LMS 4.2.2 no IPSLA source device available

Hi,
we use the latest LMS version (4.2.2). Under Monitor->Performance Settings->IPSLA->Devices i see all devices. When creating a IPSLA collector not all devices are listed in the source section but in the target section. Why is this happening?
Any hints are much appreciated. Thank you
Regards,
Chris

Thank you for your reply. Yes i´ve changed the snmp string and now it works.

Similar Messages

  • Apple TV 2 Home Sharing depends on Source Device?

    So I've been running into an issue with Home Sharing on my Apple TV 2.  This is present on both the 4.2.2 and 4.3.2 firmware. (I own 2 Apple TV 2's. One vanilla and one running FireCore aTV Flash Black)
    When attempting to play back video content from my Mac Mini (C2D, 2GB RAM, 2.0Ghz, Mid 2007) I was unable to load any HD content, and SD content was also pretty miserable. I recently discovered this when trying to play Dexter Season 5 HD from my Mac Mini to my Apple TV 2.  Both devices on wi-fi initially.
    I tried this both from wired and wireless configurations, I tried switching my Airport Extreme to 5Ghz only, (which my Mac Mini lacks "n"), and no combination of configurations seemed to resolve the issue.
    Reluctantly, I decided to try importing the TV Shows to my Macbook Pro (13", 8GB RAM, 2.4Ghz, Mid-2010). What I found was that everything now worked seamlessly.  I tried this wired, wireless, and even went so far as to hook my MBP up to the same network cable my Mac Mini was using to see if it had anything to do with the gigabit switch it was connected to.  In every scenario Home Sharing to my Apple TV 2 from my Macbook Pro worked as designed.
    So this got me thinking.  Does the ability/quality to AirPlay/Home Share to the Apple TV 2 depend on the source device?  My CPU nor my RAM on the Mac Mini were ever troubled or maxed out by attempting to stream content to my Apple TV 2. This leads me to believe the only component that could be causing the issue is the GPU. My Mac Mini only has the Intel GMA 950 GPU, my MBP has a NVIDIA GeForce 320M 256 MB.
    It makes sense to me that the Apple TV 2 isn't really decoding the video file.  The hardware really isn't there to support decoding video streams. It seems likely to me that the heavy lifting is done by the source device and the transcoded video/audio is simply presented by the ATV2.
    Does anyone actually understand the technical workings of AirPlay/Home Sharing?  Perhaps an iOS developer?
    If this is the case I'm going to have to start looking to upgrade my Mac Mini.  It's about time anyway, but this would be the final tipping point in my upgrade debate.
    P.S.: "Senior" community members who have nothing to contribute should refrain from responding to this thread only to pad their post counts. Legitimate responses only please.

    Ok, I'm glad you've said that, now what documentation do you have to back that up? Where in the Apple documentation/support site can you point to backup your claim? Do you tested any configurations that would support your assumptions?
    I'd assume that the Apple TV 2 does most of the work, but the evidence I have collected does not support that assumption.
    You've just thrown your own response under the bus.  If the video is compressed, and the ATV2 is doing the decompression, you wouldn't need to worry about bandwidth, now would you?
    This is EXACTLY why I don't come to the communities/forums anymore.  Every "know-it-all" thinks they have THE answer, but they are just as clueless as everyone else.  The difference being they are chasing a status, and not the true answer to anyone's actual problem or question.
    If you would like to continue to dig this hole feel free. I'll take the shovel when you are done.
    I've been moderated and banned by this forum before for calling this kind of behaviour out, and I'm sure this will happen yet again.
    Does anyone else have documentation, proof, or some other concrete evidence to support how Home Sharing works from a device to the Apple TV 2?

  • Cisco Prime LMS 4.2 Device Availability Poller & Portlet

    The default, non-editable "System" Device Availability poller appears to be the only one used by the Availability Pie Chart Portlet. Or is there a way to a show a chart based on a user defined poller, which excludes devices known to be currently offline?

