List printing anomaly

I have a bunch of phone numbers I want to print from my Address Book. So I selected the contacts and hit Print. Under Style, I chose Lists. It automatically prints a "2-column" format. I didn't have enough names to even finish out one column, and it printed fine. All the contacts and their phone numbers were on the left side of the page. And there was plenty of space on the right side for a 2nd column.
But when I added enough names to start a 2nd column, the names and numbers in the 1st column got scrunched together and overlap. In other words, this 2-column format works fine as long as you have only 1 column. As soon as you need a 2nd column, it gets screwed up.
Anyone else noticing this? Any advice?
(I'm printing with a Canon MP830).

Hi Sohail,
              Why dont you develop smart form/ sapscript / adobe form. Otherwish you have to adjust the report output as per the page format. Or you have to set logic for the next page entries as per requirement.....
              Or ask them to download the same list as per there required format and set a print as per there requirement....
Cheers,
Sagun Desai...

Similar Messages

  • ABAP list printing on device I2SWIN

    Hello,
    we have defined output device (printer) with device type I2SWIN for printing on users frontend computers via SAPlpd. Settings of I2SWIN device type is default:
    SAPlpd/SAPWIN driver 3.0
    Do not use printer driver for ABAP list print
    Character set 1406 Printer I2SWIN  ISO 8859-2 (MS Windows Latin-2)
    We can print ABAP lists on this device. We define formats and set margins and orientation in this formats. But these settings are ignored during printing. If we change in I2SWIN setting Printer driver to "Printer driver for SWIN printing using SAPLP/Windows", then margins are accepted and printed, but there are wrong characters in print output (not in requested code page).
    Could anybody help us how to set print to accept margins in ABAP lists and also have print output with good code page.
             Thank you
                   Vaclav Jonas
    Edited by: Vaclav Jonas on Apr 24, 2008 3:02 PM

    O.K., we use margin settings according SAP Note 21738 and all works fine.

  • Alv List  print printer information in 1st page

    Hi,
    At the time of alv list printing the following information is printed on 1st page. How to avoid this information when printing.
    INITSTRING
    Start r_3-Prolog
    Drucker :  Wipro EX-330+DX
    System :   RAP (reprdfo)
    User :        11BO
    End  r_3-Prolog
    Thanks in advance.

    Hi GoldMoon,
    (edit) Print another basic ABAP list (print anything else) on the same printer to see if that first page is printed. If yes, it's probably either SAP, OS, or Print Server cover page. They are explained in "cover page" SDN wiki, there are explanations how the cover page can be output (and so you can deduce how to remove it).
    Best regards,
    Sandra
    Edited by: Sandra Rossi, 5 minutes later

  • Pick list printing

    Hi Experts,
                     How can i stop pick list printing, i have assigned a print program which is used by all plants but I want to stop pick list printing for one of the plants.
    Thanks
    Satya

    Hi,
    Go to T code OMLV and tick the printer where you don't want printing to happen.Hope this will solve your issue.

  • Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

    have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

    Hello, Edward and thank you for your note.
    I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
    After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
    I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
    I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
    Regards,
    Mike

  • Exclude Completed To Dos from a List print

    How do you exclude completed To Dos from a List print out? I don't want to delete them, because I sometimes need to look up a completed To Do, but I don't want them to be printed when I only need the current ones in a list. Any ideas?
    Spot.
    P.S.: If this topic has been answered before and you know where it can be found, please post the link in a reply. I looked through the forum, but I didn't find anything concerning this.

    Well, it looks like you can't control that with the print options.
    You could move completed to-do's to a different calendar and turn off that calendar when printing. I imagine that would get to be a pain very quickly. I guess you could create an applescript that moves completed to-do's to a different calendar and run it every time before you print the list. (Still seems like a lot of work)
    Powerbook G4 1.5 GHz   Mac OS X (10.4.8)   1.5 GB Ram

  • List printed To-dos wont hold sort order...!

