Load balancing issues?
Could someone help me with load balancing, current stats:
I have a limited understanding, but from what I can make out, we have a significant number of clients being denied association and load balancing to different AP's but then the candidate count suggests a significant number of clients that failed to load balance, presumably because there wasnt an AP available in range that wasn't busy?
Uptime is 27 days, client count can reach around 220 at busy times, 63 AP's in the building 1142's, 5508 controller. I am wondering if increasing the window size would offer a more robust solution, or will this just degrade user experience further?
I am having a number of issues with failed client association now, and devices just not being able to operate wirelessly at all
Client count reaching 25 on some AP's
I guess per radio per AP client count is more in your case, clients more than the threshold are being shown busy status ( code 17 ) by AP. Therefore, clients are unable to associate to that AP. When the number of retries are over , they are denied. I guess there are network holes as well ( no coverage b/w the cells of differenet APs ). You can increase the window count , however, it depends on the AP model finally ( max. no. of clients associated ).
Similar Messages
-
Hi all,
During our testing we are getting a load balancing issue. However, one of the agates in our network is has more CPU power than compared to the other agates in our ITS network. The memory on all the agate servers is the same.
Our current issue we are getting is the one agate that has more cpu power but acquires more sessions as compared to the other two agates. It roughly gets 60 more sessions per agate process as compare to the other Agate servers. Does having more cpu on a Agate affect the load balancing on ITS? We are on ITS patch level 19 with the Hotfix.
Thanks,
Jin BaeHello Jin,
yes, at (re)initialize the WGate retrieves the capacity from the AGates.
This is an accumulated number based on CPU performance and the number of CPUs!
The number can be seen in "wgate-status" as the "Capacity" of the AGate.
When running multiprocess Agates the number is retrieved from the MManager and also involves the number of agate-processes.
The WGate dispatches the load in proportion depending on these capacity numbers.
By my knowledge there is no way that these values can be configured (fixed).
Regards,
Fekke -
SIP load balancing issue with ACE 4710
SIP Load balancing Issue with ACE 4710
I have a Cisco ace 4710 with vesion Version A4(2.2). i configued simple SIP load balancing first without stickiness. without stikeiness we are having a problem because bye packet at the was not going to the same server all the time that left our port in used even though user hang up the phone. its happen randmly. i have a total 20 licenced ports and its fill out very quickly. so i dicided to use the stickiness with call-ID but still same issue. below is the config
rserver host CIN-VOX-31
ip address 172.20.130.31
inservice
rserver host CIN-VOX-32
ip address 172.20.130.32
inservice
serverfarm host CIN-VOX
probe SIP-5060
rserver CIN-VOX-31
inservice
rserver CIN-VOX-32
inservice
sticky sip-header Call-ID VOX_SIP_GROUP
timeout 1
timeout activeconns
replicate sticky
serverfarm CIN-VOX
class-map match-all CIN_VOX_L4_CLASS
2 match virtual-address 172.22.12.30 any
class-map match-all CIN_VOX_SIP_L4_CLASS
2 match virtual-address 172.22.12.30 udp eq sip
policy-map type loadbalance sip first-match CIN_VOX_LB_SIP_POLICY
class class-default
sticky-serverfarm VOX_SIP_GROUP
policy-map multi-match GLOBAL_DMZ_POLICY
class CIN_VOX_SIP_L4_CLASS
loadbalance vip inservice
loadbalance policy CIN_VOX_LB_SIP_POLICY
loadbalance vip icmp-reply
class CIN_VOX_L4_CLASS
loadbalance vip inservice
loadbalance policy CIN_VOX_LB_SIP_POLICY
loadbalance vip icmp-reply
interface vlan 20
description VIP_DMZ_VLAN
ip address 172.22.12.4 255.255.255.192
alias 172.22.12.3 255.255.255.192
peer ip address 172.22.12.5 255.255.255.192
access-group input PERMIT-ANY-LB
service-policy input GLOBAL_DMZ_POLICY
could you please help me on this...
