LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

Hello,
We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
- WS-C6505E-SUP2T
- WS-X6824-SFP-2T
There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
Do you have this issue as well ? Any direction or help ?
I am afraid of a potential bug...
Rgds,
Yoann

When you were placing the internal test calls, where was your phone located?   The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A?   Are these working fine?   If not, then it's likely you do have a QoS issue over the WAN to Site A.
Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
Kind regards,
Craig

Similar Messages

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • Connection issue with Gift Card

    Hi everybody,
    I have a problem when trying to connect to iTunes Store to redeem a gift card. Whenever I push button "use code" (please apologize for translation: I'm using the italian version), I get a message saying that iTunes Store could be busy and I should verify Internet connection.
    But when I run iTunes Diagnostics everything is OK.
    The issue won't happen (I think) if I buy a song normally.
    I'm using the newest version of iTunes (7.3.1.3) and I've de-activate Widnows Firewall but the problem still occurs.
    Do you have any suggestions?
    Thank you in advance
    Riccardo

    Hello there sam234,
    Gift cards are always awesome to purchase, and even better to receive! I’m sad to hear that you seem to be having continued issues with one you may have purchased from us. Generally speaking, we can usually resolve the issues with gift cards, especially if they are Best Buy gift cards.
    That being said, I am sending you a private message to gather further details about the $50 gift card you seem to be having troubles with. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
    Sincerely, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Disable all optimization on an WAE with inline card

    Hi all,
    What is the best way to disable all optimization on an WAE with inline card?
    I don’t want to power off the device.
    Best regards,
    Jan Rockstedt

    Jan,
    The easiest way to bypass WAAS acceleration when deployed inline are to shutdown the inlinegroup interfaces.  This will force the inlinegroup into physical bypass.
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v417/configuration/guide/traffic.html#wp1062535
    Regards,
    Mike Korenbaum
    Cisco WAAS PDI Help Desk - http://www.cisco.com/go/pdihelpdesk

