'Load Paper' error message even when paper is loaded in the front load tray

Load Paper Error message -
Printer type: HP OfficeJet 6500 Wireless All-in-One Printer
(possibly other HP printers as well)
This 'How-To' article will help you solve a 'Load Paper' error message even though there is paper in the front load tray. You can read this helpful article at http://mikeyates.com/wordpress/?cat=187
This could also help other HP printers with no easy access to the drop down type rollers located inside the printer.
Would appreciate any feedback if this worked for you or not.
Thanks
Mike

This is what I found: printer eventually wants to see color ink after running months without.  Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean.  Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point.  Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error.  Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure.  (which you can get aroung by keep hitting OK and cancelling the alignment)!  This totally cured by problem of load paper and alignment failure.  Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

Similar Messages

  • Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
    Clearly state the Troubleshooting Steps you have tried to Resolve it

  • When I try to update Elements 9, I get an error message even though it appears to download the update completely. Why?

    When I try to update Elements 9 I get an error message despite the fact that the update seems to download completely. Why?

    Windows 7. Thanks, but why then do I get a downloading frame that seems
    to indicate that it IS updating?
    Mila and Bill
    On 2014-12-12 14:44, Barbara B. wrote:
    WHEN I TRY TO UPDATE ELEMENTS 9, I GET AN ERROR MESSAGE EVEN THOUGH IT APPEARS TO DOWNLOAD THE UPDATE COMPLETELY. WHY?
    created by Barbara B.  in Photoshop Elements - View the full discussion

  • HT1665 I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

    I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

    See this support article: http://support.apple.com/kb/TS3221

  • I can't access this one website, when I get page load error message, even when my cookies/cache are cleared?

    For the past couple of days, I'm not able to access this one website: http://www.eboards4all.com/364378/. In the past, I've been able to access it fine, even on Safari, up until last Wednesday. Then I've been getting the page load error message on Firefox or page not loading message on Safari. I've asked others who use our forum via email about it--they're able to get to it fine. I believe, this all started, when I downgraded Firefox on my OS X, last week, by accident, and had to go to a lower 3. My Imac is 6 years old and I don't have money for the latest versions or the new one to come out last week.

    If you think it might be your Firefox version, you might be able to run 3.5.19. Certainly that would be more secure than 3.0.11.
    ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.5.19/mac/en-US/
    I recommend backing up your Firefox settings first in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)

  • I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?

    Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing

    Hey there Mambo822,
    It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
      iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • HT2638 This is not working for me, it brings me back to the same error message and when I click on it the screen disapears, any help

    need help

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • "Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

    “Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
    The error behaviour is quite irregular and does not occur for specific condition.
    Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
    (http://support.microsoft.com/kb/2152148)
    The current version of SQL Server I am using is as below:
    Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)   Jun 17 2011 00:54:03   Copyright (c) Microsoft Corporation  Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    Thanks in advance for the help!

    Hi Mon,
    The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
    Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
    using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    Regards,
    Charlie Liao
    TechNet Community Support

  • I got an error message 13050 when trying to download the reader 10.1.3

    I GOT AN ERROR MESSAGE 13050 WHEN I TRIED TO DOWNLOAD THE READER 10.1.3. CAN ANYBODY HELP?

    What is your operating system & version?
    Was there any other information beside that 13050 error?

  • TS3212 Error message 2324 when drying to download new version of itunes

    I just got an iPhone 4S and need to update iTunes. I get an error message 2324 when I try to download the newest version. Has anyone else had this problem and if so, how did you fix it?

    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • Get error message "this "**" file cannot be attached until the files already attached are finished uploading" even when attaching 1 file

    I attached multiples .pdf files to an email. Tried to attach the next file before the previous 1 finished attaching. Got error message "this "**" file cannot be attached until the files already attached are finished uploading". Was never able to attach that 1 file to the email that I received the error message for; was able to attach subsequent files to that same email & send it. Now, I often get the same error message, even if I only attach 1 file & esp. when attaching .ai or .jpeg files. What can I do to fix this problem?

    It looks like nobody has an answer for this despite of the 80 something views!
    And here i thought Adobe admin would be monitoring the forum, but surprisingly, they don't even have the answer for this!!!

  • When trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected

    Hi
    when trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected
    thanks

    Hi there ramerr,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W. 

  • Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

    Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • HT201412 getting error message 1202 when loading iheart radio

    getting error message 1202 when trying to access iheart radio

    some folks with vista have found a work around by right clicking on 'redeem' and selecting 'copy'. Then go to internet explorer and paste and hit enter. You may now be able to redeem your cards this way.
    This issue appears to be a certificate issue with the system. Unfortunately windows does not have a link to install these root certificates from the website for vista like you can XP, so you cannot reinstall them if something gets corrupted.
    You may have to redeem on another computer or email itunes through expresslane.apple.com with the codes from the gift cards and explain the situation. they may be able to redeem them to your account for you.
    The last alternative would be to get a Mac.

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

Maybe you are looking for

  • Step in with a NavigationConnector

    Hello, the recommended way to add a Navigation from other sources is to implement a NavigationConnector, explained in: http://help.sap.com/saphelp_nw04s/helpdata/en/42/f784be16671bf0e10000000a11466f/frameset.htm There are two questions I could not fi

  • Sound Distortion - Music and Events only

    My iphone 3gs 3.1.2 seems to have a software issue playing sounds. when playing music from the speaker or using the headphone jack the sound is incredibly distorted and unrecognisable, even with the volume low. i have done several soft and hard reset

  • How can I have Firefox 4.0 and a 64 bit version of Minefield installed and make them use separate profile folders?-thanks

    I have been using Minefield, the beta version of Firefox 4 , in a 64 bit version. Since the final Firefox 4.0 doesn't seem to have a 64 bit version, I want to keep Minefield, but still would like to try Firefox 4.0. FF4 uses after installation automa

  • Get popup in Batch session

    report ZPRG        no standard page heading line-size 255. include bdcrecx1. DATA : BEGIN OF GT_COUNT OCCURS 0,         DOC_NUM TYPE IKPF-IBLNR,         FI_YR TYPE IKPF-GJAHR,         CNT_DATE TYPE IIKPF-ZLDAT,         PER_VAR TYPE IIKPF-ABWEI,      

  • Query interval on db

    My customer would like to use a SQL DTS to collect information from ICM HDS db and they would like to know if they use less than 10 minutes of interval and if it could cause any impact on ICM processes and performance. The tables queried are t_Route_