List styles not showing up in Conversion Settings dialog

In linked Frame documents, RoboHelp collapses multi-level unordered lists (bullets and subbullets) to a single flat list. So this in FrameMaker:
Fruit
Vegetables
Carrots
Peas
Becomes this in RoboHelp:
Fruit
Vegetables
Carrots
Peas
This happens when I map both bullet and subbullet styles to "Normal" and choose "Convert Autonumber to HTML List". To resolve this, I can either map my subbullet styles to Source (which has its own issues), or I can map the subbullets to a different paragraph style. So I tried creating a list style. But now I can't select the new style from the Conversion Settings dialog. It doesn't show up in the RoboHelp Style drop-down, and I can't manually enter the style name. It's strange, because my other custom styles are listed.
I've tried switching to a differents CSS file and even restarting RoboHelp, but it's still not reading my changes. Any suggestions?
Thanks,
Melanie

Hi M_
It looks like you're mapping your 1st and 2nd level lists to the same css style in RH.
Try (for example) mapping
1st level bullets to BodyLevel1
2nd level lists to BodyLevel2
Converting your autonumber to HTML List
You should get nested UL's in your HTML, although IIRC there's an odd bugaboo if you have a single 2nd level list item at the end of your nested lists. I think that one's a bug in the conversion process, and is best handled by avoiding that situation in FM.
-Matt Sullivan
@mattrsullivan

Similar Messages

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I'm having trouble sharing my i pod list with my other computer. I authorized both computer's, but list is not showing up in my laptop. (2nd generation Ipod nano)

I'm having trouble sharing my Ipod list with my other computer. ( lap top) I authorized both computer's for home sharing but the list is not showing up on my laptop. My I pod is a second generation nano. So how do I get it to show up on my laptop?. Also I only have two computer's but it's authorized with 4, two were old computer's, how do I take them off the list without deauthorizing all 4 computer's,? Or do I have to deauthorize all 4 and then authorize the two I have now? my desk top pc is operating on vista, and my laptop is operating on 7. Does that make a difference? HELP! thank you.

iTunes Store: About authorization and deauthorization
iTunes 10 for Windows: Authorize a computer to play iTunes Store purchases
iTunes: Frequently asked questions about viewing and syncing videos
iTunes 10 for Windows: authorize
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows

My contact list does not show all my contacts.

My contact list does not show all my contacts. If I keypad a number not shown in the contacts it does know who that contact is. What can I do to show all contacts? I have 352 contacts in the phone.

Do you have different Groups for contacts? For example, perhaps you have some contacts stored on the device, some associated with a Yahoo account, and others associated with an Exchange account. If you have multiple groups like this, tap the "Groups" button at the top-left corner in Contacts and see if you're looking at only a subset of your contacts. There is an option to view "All Contacts", which summarizes them all for you.

SharePoint lists are not showing in SharePoint designer "Lists and Libraries" section

Hi ,
I using sharepoint 2010 and sharepoint designer 2010.
I created a custom list on the sharepoint , and i trying to open the list through designer, but in sharepoint designer under the "Lists and Libraries" section that created custom list is not showing.
But when i click on "AllFiles-->Lists -->MyCustomlist " (its present in the root folder's "Lists" folder)
can anyone help on this.
regards,
RK

Hi,
According to your description, there is a list appears in “All Files” section but not in "Lists and Libraries" section in SharePoint Designer.
What if you refresh(F5) the SharePoint Designer in the "Lists and Libraries" section? Will the issue list appears?
If the list still doesn’t show up, please clear the cache of the SharePoint Designer and reconnect your site for a test.
About how to clear the cache of SharePoint Designer:
http://www.c-sharpcorner.com/UploadFile/sagarp/how-to-clear-your-sharepoint-designer-20102013-cache/
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Payment category withholding tax list is not showing in ap invoice

Hi Experts,
Payment category withholding tax list is not showing in A/P invoice. If it is invoice category code's are showing.
I'm using 8.8 PL 12. In BP the tax code check box is enable only.
Regards,
Sudhir B.

Hi,
Please refer to following link:
[How to Guide|https://websmp106.sap-ag.de/smb/sbo/howtoguides]
Check Note No. : 1367045 as well.
The withholding tax code in "Payment Type" is blocked in A/P down payment requests, A/P down payment invoices, and A/P invoices.
It is available only for AR side.
Kind Regards,
Jitin
SAP Business One Forum Team

Onlive TV listing does not show HD listing for series when I try to create a recording

It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
Here is what I am doing:
I go to this link https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
Then to ...........DVR Manger
select ...........Record A Show
I type search e.g. Nathan for You
I click on ........Search
and I select ......Click here to Show Details
Then I get to chose from 2 (the same) SD channels.
Nathan for You
190 Comedy Central
Tue, Jul 29 10:30 PM
Record Show Record Series
Nathan for You
190 Comedy Central
Tue, Aug 05 10:30 PM
Record Show Record Series
But there is the same on channel 690 HD!
This happens not only to this particular channel!
I remember it used to show also the HD channels.
The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
correct choices for both SD & HD.
Can this be fixed?
Thanks!

On the right click on HD under video quality to filter it.

