Listener not starting on server reboot

for securing listener I have done the following steps:
Created a separate account and group at OS level and brought listener.ora,lsnrctl and related files/directories under this account and group.
I have secured listener by setting password (change_password,save_config followed by reload) on Oracle 8.1.7 running on HP Unix 11.11. while giving save_config the listener.ora is automatically brought under its original user and group.But I manually change it back to the account and group I created.
On server reboot listener does not start automatically.
Please help

Here is the error message, please let me know the solution:
LSNRCTL for HPUX: Version 8.1.7.4.0 - Production on 09-SEP-2007 15:17:46
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Starting /....../oracle/v8/8.1.7/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 8.1.7.4.0 - Production
System parameter file is /...../oracle/v8/8.1.7/network/admin/listener.ora
Log messages written to /......./oracle/v8/8.1.7/network/log/listener.log
Attempted to listen on: (ADDRESS=(PROTOCOL=IPC)(KEY=.......world))
TNS-12555: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00525: Insufficient privilege for operation
HPUX Error: 1: Not owner

Similar Messages

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Listener not starting up

oracle database 8i
OS windows 2000 server
listener not starting
following is the error message from udump
network error encountered setting up listening port
listening address for dispatcher is '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'
NS Primary Error: TNS-12532: TNS:invalid argument
NS Secondary Error: TNS-12560: TNS:protocol adapter error
NT Generic Error: TNS-00502: Invalid argument
32-bit Windows Error: 22: Invalid argument

Arun,
Check your listener.ora file whether the entries are proper or not, if not using oracle net configuration assistant configure listner,servicename.

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

Node Manager not starting UCM Server automatically

Hi All,
I have configured Node Manager to start and stop UCM 11g server.
But whenever, I am restarting the host OS - Windows server 2003 64 bit, it does not start the UCM managed server, automatically.
I am running two managed servers on the same host OS, the first UCM manages server, starts automatically on every restart.
The second managed UCM server, does not start. I need to then manually start the managed server. There are no errors logged, and the manual start of the managed server happens without any issues.
As a workaround, I tried starting the managed server from Windows scheduler, but it does not start the server as well. I wrote a script like -
Myscript.cmd
call E:\..\user_projects\domains\prod_domain\bin\setDomainEnv.cmd
java weblogic.WLST c:\start....\ServerStart.py
scheduled the script (myscript.cmd) to run from the Windows Scheduler.
Any pointers would be very helpful. Are there any known issues, if there are two managed servers, and one starts automatically, which affects the starting of the second managed server?
I see the following error in the log file -
<14/10/2011 6:35:22 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<14/10/2011 6:35:33 PM EST> <Info> <Management> <BEA-141223> <The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {PRDAdminServer,PRD_UCM_server1,PRD_IBR_server1}.>
<14/10/2011 6:35:33 PM EST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {PRDAdminServer,PRD_UCM_server1,PRD_IBR_server1}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
Regards
Avi

Hi Avi,
Give a cross check to your ServerStart.py
As the error states The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist
In your ServerStart.py you might have specified as follows
sh start MAnagedWeblogic.sh server=PRD_UCM_Server1
While these are the list of Server you have in your weblogic
PRDAdminServer,
PRD_UCM_server1,(You have Specified in your command PRD_UCM_Server1
PRD_IBR_server1
The Command should be as follows
sh start ManagedWeblogic.sh server=PRD_UCM_server1
This should help
Regards
Fabian

Node Manager not starting UCM Server

Hi All,
I have configured Node Manager to start and stop UCM 11g server.
But whenever, I am restarting the host OS - Windows server 2003 64 bit, it does not start the UCM managed server, automatically.
I am running two managed servers on the same host OS, the first UCM manages server, starts automatically on every restart.
The second managed UCM server, does not start. I need to then manually start the managed server. There are no errors logged, and the manual start of the managed server happens without any issues.
As a workaround, I tried starting the managed server from Windows scheduler, but it does not start the server as well. I wrote a script like -
Myscript.cmd
call E:\..\user_projects\domains\prod_domain\bin\setDomainEnv.cmd
java weblogic.WLST c:\start....\ServerStart.py
scheduled the script (myscript.cmd) to run from the Windows Scheduler.
Any pointers would be very helpful. Are there any known issues, if there are two managed servers, and one starts automatically, which affects the starting of the second managed server?
Regards
Avi

Hi All,
Add to my initial post , the error which is getting logged is -
<14/10/2011 6:35:22 PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<14/10/2011 6:35:33 PM EST> <Info> <Management> <BEA-141223> <The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {PRDAdminServer,PRD_UCM_server1,PRD_IBR_server1}.>
<14/10/2011 6:35:33 PM EST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name PRD_UCM_Server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {PRDAdminServer,PRD_UCM_server1,PRD_IBR_server1}.
     at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
     at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
     at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
     at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
     at weblogic.Server.main(Server.java:71)
Regards,
Avi

