LMS 3.2 DFM Email subject customization question

hello,
In these options there are UserDefined fields. I would like the IP address added to our DFM email alerts and was wondering if that can be done by defining one of the UserDefined lines. If so, where do you modify these?
thanks!

Hi,
By any chance did you manage to modify the User-define fields in LMS 3.2
with thanks
sathappan

Similar Messages

  • LMS 3.2 DFM email notification problem

    Hi,
    I got a problem in a newly installed LMS 3.2 with the DFM email notification.
    I can see the alerts appering on Alerts&Activities, but DFM would not send any emails.
    I can get emails from other moduls of LMS. CS sends me emails from successfully backups.
    The SNMP Server works fine. The settings are ok.
    I already reinstalled DFM.
    I have seen a thread exists on supportforum.cisco.com with the same problem.
    (https://supportforums.cisco.com/message/3033101#3033101)
    Maybe anyone have the answer to this problem.
    Thanks,
    C8-Netzwerk

    This looks like an issue I am currently tracking.  I have written a patch which should correct this.  You can get the patch by opening a TAC service request, and having your engineer contact me directly.
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com

  • ISE 1.3 Guest Account Expiration Notice email subject customization

    Hi,
    Under Guest Type Settings, you can configure Account Expiration Notification. I managed to customise the e-mail body, but I cannot change the subject. Is there a way to change the subject of the email guests are receiving before account expiration?
    Thanks,

    1

  • Email notification in human task: How to customize email subject.

    Dear all community members,
    I am using email notification service in human task to receive email notification if task is assigned to me. I have configured email notification in human task & I do receive the email in my inbox as assignee.
    The default email subject is like [Action Required: TASK_TITLE], I want to remove this [Action Required:] from email subject.
    I tried setting <%null%> in Notification Header in .task file but the email subject is still has Action Required.
    Is there any way to customize email subject so that I can get rid of [Action Required:] [FYI] in email subject.
    Thanks & Regards.

    I believe this will help - http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_cust_res_bndl.htm

  • I have an email account on qou but all the incoming emails subject and body appear as question marks, why???

    I have an email account on QOU (al-quds Open University) but all the incoming emails subject and body appear as question marks, why???

    Try to set the Boolean pref <b>gfx.font_rendering.directwrite.use_gdi_table_loading</b> to <i>false</i> on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

  • Email Subject in Subscription Notification - customize wording?

    Hi all,
    we use EP6 NW04SPS11.
    Our users have discussions in Collaboration Rooms to which they can subscribe. Then they get an Email containing a link to the discussion.
    The Problem: in the email the word "subscription" is not really optimal, so we took the SUBSCRIPTIONADMIN_de.xml from etc/notifications to change the text in the mail body.
    But i can't find the place where the subject of the email is generated, there we always have the text "Subskription "<DiscussionTitle>". There had been an great discussion thread with doku about this but the Email Subject is still an open issue
    Customized Subscription Massage
    Any ideas out there ?
    regard, yann

    Hi Yann,
    this is a little bit tricky, though.
    The subject is taken from a property file inside this JAR:
    <i>\usr\sap\{REL}\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.km.cm.repository.service\private\lib\km.appl.repository.service.app.subscription_core.jar</i>
    When you open this JAR you'll find several translated property files. (Res_??.properties)
    Inside these files you'll find the mailing subjects.
    I'm not sure if this trick works...: Unzip the JAR, edit the file, zip the JAR. Test if this works...
    Maybe you'll have to redeploy the PAR (that contains the JAR). The PAR could be found here:
    <i>\usr\sap\{REL}\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\com.sap.km.cm.repository.service.par.bak</i>
    Simply rename the par from <i>.par.bak</i> to <i>.par</i> (after changing the JARs content) then restart the portal. This will redeploy the PAR, with its content. This should do it, if the first one doesn't...
    Puh...I guess this should do it.
    Hope this works!
    Regards
    Dirk

  • Reset Password email:  subject line and body

    For an email that is sent from this page:
    Home>Manage Workspaces>Manage Developers and Users>Reset Password
    Question: Where/how can I change the subject line and message-body contents for this email

    I would like to customize the subject line and body. for example...
    Current Email:
    Subject: Your password has been changed.
    Body: Account password changed for user CXXXXX.
    I would like to modify to:
    Subject: Your 'Oracle Application Express' password has been changed.
    Body: 'Oracle Application Express' Account password changed for user CXXXXX