  • GDM and Gnome graphical issues with Nvidia card

    Hi !
    I want to install archlinux with cinnamon as desktop environment on the computer of a friend, but I have some issue with it, and especially with (I think) the graphic card, it's a Nvidia GeForce FX 5200LE.
    I tried installing nvidia-173xx from the aur first. I installed gdm, but it's extremly slow, as a result that I can't log in (nevertheless the mouse is fluid..)  the cpu is not so much used yet, and it's the same thing in the cinnamon session or the gnome session (I tried installing lightdm to log in which works fine). Moreover, in the session I've got some strange graphical things, such as some missing white pixels, or a blue window when I launch nautilus, ... (here are some screenshots : http://i49.tinypic.com/2efhm6s.png and a with a window : http://i46.tinypic.com/116m05k.png)
    I tried to install the nouveau driver instead, and now gdm don't freeze, I can log in, but there is always these strange graphical issues.
    Is the graphic card too old for gnome ? Or did I forget something ?
    Thank you in advance for your help !! And sorry for my english ..
    Here are some log with the nouveau driver :
    - Xorg.log :
    [ 9.026]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 9.026] X Protocol Version 11, Revision 0
    [ 9.026] Build Operating System: Linux 3.4.8-1-ARCH i686
    [ 9.026] Current Operating System: Linux famille-workstation 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
    [ 9.026] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=83840f06-da6c-4558-a8ef-8ed779442ff3 ro quiet pci=nomsi
    [ 9.026] Build Date: 27 August 2012 08:08:29AM
    [ 9.026]
    [ 9.026] Current version of pixman: 0.26.2
    [ 9.026] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 9.026] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 9.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 13:26:01 2012
    [ 9.053] (==) Using config file: "/etc/X11/xorg.conf"
    [ 9.053] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 9.072] (==) No Layout section. Using the first Screen section.
    [ 9.072] (==) No screen section available. Using defaults.
    [ 9.072] (**) |-->Screen "Default Screen Section" (0)
    [ 9.072] (**) | |-->Monitor "<default monitor>"
    [ 9.074] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 9.074] (**) Option "AIGLX" "off"
    [ 9.074] (==) Automatically adding devices
    [ 9.074] (==) Automatically enabling devices
    [ 9.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 9.127] Entry deleted from font path.
    [ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 9.128] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
    [ 9.128] Entry deleted from font path.
    [ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
    [ 9.128] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 9.128] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 9.128] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 9.128] (II) Loader magic: 0x82225a0
    [ 9.128] (II) Module ABI versions:
    [ 9.128] X.Org ANSI C Emulation: 0.4
    [ 9.128] X.Org Video Driver: 12.1
    [ 9.128] X.Org XInput driver : 16.0
    [ 9.128] X.Org Server Extension : 6.0
    [ 9.129] (--) PCI:*(0:1:0:0) 10de:0323:107d:1334 rev 161, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
    [ 9.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 9.129] (II) LoadModule: "extmod"
    [ 9.145] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 9.156] (II) Module extmod: vendor="X.Org Foundation"
    [ 9.156] compiled for 1.12.4, module version = 1.0.0
    [ 9.156] Module class: X.Org Server Extension
    [ 9.156] ABI class: X.Org Server Extension, version 6.0
    [ 9.156] (II) Loading extension MIT-SCREEN-SAVER
    [ 9.156] (II) Loading extension XFree86-VidModeExtension
    [ 9.156] (II) Loading extension XFree86-DGA
    [ 9.156] (II) Loading extension DPMS
    [ 9.156] (II) Loading extension XVideo
    [ 9.156] (II) Loading extension XVideo-MotionCompensation
    [ 9.156] (II) Loading extension X-Resource
    [ 9.156] (II) LoadModule: "dbe"
    [ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 9.157] (II) Module dbe: vendor="X.Org Foundation"
    [ 9.157] compiled for 1.12.4, module version = 1.0.0
    [ 9.157] Module class: X.Org Server Extension
    [ 9.157] ABI class: X.Org Server Extension, version 6.0
    [ 9.157] (II) Loading extension DOUBLE-BUFFER
    [ 9.157] (II) LoadModule: "glx"
    [ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 9.164] (II) Module glx: vendor="X.Org Foundation"
    [ 9.164] compiled for 1.12.4, module version = 1.0.0
    [ 9.164] ABI class: X.Org Server Extension, version 6.0
    [ 9.164] (**) AIGLX disabled
    [ 9.165] (II) Loading extension GLX
    [ 9.165] (II) LoadModule: "record"
    [ 9.165] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 9.166] (II) Module record: vendor="X.Org Foundation"
    [ 9.166] compiled for 1.12.4, module version = 1.13.0
    [ 9.166] Module class: X.Org Server Extension
    [ 9.166] ABI class: X.Org Server Extension, version 6.0
    [ 9.166] (II) Loading extension RECORD
    [ 9.166] (II) LoadModule: "dri"
    [ 9.166] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 9.172] (II) Module dri: vendor="X.Org Foundation"
    [ 9.172] compiled for 1.12.4, module version = 1.0.0
    [ 9.172] ABI class: X.Org Server Extension, version 6.0
    [ 9.172] (II) Loading extension XFree86-DRI
    [ 9.172] (II) LoadModule: "dri2"
    [ 9.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 9.173] (II) Module dri2: vendor="X.Org Foundation"
    [ 9.173] compiled for 1.12.4, module version = 1.2.0
    [ 9.173] ABI class: X.Org Server Extension, version 6.0
    [ 9.173] (II) Loading extension DRI2
    [ 9.173] (==) Matched nouveau as autoconfigured driver 0
    [ 9.173] (==) Matched nvidia as autoconfigured driver 1
    [ 9.173] (==) Matched nv as autoconfigured driver 2
    [ 9.173] (==) Matched vesa as autoconfigured driver 3
    [ 9.173] (==) Matched fbdev as autoconfigured driver 4
    [ 9.173] (==) Assigned the driver to the xf86ConfigLayout
    [ 9.173] (II) LoadModule: "nouveau"
    [ 9.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 9.191] (II) Module nouveau: vendor="X.Org Foundation"
    [ 9.191] compiled for 1.12.2, module version = 1.0.1
    [ 9.191] Module class: X.Org Video Driver
    [ 9.191] ABI class: X.Org Video Driver, version 12.0
    [ 9.191] (II) LoadModule: "nvidia"
    [ 9.191] (WW) Warning, couldn't open module nvidia
    [ 9.191] (II) UnloadModule: "nvidia"
    [ 9.191] (II) Unloading nvidia
    [ 9.192] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "nv"
    [ 9.192] (WW) Warning, couldn't open module nv
    [ 9.192] (II) UnloadModule: "nv"
    [ 9.192] (II) Unloading nv
    [ 9.192] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "vesa"
    [ 9.192] (WW) Warning, couldn't open module vesa
    [ 9.192] (II) UnloadModule: "vesa"
    [ 9.192] (II) Unloading vesa
    [ 9.192] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "fbdev"
    [ 9.193] (WW) Warning, couldn't open module fbdev
    [ 9.193] (II) UnloadModule: "fbdev"
    [ 9.193] (II) Unloading fbdev
    [ 9.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 9.193] (II) NOUVEAU driver
    [ 9.193] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 9.193] RIVA TNT (NV04)
    [ 9.193] RIVA TNT2 (NV05)
    [ 9.193] GeForce 256 (NV10)
    [ 9.193] GeForce 2 (NV11, NV15)
    [ 9.193] GeForce 4MX (NV17, NV18)
    [ 9.193] GeForce 3 (NV20)
    [ 9.193] GeForce 4Ti (NV25, NV28)
    [ 9.193] GeForce FX (NV3x)
    [ 9.193] GeForce 6 (NV4x)