thanks
Rakesh PatelI mean there should be one more statement-
class-map type sip loadbalance match-any CIN_VOX_LB_SIP_POLICY
match sip header Call_ID header-value sip:
and that will be called under-
policy-map multi-match GLOBAL_DMZ_POLICY
class CIN_VOX_SIP_L4_CLASS
loadbalance vip inservice
loadbalance policy CIN_VOX_LB_SIP_POLICY
loadbalance vip icmp-reply
is that missing in your config ? -
CSS arrowpoint cookie load balancing issue
Hi guys,
I need some advice on a load balancing issue.
We have connections hitting the CSS via a proxy environment. As a result i see only one source ip address. I want to use arrowpoint cookies for session stickeyness. However when i enable the rule the tcp session negotiation fails. The CSS sends a TCP/RST which terminates the session.
Here's the rule config:
content HTTP_rule
add service ZSTS299102
add service ZSTS281101
vip address <filtered>
add service LONS299102
add service LONS281101
balance weightedrr
change service ZSTS299102 weight 5
change service ZSTS281101 weight 5
advanced-balance arrowpoint-cookie
protocol tcp
port 80
url "/*"
active
Any help would be much appreciated.Remko,
in L3/L4 the CSS sends the SYN directly to the server.
So when the FIN comes in, we simply pass it to the server.
With L5 the CSS spoofs the connection and we select the server only after receiving the GET.
If there was some delay between the GET and the FIN, the CSS would have time to establish a connection with the server and the FIN could be simply forwarded.
Unfortunately, in this case the FIN is right after the GET with no delay.
Gilles. -
Load-balancing issues with iPlanet and multiple clusters
We're in performance test of a large-scale clustered deployment based on WLS 5.1sp10.
Due to scalability/functionality issues, some of which we've seen firsthand and
some of which we've been informed of by associates as well as BEA representatives,
we've chosen to implement multiple clusters with a maximum of three nodes each.
These clusters will be fronted by a web server tier consisting of iPlanet servers
using the proxy plugin.
Due to hardware constraints (both in test and in production), however, we've configured
the iPlanet servers to route across the multiple clusters. In our test environment,
for instance, we've got a single iPlanet server routing across two 3-node clusters,
and the configuration in obj.conf is as follows:
<Object name="application" ppath="*/application">
Service fn="wl-proxy" \
WebLogicCluster="clusterA_1:9990,clusterB_1:9991,clusterA_2:9990,clusterB_2:9991,clusterA_3:9990,
clusterB_3:9991" \
CookieName="ApplicationSession"
</Object>
Our issue is that the load-balancing doesn't appear to work across the clusters.
We're seeing one cluster get about 90% of the load, while the other receives
only 10%.
So, the question (finally!) is: Is this configuration correct (i.e., will it
work according to the logic of the proxy plugin), and is it appropriate for this
situation? Are there other alternative approaches that anyone can recommend?
Thanks in advance,
cramerI use weblogic6.1 with sp2+windows 2000.I develop a web application and deploy
it to cluster.Through HttpClusterServlets proxy of weblogic I found that a server
in cluster almost get 95% of requests but another only get 5% of requests.Why???
I don't set any special parameter.And the weight of the two clustered server is
equal.I use round-robin arithmetic.
Thanks!
"cramer" <[email protected]> wrote:
>
We're in performance test of a large-scale clustered deployment based
on WLS 5.1sp10.
Due to scalability/functionality issues, some of which we've seen firsthand
and
some of which we've been informed of by associates as well as BEA representatives,
we've chosen to implement multiple clusters with a maximum of three nodes
each.
These clusters will be fronted by a web server tier consisting of iPlanet
servers
using the proxy plugin.