Category drop down list does not show all taskes

Hi, I created a project using product Upgrade Assitant for Release 12. I did not add any customized tasks. I just need to run the default tasks for upgrading 11i to r12. I did the setup following Maintenance Wizard User Guide Release 2 without any problem. But when I try to run the steps, the category drop down list only show one task: Configuration. Where are all other categories? Thanks

Hi, Thank you for the reply. I did successfully finished all the 4 tasks for the configuration category without any errors. I want to continue with other tasks. But the drop down list does not show anything else except Configuration. From the user guide:
Important Notes:
• To view the full list of categories applicable to your installation, you must complete all of the steps in the Configuration category. When you complete these steps, you must refresh the lower left pane of your Web browser. The entire list of categories appears.
What does this mean "you must refresh the lower left pane of your Web browser". I don't see anything to be refreshed. But even after I restarted mw (it must be refreshed now), the category list still now shown.

On my iPad reminders has a list called scheduled but this list does not show in my iPhone or Mac Pro book what Di

On my iPad reminders has a list called scheduled but this list does not show in my iPhone or Mac book pro. What do I need to do to have scheduled reminders on my iPhone and MacBook Pro?

iBooks appear in the separate iBooks app in OS X 10.9 Mavericks.
Audible handles only audiobooks. They can't help with any issue with an iBook.
Regards.

Word styles not appearing in Print Document Appearance dialog

My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
Thanks again,
John

Peter,
I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
John
From: Peter Grainge [email protected]
Sent: Thursday, October 13, 2011 8:47 AM
To: John Dawson
Subject: Word styles not appearing in Print Document Appearance dialog
Re: Word styles not appearing in Print Document Appearance dialog
created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

List style not visible in printed documentation

Robohelp 8.0.2
Is this a bug??? I opted to use a numbered list style rather than a numbered paragraph style to label procedural steps. The advantage of a list style is that skip numbering would not work properly using the paragraph style. i.e.:
'Steps' Paragraph style with numbering associated:
First step.
          Result of first step.
Second step.            * Bullets and Numbering does not allow me to consistently "Restart numbering at 2" (and HTML this produces is faulty).
'NumberedStep' List style with numbering:
   1. First step.
           Result of first step.
   2. Second step.               * Bullets and Numbering allow me to consistently "Restart numbering at 2."
Now I see the consequences of my decision: My 'NumberedStep' style is not included in the styles dropdown. Inconvenient, but not itself the end of the world.
The real problem is this: Printed Documents are not consistent with the style defined in 'NumberedStep'.
The font is larger than it should be, and indents are all over the place:
This is the selection I made on Generate Printed Document:
On first review, all the styles in my source translated easily to Word, but the style for NumberedStep text was not. That text is now 'Normal'.
I've hunted high and low to solve this issue, so a direct reply is appreciated.

Firstly, your better off using liststyles than paragraph list styles, I screwed around a long time before I had to set everything to liststyles rather than paragraph ones. So dont worry about that.
The first issue, of not seeing the style - it is there, if you open the Styles tab on screen (click in a topic to get the cursor, then Format > Styles), not just the dropdown like youve shown youll see a list of all your styles, almost, it will show paragraph styles, click the drop-down and select All available styles, this will display your list styles as well!
Im not sure about the style settings, I have the same text setting applied in my list style as I use for my 'normal' text. Though I think you can select the text in a list and apply a paragraph style to it....i just tried and it worked, but to be on the safe side you might want to set the text formatting in the list style css too..
mine looks like this
li.NumberList {
    font-family: Helvetica, sans-serif;
    font-size: 10pt;
    color: #524C45;
    list-style: decimal;
    margin-bottom: 6pt;
    margin-top: 6pt;
As for printed formats not indenting lists, this is an issue. So far I have found no way around it because you cannot map a list styles in RH to a list style in Word. This has also created errors for line spacing and indents - and I found the indents are severly messed up when using list styles in snippets. Everytime I create printed documentation I have to manually fix it, a pain but it doesnt take too long....you could use macros etc to speed it all up for you.
Submit a Wish Form.
Hope it helps.
Nick

IPhone 4 iOS 4.1 - Calendar App List View Not Showing Events Immediately

After upgrading to iOS 4.1, whenever I open the calendar in List view mode the events do not show up immediately. I have to navigate to the "Day" style or "Month" style before I can see any events. All the events are viewable normally in both the "Day" & "Month" style calendar but the "List" view.
I regularly sync my iPhone with iCal events and with Google calendar. I did delete and re-added the Google account but the problem persists.
Has anyone faced this problem? I will be doing a full restore again today. My wife's iPhone 3GS is working fine with the 4.1 build of 3GS.
Message was edited by: Raja Roy

Hello all,
I have the same issue with my iPhone 3G under iOs 4.1 (8B117) with one local calendar and three Google calendars. The first time the Calendar application is loaded, if it opens in "List" view, no events are displayed. Switching to another view is enough to get the items back. In "Day" and "Month" views, the events eventually appear after some time (~5 to 10 seconds).
My boyfriend has the same problem on his iPhone 4 under iOS 4.1 (less annoying because of multi-tasking).
Hopefully this will be fixed in iOS 4.2... :-S
Regards,
HAL1

List view not showing all podcasts

Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5

Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

New character style not showing up in TOC style

I created a new character style called Subchapter....
Then I went to layout>toc styles.. and hit [new]. Under "Style" my new character style "Subchapter" is not there. Also, under the "Styles in Table of Contents....include paragraph styles.." my new character style "Subchapter" is not in the other styles list.
What am I missing?
Thanks.
Also, forgot to mention, I am in book mode at this point. Maybe I need to add that new character style to each .IDD chapter of the book?

NEvermind, it was because I was making a character style, not a paragraph style. Now it shows up.
Thanks anyways.

List styles not showing up in Conversion Settings dialog

Similar Messages

Maybe you are looking for