    [ 9.193] GeForce 7 (G7x)
    [ 9.193] GeForce 8 (G8x)
    [ 9.193] GeForce GTX 200 (NVA0)
    [ 9.193] GeForce GTX 400 (NVC0)
    [ 9.193] (++) using VT number 7
    [ 9.196] drmOpenDevice: node name is /dev/dri/card0
    [ 9.196] drmOpenDevice: open result is 7, (OK)
    [ 9.196] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 9.196] drmOpenDevice: node name is /dev/dri/card0
    [ 9.196] drmOpenDevice: open result is 7, (OK)
    [ 9.196] drmOpenByBusid: drmOpenMinor returns 7
    [ 9.196] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 9.196] (II) [drm] nouveau interface version: 1.0.0
    [ 9.196] (II) Loading sub module "dri"
    [ 9.196] (II) LoadModule: "dri"
    [ 9.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 9.197] (II) Module dri: vendor="X.Org Foundation"
    [ 9.197] compiled for 1.12.4, module version = 1.0.0
    [ 9.197] ABI class: X.Org Server Extension, version 6.0
    [ 9.197] (II) NOUVEAU(0): Loaded DRI module
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenByBusid: drmOpenMinor returns 8
    [ 9.197] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 9.197] (II) [drm] DRM interface version 1.4
    [ 9.197] (II) [drm] DRM open master succeeded.
    [ 9.197] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
    [ 9.197] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 9.197] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 9.197] (==) NOUVEAU(0): RGB weight 888
    [ 9.197] (==) NOUVEAU(0): Default visual is TrueColor
    [ 9.197] (==) NOUVEAU(0): Using HW cursor
    [ 9.197] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 9.197] (==) NOUVEAU(0): Page flipping enabled
    [ 9.197] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 9.227] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 9.280] (II) NOUVEAU(0): Output TV-1 has no monitor section
    [ 9.309] (II) NOUVEAU(0): EDID for output VGA-1
    [ 9.309] (II) NOUVEAU(0): Manufacturer: SAM Model: 1b Serial#: 1195913527
    [ 9.309] (II) NOUVEAU(0): Year: 2003 Week: 16
    [ 9.309] (II) NOUVEAU(0): EDID Version: 1.3
    [ 9.309] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 9.309] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
    [ 9.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 9.309] (II) NOUVEAU(0): Gamma: 2.40
    [ 9.309] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 9.309] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 9.309] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
    [ 9.309] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
    [ 9.309] (II) NOUVEAU(0): Supported established timings:
    [ 9.309] (II) NOUVEAU(0): 720x400@70Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@60Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@67Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@72Hz
    [ 9.310] (II) NOUVEAU(0): 640x480@75Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@56Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@60Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@72Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@75Hz
    [ 9.310] (II) NOUVEAU(0): 832x624@75Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@60Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@70Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@75Hz
    [ 9.310] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 9.310] (II) NOUVEAU(0): 1152x864@75Hz
    [ 9.310] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 9.310] (II) NOUVEAU(0): Supported standard timings:
    [ 9.310] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 9.310] (II) NOUVEAU(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    [ 9.310] (II) NOUVEAU(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
    [ 9.310] (II) NOUVEAU(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
    [ 9.310] (II) NOUVEAU(0): Supported detailed timing:
    [ 9.310] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
    [ 9.310] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 9.310] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 9.310] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 9.310] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 9.310] (II) NOUVEAU(0): Serial No: HJGW403719
    [ 9.310] (II) NOUVEAU(0): EDID (in hex):
    [ 9.310] (II) NOUVEAU(0): 00ffffffffffff004c2d1b0037314847
    [ 9.310] (II) NOUVEAU(0): 100d01030f221b8cea6f8ba25a4d9424
    [ 9.310] (II) NOUVEAU(0): 1a5156bfef8081806140454031400101
    [ 9.310] (II) NOUVEAU(0): 010101010101302a009851002a403070
    [ 9.310] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
    [ 9.310] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
    [ 9.310] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 9.310] (II) NOUVEAU(0): 00484a47573430333731390a20200057
    [ 9.310] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 9.310] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 9.310] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 9.310] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 9.310] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 9.311] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.363] (II) NOUVEAU(0): EDID for output TV-1
    [ 9.363] (II) NOUVEAU(0): Output VGA-1 connected
    [ 9.363] (II) NOUVEAU(0): Output TV-1 disconnected
    [ 9.363] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 9.363] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
    [ 9.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 9.363] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.364] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 9.364] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
    [ 9.364] (**) NOUVEAU(0): DPI set to (95, 96)
    [ 9.364] (II) Loading sub module "fb"
    [ 9.364] (II) LoadModule: "fb"
    [ 9.364] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 9.375] (II) Module fb: vendor="X.Org Foundation"
    [ 9.375] compiled for 1.12.4, module version = 1.0.0
    [ 9.375] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 9.375] (II) Loading sub module "exa"
    [ 9.375] (II) LoadModule: "exa"
    [ 9.376] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 9.380] (II) Module exa: vendor="X.Org Foundation"
    [ 9.380] compiled for 1.12.4, module version = 2.5.0
    [ 9.380] ABI class: X.Org Video Driver, version 12.1
    [ 9.380] (II) Loading sub module "shadowfb"
    [ 9.380] (II) LoadModule: "shadowfb"
    [ 9.380] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 9.382] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 9.382] compiled for 1.12.4, module version = 1.0.0
    [ 9.382] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 9.382] (--) Depth 24 pixmap format is 32 bpp
    [ 9.382] (II) NOUVEAU(0): Opened GPU channel 1
    [ 9.384] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 9.384] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 9.384] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 9.399] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 9.399] (II) EXA(0): Driver registered support for the following operations:
    [ 9.399] (II) Solid
    [ 9.399] (II) Copy
    [ 9.399] (II) Composite (RENDER acceleration)
    [ 9.399] (II) UploadToScreen
    [ 9.399] (II) DownloadFromScreen
    [ 9.399] (==) NOUVEAU(0): Backing store disabled
    [ 9.399] (==) NOUVEAU(0): Silken mouse enabled
    [ 9.399] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
    [ 9.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 9.399] (==) NOUVEAU(0): DPMS enabled
    [ 9.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 9.399] (--) RandR disabled
