4711 has benn assigned to costcenter 10 from 01.01.2004 until 31.12.2004. On 01.01.2005 costcenter changes to 20.
    If you now select all employees with costcenter 10 and list their costcenters, you will get both costcenters 10 and 20.
    Most reports which use PNP have to sets of date-ranges:
    - Person selection period that controls selection of pernr.
    - Other period that controls selection of data.
    If you set person selection period in above example to 01.01.2004 and other period to 01.01.2005 and select costcenter 10 you will in fact get employee 4711 with costcenter 20 shown.
    Same effect with org-unit or any other selection criteria.
    Regards
    Vasu

  • What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
    https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • Report For list of material Master with PO text

    Hi all,
    I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
    If any one can help, please reply to this theard.
    Regards,
    Kapil Kulkarni

    To get the material number combined with the PO text you will need the help of an ABAP programmer.  The programmer can create a report for you using the function module READ_TEXT in the function group STXD.  The tables to use are:
    STXH - STXD SAPscript text file header
    STXL - STXD SAPscript text file lines
    The selection screen should have at least the following:
    OBJECT - STXH-TDOBJECT
    NAME - STXH-TDNAME
    LANGUAGE - STXH-TDSPRAS
    TEXTID - STXH-TDID
    You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header.  For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST.  You can use this program to get long text in lots of places like information records, purchase order texts, etc.
    Hope this helps.

  • HOW TO SEND PERSONALIZED EMAILS (WITH SAME MESSAGE) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR NAME BUT NOT WHO ELSE IS GETTING IT

    HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
    ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?

    In the csv file, the column headers must match the the special references in curly brackets.
    So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
    To change the column header:
    In the example shown below, I wanted to use the first two columns
    'First Name', 'Last Name' note the exact spelling.
    I also wanted the email address which was in a column called 'Primary Email'.
    To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
    But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
    At this point check that all the contacts do have a valid email address.
    then save the file.
    If you do not want to edit the .csv file, then you need to edit the template email.
    eg: {{First Name}} {{Last Name}} <{{Email}}>
    change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
    If still having an issue, please post two images.
    One image needs to show the row of column headers used in .csv file.
    The other image needs to show the Template email, so I can see how you have used the curly brackets.

  • Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

    Hello Community
        "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
    domain controller using Active Directory and the UI.
        In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
    forest trust with Forest-Wide authentication so that a different forest user(s) or
    group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
        But also forestB needs to create a "One-way, Incoming" forest trust so that
    I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
    in my "forestA" or I can
     add user(s)  as  "domain user(s)" from “forestB” into my "forestA".
        The problem is that when I right click  the global group in my forestA  and then
    properties, when I click "Members" and then the "Add" button when I type
    "forestB\username" I get an error message from Active Directory stating:
        "the following object is not from a domain listed in the Select location
    dialog box, and is therefore not valid: forestB\username".
        Am I doing something wrong when creating the one-way trust in my
    “forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
        Or could I possibly need to select "Change Domain" or "Change Domain Controller"
    before adding the users or Groups to my forestA from forestB?
        That is why I am asking
     how do you add an Active Directory user from one forest into another forest?
        Thank you
        Shabeaut

    Hello Denis Cooper
        That is the end result.
        What I was trying  to do was that I was trying to
     bring in the user(s) and group(s) from “forestB”  into
    my “forestA”  Global group.
        Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
     into the domain local groups  on my member servers in my forestA.
        So since the error message is:
    "the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
    Does your response
     mean only Global group(s) from forestB not domain user(s) from forestB have
     to been added to domain local groups in forestA?
    Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
    how without getting the above error message?
    Thank you
        Shabeaut

  • 1 Conditional report based on 3 select lists/ 3 different select statements

    I have made 1 report based on the three select lists. The report is displayed in the center of the page. The user needs to fill them in order, the select lists are:
    Selectlist:
    1. P1_LOVPG - Null is allowed, but is only appearing at top with a label of Productgroup
    2. P1_LOVSG - Null is allowed, but is only appearing at top with a label of Subgroup
    3. P1_LOVMA - Null is allowed, but is only appearing at top with a label of Manufacturer
    LOVPG contains a distinct collect of the ProductGroups
    QUERY LOV = select distinct pg from X
    LOVSG contains a distinct collect of the SubGroups inside the selected PG.list
    QUERY LOV = select distinct sg from X where pg = :P1_LOVPG
    LOVMA contains a distinct collect of the Manufacturers inside the selected SG.lst
    QUERY LOV = select distinct ma from X where sg = :P_LOVSG
    Based on the the selected items the user would see the following:
    Table X
    PG SG MA ART
    A-----X----M---1
    A-----X----N---2
    A-----Y----M---3
    A-----X----M---4
    B-----X----M---5
    B-----Y----N---6
    B-----Z----O---7
    Seletion 1 PG = A -> selects PG A in select list result, User sees:
    Report A
    PG SG MA ART
    A-----X----M---1
    A-----X----N---2
    A-----Y----M---3
    A-----X----M---4
    Query would be: select * from X where PG = :P1_LOVPG
    Selection 2, user still sees the above, can only select from the SG select list NULL, X, Y. User needs to choose between X or Y value. He picks X, he sees:
    Report B
    PG SG MA ART
    A-----X----M---1
    A-----X----N---2
    A-----X----M---4
    Query would be: select * from X where PG = :P1_LOVPG and SG = :P_LOVSG
    Selection 3, user still sees selection 2 on his screen, can only select from the MA list bewteen NULL, M or N, user needs to choose between M or N. He picks M, he sees:
    Report C
    PG SG MA ART
    A-----X----M---1
    A-----X----M---4
    Query would be: select * from X where PG = :P1_LOVPG and SG = :P_LOVSG
    As you can see the query changes as the user goes deeper into the structure. It is a simple if then else system where the quey changes. How do I set this up in htmldb?
    (I've read something about Oracle's SQL and it's decode function, but can they be used with changing select statements?)

