Load balancing with 526 controller

Good Day,
I would appreciate confirmation of this configuration or, if it is wrong, suggestions.
I have been asked to provide wireless access for a conference of about 150 in an auditorium about 50m x 20m. The attendees will be using their access just to browse, check e-mail etc. We have a radius authentication system in place that is available.
From what I have gathered, it appears that if I get a 526 controller and 4 521 access points I can advertise one SSID and configure the access points/controller for load balancing to maintain decent speed fot the users.
Is this correct?
Also, is there a benefit to getting better equipment. Price is not really a factor but this setup will be used only a couple of times a year and I don't want to throw money away. But it has to work, and I'm on a short deadline...procurement, configuration and testing by 6/4/07.
Thanks

The Cisco 526 Wireless Express Mobility Controller can be used with up to six access points per controller. So 5 -6 access point would be a better option . Refer URL
http://www.cisco.com/en/US/products/ps7320/products_data_sheet0900aecd8060c22b.html

Similar Messages

CF 10 Load-Balancing with Remote Instances

I was reading an article on Clustering/LB/HA using CF8, but have not found any updates for CF10.
Using VM VirtualBox to setup a few virtual servers, I am looking to setup a load balancing of ColdFusion 10 on 2 remote instances. The goal would be have ColdFusion Cluster Manager be able to point http request to one of the two servers based on load/availability. Not really having a hardware cluster/failover setup, just managing resources on two CF instances instead of a standalone.
The servers are Windows Server 2008 R2 with IIS7.5 and ColdFusion 10 Enterprise on installed on 3 of these machines. Let's call them CF-LBManager, CF-Web1, and CF-Web 2. In the CF Docs, they show the Cluster Manager adding the local CF instance and "if you want" a remote instance. However, this scenario would require the main instance to be running and not fail for it to direct to the other instance.
I am trying to set this up now with CF-LBManager as just a manager of the requests coming in. In the Enterprise Manager >> Instance Manager, the local instance is shown and I add the two remote instances with the correct Remote Port, JVM Route, etc. I also made sure the <Cluster>...</Cluster> block was added to the two remote instances (CF-Web1 and CF-Web2) \runtime\conf\server.xml file too, Jetty Services also is running. Now under the Enterprise Manager >> Cluster Manager I add the two remote instances to the cluster, not the local instance on CF-LBManager with Multicast Port and Sticky Sessions enabled. On Submit, I get a green message "You must restart all the server instances and any configured webservers for these changes to take effect.". I go ahead and reboot the servers and come back.
I now browse to the ColdFusion page as a test on CF-Web1 and CF-Web2 to make sure CF is running properly, they do. I then browse the IP of the CF-LBManager, however it only returns the local IIS web site and not redirect to one of the two cluster members. I am not seeing any message on the coldfusion-out.log on the remote instances. Am I not setting this up correctly or not enabling the Cluster Manager to take over and pass along the requests to those in the cluster?

Unfortunatley I don't have a lot of experience with CF10 on Windows, but if you are running CF behind IIS I think you will need to update the Tomcat connector configuraiton to do load balancing. I'm not sure if re-running the wsconfig tool on all of the servers will do this or not, but that is what I would suggest trying first. If that doesn't work you will need to update the Tomcat connector configuraiton manually. You can find more information on load balancing with the Tomcat connector here: http://tomcat.apache.org/connectors-doc/generic_howto/loadbalancers.html.