Due to hardware constraints (both in test and in production), however,
we've configured
the iPlanet servers to route across the multiple clusters. In our test
environment,
for instance, we've got a single iPlanet server routing across two 3-node
clusters,
and the configuration in obj.conf is as follows:
<Object name="application" ppath="*/application">
Service fn="wl-proxy" \
WebLogicCluster="clusterA_1:9990,clusterB_1:9991,clusterA_2:9990,clusterB_2:9991,clusterA_3:9990,
clusterB_3:9991" \
CookieName="ApplicationSession"
</Object>
Our issue is that the load-balancing doesn't appear to work across the
clusters.
We're seeing one cluster get about 90% of the load, while the other
receives
only 10%.
So, the question (finally!) is: Is this configuration correct (i.e.,
will it
work according to the logic of the proxy plugin), and is it appropriate
for this
situation? Are there other alternative approaches that anyone can recommend?
Thanks in advance,
cramer -
Could not retrieve Enterprise Global Template - Load balancer issue
Hi,
We have 4 Project Server 2010 servers. The 4 web servers are load balanced by networking team with sticky session configured.
When we try to connect to the Project Server using MPP 2007 SP2, it fails saying 'Could not retrieve Enterprise Global template'. It works perfect when we point to a specific server by specifying the IP address for server name in the 'hosts'
file.
Earlier we observed some errors in the event viewer related to the SharePoint's internal load balancer for which restarted the 'Project Server Application' on each web server and it got fixed.
Now, the only entries that we see related to load balancer are as mentioned below as Information (not errors).
SharePoint Web Services Round Robin Service Load Balancer Event: Initialization
Process Name: w3wp
Process ID: 15080
AppDomain Name: /LM/W3SVC/539065287/ROOT-1-130462463500778047
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:ae7c7ee5c09b4e8198bdbb1ecb8c1c1b#authority=urn:uuid:9f626d347784423eb14bde4a1f4d13fc&authority=https://lonms12546:32844/Topology/topology.svc
Active Endpoints: 4
Failed Endpoints:0
Endpoint List:
http://lonxxx2532:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2545:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2546:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2566:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
Could the issue be due to network load balancer?
Could the issue be due to Sticky session configuration on the load balancer.?
How can we get to the root cause of the issue?
Which logging category should we set to 'Verbose' that can give us some hint.
Update: We tried to capture the requests through fiddler and observed that when fiddler is running on the client computer then the connection works perfectly fine even through the load balancer. Probably fiddler is reformatting the SOAP
envelop of the web service requests the way it should before sending the request to the server.
If we do not run fiddler and run some other similar tool (like Charles) then it again gives the issue and the request stucks at /PWA/_vti_bin/psi/winproj.asmx
We ran Wireshark on the servers and found the following for that web service call:
[TCP Previous segment not captured] Continuation or non-HTTP traffic.
Please let me know if someone could provide any hint what can be done next.
Regards, Amit GuptaThere are several ways to configure your load balancer. I would suggest that you work with the network engineer, the load balancer vendor and your project administrator to resolve this issue.
Basically you need URL to be resolved correctly. Also, I don't believe PS2007 did a good job handling load balancing, so you may need to bring someone in good with IIS and see they can tweek IIS to manage the cache better.
As I go back and look at your analysis, I think you should probably look at upgrading to Project Server 2013. They made some improvement in load balancing and the management of distributive cache.
I assume you have 4 WFE because you have thousands of project users. Roughly how many you have? Over 1000, over 5000
Have you tried to see if using two load balancing work? How about just one front end. I often see companies scaling SharePoint and Project server to extremes.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Cisco ACE20 Load balancing issues
Dear All,
I have a problem with the ACE 20 load balance
To start with following is our architectural request flow:
Load Balancer --> Webseal /(reverse proxy) --> HTTP Server --> Portal Server
We have Hardware Load Balancer Cisco ACE20.