  • LMS 3.2 DFM Event Summary problem

    Hi all,
    I have two issues, and one question:
    Issues:
    1)
    In the DFM portlet, under DFM Evnets Summary I see a list stating that I have 2 devices that have Event Name as Duplicate. When I click on the number 2, it opens up Device Fault Manager - Alerts and Activities, but it's show with no records. This has been like this for quite some time now... Any ideas on how to fix this?
    2)
    I've got 5 devices in DFM that are in the DFM Device Status as Questioned. They don't exist in CS, RME nor any other place. I went to DFM Device Management and under Rediscover/Delete, and was going to delete the devices from DFM, but the delete button is grayed out. How can I remove the devices from DFM?
    And now for the Question:
    I sometimes get an event in DFM Alerts and Activities that looks like this:
    Name                                                          Value
    Event_Description:               InformAlarm
    Component:                         [FQDN DEVICE NAME REMOVED]: Cisco Configuration Management Trap
    Description:                         Cisco Command Monitoring -> Event Command Source: SNMP, Event Config Source: Running, Event Config Destination: Network TFTP
    Sometimes it gets cleared by it self... So I'm a bit interested to find out what does this event mean? and how to get rid of it?
    Any help is appreciated
    Gudvardur

    It sounds like your DFM databases may have gotten out of sync with the rest of LMS.  You can clear the first two problems by following the steps in https://supportforums.cisco.com/docs/DOC-8796 to reinitialize the dfmEpm, dfmInv, dfmFh, DFM.rps, and DFM1.rps databases.  Do not reinitialize the others.
    As for the delete button being grayed out, this is expected when DFM is in auto-manage mode.  To activate this button, go to DFM > Device Management > Device Import and disable auto-manage mode.
    The config management trap you're seeing will occur whenever the config changes on the device.  This event should clear on its own.

  • Customizing PO approval workflow POAPPRV for email subject/body changes

    Hi,
    The requirement is to modify the email subject/body of the emails sent to the suppliers once PO is approved.
    They would also like to remove the
    'From/To/Sent/Id' which is displayed as first section in body currently.
    I am new to workflow, so could you please guide me in achieving this?
    Is workflow customization only option?
    Do we have any other way in which the requirement can be accomplished?
    Thanks!

    >
    I would like to know how FYI gets appended before.
    in the body before the actual text, From/To/Sent/Id are all displayed. I would like to know where they are fetched from.
    I can understand it uses some template for email, but am unable to locate it.
    >
    The FYI is appended based on the type of notification. Since this message does not require any action from user, Oracle adds FYI.
    See http://apps2fusion.com/apps/workflows/327-workflow-notification-template to understand the template.
    >
    Also can you point me to good references for workflow customization.
    >
    You can look at
    Customizing seeded workflow steps
    http://www.workflowfaq.com/
    Anil Passi has good tutorials for this http://oracle.anilpassi.com/oracle-workflow-training-lesson-1-2.html
    See white paper at http://www.vivekasolutions.com/user_docs/WFCustomizationWP.pdf
    >
    Because this is the only change that am expected to do in this critical PO workflow. I dont want something else to be affected because of this.
    >
    As long as you stick to PO approval workflow, you won't affect other areas. If you modify the template (provided you find it), you may affect other areas.
    Sandeep Gandhi

  • Edit Workflow Mailer - Purchase Order Email Subject

    Hi,
    We have configured the workflow mailer to enable reminders to be sent out to approvers which relate to Purchase Order approvals that have not been responded to.
    However, as well as a reminder email being sent, there is also an email telling the approver that the previous email has been canceled. This has a the email subject prefixed with "Canceled:"
    Our problem is that users are seeing this and thinking that the Purchase Order has been cancelled. We therefore want to either edit the subject of this email, or stop it being sent.
    Any help/advice would be appreciated.
    Thanks,
    John

    JOhn
    I think this mail is sent by the workflow mailer using the item type System Mailer. This is auto generated notification when the notification itself is canceled or retired. You can customize the subject there based on the source.
    Thanks
    Nagamohan

  • Email Subject based polling in OSB

    Hi,
    I was just wondering if there is an email subject based / From based polling in OSb.
    I know that email box polling is supported.
    And i do have one more question. Do we need to send emails only in text format for OSb email based proxy service. As the other input types for Proxy serivce are not any thing related to email.
    It would help me in designing some stuff if this is possible. Any suggestions on this? Appreciate your help. Thanks in advance

    But in messaging service the following are the only options which are present
    None
    Binary
    Text
    MFL
    XML
    Java
    But the outlook email format can be only - Plain text/Rich text/HTML.... Am i missing some thing?