    [ 9.399] (II) Initializing built-in extension Generic Event Extension
    [ 9.399] (II) Initializing built-in extension SHAPE
    [ 9.399] (II) Initializing built-in extension MIT-SHM
    [ 9.400] (II) Initializing built-in extension XInputExtension
    [ 9.400] (II) Initializing built-in extension XTEST
    [ 9.400] (II) Initializing built-in extension BIG-REQUESTS
    [ 9.400] (II) Initializing built-in extension SYNC
    [ 9.400] (II) Initializing built-in extension XKEYBOARD
    [ 9.400] (II) Initializing built-in extension XC-MISC
    [ 9.400] (II) Initializing built-in extension SECURITY
    [ 9.400] (II) Initializing built-in extension XINERAMA
    [ 9.400] (II) Initializing built-in extension XFIXES
    [ 9.400] (II) Initializing built-in extension RENDER
    [ 9.400] (II) Initializing built-in extension RANDR
    [ 9.400] (II) Initializing built-in extension COMPOSITE
    [ 9.400] (II) Initializing built-in extension DAMAGE
    [ 9.800] (II) AIGLX: Loaded and initialized swrast
    [ 9.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 9.807] (II) NOUVEAU(0): NVEnterVT is called.
    [ 9.807] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
    [ 9.807] resize called 1280 1024
    [ 10.066] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 10.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10.066] (II) LoadModule: "evdev"
    [ 10.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 10.075] (II) Module evdev: vendor="X.Org Foundation"
    [ 10.075] compiled for 1.12.3.901, module version = 2.7.3
    [ 10.075] Module class: X.Org XInput Driver
    [ 10.075] ABI class: X.Org XInput driver, version 16.0
    [ 10.075] (II) Using input driver 'evdev' for 'Power Button'
    [ 10.076] (**) Power Button: always reports core events
    [ 10.076] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 10.076] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10.076] (--) evdev: Power Button: Found keys
    [ 10.076] (II) evdev: Power Button: Configuring as keyboard
    [ 10.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 10.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 10.076] (**) Option "xkb_rules" "evdev"
    [ 10.076] (**) Option "xkb_model" "evdev"
    [ 10.076] (**) Option "xkb_layout" "us"
    [ 10.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 10.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10.117] (II) Using input driver 'evdev' for 'Power Button'
    [ 10.117] (**) Power Button: always reports core events
    [ 10.117] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 10.118] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10.118] (--) evdev: Power Button: Found keys
    [ 10.118] (II) evdev: Power Button: Configuring as keyboard
    [ 10.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 10.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 10.118] (**) Option "xkb_rules" "evdev"
    [ 10.118] (**) Option "xkb_model" "evdev"
    [ 10.118] (**) Option "xkb_layout" "us"
    [ 10.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 10.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 10.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 10.119] (**) AT Translated Set 2 keyboard: always reports core events
    [ 10.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 10.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 10.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 10.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 10.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 10.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 10.119] (**) Option "xkb_rules" "evdev"
    [ 10.119] (**) Option "xkb_model" "evdev"
    [ 10.119] (**) Option "xkb_layout" "us"
    [ 10.120] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 10.120] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 10.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
    [ 10.120] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
    [ 10.121] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
    [ 10.121] (II) No input driver specified, ignoring this device.
    [ 10.121] (II) This device may have been added with another device file.
    [ 10.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 10.121] (II) No input driver specified, ignoring this device.
    [ 10.121] (II) This device may have been added with another device file.
    [ 10.174] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 10.174] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 10.174] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 10.174] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 14.960] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 14.960] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 14.960] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 14.960] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 14.960] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 84.256] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 111.559] (II) NOUVEAU(0): NVEnterVT is called.
    [ 111.601] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 111.601] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 111.601] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 111.601] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 111.601] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 119.891] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 119.891] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 119.891] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 119.892] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 119.892] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 121.162] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 121.162] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 121.162] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 121.163] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 121.163] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 122.743] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 122.743] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 122.743] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 122.744] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 122.744] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 138.896] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 167.669] (II) NOUVEAU(0): NVEnterVT is called.
    [ 167.720] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 167.720] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 167.720] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 167.720] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 186.390] (II) NOUVEAU(0): NVLeaveVT is called.
    - .xsession-errors in gnome session :
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
    SSH_AUTH_SOCK=/home/olivier/.cache/keyring-D3uSoF/ssh
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    Failed to play sound: File or data not found
    ** Message: applet now removed from the notification area
    ** Message: applet now embedded in the notification area
    Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
    Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    (gnome-shell:700): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
    Individuals will not be linked properly and creating new links between Personas will not work.
    The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    (gnome-settings-daemon:657): color-plugin-WARNING **: Done switch to new account, reload devices
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    Last edited by Jejel59 (2012-09-06 11:34:53)