When we access our portal from Webseal server it works totally fine without any issue, but when we access the same application using ACE we face the following issues:
1) Some of the links on do not work. For eg: We have a link "subscribe" which points to https://intranet/abc/wps/portal/subscription , whenever we click on this link, the request is directed to https://intranet/abc/wps/portal i.e homepage
2) URL redirection does not work We have some links which have a url forwarding or redirection for example when we open https://intranet/ef/quickplace it forwards the requests to https://intranet/ef/quickplace/Main.nsf?opendocument....., but this redirection fails and again the request is thrown to homepage i.e https://intranet/abc/wps/portal
3) The response of the request and the overall portal when accessed via ACE is very sluggish and it takes 20 seconds for homepage to load, whereas the homepage loads in 4 secs when accessed via webseal.
below is the ACE details. Kindly provide the your inputs to resolve this issue. will rate all the suggestions
Hardware Product Number: ACE20-MOD-K9
Card Index: 207
Hardware Rev: 2.3
Feature Bits: 0000 0002
Slot No. : 7
Type: ACE
Software
loader: Version 12.2[120]
system: Version A2(1.4) [build 3.0(0)A2(1.4) adbuild_11:54:12-2009/03/05_/a
uto/adbu-rel2/rel_a2_1_4_throttle/REL_3_0_0_A2_1_4]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_1_4.bin
installed license: ACE-SEC-LIC-K9Dear all,
Please suggest on this issue.
BS -
Hi,
I'm facing a problem with CSS while load balaning for the web application with two servers.
The application is based on activex..
Basically I have two servers running web application for which I have created VIP in the CSS, user hits the VIP address and they access the application, also we use the sticky thing as the application requires the session persistence.. everything is fine, but the problem starts when one of the server fails...
Assume a user hits the VIP address and access the application, due to the sticky thing his session will be with server A (for eg.), now suddenly the server A fails and in that time the user was doing a transcation and inputting some data and after that he press the submit button on the page, as the server A is down the web page gets refreshed and he has to relogin to the application and redo the whole thing what he was doing in that particular transcation...
Now the application guys are telling this problem should not happen as the CSS should be able to take care of the session getting reestablished to the other server B during the server A failure...
Can someone through some lights on this... I'm bit confused now... as what I understand is that the webpage gets refreshed during a server failure because the tcp session id will get changed and the server B will not accept the same tcp session so it reinitiates the new session...
Is my understanding right?? or is there something which we can do on the CSS to avoid this problem...
Regards
Vijay.Hi Gilles,
Thanks for the clarification.
I have two more issues too...
1. The load balancing of the application between the two servers are not even. Actually the traffic from the users keep hitting only one server, I understand the point of sticky method used in our case, but even atleast the connection from another client machine should go to the other server,but it is not the case... traffic from all the clients goes to only one server..
what could be the possible reason for the same...
My config is as below...
service SERVER-1
port 80
protocol tcp
keepalive port 80
keepalive type tcp
redundant-index 4
ip address 10.6.223.87
active
service SERVER-2
port 80
protocol tcp
keepalive port 80
keepalive type tcp
ip address 10.6.223.77
redundant-index 5
active
owner WEB
content WEB
add service SERVER-1
add service SERVER-2
redundant-index 104
vip address 10.6.223.78
protocol tcp
port 80
url "/webretrieve*"
advanced-balance sticky-srcip
active
2. Slow response of the application when users access application through VIP address(CSS), what can be done further in the configuration to improve the performance?? or any thing else I can do...
Regards -
Hello,
We are having a difficult time getting our app to work correctly on our load balanced system. Any help / suggestions would be greatly appreciated.
We have a very basic load balancer which is in round robin mode (this cannot be changed), two separate vms, each with an instance of apache(2.0.54) and tomcat(6.0.14). Each apache talks only to the tomcat on the same vm and the tomcats are configured to session replicate with each other (which is happening).
