List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
- How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Similar Messages

  • Laundry List of Problems with New Photos App...

    This isn't really a question, per se, but a list of complaints that others might have input on workarounds.
    1. I made a habit of downloading my photos to the computer after each activity that merited it.  As such, the images were naturally sorted into Events that neatly matched.  As far as I can tell, my images are all in one giant jumble of crap now.  Did I miss a step in the transition where it asked me if I wanted to keep my Events as Albums in the new app or is this just something I'm going to have to do manually?  (I guess I did have a question...)
    2. I try to avoid deleting my photos from my SD cards until I have them backed up in at least two locations.  As such, I end up relying on the app's ability to recognize the previously imported from the new.  This afternoon, I put the SD card in and it did just that, however the import buttons were disabled and even selecting the new images didn't re-enable them.  I had something else to do, so I properly ejected the SD card and came back later.  Now when I put the SD card in, it ONLY sees the old photos and doesn't even recognize the new ones as old ones.  They are completely invisible to the app.  And it won't let me import from an SD card with the Import function, simply "graying out" the folders on the card so they can not be selected.  I had to drag-copy the files into an empty folder on my desktop and then import from that location.  This is precisely n-1 steps too many.
    It really seems like this application could have used several more weeks of bug testing before being released.  I'm not prepared to say that it is definitively worse than iPhoto (which wasn't exactly phenomenal), but it really seems like a weak excuse to cram the iCloud down your throat.  That might be the corporate goal, since they keep putting tiny HDs in the MacBooks, despite the rapidly improving SSD technology and declining prices.

    In Photos your Events were converted to Albums. Easiest access is if you enable the sidebar (View Menu)
    I've seen a couple pf reports of oddities with importing from cards. Nothing to help you there I'm afraid.
    http://www.apple.com/feedback/photos.html is the place for feature requests and feedback

  • Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

    Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

    Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
    - Greg

  • Iphone 3GS - windows 7 - syncing problems with windows live mail

    I brought a new iphone 3gs last week and tried to sync it with my new dell PC running windows 7 (with windows live mail).
    It wouldnt sync, so I read the forums and reset the sync history through itunes.
    This worked, and synced my iphone to the computer. It appears to have backed up all my contacts on the iphone to somewhere on the PC (cant find where) but it hasnt copied the contacts from windows live mail to the iphone
    Have I confused anyone??

    have you tried using imap instead?
    if you can access your email from the web page then sounds more like a problem with windows live mail and not your BT account
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • Problem with RESTful web service

    I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
    Accept: */*;
    rather than
    Accept: application/xml
    when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
        // Constructor
        public function _Super_UsersService()
            // initialize service control
            _serviceControl = new mx.rpc.http.HTTPMultiService();
             var operations:Array = new Array();
             var operation:mx.rpc.http.Operation;
             var argsArray:Array;
             operation = new mx.rpc.http.Operation(null, "getUsers");
             operation.url = "http://localhost:8888/users";
             operation.contentType = "";
             operation.method = "GET";
             operation.resultFormat = "xml";
             //operation.serializationFilter = serializer0;
             operation.properties = new Object();
             operation.properties["xPath"] = "/";
             operation.resultType = valueObjects.Users;
             operations.push(operation);
             _serviceControl.operationList = operations; 
             model_internal::initialize();
    How does one configure the accept header?

    Hi,
    I have posted a simple application with the RESTful reference:
    http://apex.oracle.com/pls/apex/f?p=13758
    I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
    It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
    This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
    I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
    This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
    class="statusMessage">Bad Request</span>                                         
    </h3>                                         
    </div>                                         
    </div>                                         
    <div id="xWhiteContentContainer" class="xContentWide">                                         
    <div class="xWhiteContent">                                         
    <div class="errorPage">                                         
    <p>                                         
    <ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>                                    
    </ul>Thanks,
    Pat
    Edited by: patfmnd on May 8, 2013 3:33 AM

  • Problems with Windows Live Mail send/recieve after upgrading Firefox

    I recently upgraded Firefox and since then I get this:
    An unknown error has occurred.
    Server: 'smtp.frontier.com'
    Windows Live Mail Error ID: 0x80070057
    Protocol: SMTP
    Port: 25
    Secure(SSL): No

    have you tried using imap instead?
    if you can access your email from the web page then sounds more like a problem with windows live mail and not your BT account
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Problems with AOL e-mail and Droid Charge

    Problems with AOL e-mail and Droid Charge
    After setting up my AOL email account on my Charge, it has been syncing new messages ok, but I've been having other problems:
    - Syncing AOL mail: I have the Charge set to sync 50 emails (set up the same way as my Comcast Account) but the AOL account pulls up the last 50 old emails and delivers them to the phone. (Comcast does not do this). If I delete these old messages, it just pulls up the same amount of even older mail. Very frustrating. Because of the 2nd problem below, some of these messages were actually deleted on my AOL account before I realized what was happening. It seems I have to just keep 50 old mails on my Charge to prevent this from happening. Any ideas?
    - Second problem (kinda related) Deleting Old Mail: When I delete AOL emails I have read on the Charge, they are also deleted from my 'old mail' folder on AOL and sent to deleted mail. This is not how it worked on my BB Storm2. After deleting them with the Storm, the AOL mail would show them as read and put them in 'old mail' unless I told the Storm to delete them from the server. I cannot find any "choice" option on the Charge. I hate this because the "deleted mail" folder on AOL dumps its contents much more quickly than the "old mail" folder. How do I stop this from happening?
    FYI, both Comcast and g-mail are working as they should.....
    Thanks,