    I'm no expert on reading the xsession errors, but I had all sorts of problems running gnome3 with my machine of the same vintage.   Cinamon is based on gnome3.  I switched to Mate which is a re-packaging of the old gnome2 along with Compiz for the window manager and all works well.
    I strongly suspect that they are using the newer OpenGL 4 API.  The Nvidia FX5200 is stuck at OpenGL 2.1.

  • H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

    Specs
    Case - CoolerMaster CMP 350 w/500 Watt PSU
    Motherboard - MSI H67A-G43 (B3)
    Processor - Intel i7-2600
    Memory - 16GB (4x4GB) DDR3 1333
    Hard Drive - Western Digital Caviar Green 1TB SATA 2
    Video - *multiple cards tested
    Issue
    OS Installation
    Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
    Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
    Video Card - MSI N430 GT - Computer does not POST.
    Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version.  Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
    Attempted Resolutions
    As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
    We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP.  However, we have previously used the H67A-G43 boards with no issues.  We would like to be able to use these motherboards on future builds.  What possible solutions are there for these issues?

    Quote from: HU16E on 20-April-12, 03:32:27
    Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
    Results
    1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed.  Still works correctly with Integrated.
    1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card.  Using Integrated video, works correctly.
    This is on an unflashed H67A-G43 (B3) new out of the box.

  • Z68A-GD55(G3) BIOS Issue With Graphics Card

    I have been having a strange issue with the BIOS. When I use my graphics card it appears all glitched. (see below picture) When the graphics card is removed it appears fine using onboard graphics.
    Processor: Intel Core i7 2600k
    RAM: 2x4GB Corsair Vengeance 1600MHz
    Graphics Card: MSI HD 6950 2GB Twin Frozr III
    PSU: Corsair TX850M
    Hard Drive: ADATA 60GB SSD

    What screen connection are you using ? Can you try a normal d-Sub connection to start with ?
    Also suggest you do a CMOS clear after the connection.
    What did you use before this card and did you clean all old drivers before installing the new card ?>>Driver Sweeper<<

  • Are there known issues with graphics cards?

    I have an Intel Core i7 2.66 GHz with 8GB of RAM and a graphics card with
    Intel HD Graphics
      Type:    GPU
      Bus:    Built-In
      VRAM (Total):    288 MB
      Vendor:    Intel (0x8086)
      Device ID:    0x0046
      Revision ID:    0x0018
      gMux Version:    1.9.21
    My screen occassionaly gets completely scrambled, where I move the trackpad and windows and other things will ghosted items will materialize in the background, though I am unable to click on anything or do anything, so I have to cut the power. This happens when I only have 1 or maybe 2 programs open.
    Are there any known issues with the graphics cards on these Macbook Pros? Anyone know what might be causing it?
    Thanks.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Having issues with your Card Readers in Windows 7 not working? Here's resolution!

    You do not need drivers for the card reader. There are NO Windows 7 drivers.
    (1.) Click on the Start button and then choose Control Panel.
    (2.) Click on the Administrative Tools a window will open.
    (3.) In the Administrative Tools window, double-click on the Computer Management
    (4.)  When Computer Management opens, click on Disk Management on the left side of the window, located under Storage. 
    (5.) This is where you will see Drives listed. The Card Reader will be listed as 1-4. Just right click & assign Drive Letter.
    Right click on each of the drives 1-4 and assign a Drive Letter. Now place your SD card in the correct slot and an a pop up for auto play will show. Now you reader works and will also show when you open COMPUTER it will show them as removable drives with proper drive letters. It took me several days to figure out after no help from HP or internet search. So when found the drives listed I just right clicked saw assign drive and it worked. Hope a lot of people searching on internet find this reply so that it will help them get there card reader working again under Windows 7 because even there tech's don't have an answer. Well good luck because this will work!!!