When I log in to the app and start pressing a few buttons there are no problems for a little while. I then leave the screen idle for 1 minute and resume pressing buttons. The main session bean which holds information about where the user is and other key information, gets its constructor called and is set back to default and the page goes back to the main menu. Immediately before the bean is reset, the logs show the following:
[MyApp] 17 Jun 2009 15:33:27,514 WARN: [ajp-8009-2 LoggerListener.onApplicationEvent(60)] : Authentication event AuthenticationSuccessEvent: v; details: (etc etc removed…)This is what the two logs look like:
VM1 - Authentication event
VM2 - Main menu
VM2 - Presss a button – progress a screen
VM2 - Presss a button – progress a screen
VM2 - Presss a button – progress a screen
VM2 - Presss a button – progress a screen
[wait 1 min]
VM1 - Authentication event
VM1 - Bean reset
Processing continues, but screen is redirected to main menu
We have the distributable tag in the web.xml file and javax.faces.STATE_SAVING_METHOD is set to client. Its set to client as the app will not work at all with it set to server (keeps asking for the user to re-log in).
Thank you,
VictoriaLooks like a Tomcat issue to me. JSF is not going to timeout in 1 minute. You might want to check your Tomcat replication settings. Note try to do a very simple loadbalancing application that just echos the Tomcat is executing on.
-
Load Balancing Issues SOMEBODY HELP ME!!
Good Morning.
A few days ago we implemented Load Balancing in our company, I printed a step by step procedure from MS and just follow it thinking that once I did that everything was going to be ok, but I am some issues that I managed to fix, but now I am stock in one
that I just can't figure it out, here I go.
When regular users try to connect to the Farm using the external IP they can't connect, we checked firewall seems to be ok, we check the configuration we did and we didn't miss any step, NOW here is the crazy part, when we use our Admin ID we can connect,
so I thought maybe is an Active Directory thing, but I don't know where to look or what to do so my questions are,
Can this be a licensing issue?
Do I have to have my TSBroker as part of my group of PC in the firewall?
Can it be a certificate issue? (not too sure because I can connect as an admin)
Can it be permissions to log in to the servers?
My co-worked is telling me now that if TS Broker sent them to TS1 they can connect but if TSBroker send them to the other two members of the farms they can't connect, TS1 is the original TS before this whole Load Balancing thing.
we tried so many solutions that we can find online and come up with and nothing seems to be working, so what do I do? What did I do wrong when I configure the Load balancing? is there any step beside what MS told me that I am missing...
PLEASE HELP!!
Thank you..Hi Rodrigo,
Thank you for posting in Windows Server Forum.
What’s your server OS in your environment?
Firstly see that, if you have not set up RD Licensing server and don’t have RDS CAL then your administrator can only get access for RDP connection (only 2 connection for Admin purpose). Now if you want more than 2 connection you need to setup RD Licensing server,
activate it, purchase RDS CAL and install it. After installing, you need to see that your user have enough permission to access RDS server and your user must be added under “Remote Desktop User” local group under RDS Server.
As you have commented that your admin can able to connect so I think you must have the issue with user permission, please go through above points and check the result.
Please check below article for more details.
1. TS Session Broker Load Balancing Step-by-Step Guide (Server 2008)
2. Checklist: Create a Load-Balanced RD Session Host Server Farm by Using RD Connection Broker (Server 2008 R2)
Hope it helps!
Thanks.
Dharmesh Solanki -
We have a situation in our project.
We have weblogic8 sp5 server having a MDB deployed which consumes messages from distributed queues created on WLS8. OSB business services post messages on these distributed destinations.
Set up:
Non production environements have 2 instances of wls8 servers and 2 instances of OSB(weblogic) servers.
Production environments have 4 instances of wls8 managed servers and 2 instances of OSB(weblogic) servers.
Weblogic 8 server has a custer created with only hostname comma seperated. e.g. host1,host2.
OSB(weblogic) server has cluster created with hostname and port comma seperated. e.g. host1:port,host2:port.
Scenario 1.
When wls8 cluster address is used in OSB business services, load balancing is not happening. Messages go on only one of the wls8 managed server. If this server goes down,then only messages goes on the other server. With this, we have got fail over and not load balancing.