    Dear Richs10,
    As to the second problem, I have seen this before in other threads. The only solution I can come up with is to delete the AOL account and set it up on the phone from scratch. The reason for this is that the ONLY time you are able to see the option for leaving email on the server (or removing them) after reading on the phone is during the account setup process. After the account is set up, there seems to be no way to access this setting again. Kind of dumb, IMHO, but that seems to be the case.
    If you need step-by-step walkthrough of the account setup, PM me.

  • Problems sending mail: some problem with the outgoing mail server SMTP?

    I can't send e mails: some problem with the outgoing mail server SMTP?

    I had this same problem with both my imac and mac book pro using hotmail via mac mail with bt as my internet provider. Suddenly 4 months ago out of nowhere i could receive emails but could not send them. I scoured all the threads followed all the fixes none of them worked. However I just phoned apple support and fixed it in a matter of minutes. I am SO happy. This is what the technician advised me:
    Go to your apple icon and scroll down to system preferences. Then dependant on what machine you have it is different for my imac and mac book pro click on either air port/wifi then the advanced tab in the bottom right hand corner. Then click on the DNS tab. Hit the + sign on the left hand side and type in 8.8.8.8 then hit the + sign again on the left hand side it will create a new line underneathe and type 8.8.4.4 then hit okay on the bottom right and then hit apply, again on the bottom right. Then send a test email to check but it should be fixed.
    Had to share this. Its been driving me mad for months.

  • Problem with send e-mail

    Hello,
    I have a problem with send e-mail.
    When I create a new message, the e-mail is send for customer and me, but the description of message dont send with e-mail.
    I have created a Smartform that send this e-mail and your context there is information for send this information.
    When I do a modification in this message, when i put a new description, a description preview is send, but a new description dont send.
    Can anyboby help me.
    Thanks a lot.

    Hi,
    I already have created a development, but this found the description preview and not actual in run time.
    Development:
    read table gt_notif_type_text into gs_notif_type_text
    with  key type_text = gs_notif_text-type_text.
    if sy-subrc <> 0.
    clear gs_notif_type_text.
    endif.
    read table gt_notif_type_textt into gs_notif_type_textt
    with  key type_text = gs_notif_text-type_text.
    if sy-subrc <> 0.
    clear gs_notif_type_textt.
    endif.
    In the Smartform on acording abouve:
    &gs_notif_type_textt-stxt()& &gs_notif_text-last_usr()& &gv_notif_textdate& &gv_notif_texttime&
    Thanks.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Problems with Java web start

    Hi All,
    I am facing a problem with Java Web Start. Which is the most appropriate version of JDK recommended for SAP XI? I tried
    JDK 1.4.2_04
    JDK 1.4.2_09
    JDK1.4.2_11
    JDK1.5.0_01
    When I click on Integration repository or Directory for the first time, it loads the jar files and while loading, I get an error msg "Unable to launch Integration Builder". After a lot of retries I get sucess. But still we are facing this issue in some machines. Can you pls let me know if there is any pre configuration or some thing I am missing...
    Regards,
    Jai Shankar

    Did you check the proxy settings in JAVA Web start. Please follow the below instructions.
    This could be set to None or to specific for values HTTP Proxy and HTTP Port .
    Contact your network administrator for the correct settings. 
    To change the Proxy Settings:
    Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
    Choose File -> Preferences -> General
    Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
    ChooseOK
    Close Java™ Webstart

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

Maybe you are looking for

  • For anyone who has tried to read the ICCCM

    the greatest rant ever: http://lists.slug.org.au/archives/slug- - 00054.html English football hooligans -- if I want to get a short message to the other side of the field, do I use my ICCCM-based X Window PDA? no, I tell it to a random hooligan, poke

  • Online account help

    why does it say on my online account say that i changed my phone #, i cant even click on were it states that i changed my #  what does that mean? or were can i find any information so i can view what its talking about?

  • N95 8GB - "Unable to save. Profiles in the same re...

    Hi all! I have a N95 8GB RM-320 V 30.0.018 When I try to config another account SIP in the same realm, but with another user name, the system show me this message error above: "Unable to save. Profiles in the same realm must have same user name" I ca

  • Wsa can't compile client in webservices_demos

    I'm trying the 10g(1003) web service demo: webservices_demos\basic\stateless. When I try to compile the web service client using either ant or command line, I got the following exception: Exception during compile, trying again with shorter command li

  • Using DNG profile editor

    If I have exported a profile from the DNG Profile Editor, will that profile automatically show up in the camera calibration panel of Lightroom 2.0 ? If it is not a very good profile, how do I then delete it? (computer is running Vista). Thanks.