    owj wrote:
    I followed the steps but did not see drive 1, 2, 3, 4.  I see C; Jbackup drive, D: CD/DVD.  I'm still not able to get the card reader to recognize an inserted card.
    HP notebook 10''
    I'm having trouble with my card reader. I been thro steps mentioned in HP forum but only C:drive is listed .
    I had a problem with the hard drive earlier this year had to reinstall windows 7home premium from a disc unable to activate system restore.
    Ian Barrow

  • Duplex problem with inline card "WAN0" again

    Hi,
    We got duplex problem again "new site" for the inline port WAN0, LAN0 is ok.
    We have tried crossover and straight through cable, without any look still 100/ half duplex.
    The PTT router int fa0/0 have been to 100/full and auto/auto still 100 half in the WAE.
    The WAE have been in 100/full, no link or auto/auto link but 100/half.
    What can be the problem, as we have this issue with most of our 574 and 274, the 674 have have no problem at all?
    Below are some output from the WAE and router.
    PTT router:
    #sh ver
    Cisco IOS Software, 1841 Software (C1841-SPSERVICESK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Thu 29-Mar-07 03:29 by khuie
    ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
    Router uptime is 5 weeks, 1 day, 5 minutes
    System returned to ROM by power-on
    System restarted at 08:09:29 GMT Sun Aug 15 2010
    System image file is "flash:c1841-spservicesk9-mz.124-6.T7.bin"
    Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.
    Processor board ID FCZ112411HV
    2 FastEthernet interfaces
    1 Serial interface
    1 Serial(sync/async) interface
    1 Channelized E1/PRI port
    DRAM configuration is 64 bits wide with parity disabled.
    191K bytes of NVRAM.
    63488K bytes of ATA CompactFlash (Read/Write)
    Configuration register is 0x2102
    #sh int fa0/0
    FastEthernet0/0 is up, line protocol is up
      Hardware is Gt96k FE, address is 001b.d5ab.3fc8 (bia 001b.d5ab.3fc8)
      Internet address is 10.252.105.12/22
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Half-duplex, 100Mb/s, 100BaseTX/FX
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:00, output 00:00:00, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 103000 bits/sec, 89 packets/sec
      5 minute output rate 625000 bits/sec, 93 packets/sec
         110094543 packets input, 2604076581 bytes
         Received 10013739 broadcasts, 0 runts, 0 giants, 0 throttles
         21 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog
         0 input packets with dribble condition detected
         110416771 packets output, 4153304953 bytes, 0 underruns
         149371 output errors, 113762 collisions, 149376 interface resets
         0 babbles, 149940 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    From the WAE:
    #sh interface inlineport  InlineGroup 1/0/wan
                                         ^
    % Invalid input detected at '^' marker.
    ZAJOPWAAS01#sh interface inlineport  1/0/wan
    Device name        : eth4. Bypass master interface.
    Packets Received   : 59466951
    Packets Intercepted: 50007028
    Packets Bridged    : 10002103
    Packets Forwarded  : 44722188
    Packets Dropped    : 69
    Packets Received on native      : 0
    Active flows for this interface : 0
    Ethernet Driver Status
    Type:Ethernet
    Ethernet address:00:E0:ED:11:E5:A8
    Maximum Transfer Unit Size:1500
    Metric:1
    Packets Received: 59466909
    Input Errors: 0
    Input Packets Dropped: 0
    Input Packets Overruns: 0
    Input Packets Frames: 0
    Packet Sent: 64238956
    Output Errors: 116996
    Output Packets Dropped: 0
    Output Packets Overruns: 0
    Output Packets Carrier: 116996
    Output Queue Length:100
    Collisions: 182840
    Base address:0x5000
    Flags:UP BROADCAST RUNNING MULTICAST
    Link State: Interface is up,line protocol up
    Mode: autoselect, half-duplex, 100baseTX
    1#sh ver
    Cisco Wide Area Application Services Software (WAAS)
    Copyright (c) 1999-2010 by Cisco Systems, Inc.
    Cisco Wide Area Application Services (WAAS-UNIVERSAL-K9) Software Release 4.2.1
    (build b38 Jun 16 2010)
    Version: oe574-4.2.1.38
    Compiled 20:44:26 Jun 16 2010 by damaster
    Device Id: 00:26:55:ad:cd:04
    System was restarted on Mon Aug 30 16:48:52 2010.
    The system has been up for 2 weeks, 6 days, 17 hours, 52 minutes, 10 seconds.
    Jan Rockstedt

    Hi Jan,
    If you are connecting Router to WAN0_0 port, you should use cross-over cable under most of the circumstances and unless you are using all gig interfaces on both sides. This will avoid any hardware limitations due to non-Auto-MDIX supported hardware.
    Cisco strongly recommend that you do not use half-duplex connections on the WAE or on routers, switches, or other devices.
    You will find more information here: Cabling
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/wae/module/inline/installation/guide/17880fru.html#wp39911
    Further, there is a possibility that the interface on Router / WAE inline adapater / cable might be bad. I would suggest following in that case.
    1. Using a new cross-over / stright cable. if the issue continues, proble lies on the interface sides.
    2. Using a different port on router. if the issue continues, problem is with WAN0_0 port of WAE.
    3. Try connecting wan0_0 port to another switch / router to see if it negotiates at full duplex. If it still continues at half duplex, there is an issue with WAN0_0 port most probably.
    4. Try connecting secondary gig port or WAN0_1 port to same router interface. If the issue continues, problem may be with router FA0/0 interface.
    If you find that issue is with either router / WAE inline interface, please open a TAC case for RMA.
    Hope this helps.
    Regards.
    PS: If this resolves your issue, please mark this as Answered.