  • Email subject automatically modified in Readsoft WebCycle (workflows)

    Hello,
    We are currently implementing Readsoft WebCycle solution to manage workflows prior to posting supplier invoices.
    We are using the collective emails feature, which allows to send emails once a day to warn the approver of new invoices to process in the workflow.
    There is a customizing step to define the subject for collective emails ( /COCKPIT/WI9 ).
    However, even with the customizing done, when a collective email is created, the email subject is automatically set back to the standard ("WEB CYCLE: Retain 00000000000000 document").
    Has anyone ever faced the same problem ?
    How did you solve it ?
    Thanks in advance,
    Joe

    Looks like the appserver needs to grant relevant permission for the webapp. (Standalone java applications have full access to system resources and as such security is not an issue with them).
    Can u try modifying the permissions in the server.policy file for your appserver (which by default is at <creator-install-dir>/SunAppServer8//domains/creator/config/server.policy)?
    Add 'permission java.security.SecurityPermission "insertProvider.SunJSSE";' to the global grant section or in a 'grant codebase' section for the jar in question.

  • Email subject line with Alert unique Identifier,host name, instance name

    Is there any way that i can set the following information in the notification email subject line,
    Alert Unique Category,
    Host name,
    instance name.
    Please advise.
    Thanks.

    Yes I did look under the email customization section. But i am unable to get how to place alert Unique ID with in the subject line as i don't see any variable to place under it.
    Please advise.
    Thanks.

  • Ciscoworks 4.2 - dfm email issue

    Hi Cisco Team,
    Dfm email alerts are not coming though it was configured properly.
    Did a wireshark pcap and below is the info taken from wireshark.
    Command: MAIL FROM:<[email protected]>\r\n
    Command: RCPT TO:<[email protected]>\r\n
    Response: 550 5.7.1 Unable to relay for [email protected]\r\n
    Response code: Requested action not taken: mailbox unavailable (550)
    Response parameter: 5.7.1 Unable to relay for [email protected]
    Im able to telnet to smtp server on port 25.
    ciscoworks ip and smtp server ip are in the same pvt ip range.
    Can you pls help.

    Hi Rajesh,
    Type:Daily
    [ Fri Jan 24 12:00:25 IST 2014 ] INFO   [Util : sendMail]  : sendMail()  - Ends
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : sendMail()  - Starts
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : SMTP Server:hm02sql01.xyz.com
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : Date:Fri, 24 Jan 2014 12:05:03 +0530
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : From ID:[email protected]
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : To ID:
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : Subject:Job Id:1004.277, Status:Failed(25), Application:SysInvPoller, Run Type:Daily
    [ Fri Jan 24 12:05:03 IST 2014 ] INFO   [Util : sendMail]  : sendMail()  - Ends
    This seems to show that the smtp server is trying to push the mail.
    Please check if the smtp server host name is correct in the log.
    Regards,
    Syed Khalid

  • Setting Email Subject

    Hi,
    I'm using Cp5.5 (but can use Cp6 if required), and I have a click box that when a user clicks it, generates an email to a specified email address.  Is there a way I can specify what the email subject is?
    Thanks in advance!

    Hi there
    Yep, there is! In each class I facilitate I show folks how to do exactly that!
    Oh, you need to know now and not want to wait? Okay. Fair enough.
    It's pretty simple really. Where you type the email address, you just tack on a question mark followed by the word Subject= and add your desired subject. It should look like this:
    [email protected]?Subject=Any subject you like here
    But if you try that, Captivate will squawk at you and tell you it's not a valid email address or some other such nonsense. So I have a workaround for that.
    Have you ever visited a URL and noticed the browser title bar looking like this?
    http://www.SomeDomain.com/Some%20folder%20here/Some%20File.htm
    What Captivate balks at are the spaces. It doesn't like the spaces. And those %20 values you see in the URL are spaces. So to get past things and make your email link work, you just insert %20 everywhere you would typically want a space to appear.
    Hope this helps a bit... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for