    are you sure your data meets the JOIN conditions?
    You can make a quick check.. only example...
    select single * from KONP into ls_konp
    where knumh = P_knumh.
    if sy-subrc eq 0.
    select * from from A905 into table lt_a905 where
         kappl in so_kappl
         and kschl in so_kschl
         and VKORG in so_vkorg
         and vtweg in so_vtweg
         and kondm in so_kondm
         and wkreg in so_wkreg
         and knumh = ls_konp-knumh.
    if sy-subrc eq 0.
    select * from A919 into table lt_a919
    for all entries in lt_a905
    where kappl = lt_a905-kappl
    and kschl = lt_905-kschl
    and knumh = lt_905-knumh.
    endif.
    endif.

  • Add new field infotype "z" in logical database selection screen pnp

    Can add new field infotype "z" in logical database selection screen pnp
    I could explain how to realize
    Thanks

    In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
    u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
    u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
    "Allocation operative area to optional delimiter
      IF NOT p_aroper IS INITIAL.
        DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
              wa_texpr TYPE rsds_expr,
              lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
              wa_rsds_expr_tab LIKE rsdsexpr.
        REFRESH lt_rsds_expr_tab.
        wa_rsds_expr_tab-arity = '0'.
        wa_rsds_expr_tab-fieldname = 'OBJID'.
        wa_rsds_expr_tab-option = 'EQ'.
        wa_rsds_expr_tab-low = p_aroper.
        wa_rsds_expr_tab-high = '00000000'.
        MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
        APPEND lt_rsds_expr_tab.
        REFRESH lt_texpr.
        wa_texpr-tablename = 'PA9004'.
        wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
        MOVE-CORRESPONDING wa_texpr TO lt_texpr.
        APPEND lt_texpr.
      pnpdynse[] = lt_texpr[].
      ENDIF.
    English is the forum language.
    Edited by: Rob Burbank on May 18, 2011 11:41 AM

  • Selection screen: PNP database or other selection criteria

    I received a specification of a new to be developed program where they defined a selection screen with a with 2 radio buttons:
    1.     Use the logical database PHP for data selection (rb1);
    2.     Use other criteria for data selection (rb2).
    My question is, is this possible?
    Or should I add the other criteria between the GET PERNR and the following code with?
    Sample:
    GET PERNR
      IF rb2 = ‘X’.
        [Check other criteria]
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
      ENDIF.
    null

    When either pnp OR other selection :
    Create program 1 with 2 radiobuttons ==> pnp-selection (rb1)or other selection (rb2). When rb1 is selected go to pgm1 with pnp ; when rb2 is selected go to pgm2 with other selection criteria. Copy pgm1 to pgm2 and add extra selections en delete pnp-statements.
    When pnp WITH extra selections : 1 pgm can be used as you described.

  • List of Open PO with all items open in it

    Dear friends,
    I want to know the open purchase order of which all items are open in it.
    Even if a single item is partially delivered nor GR done that PO shouldnt be listed.
    I tried with me2n with selection parameter as we101 but it shows PO with partial delivery or partial GR done for other items.
    So kindly let me know the std report and also relevant table and fields.
    Regards,
    vimal

    Kindly check Wiki_code gallery there is report source code for open purchase order which gives list of all the PO's which are open.
    anya

  • Standard Report to see list of purchase orders with  Payment terms

    Hi  ,
    I want to see list of purchase orders with corresponding  Payment terms.
    Is there any standard report available ?
    I checked ME2L,  ME2M , ME80FN and ME81N ...
    But there is no option to add payment term field ZTERM in layout option.
    kindly let me know if there is any way..
    Thanks & Regards,
    Hari priya

    Hi krishna ,
    Thanks for your prompt reply..
    I know we can use dynamic selection for payment term as input seelction...
    but in i want to display payment terms  for list of purchase order in output.
    Is there any way to add zterm- payment term field in output layout of reports.
    Thanks &Regards,
    Hari priya

  • Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

    Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?  I don't need the calendar grid.  I just want a list of events on a particular calendar, and their dates.  Is that possible? 

    Not easily. Two possibilities:
    1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
    2) You could write an Applescript to locate the events and write them into a text file for printing.
    The first one will probably give you what you want.

Maybe you are looking for

  • Error while trying to deploy BIDS Cube

    Hi I have created a Cube, and when I'm trying to deploy it I'm getting errors. First error it's on Calculations Tab on a Cube under Metadata: "Error loading metadata connection is not open" There's also another error: "Unable to query 'AdventureWorks

  • WUC-17 Information was missing from the supplied file download request java

    Dear Forms Guru, Can anybody help why i'm receiving this error using webutil. WUC-17 Information was missing from the supplied file download request java.. the result in my jinitiator console are the ff: Loading http://oracleserver.hfgmgroup.hfgm:888

  • Multiple ResultSets with Oracle Thin Driver.

    Hi, I am using Oracle Thin Driver to Connect to the Oracle Database (8.1.7). I wanted to take advantage of the multiple Resultsets Scenario for fetching Data from the DB. Please have a look at the code fragment below. String sql = "select * from TAB1

  • Gift card usage

    I am looking for how to use a gift card in the itunes store. I have an acocunt already, and have no problem purchasing songs with a credit card, but do not see anywhere to enter in the gift card. I looked at help and it says it should be in the accou

  • Mapped drive duplicating in windows 8.1

    I upgraded to Windows 8.1 a little while ago and have run Windows Update recently.  For the most part, things seem to be working fine.  One issue that I have noticed is that one of my mapped drives keeps duplicating.  This seems to happen after every