  • LMS 3.2 Campus Manager Topology Issue with C450X-E

    We replaced catalysts catOS 6509 by c4503-E and C4506-E in the network.
    Since that replacement, 2 links gigaethernet bundled in an etherchannel disappeared from Campus Manager Topology maps (vtp and layer maps).
    These links were drawn with 6509 in the old maps but not now with 450X-E.
    We have also 235 other switches without any problems.
    The links are up and each switch is seeing its neighbour by cdp on each link. No discrepancies found for these links.
    I have done a reinit of ANI database by reinitdb.pl -restore and restart a complete discovery and data collection.
    The issue is the same.
    Campus Manager Version is 5.2.1 with CSCtd49439 installed
    CMDeviceUpdate Version is 13.0
    C450X-E IOS version is 12.2(53)SG2
    In the file "campus\etc\cwsi\portsData.xml"  the links do not appear that means they are not discovered.
    In Device Center, each switch is seeing the other switch as a neighbour.
    Do someone has any idea on that issue ?
    Thanks.

    Hi,
    I have the same problem.
    I'm sorry but I'm not used to the TAC and I can't find where I can download the patch.
    Can you tell me what is the procedure to get this patch ?
    thank in advance
    Nicolas

  • Issue with Inline View Criteria

    Hi,
    I have a VO created on two tables that are joined by a 1:1 association(say Opportunity and Revenue). The query is specified in Expert mode because I need some aggregations performed using analytic functions. Data security predicates are applied on top of this query using a dummy View Criteria. My requirement now is that I need to filter these results using another VC. The issue is that both the tables have attributes with the same name(say Cust ID) and I need to filter based on this using an inline View Criteria. I have done the same declaratively. However, I get an error on hitting the page saying the columns have been ambiguously defined.
    On digging through the log, I discovered the test Query fails to prefix the alias before the attribute. So what I get is something similar to this
    select (o.id, r.amt, sum(), count(), avg(), o.custId) from opty o, revn r where (o.id in DATA SECURITY PREDICATE) and (custId = :bindCustId)
    Is there a way to ensure that the custId can be changed to o.custId???
    Note - The View Criteria was created on an attribute from opty table that was exposed i.e in this case, o.custId. Although the query builder shows it correctly while creating the VC declaratively, the issue persists as seen from the logs.
    Thanks,
    Manoj

    Hi experts...
    Any pointers to this issue???
    Please help!
    Regards,
    Debolina

  • Crashing issue with dual cards not in SLI mode

    Running CS6 on a HPZ820 with 64GB RAM and TWO Nividia Quadro4000s... having some crashing issues - DisplaySurface.dll error. I am NOT running cards in SLI mode. Any ideas? I have some NewBlueFX plug-ins that I disabled the GPU - that helped. But now it started crashing again with same error. System was built up to specs.
    Any advice?

    Does it crash if you remove one of the cards?

  • ISSUES WITH GIFT CARD BALANCE?!

    I ALWAYS BUY SONGS WITH STORE BOUGHT GIFT CARDS AND I'VE NEVER HAD A PROBLEM UNTIL TONIGHT. I DO THIS SO I DON'T HAVE TO PROVIDE MY CREDIT CARD INFO ON THE COMPUTER. WELL, I DOWNLOADED A NEW GIFT CARD TO BUY SOME NEW SONGS. ITS NOT TAKING IT OUT OF MY ITUNES STORE BALANCE AND REQUIRING MY CREDIT CARD AS A PAYMENT?? IS ANYBODY ELSE HAVING THIS ISSUE??

    I just recently added a gift card - I try to purchase a song and goes back to my billing account! How can I use my gift card that I had already added the code but and now when pick a song it brings me back to my billing so I enter in Gift certificate and try to use my gift card - it says it is already been redeemed! Thank you!