CSS Load Balancing with Cookies

We are trying to load balance 2 backend servers hosted on Websphere with advance balance cookies method.
Restrictions
ServerA is unable to accept cookies generated from ServerB.
ServerA and ServerB are generating random cookies
Unable to modify cookie string with a constant.
How can we load balance based on cookies considering the above restrictions?
We have attempted to do hash based load balancing with cookies but the problem we run into is the servers do not accept cookies generated from another server.
The configuration we tried is written below:
service ServerA
ip address 192.168.10.2
keepalive type tcp
keepalive port 80
active
service ServerB
ip address 192.168.20.2
keepalive type tcp
keepalive port 80
active
content ABC
url "/*"
add service ServerA
string prefix "JSESSIONID="
advanced-balance cookies
port 80
add service ServerB
string skip-length 5
string process-length 16
string operation hash-xor
protocol tcp
vip address 172.16.32.1
active
Can we change the string prefix to JSESSION instead of JSESSIONID= ?
The only place the app guys can add a constant string to match on is before the = sign.
Is it possible for CSS to match on a constant string before = sign e.g below:
service ServerA
ip address 192.168.10.2
keepalive type tcp
keepalive port 80
string id567=
active
service ServerB
ip address 192.168.20.2
keepalive type tcp
keepalive port 80
string id123=
active
content ABC
url "/*"
add service ServerA
string prefix "JSESSION"
advanced-balance cookies
port 80
add service ServerB
string skip-length 0
string process-length 6
protocol tcp
vip address 172.16.32.1
active

It should work.
There is no reason for it not to work...
This is the best method you can have on the CSS for stickyness.
Get a sniffer trace on the client and server with arrowpoint cookie configured on the CSS and capture a failure so we can see what is going on.
also send me the config so I can verify everything is ok.
If you have a service request open with the TAC, you can also give the SR # so I can review what has been done.
Gilles.

Cache and Load Balancing with Oracle APEX Listener

Hi,
I intend to use only HTTP access.
How to implement a Cache and Load Balancing with the Oracle APEX Listener?
Is it possible to do with the the standalone running APEX Listener?
Thanks by advance for any tips/documentation/references.
Kind Regards.

Hi,
I think this question is best asked in the APEX Listener forum:
ORDS, SODA & JSON in the Database
Kind regards
Sandro

Load balancing with JSP

Anyone and everyone,
When configuring load balancing with Weblogic clusters, does load
balancing take effect for all services or just EJB and RMI? Or another
way of saying the same thing, can I setup weighted load balancing for
the JSP engines across 2 weblogic servers.
Thanks in advance,
Mike

The load-balancing documentation you read describing the different algorithms only applies to RMI stubs (e.g., EJB clients). Please see http://www.weblogic.com/docs51/cluster/concepts.html#1026091 for a description of how load-balancing/clustering works with servlets/JSPs.
The short answer is that in using servlet clustering, most people want/need/use in-memory replication for HttpSession objects. In WLS 5.1 (and before), in-memory replication requires one or more proxy servers be set-up in front of the cluster. Typically, most people use something like BigIP to load-balance
across the proxy servers and let the weblogic plug-in for the proxy server handle the routing to the cluster. The plug-in uses round-robin until an HttpSession is established for a user, then it always tries to route to the server where the user's session is located.
Hope this helps,
Robert
Brian Lin wrote:
All,
I have a quesiton here regarding load balancing with DNS round robin. As of Chapter Adminstration of Clustering Weblogic server, Weblogic can be configured to balance by weight. How about Weblogic handle weight based balancing after DNS round robin ip response? or just can choose one way instead of both?
What's the big difference between choosing BigIP and software balancing (WL)?
Brian
"Wei Guan" <[email protected]> wrote:
I don't think you can configure this load balancing in weblogic in current
release. However, if you have Big-IP or LocalDireoctr, you can set up
weighted load-balancing there. Otherwise, weblogic proxy will use DNS round
robin to do the load-balancing between JSP engins.
My 2 cents.
Cheers - Wei
Michael Yakimisky <[email protected]> wrote in message
news:[email protected]...
Anyone and everyone,
When configuring load balancing with Weblogic clusters, does load
balancing take effect for all services or just EJB and RMI? Or another
way of saying the same thing, can I setup weighted load balancing for
the JSP engines across 2 weblogic servers.
Thanks in advance,
Mike