Scenario 2.
When wls 8 managed server urls are used with comma seperated in OSB business service, some times load balancing happens. This is also not conclusive as when any of the wls8 managed server goes down and comes up, load balancing stops working and all the messages goes to one of the up servers.
Scenario 3.
On produciton environmet, we have 4 instances of wls8 managed servers and 2 instances of OSB(weblogic) managed servers.
As discussed in scenario1, when cluster address is used, load balancing does not happen and all the messages go to 1 of the 4 managed servers. When comma seperated urls are used, some times load balancing happenes but it is load balanced in 2 of the wls8 managed servers. Other 2 do not get any messages.
We have custom error handling done to catch all the errors occured when any exceptions occurs in proxy service or while invoking business service. Tried adding 4 different urls in end point uri of busness services. If any of the endpoint is down, it gives an error and message flow gets aborted. Tried with enabling retry count. With this, when any endpoint down, it raises an error which is collected in custom error collector and then tries with another available uri. With this, for any error and after successful message flow, an error is logged.
Any pointers on above points will be helpful to solve our loadbalncing issue.
Regards,
Pravin
Edited by: pravinkapile on Oct 11, 2009 10:03 PMPravin,
I doubt affinity to Server is somehow configured on the connection factory? Can you please check connection factory configuration?
Manoj
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/wlsmbeanref/core/index.html (JMSConnectionFactoryBean)
Overview
The load-balancing parameters allow client to choose how they wish to distribute the work to the configured servers.
Attributes
This section describes the following attributes:
* LoadBalancingEnabled
* ServerAffinityEnabled
LoadBalancingEnabled
Specifies whether non-anonymous producers created through a connection factory are load balanced within a distributed destination on a per-call basis.
If enabled, the associated message producers are load balanced on every send() or publish() .
If disabled, the associated message producers are load balanced on the first send() or publish().
Privileges Read/Write
Type boolean
Default Value true
ServerAffinityEnabled
Specifies whether a server instance that is load balancing consumers or producers across multiple members destinations of a distributed destination, will first attempt to load balance across any other physical destinations that are also running on the same server instance.
Privileges Read/Write
Type boolean
Default Value true
Edited by: mneelapu on Oct 12, 2009 11:16 AM -
the servers are loadbalancing between the switches '3'
and '2' and the link between the two switches is blocked.
This link was forwarding before and thus any traffic going to the server was
send to the Servers correctly no matter on which switch they are active.
However after addition of another link in between the switches 'root'
and '1', the path cost to the root has decreased and thus the link
between the '2' and '3' is Blocking and the other link between
the '2' and '1' is Forwarding as it should be ideally. But
this would be creating an issue because the trafic coming from outside i.e.
through switch '1' to the server will be correctly send to the
server if the server NIC is active on the '3' because the Virtual MAC
addresses are binded accordinlgy. In case the server falls onto the other
NIC which is on the '2' the traffic won't be able to pass because the
MAC address is not binded on the trunk connecting the switches '1'
and '2'. This binding cannot be done because the same MAC address is
being learned on the another trunk on the '1' which is connecting
to 'root'. So if we bind the same Virtual MAC on two trunks on the same
switch ('1') then this will cause MAC Address Flapping on the
switch and hence canot be done.
In another case,we can able to bind virtuak MAC on two trunks on the same
switch('1') and it's working fine.
The servers are load balancing in round robin fashion. each server has 2 NICs and work in Active-Passive mode. The servers load balance each other when all their active links are connected to '3' switch but when two of the active NICs of two servers are connected to '3' and the rest of the two active NICs from the other two servers are connected to '2' switch then only the forst 2 servers load balance and the other 2 servers do not load balance.
Please help.
Thanks in advance.In my experience, server load balancing is one of the most difficult things to get going properly in a switched LAN environment. Switched LANs are designed so that one MAC address can only be bound to one switch port. Therefore, if you have two NICs with the same MAC address (real or virtual), then you will get flapping somewhere.