FNDFS Listener not starting after patching

12.1.3
redhat 4.8
DB 11.2.0.1
We recently did patching on our R12 system. The system is online, however the concurrent managers are not working due to the APPS_NPCP listener not starting. When attempting to start FNDFS this is the error we get. This was a working system prior to applying the patches. I can provide a list of patches if needed. There were just under 30 of them I believe. The majority of them were in doc # 437878.1
[applnpcp@ahdsedstws16 apps_backup]$ adalnctl.sh start
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_NPCP.
adalnctl.sh: exiting with status 1
<============From adalnctl.txt logfile =================>
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=ebusr12)(Port=1636))
TNS-12533: TNS:illegal ADDRESS parameters
TNS-12560: TNS:protocol adapter error
TNS-00503: Illegal ADDRESS parameters
Listener failed to start. See the error message(s) above...
09/10/13-13:52:41 :: adalnctl.sh: exiting with status 1
<======================end=======================>
Nothing really should have changed in the context file or in how the tnsnames.ora is generated, looking at the file it appears correct. What else can I check as to why this won't start anymore?

Where the patches applied to the correct ORACLE_HOME?
Have you verified the contents of listener.ora and tnsnames.ora file under $TNS_ADMIN directory? Running AutoConfig should usually fix those files (assuming it completes successfully and you have proper entry in the /etc/hosts file and your FND_NODES table entries are correct).
How to get a clean Autoconfig Environment ? (Doc ID 391406.1)
Thanks,
Hussein

IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Could not start SDM Server - another Server may be running already

Hi
I have some problems with SDM after upgrade to SP16.
Right now i can't neither start it, nor change password..
it has an error but i don't understand it, because i have only one instance and the server is stopped.
I'm enclosing the error, please, if you have some ideas let me know.
Thank you.
Oct 10, 2006 12:34:29... Error: ERROR: Could not start SDM Server - another Server may be running already.
Oct 10, 2006 12:34:29... Error: Another SDM is running already for this SDM_HOME directory. Exiting. Throwable: com.sap.sdm.client_server.launch.SDMRunningException Throwable message: Another SDM instance is running on this host
Oct 10, 2006 12:34:29... Error: Could not start SDM. Processing error. Return code: 4

A lot of thanks of your answer (both of you)..
None of the prerequisits of the note exists on my system.
"1)There is a started SDM server on the system. All SDM commands have to be executed when there is no started SDM server. Or SDM port is busy by another application."
Server is on red color. I had reseted all tha instance, nobody use it, any applications.
"2)2. The executed command can be run only if SDM is in standalone mode."
Yes, i ran before the next command: Execute :
sdm jstartup "mode=standalone" "sdmhome=C:/usr/sap/<SID>/<Instance>/SDM/program"
"3. SDM port is busy by another application."
the port is only used for sdm wich is off...
Anyway, in order to get the solution, i started with the steps described on the note, but i had a problem with the StopServer.bat
3.Run
StopServer.bat (for Windows)
When i run it, i got another message (i though a similar one):
"Sending shutdown on port 50018
Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Could not shutdown server.
Details: Shutdown failed: SDM currently runs in monolithic mode. Logons cannot be accepted.
Processing error. Return code:4"
Any ideas?
Thank you.

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

Configuring Oracle to start upon server reboot

Hi all,
I have a server running RH 4 with a single instance of Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit running on it.
I would like to configure the database to start and stop upon server reboot.
I have configured oratab
I have placed the following in: /etc/rc.d/rc5.d
lrwxrwxrwx 1 root root 15 May 4 2010 S99dbora -> ../init.d/dbora
I've set my ORACLE_HOME in dbora.
Nothing happened when I rebooted though. Can anyone point me in the right direction? Are their logs I can check to see if the script was even called?
Thanks very much

geeter wrote:
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#CFAHAHGA
Linux is one of the OSes listed, but not the distribution.
Also isn't the sample dbora file supplied an init.d type script?Yes, but it does not conform to specification for init.d on RedHat kernels. The specs on a Debian distro is again different from that RedHat. Which is different from the original SVR4 (System V Release 4) standards.
I would not expect Oracle documentation to cover all these standards. It provides you with the basic init.d style script - it is up to you to implement that correctly so that it adheres to specs of your o/s for init.d startup and shutdown scripts.
So the doc is not wrong - merely not "complete" as it does not cover the finer details of differences in init.d implementation across Linux/Unix versions and distros.
I would also not use that dbora script as is - I would instead make a copy of an existing script and then customise that. This will ensure that the specs are met. For example, displaying the service name with a green OK or a red FAILED status simple needs one to include the default init.d script library. Similarly, you can use default/supplied checks for whether the network is up (required for starting the Oracle Listener) and so on.
The docs are an excellent start and reference - but it cannot cover every single detail. So it is not that the docs are wrong - but that you are expecting perhaps too much from the docs in this case.