    Hi ,
    It's true  that you will not be able to Delete the system Defined pollers ,however you can DEACTIVATE them.
    selecet system defined device availblity poller and De-activate it..
    Now created a NEW poller , add the devices which you are interested in. and you should able to see the data in the PIE chart for the user defined poller.
    Thanks-
    Afroz
    [Do rate the useful post]

  • CRVS2010 Beta - Error: No valid Report Source is available

    I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
    I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86.  All installed OK with no errors.
    I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
    The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in.  When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
    My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
    Please help - newbie and desparate! Thanks
    Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
                myReportDocument.Load("C:\Reports\stoppages.rpt")
                myReportDocument.SetDataSource(myDS)
                Session.Add("Report", myReportDocument)
                crvThisReport.ReportSource = myReportDocument
    Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

    Hi Ludek,  I tried adding
    <startup useLegacyV2RuntimeActivationPolicy="true">
      <supportedRuntime version="v4.0"/>
    </startup>
    to the config file but it didnt resolve the problems. 
    However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes.  I am posting my code to help anyone else who might be experiencing the same problems:
    Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
    myReportDocument.Load(Server.MapPath(strRptPath))
    myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
    myReportDocument.SetDataSource(myDS)
    myReportDocument.Refresh()
    myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
    myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
    crvThisReport.ReportSource = myReportDocument
    DateFrom and DateTo are the parameter names within my crystal report.
    It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring.  However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation.  It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
    Thanks for all your help and advise.
    Edited by: juliep68 on Oct 14, 2010 11:33 PM

  • HT4847 If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free?  So that you are rewarded for the additional devices?

    If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free?  So that you are rewarded for the additional devices?
    If this multi purchase if devices is not rewarded with a larger cloud storage being available, would it then be best to have several separate cloud accounts?
    Would you lose the ability to mesh data between devices???  Of could you choose to share a smaller part of the data and yet save the rest of the device data to their own cloud?  So in other words, split a devices stored data between 2 different icloud accounts?   One community iCloud account for partial data and individual account for data that does not need to be shared with the other devices, however it needs to be backed up.  The simpler solutions would be If you have several Apple devices feeding to the same iCloud account, an amount of storage made available per device (ie: 5 units of storage free per device)
    ~ So that you are rewarded for the additional Apple devices by giving 5 more units of storage or backup space per device

    Nobody here is an Apple employee, and my Christmas Season has been great, thanks very much. Neither am I jealous, I just abhor the fact that so many people these days expect more and more for free, in addition to what they already get for free. First world problems...
    Obviously Apple do consider people with multiple devices, since the whole purpose of the service is to keep data in sync across multiple devices. Clearly, after consideration, Apple decided to give 5GB of storage for free and provide customers with the option to buy more storage if they want/need more, in line with competing services.
    Everyone has their own set of unique circumstances but does that mean everyone should be rewarded with extras for free? At what point should it be considered acceptable to actually pay for additional extras you want?
    And by the way, somebody expressing a different opinion, and discussing people's expectations is not being rude. Aren't you from the country that supposedly takes 'freedom of speech' rather seriously?

  • No Devices Available

    While trying to backup my files using Backup, I got the message:
    Burn Disc In: No Devices Available
    No devices available for burning.
    What's wrong with this picture?
    Message was edited by: Brad Purvis

    OBE

  • No audio devices available in late-2013 iMac

    Updated Mavericks to 10.9.1 yesterday.
    Today there are no analog audio devices available for output.  Airplay devices work normally.
    I have reset PRAM, disconnected all peripherals etc.  Have tried connecting audio devices to the 3.5mm output jack.
    Any suggestions?
    Thanks in advance.

    This issue was resolved by re-installing 10.9 over 10.9.1.
    Think I'll wait for 10.9.2 until I update again.

  • Visual Studio 2012 - Source Not Available After Pressing Pause While Debugging

    Hi,
    In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location of the dialog in the code and the call stack would show the series of calls to arrive
    at the current position.
    Now that we've upgraded to Visual Studio 2012, this functionality is lost.  When we press 'Pause', a 'Source Not Available' tab will appear.  The call stack shows the following:
    ntdll.dll!ZwWaitForSingleObject()
    KernalBase.dll!WaitForSingleObjectEx()
    <several lines of nvoglv64.dll>
    kernel32.dll!BaseThreadInitThunk()
    ntdll.dll!RtlUserThreadStart()
    At first we thought it was a symbol issue since none of the Windows-related dlls had pdbs. None of our workstations are connected to the Internet so I used symchk to download all the required symbols.  Despite all of the symbols now being loaded, the
    debugger still doesn't show the actual call stack into our code.
    Is there a setting somewhere that needs to be set? Or are we out of luck since our machines are never online?
    Any thoughts are apprecated.
    Thanks.
    Visual Studio Premium 2012 (11.0.60610.01 Update 3)