    Whenever I short my daily to dos in iCal and get the rank priority I want, and then try to print them out in the list view for the day, they print out in random, jumbled up order. Anyone know if I'm doing something wrong, or is that just how iCal works.(not very well)

    Okay. I've collected myself and found a Mac based print screen solution. We have software called Grab.
    Here are the directions:
    Taking a picture of part of your screen
    If you don't need a picture of your entire screen, you can capture just part of the screen using Grab.
    Open Grab (located in /Applications/Utilities).
    Choose Capture > Selection.
    Move the pointer to a corner of the area you want to capture.
    Drag the pointer across the area and release the mouse button.
    Grab captures the part you selected within a few seconds. A new window appears with the image of the selected area.
    Then you just print up the grabbed document.
    Wait --- lemme check the print out --- Did it work?
    Oui, oui! A thousand times yes!
    Tally ho:
    Nanz

  • Invoice List print out multiple output devices

    Gurus
    I have a requirement where in I need the Invoice list to generate output to 2 different devices.....
    Here is my dillema, Invoice list program looks at the output device that is set up in the user defaults in the user area, SU3 transaction, Since only one output device can be used in that field I can generate Invoice list output to only one printer unless done manually that is not possible as the number of invoice list is huge.
    I am using ECC 5.0 , Does anybody have a solution for this???
    Thanks
    In advance

    The printer name can be defaulted from the output condition record, which I believe trumps the printer in the user's default.
    You could have two output condition types Z001 and Z002, both automatically proposed and each pointing to a different printer.

  • Vendor/Customer balance confirmation lists print

    Hi,
    when we want to print vendor/customer balance confirmations, transactions f.18/f.17 always print:
    - form set
    - reconciliation list
    - results table
    - if there is some error - error list
    We want to restrict the printing only to FORM SET and we DO NOT want to print reconciliation list and results table.
    Is there some way to configure F.18/F.17 to print only FORM SET?
    Thank you.
    Ľubou0161

    Hi Lubos,
    I have the same problem...how did you solved this?
    Thanks and regards,
    Victor

  • Attachment list printing problem

    I am using the Entourage mail program. How does one get the box that lists the file names of attachments to a message to print out as part of the message? I just want to have a printed copy of the list--not the contents of the attachments called out in the list.
    For instance, I send out a message with a series of attachments listed in the box below the subject line, but when I print out the message I have sent, the attachments are available when the paper clip is clicked, but are not listed when a copy of the sent message is printed.
    Thank you.

    Hi Experts,
    Could you please let me know,which format has to be selected, my report is exceeding 255 characters.
    Z_65_1032         Format for 65-1032 columns         
    Z_FREE_SIZE      Free size                          
    Formats suitable under certain conditions:          
    X_PAPER          ABAP/4 list: Default list formattin
    X_SPOOLERR       ABAP list: Spooler problem report  
    X_65_255            ABAP/4 list: At least 65 rows with 
    X_58_170            ABAP/4 list: At least 58 rows by 17
    X_65_132           ABAP list: At least 65 rows by 132 
    X_90_120           ABAP list: At least 90 rows by 120 
    X_44_120          ABAP/4 list: At least 44 rows by 12
    X_65_80            ABAP/4 list: At least 65 rows by 80
    Regards,
    IFF

  • Address Book sorting list print

    I noticed today a strange behaviour of the print function in Mac Os X Mountain Lion Address Book.
    I have to print the entire contacts list.
    I ckecked the "Sort by Last Name" in preferences, and on the video everithing is as expected.
    So I tried to print ad with my big surprise all the contacts are totally mixed!
    I can't find any sort rule! Just one contact after another!
    At the moment I thought that I made a mistake in some settings.
    I checked the entire print window and I havent found any option to set the sorting list preference.
    Maybe is very well hidden........
    Can anybody help?

    https://discussions.apple.com/message/19330865
    Hope this helps.