Multihomed eBGP load balancing with 3 ISP's

We currently peer with 2 ISPs using BGP in an active/failover configuration. My company wants to move to a 3 ISP model where Internet traffic is split across the 3 providers so that bandwidth is equally distributed on outgoing traffic across our 2 /22 ARIN IP ranges. This is from our 2 edge switches that have VSS.
Within my limited knowledge of BGP, I have determined that we could do load sharing pretty easily by adding multiple default routes and breaking up our /22's into /24 and advertising them that way. However, I don't think this satisfies the request that downtime must be seamless, should one link drop.
Currently, our ISP's advertise default routes. From the research that I've done, we could get close to load balanced links if we receive full BGP routes and community settings and definitions. I'm nervous about this because it looks really complicated, and I don't want our AS to turn into a transit AS. I've been told the same can be accomplished with only partial BGP routes and community settings and definitions.
Personally, I think we just need a WAN load balancer. However, given the request, is there a thread out there that can explain this, or can someone discuss this requested scenario a little bit?
Thanks!

Hi there
First question would be what is the required reconvergence time for the applications using the Internet? Should an outage occur, when do they lose their state? Once you know that, you then have a target to aim for in terms of recovery
With regards load-balancing, with BGP we are always talking inbound and outbound.
The outbound solution is relatively simple - each ISP advertises a default route to your Internet edge router(s). Create an eBGP session from each edge router to the core, advertise the default route and redistribute into the IGP. Ensure the IGP cost to each BGP next hop is equal and you have ECMP for outbound routing.
Inbound influence is usually via MED (not likely in this case given 3 ISPs), adjusting local-pref in the ISP via BGP EXT communities configured your end, or via AS-PATH prepending for longer prefixes from your /22. Prepending would be simplest, but your unlikely to get an exact inbound traffic split, however a relatively even distribution should be sufficient.

Load Balancing with BigIP / SSL question

I have an oddball question. We're load balancing ColdFusion
MX7 across 3 servers using a BigIP load balancing server. We
decided to go the hardware approach and it has been great except
for one small configuration issue.
We use a mix of SSL and non SSL pages, prior to the switch
from a single server to a load balanced setup I used to script that
would determine if a page that was supposed to be SSL had the
variable CGI.HTTPS turned on or off. If it was off, the page would
redirect back to itself with the SSL turned on.
The problem we have is that we followed BigIP's instruction
to secure the load balancing hardware instead of the three servers
running behind it. So what happens is that the traffic goes to the
load balancer port 441, but then the calls from the load balancer
to the individual servers is port 80. So even if a page is called
as HTTPS://... the coldfusion server says that CGI.HTTPS is "off"
since the traffic is port 80.
This isn't much of a problem, our SSL pages are linked as
HTTPS:// and the only problem would actually arise if someone was
to type in the URL and call it as HTTP rather than HTTPS.
My questions is this, does anyone know of a way that I can
detect if the page should be HTTPS and is not without changing our
configuration and putting SSL certificates on each individual
server?

Hey,
Well the load balancing with the BigIP device is really very
amazing. I think
what i liked most was swapping out servers when their lease
was up, through the
BigIP manager I just stopped all traffic to a server, shut it
down, plugged in
the new one and turned traffic back on. It was really very
easy.
The SSL stuff still gives me a headache to think about. but
I should mention I
no longer work where I was, plus now I'm all .net C# but
that's a different
story.
I think if I was going to do this all again I would not have
secured the bigIP
unit. It was nice to buy one SSL cert for all the servers I
attached rather
than one per server, but getting the SSL sites to work
properly was a headache.
We also use windows file replication where now I would go
with like a pair of
Dell MD1000's mirrored for storage and just have tons of ram
and cpu on the
front end units. Depends what you want to spend I guess. I
think the bigIP unit
we bought was like 20 grand, i think they are cheaper now
though.
Hope I helped.

How does load-balancing with WebCache work - is there still a bottleneck?