    Hi,
    Welcome to MSDN.
    In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location
    of the dialog in the code and the call stack would show the series of calls to arrive at the current position.
    Now that we've upgraded to Visual Studio 2012, this functionality is lost.  When we press 'Pause', a 'Source Not Available' tab will appear.  The
    call stack shows the following:
    ntdll.dll!ZwWaitForSingleObject()
    KernalBase.dll!WaitForSingleObjectEx()
    <several lines of nvoglv64.dll>
    kernel32.dll!BaseThreadInitThunk()
    ntdll.dll!RtlUserThreadStart()
    According to these words above, do you mean clicking “Break All” as following image?
    The error means that our project does not contain source code for the code that we are trying to view, you could refer to
    this link for more information.
    In order to solve this issue, you could debug it in another machine which can download symbols form Symbol Servers, then copy that
    symbols to your machine to test.
    You could change the Symbols setting of the Visual Studio of the other machine as following image:
    Then copy the symbols in that directory to your machine, and change the Symbols settings to your local directory to test.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Studio Creator - Debugging - 'Source not available' - how to import

    Hello i'm in SC and want to figure out how to import the source for a class that is in error, i tried Fast Insert to no avail, thanks much!
    Exception Handler
    Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
    Exception Details: javax.faces.FacesException
    javax.faces.FacesException: Can't instantiate class: 'insertupdatedelete.Page1'.. class insertupdatedelete.Page1 : javax.faces.FacesException: java.lang.ClassCastException
    Possible Source of Error:
    Class Name: com.sun.faces.application.ApplicationAssociate
    File Name: ApplicationAssociate.java
    Method Name: createAndMaybeStoreManagedBeans
    Line Number: 308
    Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:308)
    com.sun.faces.el.VariableResolverImpl.resolveVariable(VariableResolverImpl.java:78)
    com.sun.faces.el.impl.NamedValue.evaluate(NamedValue.java:125)
    com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:243)
    com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:173)
    com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:154)
    com.sun.jsfcl.app.ViewHandlerImpl.setupPageBean(ViewHandlerImpl.java:397)
    com.sun.jsfcl.app.ViewHandlerImpl.createView(ViewHandlerImpl.java:252)
    com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:164)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:324)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)

    Hi,
    Are you working with "Performing Inserts, Updates, and Deletes" tutorial from
    http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/inserts_updates_deletes.html
    MJ

  • URGENT: No boot device available - but NO keyboard shortcuts work...

    Ok, here is what has happened so far:
    1) failed boot camp install of WinXp SP2
    2) restarted and got the BSD
    3) no keyboards shortcuts work anymore at this point (wired aluminum keyboard)
    4) go to store and buy a cheap windows usb keyboard
    5) now I'm able to boot into windows install disk, but still NO apple shortcuts work
    6) deleted windows partition from windows install utilities
    7) rebooted - still the same problems
    8) using windows install disk, delete all partitions
    9) reboot - get no boot device available error message
    10) tried unplugging the iMac and waiting - didn't work
    11) tried holding down the power button while starting - didn't work
    12) still (opt + cmd + p + r), (c), (alt), (cmd + alt + o + f) do NOT work with the apple keyboard or the windows keyboard.
    Please help, I've run out of things to try.

    did you try booting to the mac os x install disk? (hold c while power on the computer, keep holding c till you see an apple logo, or a ? mark)

  • E5 DAC/Amp Win8 error "There is no supported audio device available"

    I've just received my Sb E5, and installed the software package (while the E5 was connected and charging) without "apparent" problems. However, if I start the software it will report a problem with reading the device, and if I use the menu and select "audio device selection" it will immediately report"
    "There is no supported audio device available"
    If I disconnect, the software's volume indicator will max, and then if I reconnect USB the volume will return to ~15%.
    Please advise ...
    TIA

    Have you installed all of the drivers:
    http://www.msi.com/product/mb/Z77A-G45.html#/?div=Driver&os=Win7%2064
    I don't see anything about the Sound Blaster Cinema 
    http://www.msi.com/product/mb/Z77A-G45.html#/?div=Overview
    Did you mean the z87-g45 gaming? http://www.msi.com/product/mb/Z87-G45-GAMING.html

