Loader shows error when loading cs4 movies which uses matrix 3d class

I am trying to load an swf which is made using cs4 and which uses the classes "flash.geom.Matrix3d" and "flash.text.engine", but when i load it it shows error and the swf is not getting loaded. i am getting the following error.
ReferenceError: Error #1065: Variable flash.geom::Matrix3D is not defined.
at prova_fla::MainTimeline()
VerifyError: Error #1014: Class flash.text.engine::ContentElement could not be found.
at global$init()
at visup.utils::AdvancedText()
at prova_fla::MainTimeline/frame1()
The issue happens only when i try to load the swf using the loader. Opening the loading swf seperatly does not have any issues. I am using flex builder 3 and using Actionscript 3.
Thanks in advance.

are you publishing for flash 10?

Similar Messages

TS3623 when i play a rented the movie it comes out the follow notice loading AN ERROR OCCURRED LOADING THIS CONTENT. TRY AGAIN LATER

I have rent couple movies which I cannot play, when i play the movies it come out the follow notice
loading
AN ERROR OCCURRED LOADING THIS CONTENT.
TRY AGAIN LATER
someone knows why is this happening ? how can I get my money back?

How did this get resolved?

Error when loading the callback component

Hi friends
Am getting this error. Error when loading the callback component. Am working in Travel expense workflow which is 2 level based on condition. If its EG > 8 its one level and EG < 8 its 2 level. When the approver does the approval am changing the status from 3 to 4 at that time the pernr is getting locked. Next step itself mail step. But the workflow is throwing the error and mail its hanging in the mail step. I have try to restart the workflow but its not restarting. Error when loading the callback component this error is showing in the lock pernr. Am not locking the pernr system locks the pernr by itslef and not unlocking the pernr. How to solve this issue.
Regards
vijay

Hello,
Check if OSS Note 854495 is applicable.
regards
Rick Bakker
Hanabi Technology

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Error when loading data in Infopackage

Hi Friends,
I'm getting the following error when loading please help it is quite urgent.
Value 'ZSATX #1 ' (hex. '436F6E7461696E6572202331 ') of characteristic ZSIGNI contains invalid characte BRAIN
Thnaks ,

Hi Smily,
It refers to an invalid char found in this InfoObject value. Does your system have anything maintained in RSKC?
For good info you can refer to Eugene's blogs:
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Hope this helps...

Error when loading lower case

Hi Friends,
I getting an error when loading the Infopackage ,
"Value 'sss ' (hex. '737373 ') of characteristic Zapple contains invalid characters"
I used the formula "To upper" in my T/R still I was getting the same error" and also I edited the value in PSA to "SSS" and loaded and still pointing to the same error. when I do a find for "sss" I dont see any value in PSA.
Please advice, it will be really appreciated,
thanks alot in advance

Hi,
U cont see the special characters in display mode in PSA...
for that First the check the reason for error,
it is from PSA, and the status in the monitor turned to red with errors or collection eneded with source system.. then go to manage of data target delete the red request... now go to PSA in modelling then select ur infosource right click select the option edit PSA data..
Now u can see the some special characteristics in the record that error occured... once it is complete then save come back to PSA screen then once again right click on the Infosource select immeadiate update.. it will work fine..
Siddhu

JAVAMAP-Sax Parser ...............Linkage error when loading the class.

Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
Srinivasa

Dear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace();

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

403 error when loading WAP

I am getting a 403 error when loading WAP from the site https://localhost:30091.
It was working and suddenly stopped. How do I troubleshoot this issue ?

Hi,
Do you use any proxy on the WAP server? If yes, please disable the proxy and try again.
Also, please check if there is any warning or error in the event viewer of the WAP server.
We can check the event of Azure Pack at Applications and Services Logs-->Microsoft-->WindowsAzurePack
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

TS3623 Apple TV just shows "Error occurred loading this content, please try again later"

Apple TV just shows "Error occurred loading this content, please try again later"

Welcome to the Apple Community.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

Caller 09 is missing error when loading

Hi,
I'm getting the above error when loading transaction data from source system. (connected to Oracle system with DBLink so the source system is Myself). This system has just been upgraded to 3.5 but I had similar issue in Dev prior to the upgrade so I don't think its upgrade related.
Full error message is that the datasource must be replicated. Timestamp in source system and timestamp in BW are different.
I've tried the following (several times).
1. Replicated datasource (by right clicking on source system underneath infosource), then used program RS_TRANSTRU_ACTIVATE_ALL to activate the transfer structures.
2. Replicated datasource then manually activated transfer structure, communication structure, regenerated underlying programs of transfer structure and PSA program.
3. I've already logged off and back on
4. I've gone into RSA5, and reactivated the extract structure.
In the infosource, if I display its status, its has last changed timestamp of today. But in the error message I'm getting a timestamp of 25.05.06 for source system and 25.1.2003 for BW (bearing in mind they are both in fact BW).
Any ideas? Please help !!
Thanks
Sue

Hi,
Re: Errors when uploading ODS to infocube
1. Activate transfer rules that belongs to the data source
2. Activate the ODS
3. Activate the update rules (infosource to ODS)
4. Activate the update rules (ODS to infocube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
Shreya

HT1657 It keeps showing error in downloading rented movie what can i do?

It keeps showing error in downloading rented movie what can i do?

Are you getting an error message number with your error? If so, what is the number?

Loader shows error when loading cs4 movies which uses matrix 3d class

Similar Messages

Maybe you are looking for