  • Issues with inlined textEditor (TextArea) in AdvancedDataGridColumn

    Hello,
    I have an AdvancedDataGrid with three columns, populated by a dataProvider ArrayCollection (called mappedTagsArray) with the fields callerIntent, labels, and strategy. The labels column needs to display one or more lines. Currently, the data for this column is a String with the multiple values separated by the "\n" character.
    Here are the relevant pieces of the code (I did not include the function definitions b/c they are not relevant to the issues):
    [CODE][Bindable]
    public var mappedTagsArray:ArrayCollection = new ArrayCollection( [
        { callerIntent: "cancel-vague", labels: "cancel-vague", strategy: "Menu" },
        { callerIntent: "complain-bill_amount", labels: "complain-bill\ncomplain-bill_amount", strategy: "YesNo" },
        { callerIntent: "enquire-postpaid", labels: "enquire-postpaid\nvague-postpaid", strategy: "AskAgain" },
        { callerIntent: "enquire-sms", labels: "enquire-sms", strategy: "Direct" },
        { callerIntent: "garbage-garbage", labels: "garbage-flirt\ngarbage-garbage\ngarbage-noise\ngarbage-profanity", strategy: "Fallback" },
        { callerIntent: "report-sim", labels: "enquire-sim\nreport-sim", strategy: "Direct" }
    <s:Group id="mappedTagsData" height="100%" width="35%">
        <s:Group top="0" width="100%" height="30">
            <s:Rect width="100%" height="100%">
                <s:fill><s:SolidColor color="0xDCDCDC" /></s:fill>
            </s:Rect>
            <mx:Button id="addDestinationTag" left="5" verticalCenter="0" width="36" icon="@Embed(source='/assets/images/misc/PlusSignGreen_small.gif')" toolTip="Create new destination" click="btnAddDestinationTag_clickHandler( event )"/>
        </s:Group>
        <mx:AdvancedDataGrid id="mappedTagsGrid" height="100%" width="100%" top="30" editable="true" wordWrap="true" designViewDataType="flat" dataProvider="{mappedTagsArray}" itemClick="mappedTagsGrid_itemClickHandler( event )"  doubleClickEnabled="true" itemDoubleClick="mappedTagsGrid_itemDoubleClickHandler( event )">
            <mx:columns>
                <mx:AdvancedDataGridColumn id="destinationTag" headerText="Caller Intent" dataField="callerIntent"/>
                <mx:AdvancedDataGridColumn id="semanticTags" headerText="Labels" dataField="labels" editable="false">
                    <mx:itemRenderer>
                        <fx:Component>
                            <mx:HBox horizontalScrollPolicy="off" verticalScrollPolicy="off" top="0" bottom="0" right="0" left="0">
                                <fx:Script>
                                    <![CDATA[
                                        public function get value() : String
                                            return ta_labels.text;
                                        override public function set data(value:Object):void
                                            super.data = value; ta_labels.text = value.labels;
                                    ]]>
                                </fx:Script>
                                <!-- BUG: Scroll bar is fixed in one location; does not move with resizing of cell -->
                                <s:TextArea id="ta_labels" heightInLines="2" editable="false" borderVisible="false" horizontalScrollPolicy="auto" verticalScrollPolicy="auto" contentBackgroundAlpha="0" top="0" bottom="0" right="0" left="0"/>
                            </mx:HBox>                                     
                        </fx:Component>
                    </mx:itemRenderer>
                </mx:AdvancedDataGridColumn>
                <mx:AdvancedDataGridColumn id="strategy" headerText="Strategy" dataField="strategy">
                    <mx:itemEditor>
                        <fx:Component>
                            <mx:ComboBox>
                                <mx:dataProvider>
                                    <s:ArrayList>
                                        <fx:String>AskAgain</fx:String>
                                            <fx:String>Direct</fx:String>
                                            <fx:String>Fallback</fx:String>
                                            <fx:String>Menu</fx:String>
                                            <fx:String>YesNo</fx:String>
                                    </s:ArrayList>
                                </mx:dataProvider>
                            </mx:ComboBox>
                        </fx:Component>
                    </mx:itemEditor>
                </mx:AdvancedDataGridColumn>
            </mx:columns>
        </mx:AdvancedDataGrid>
    </s:Group>[/CODE]
    FIRST ISSUE
    Since the labels column can display multiple lines, I want the row height to vary to accommodate the number of lines per row. I tried setting variableRowHeight="true" for the AdvancedDataGrid and not setting any height for the HBox or TextArea. However, in this case, the TextArea's default size of 188 pixels wide by 149 pixels high is used, even if the space is not required (as for only one line). Hence I was forced to set the TextArea's heightInLines="2". This activates the scroll bar if necessary.
    SECOND ISSUE
    This issue is with the vertical scroll bar. Even though I defined top="0", bottom="0", right="0", left="0" for both the HBox and TextArea, the scroll bar remains in a fixed position. Initially, it is partially hidden (first screenshot). If I reduce the column width (to the left of the scroll bar), the scroll bar no longer appears. If I expand the column width (to the right of the scroll bar), space starts appearing to the right of the scroll bar (second screenshot). The bar is not resizing along with the column width.
    Your help is much appreciated. Thank you!
    Bonnie

    You might need a custom TextArea Skin with different minWidth/Height and
    maybe take out the Scroller if you don't want it.

Maybe you are looking for