  • "No Audio Device Available" - Vi

    My uncle bought the external sound blaster assuming it would work with windows vista, since it says this on the box... however as it turns out the disc doesnt carry the correct drivers... anyway, i've downloaded and installed these onto his laptop, and they all appear in mmsys.cpl with the heading "working properly" ... however, when I try to open creative smart recorder i'm told there is no audio device available, and the creative diagnostic says that hardware has not been detected, despite the fact that it is plugged into a USB port and the power light on the SB box is on. Has anyone else had this problem and figured out how to solve it's I've tried different combinations of inputs and had no luck and am running out of ideas. Also, when I play cassettes from the hi-fi, plugged into the line in on the sound blaster, then plug headphones into the phones jack, there is no output from that either. Any possible help that can be offered is much appreciated?thanks - dan

    I've recently had the same trouble and still haven't solved it.
    I have the "li've 24" usb soundblaster which worked fine on my previous computer running on Windows XP home. When I connected it to a new PC using Vista 32 bits it "created" all manner of problems, all of which I eventually resolved apart from the inability to use the smart recorder. It gives an error message that it can't find a device, which is obviously stupid as everything else works. I have tried running this part of the application in Windows XP compatibility mode but it makes no difference. I have virtually given up trying unless someone out there knows of a solution. As things are, it's a real nuisance not having this facility.

  • Smart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"

    LSmart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"nI've got Windows 7 Ultimate 64 bit and a Creative Audigy 2 ZS. They've worked fine together, but I recently tried to install the programs that come on the CD and I can't get Smart Recorder to work.
    It has a message saying "There is no audio device available on the system. The application will now close."? I checked my control panel and it definitely shows a my Audigy 2.
    I found an old post that suggested using the CTZAPXX.EXE on the CD, but it didn't do anything. I watched the CPU go to 50% usage, but nothing happened for minutes. (http://forums.creative.com/t5/Sound-Blaster/Speaker-settings/m-p/40229)
    How can I fix this problem with Smart Recorder?
    Thanks,
    Mike

    Is it time to upgrade to X-Fi or another brand?

  • Are there any video capture devices available on Linux?

    Are there any video capture devices available on Linux?

    If you have a tv tuner card with either an s-video or av/ composite connection, then you can use that under linux with a digital video camera (dv camera). I can help if you are interested. Hope this helps!

  • "no devices available" when connecting USB-9231

    I use USB-9213 to gather temperature information. But the SignalExpress just can not find the devices. It shows No devices available.
    I don't know why. I have installed Labview2012, DAQmx9.9, NI MAX5.6.  The devices can be find by the NI MAX.But  can't test the device.
    Also, the  VISA Test Panel shows some problem about the attributions.(the last one, maybe: no proper initialized, I can't remember clearly.)
    If anyone could help solve this problem? Thanks.
    Attachments:
    problem.JPG ‏81 KB

    Since it does not work properly will all your iDevices, I suspect a problem with your Bose.

Maybe you are looking for

  • I need help puting movies on my ipod

    I am up to date with everything such as itunes and quicktime i need to know how to make the format of my quicktime files into mpeg4's because when i load my videos in to the ipod a error comes up saying your ipod cannot do this i have and ipod video

  • CRM 2013 error when adding a new appointment in Outlook.

    When added NEW DEADLINE The outlook on the calendar, I received an error in CRM. /////ERROR////////////////////////////////////////////////////////////////////////////////////////// [2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-

  • Can't add new image field in SRM MDM catalog

    Dear Experts I have added a new lookup[image] field in Catalog Item table. The problem is I cant find it in my MDM_SRM_UI_App>Customize Display tab>SRM-MDM Repository fields list Can't we add custom fields to repository? I also read this SAP Note 102

  • Flash CS3 doesn't show some fonts.

    Some fonts that I'm trying to use in Flash CS3 aren't showing up. Specifically, these fonts are Peter Saville's New Order line of different typefaces. Font Book only shows errors for one of the fonts (N.O.– Movement). This is the specific font I want

  • Preloader for a slide presentation

    I have created an online comic using the slide presentation method so that people can move forward and backward through the comic...however I am needing to upload this with a preloader at the beginning so people can see the progress of the download.