Hello,
We're migrating an old Forms 6i app to 10.1.2.0.2 (apps servers = Redhat Linux), and are starting to consider using WebCache to loadbalance between two application servers.
My question is this - say we have apps servers A and B, both running Forms and Reports Services. We use Webcache on server A (don't have the luxury of a third apps server...) to load balance between A and B. So all initial requests come into A, which in some cases may then be diverted to start a new Forms session on B.
For those users whose middle-tier sessions are now running on B - will all network traffic for their Forms session continue to be routed through Webcache on A, then to B, over the course of the session? Or does Webcache somehow shunt the whole connection to be straight between the client PC and server B, for the duration of that Forms session?
If the former, does that mean that the server hosting Webcache can still be a significant bottleneck for network traffic? Have people found load-balancing with Webcache to be useful..?
Thanks in advance,
James

Hi gudnyc,
Thanks for posting on Adobe forums.
For HDPI you do not have to do any It will adjust automatically.
http://helpx.adobe.com/photoshop-elements/using/whats-new.html
Regards,
Sandeep

Load Balancing With Round Robin

Hi,
I have two iAS instances, each on their own box, and one iWS instance
running on a third box. I have setup the web connector to use round
robin and added the server weights. I believe that is all that is to it
to do simple load balancing with iAS. The problem is is that the
requests only go to one iAS instance. The server weights are 1 and 1.
Am I missing something here?
Thanks

Could be lots of things.
The most common misconfiguration is testing an application that is deployed "local". This application option effectively disables load balancing.
Another common mistake is to either not update the configuration of the webconnector (if the webconnector
has a seperate configuration LDAP) or to not restart
the webconnector after the configuration change.
Hope this helps. There's more things we could try, but I'll hope its one of these two easy things.

Load balancing with use of router 881.

Hello,
I have two MPLS line and i want load balancing with the help of CISCO router 881. is it necessary that i require two router on both location.? if one location have firewall and one location have cisco router 881 then can i do a load balancing or i require two router each on both location ? What are the basic requirement that i need.
Thanks,
Kuntal

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
An 881 should be able to load share across multiple ports. Many routing protocol support ECMP, including BGP, but you need "special" hidden/secret commands to enable. EIGRP also supports unequal cost load sharing.
If an 881 supports OER or PfR, those too will do unequal load sharing, dynamically.

Load balancing with A-Gate

Hi All,
I wish to configure my single W-Gate (Linux) to load balance with 2 A-Gate (Window). Can anyone help?
Regards
Lauran

Hello Lauran,
I'm assuming that you already have the ITS working with one AGate server. To load balance between two you need to install the ITS AGate again on the second server with the same ITS instance name. Then on the WGate server you will need to modify the ItsRegistryWgate.xml. Under the <key name="Instances"> you will find a section already for this ITS instance name, like ITS1. You will need to copy and paste the Agate1 section and make it Agate2, change the Host name and the PortAGate and PortMManager and then save and restart. The finished section should look like:
- <key name="ITS1">
- <key name="Values">
<value name="Available" type="text">yes</value>
<value name="Name" type="text">ITS1</value>
<value name="DocumentRoot" type="text">c:\its1081</value>
<value name="ServerName" type="text">Apache2 (virtual host: default:1081)</value>
<value name="NIReceiveRetryCount" type="text">0</value>
<value name="NIReceiveTimeout" type="text">0</value>
<value name="NISendTimeout" type="text">0</value>
</key>
- <key name="Agates">
- <key name="Agate1">
<value name="Host" type="text">Hostname1</value>
<value name="PortAGate" type="text">sapavw00_ITS1</value>
<value name="PortMManager" type="text">sapavwmm_ITS1</value>
<value name="Type" type="text">1</value>
<value name="SncNameAGate" type="text" />
<value name="SncNameWGate" type="text" />
<value name="MultiProcess" type="text">no</value>
<value name="Available" type="text">yes</value>
</key>
- <key name="Agate2">
<value name="Host" type="text">Hostname2</value>
<value name="PortAGate" type="text">sapavw00_ITS1</value>
<value name="PortMManager" type="text">sapavwmm_ITS1</value>
<value name="Type" type="text">1</value>
<value name="SncNameAGate" type="text" />
<value name="SncNameWGate" type="text" />
<value name="MultiProcess" type="text">no</value>
<value name="Available" type="text">yes</value>
</key>
</key>