I have seen various ways that the manufacturers try to get around this limitation of switched LANs. For example, one technique I have seen, practiced by ISA Server, is to use a multicast MAC address for the service so that frames go to both exit ports. But that does not always work well unless you tweak the network to acommodate it.
What sort of servers are they, and what system is used for the load balancing?
Kevin Dorrell
Luxembourg -
Hi,
I have ACE module and 2 servers the problem i am facing is only one server is been serviced by ACE the other server is not getting much traffic at all.
One server gets hit most of the time like 3 pkts goes to server 1 and 1 pkt goes to server 2.
Could anyone tell me why is this issue that unequal load balancing is occoring on my device.
Thanks in advance.here's the output of
sh serverfarm det
serverfarm : DNS, type: HOST
total rservers : 2
active rservers: 2
description : -
state : ACTIVE
predictor : ROUNDROBIN
failaction : -
back-inservice : 0
partial-threshold : 0
num times failover : 0
num times back inservice : 0
total conn-dropcount : 0
Probe(s) :
DNS_PROBE, type = DNS
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: DNS-118-1
10.0.0.1:0 8 OPERATIONAL 206 127901 1
max-conns : - , out-of-rotation count : -
min-conns : -
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
rserver: DNS-118-2
10.0.0.2:0 8 OPERATIONAL 230 212332 4
max-conns : - , out-of-rotation count : -
min-conns : -
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
here's the output of
sh service-policy L3L4_LOADB detail
Status : ACTIVE
Description: -----------------------------------------
Context Global Policy:
service-policy: L3L4_LOADB
class: CLASS_MAP
nat:
nat dynamic 1 vlan 118
curr conns : 325 , hit count : 340457
dropped conns : 5
client pkt count : 2697687 , client byte count: 179735431
server pkt count : 2694477 , server byte count: 535957631
conn-rate-limit : 0 , drop-count : 0
bandwidth-rate-limit : 0 , drop-count : 0
VIP Address: Protocol: Port:
10.0.0.3 tcp eq 53
10.0.0.3 udp eq 53
loadbalance:
L7 loadbalance policy: L7_LOADB
VIP Route Metric : 77
VIP Route Advertise : ENABLED-WHEN-ACTIVE
VIP ICMP Reply : ENABLED-WHEN-ACTIVE
VIP State: INSERVICE
curr conns : 325 , hit count : 340462
dropped conns : 5
client pkt count : 2697687 , client byte count: 179735431
server pkt count : 2694477 , server byte count: 535957631
conn-rate-limit : 0 , drop-count : 0
bandwidth-rate-limit : 0 , drop-count : 0
L7 Loadbalance policy : L7_LOADB
class/match : class-default
LB action: :
primary serverfarm: DNS
state: UP
backup serverfarm : -
hit count : 340457
dropped conns : 0 -
CSS 11501 Load Balancing Issue
Hi,
We are facing some issue in load balancing in cisco CSS 11501 as we are not able to access the application through virtual IP. Below is the ruuning configuration of the CSS:
CSS11501# sh running-config
!Generated on 10/06/2010 16:51:34
!Active version: sg0810106
configure
!*************************** GLOBAL ***************************
ip route 0.0.0.0 0.0.0.0 132.186.199.1 1
!************************** CIRCUIT **************************
circuit VLAN1
ip address 132.186.199.145 255.255.255.0
!************************** SERVICE **************************
service Server1
ip address 132.186.199.243
port 5001
protocol tcp
keepalive port 5001
active
service Server2
ip address 132.186.199.246
protocol tcp
port 5001
keepalive port 5001
active
!*************************** OWNER ***************************
owner L5_Owner
content L3_Rule
vip address 132.186.199.146
protocol tcp
port 5001
add service Server1
add service Server2
active
content L5_Rule
vip address 132.186.199.146
add service Server1
add service Server2
protocol tcp
port 5001
url "//132.186.199.146:5001/emi"
active
CSS11501#
Observation : We are able to telnet on VIP: 132.186.199.146 on port 5001, but not able to access the application.