11.1.2 opmn_EPM_epmsystem1 service will not start after server move

Moved our 11.1.2 Windows 2008 SP2 (not R2) 64 bit machines from one domain to the other (test to prod) and reconfigured the repositories to the prod SQL server (2005). Configuration is all green yet the EPM_epmsystem1 will not go to started. It sticks at Starting and after some type of time out stops.
We run as administrator thinking that would be the problem but to no avail. We tried the delivered script but to no avail either.
In the E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\OPMN\opmn directory the opmn.log shows only this:
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: E:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\states
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready. Request handling enabled.
[2011-01-19T14:48:44][opmn][ERROR:1][17][OPMN][code:ons-listener]172.16.10.31,6712: BIND (Unknown error)
Looking for avenues on how to resolve this ...
JTS

Hi John,
I still get the same error message when i start the opmn from the command prompt.
[2011-01-20T08:17:28][opmn][NOTIFICATION:1][675][OPMN]OPMN server ready. Request handling enabled.
[2011-01-20T08:17:28][opmn][ERROR:1][17][OPMN][code:ons-listener]10.177.63.163,6712: BIND (Unknown error)
Its a VM Image and i havent sent any ipaddress in the host file too.
however i am unable to start the OPMN (epmsystem1) service too from services.msc and it throw below error
Could not start the Oracle Process Manager (EPM_epmsystem1) service on a Local Computer.
Error 1053: The server did not respond to the start or controle request in a timely fashion.
Please help i am unable to start essbase from any of them

TNS-12560: TNS:protocol adapter error listener not starting up.

Hi all
we came to an issue where we have to move our server from one data centre to another after unplugging the machine and re-plugging the server
1) Operating system (OEL 5.1) started.
2) Database 11gR2 started.
3) Listener Failed to Start.
[oracle@yam01 tmp]$ lsnrctl start lsn_yscc12
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-OCT-2012 07:57:58
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
[oracle@yam01 tmp]$
When checked in sqlnet.log we found.
[oracle@yam01 log]$ cat sqlnet.log
Directory does not exist for read/write [u01/app/oracle/product/11.2.0/log] [u01/app/oracle/product/11.2.0/log/diag/clients]
[oracle@yam01 log]$
/u01/app/oracle/product/11.2.0/log
/u01/app/oracle/product/11.2.0/log/diag/clients --> here under diag folder client folder was missing.
drwxrwxr-x 3 oracle oinstall 4096 Sep 30 12:59 /u01/app/oracle/product/11.2.0/log/diag/
*[oracle@yam01 log]$ cd /u01/app/oracle/product/11.2.0/log/diag/clients*
-bash: cd: /u01/app/oracle/product/11.2.0/log/diag/clients: No such file or directory
*[oracle@yam01 log]*
[oracle@yam01 diag]$ mkdir clients
[oracle@yam01 diag]$ ls -ltr
total 12
drwxr-x--- 3 oracle oinstall 4096 Sep 30 12:59 rdbms
-rw-r----- 1 oracle oinstall 15 Oct 2 07:43 adrci_dir.mif
drwxr-xr-x 2 oracle oinstall 4096 Oct 2 08:27 clients
[oracle@yam01 diag]$
and added *"SUBSCRIBE_FOR_NODE_DOWN_EVENT_lsn_yscc12=OFF"*
and then when started all the listener it started successfully.+_
[oracle@yam01 ~]$ lsnrctl status lsn_yscc12
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-OCT-2012 08:40:19
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=100.100.50.199)(PORT=1603)))
STATUS of the LISTENER
Alias lsn_yscc12
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 02-OCT-2012 08:28:09
Uptime 0 days 0 hr. 12 min. 9 sec
Trace Level admin
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/yam01/lsn_yscc12/alert/log.xml
Listener Trace File /u01/app/oracle/diag/tnslsnr/yam01/lsn_yscc12/trace/ora_10095_3086223040.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=100.100.50.199)(PORT=1603)))
Services Summary...
Service "YSCC12.YAMAMACEMENT.COM" has 1 instance(s).
Instance "yscc12", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@yam01 ~]$
Thanks all for Reading this post
hope if you came across this issues this may work for you.
Best Regards
Kaleem.

Welcome to OTN
Thank you For you sharing :)

Urgent! http listener not started with services

Hi,
I installed oracle 9i on my win2k, and it runs fine when I started manually with the ${ORA_HOME}\j2ee\Oracle9iDS\startinst.bat.
I then try to registrate it as services with this command: rwserver -install rep_mypcname autostart=yes
It registrated successfully and I save it is started automatically, I also saw an icon (smart agent) on my right hand bottom taskbar.
But when I tested it via http://localhost:8888/reports/
It can't find the server, and obviously no http listener is up.
All my config are default, here is my rwservlet.properties:
SERVER_IN_PROCESS=YES
Also there is no log files generated in ${ORA_HOME}\j2ee\Oracle9iDS\log\ when it is started as service, but if it is started from command line by using "startinst.bat", some log files are generated.
Am I missing some steps?
Thanks.
David

David,
Script startinst.bat starts the OC4J instance, not the Reports Server. When you send request to http://<server>:<port>/reports/rwservlet, it will startup an in-process Reports Server if it has not been started.
The command you run:
rwserver -install rep_mypcname autostart=yes
only install Reports Server as a service. It has nothing to do with OC4J instance, which you will still need to startup yourself. That's why http server is not up.
The difference is that if the Reports Server is up, after you start up OC4J, the in-process server will no longer need to be started.
-Jeff

Listener not starting on server reboot

Similar Messages

Maybe you are looking for