ACE 4710 and load balancing with sticky cookie

Configuring load balancing with SSL termination and stickiness for a couple of citrix xenapp servers. I'm doing a source-NAT as the ACE resides in the DMZ and these particular servers reside on the inside arm of the firewall. The ACE is in bridged mode to load balance web servers that reside in the DMZ. Everything seems to work just fine, but the cookie stickiness does not seem to be working.

Hi David,
As you may know, using Wireshark to look at an HTTPS capture is only useful if you've installed the server SSL key.This is why I find it easier to use something like LiveHTTPHeaders or HTTPWatch.
When using cookie-insert, the ACE will not create any dynamic cookie entries. It will simply create one static entry for each rserver with a cookie value, such as R3911631338, and any client that gets load balanced to that rserver will receive a cookie with that value. So what you see there is what is expected.
You are correct in that when using location cookies that the server supplies, the ACE will create a dynamic entry when it sees the server response with the cookie. The cookie is included in the server's response, and the ACE will look for the value as configured. The cookie will also be sent to the client. If the cookie is not in the server's first response, you will need enable persistence-rebalance so that it will look in subsequent server responses. If the browser opens new connections with that cookie, then the ACE will stick to the same server.
My suggestion would be to get sticky working with cookie-insert first. Then if that meets your needs, go with that permanently. If you need to use server cookies, then once cookie insert is working, migrate your sticky to cookie location.
Sean

T3 Load Balancing with Weblogic Server 6.1

We are using rwo weblogic 6.1 servers A and B behind a load balancer with a DNS name (eg. www.loadbalancer.com). We are using T3 for Java client to application server communication. The client creates the Initial context with the load balancer url,creates remote objects using the context, closes the initial context and then tries to get a new initial Context. What we noticed is even though the client closes the first context and gets a new one, the client is always hooked on to only one server making load balancing ineffective. Is there a T3 configuration to release the connection when we close the context ? The documentation says only one T3 is established per client JVM.

Rick,
You may want to look at the Alteon and F5 configuration we have on edocs.
Take a look at the following URLs for a possible solution
http://edocs.bea.com/wls/docs61/cluster/alteon.html#591902
http://edocs.bea.com/wls/docs61/cluster/bigip.html#591902
Chuck Nelson
DRE
BEA Technical Support

Load-Balancing with Coherence BackingMapListener, CacheStore etc?

Hi -
I am looking for advice on load-balancing across a cluster.
Currently we insert objects into a Coherence cluster. Each storage node also runs a CEP instance. BackingMapListeners detect Coherence insert events, and inject the rows into the local CEP instance. The first channel in the CEP has a large buffer to allow the BML to return quickly without blocking.
The CEP makes decisions about the events and emits these decisions as further events, which are merged back into the original data rows in Coherence (i.e. the primary data is updated with enrichments).
This works fine until I saturate the CEP with a very high message rate, faster than the CEP and downstream components can keep up with. At this point the buffer between the BackingMapListener and the CEP starts to fill up. Once it is full, the BackingMapListener blocks, waiting for the CEP to take an event from the front of the queue before it can insert the latest event to the back of the queue.
Once the BackingMapListener blocks, other updates to the cache are blocked - which means the downstream end of the CEP is deadlocked by the upstream end, which is waiting for the downstream end... Events move through at exactly one per minute, due to a timeout in the Coherence cache update.
I recognise that I could (and probably should) copy the primary data into a separate cache as I merge the updates into it, to break this deadlock. But I wondered if anyone has used other mechanisms for load-balancing using Coherence partitioning, apart from the BackingMapListener.
I looked at CacheStore, which seems tailor-made for this as it includes queuing and doesn't block other cache actions (although if it blocks for too long the guardian will kill it). The problem I have with CacheStore is that I can't distinguish between inserts (CEP event injection required) and updates (no CEP event required).
I tried using BinaryEntryStore, where I can test BinaryEntry.getOriginalBinaryValue() for nulll to distinguish between inserts and updates, but I can't wire this into the cache using the Spring XML schema.
Are there any other established patterns for this apart from breaking up the inserts and updates into separate caches?
-thanks, Barney