In Actual scenarion customer access application by accessing URL: http://132.186.199.243:5001/emi and once he enter this URL in web browser the request redirects ( by server itself) to URL: https://132.186.199.44:6002/cas/login?service=http%3A%2F%2F132.186.199.243%3A5001%2Femi%2Findex.jsp&acceptStrength=BASIC on backend server for user authenticaton and once user is authenticated then it again redirect to main URL ( http://132.186.199.243:5001/emi ) to access the application but when we are trying to access the application through VIP ( URL: http://132.186.199.146:5001/emi) we are not getting the login page as the request is not gettting redirected to backend server for user authentication.
Please suggest a solution here.The problem is that you are in one-armed mode.
So you need to configure client nat.
Without nating the client ip address, the server response goes back directly to the client and bypasses the CSS.
Therefore the client receives a response from an unknown server ip address (not the vip).
So configure a group.
For example
group Client
vip address 132.186.199.146
add destination service Server1
add destination service Server2
active
Also, remove the url command from your content rule.
It is useless in your case and will just make performance worst.
Gilles. -
BI Load Balancing issue after support pack up grade
Hi BI Basis Gurus,
Before Upgrade :
System Info: SAP_BW -700 0014 SAPKW70014 SAP NetWeaver BI 7.0
Self Load from DSO to DSO & DSO to InfoProvider: Always use to kick 15 to 17 TRFCs
Application Servers: 3
Load balancing : accross the 3 was good.
Data load time: around 1.5hrs per 13million records
After Upgrade :
System Info: SAP_BW -700 0019 SAPKW70019 SAP NetWeaver BI 7.0
Self Load from DSO to DSO & DSO to InfoProvider: Now it is kicking only 2 TRFCs
Application Servers: 3
Load balancing : accross the 3 was poor.
Data load time: around 3.5hrs per 13million records
We validated / modified all the settings in the following TCODEs:
SMQS , SM59, RZ12, SBIW & SPRO
Still the system is not able to kick off more TRFCs .
The servers has 30 max conn. Please let us know if anybody has any suggestion as of today we had discussed with 4-5 basis guys & have no result till now.
Thanks
Edited by: umesh manoor on Aug 27, 2009 10:12 PMWe checked the required TCODEs:
1. RSODSO_SETTINGS
the parallel process for activation : 6
But this is not causing any issue as the activation time is same before & after sp upgrade.
2. RZ12
Logon Group Instance
Default Ins1
Default Ins2
Default Ins3
Please let us know if you have any suggestion.
Thanks
Maybe you are looking for
-
Palm TX - Desktop DateBook Empty & Now it seems it will not sync with device.
Hello Palm Forum Members, I have Windows 7 and I sync my Palm TX to DeskTop 6.2.2 via bluetooth. Two weeks ago I loaded my DeskTop DateBook and it was blank. I have made several attempts to sync my device to the desktop in hopes to recover my dateb
-
Mail problem with long titles using utl_smtp / mixed content / attachements
Hello, I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...). For the body i got it working. And the title works fine too, untill the encoding passes a certain length, then goes
-
After using the loop to re-record, all vocal gone ?
Hi there, Something terrible happen to me. I was recording a vocal of my friend singing. After, we play back, he requested for one short section to be re-recorded as he was choking. So, I click on the loop button on the bottom, I define the loop area
-
I have a new Mac Air and I want to download my Photoshop along with my other programs that I use through Creative cloud account that I pay for monthly. Valerie Bolden
-
Applying Password-protection for Numbers files?
It looks great -- at first view. I grabbed my standard Excel file with all my misc. stuff in it, and hit the first snag. It was password-protected, so Numbers wasn't going to let me import it. Okay, that makes sense. So I figure out how to unprotect