  • How can I list print queues per server via power shell script

    Hello,
    we are managing many print servers on our domain environment,  now for auditing purpose I need to report print queues per server,  and it seems bit difficult task doing it via GUI in print management view, could someone help me with script which
    gets me the no. of print queues on each print server.
    Also I need to list all the print drivers installed on each print servers. 
    I tried to list the drivers " Get-WmiObject win32_printerDriver -filter " but this will get me complete information about the driver, I need to list only the driver name (-filter) either _RELPATH or _PATH
    dibu

    You can also use WMI like this:
    (get-WmiObject win32_printer -computer ws702).count
    I don't understand what you mean by list only.  Just select what you need.
    See: http://technet.microsoft.com/en-us/scriptcenter/dd742419
    That will give you some basic background on how to use PowerShell to get the properties of objects.
    ¯\_(ツ)_/¯

  • List Print issue------------Urgent

    Hello All ,
                    I have a little problem, I have created a list program. I have to check the if the user already taken the print out of the list then at the secound time(while taking the program) I have to give him the message that the list is alredy printed Once .
    Can Some one suggest me some good Idea.
    Regards
    Swati Namdeo

    Hello All ,
           Can some one please Reply and see the issue. I have tried with At user Commnad.
    but the event not oocurs at  AT USER COMMNAD.
    Can Some one Please Reply on the above matter.
    Regards
    Swati Namdeo

  • Pick list print preview

    Hi all,
    How can I view the print preview of pick list output type EK00?
    When I get to the Picking output from VT02N, it only shows me the status of the output generated.
    But I can't see the print preview.
    Also can I generate Ek00 output for a delivery manually?
    Thanks,
    Raghu.

    I found that I can see the print preview of Picklist using transaction VL06P

  • Picking List Printing Problem

    Hi,
    I have copied SD_PICK_SINGLE Layout and using standard RVADDN01 Program.
    While Printing These Errors is coming :
    Element HEADER_DATA window MAIN is not defined for form YHPK-PICK_SINGLE       
    Element HEADER_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE       
    Element ITEM_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE         
    Element ITEM_PURCHASE_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
    Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE   
    Element ITEM_LINE_CONFIGURATION_BATCH_HEADER window MAIN is not defined for form
    Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE    ....
    I dont know why these errors are coming as i have copied the standard layout form.
    I have made a new output type 'YHPK' in 'V2' Shipping...
    In this output type i have selected two processing routines:
    1     Print output RVADDN01     ENTRY     YHPK-PICK_SINGLE
    2     Fax          RVADDN01     ENTRY     YHPK-PICK_SINGLE
    While Debugging all the Elements are traveresed but the value is not populated.
    As a result blank picking list only with heading is printed.
    Please help me resolve this issue urgently....
    Regards,
    Abhishek
    [email protected]

    Yes i even activated it for both DE and En Versions...
    But the same problem
    Message was edited by: Abhishek Bachhawat

Maybe you are looking for

  • Is there a way of importing projects in imovie 11?

    hello today me and my cousins made a star wars film and trailer i shared the projects and they disappeared from imovie and were sat on my desktop! IS THERE A WAY TO PUT IT BACK IN IMOVIE! please help  my cousins be annoyed that we can't put stuff on

  • Resolution of MacBook iSight Camera?

    Was wondering if anyone has found out what the resolution is of the new MacBook iSight. I know that the Air has one that is inferior to the other ones, but can't find any info. on the one in the new MacBook.

  • Errors "Load tModels into the registry" option & publishing proxy services

    Hi, I'm making a study with BEA Aqualogic Service Bus and BEA Aqualogic Service Registry. Reading official documentation (Console Help), I added with the BEA ALSB Console two registries. But during the configuration it doesn't allow me to set the *"L

  • Bad argument openProject when running SaveAsProjectTemplate.jsx

    Hi I have created a RoboHelp 8 project template and rolled it out to the team for use in an upcoming project. Six authors have been able to load the project then, using the Script Explorer, have run the SaveAsProjectTemplate.jsx script to make it a p

  • Why am I asked for developers key in ctbw ?

    Hello all, I have used ctbw in my dev box and created characteristics. I re-did the same procedure in QA box of R/3 as well ( did not transport but re created the datasources) and now I am trying to do the same thing in the production box and this ti