The Cisco 526 Wireless Express Mobility Controller can be used with up to six access points per controller. So 5 -6 access point would be a better option . Refer URL
http://www.cisco.com/en/US/products/ps7320/products_data_sheet0900aecd8060c22b.html

ASA 5520 VPN load balancing with Active/Standby failover on 2 devices only...

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
This topic has been beat to death, but I did not see a real answer. Here is configuration:
1) 2 x ASA 5520, running 8.2
2) Both ASA are in same outside and inside interface broadcast domains – common Ethernet on interfaces
3) Both ASA are running single context but are active/standby failovers of each other. There are no more ASA’s in the equation. Just these 2. NOTE: this is not a Active/Active failover configuration. This is simply a 1-context active/standby configuration.
4) I want to share VPN load among two devices and retain active/standby failover functionality. Can I use VPN load balancing feature?
This sounds trivial, but I cannot find a clear answer (without testing this); and many people are confusing the issue. Here are some examples of confusion. These do not apply to my scenario.
Active/Active failover is understood to mean only two ASA running multi-contexts. Context 1 is active on ASA1 Context 2 is active on ASA2. They are sharing failover information. Active/Active does not mean two independently configured ASA devices, which do not share failover communication, but do VPN load balancing. It is clear that this latter scenario will work and that both ASA are active, but they are not in the Active/Active configuration definition. Some people are calling VPN load balancing on two unique ASA’s “active/active”, but it is not
The other confusing thing I have seen is that VPN config guide for VPN load balancing mentions configuring separate IP address pools on the VPN devices, so that clients on ASA1 do not have IP address overlap with clients on ASA2. When you configure ip address pool on active ASA1, this gets replicated to standby ASA2. In other words, you cannot have two unique IP address pools on a ASA Active/Standby cluster. I guess I could draw addresses from external DHCP server, and then do some kind of routing. Perhaps this will work?
In any case, any experts out there that can answer question? TIA!

Wow, some good info posted here (both questions and some answers). I'm in a similar situation with a couple of vpn load-balanced pairs... my goal was to get active-standby failover up and running in each pair- then I ran into this thread and saw the first post about the unique IP addr pools (and obviously we can't have unique pools in an active-standby failover rig where the complete config is replicated). So it would seem that these two features are indeed mutually exclusive. Real nice initial post to call this out.
Now I'm wondering if the ASA could actually handle a single addr pool in an active-standby fo rig- *if* the code supported the exchange of addr pool status between the fo members (so they each would know what addrs have been farmed out from this single pool)? Can I get some feedback from folks on this? If this is viable, then I suppose we could submit a feature request to Cisco... not that this would necessarily be supported anytime soon, but it might be worth a try. And I'm also assuming we might need a vip on the inside int as well (not just on the outside), to properly flip the traffic on both sides if the failover occurs (note we're not currently doing this).
Finally, if a member fails in a std load-balanced vpn pair (w/o fo disabled), the remaining member must take over traffic hitting the vip addr (full time)... can someone tell me how this works? And when this pair is working normally (with both members up), do the two systems coordinate who owns the vip at any time to load-balance the traffic? Is this basically how their load-balancing scheme works?
Anyway, pretty cool thread... would really appreciate it if folks could give some feedback on some of the above.
Thanks much,
Mike

Load balancing with 526 controller

Similar Messages

Maybe you are looking for