Loading data from flat file into 0EMPLOYEE

Dear,
I want to see the <b>'monthly change of numbers of employees'</b> of my company in a BW report.
i want to do this by loading data from a dummy flat file into 0EMPLOYEE and afterwards into cube 0PAPA_C02.
i've searched the whole 'help and service sap' websites but nowhere, i could find a usefull user guide.
Could you explain me how this job needs to be done, are there certain steps that need to be taken?
here are a few of my questions:
1: what fields and data do i have to fill in my flat file?
2: how does the time-dependency of master data of employee work?
3: why do you only have to map 0calday and 0employee from infosource 0HR_PA_PA_1 to the corresponding fields of cube 0PAPA_C02?
4: how is the key figure 0HDCNT_VC filled automathically?
(the activation of cube 0PAPA_C02 and its flow is already done.)
or maybe you know a user guide which explains the whole picture and could you send me its link?
thanks a lot in advance,
Julie de Meyer

Hi,
Employee is master data : You need to extarct data every month.Once the extraction is done , you need rto activate to see the results. Otherwise it will display old result.
You can extract data for 0HR_PA_0 and 0HR_PA_1 cubes also. After that you can do the reporting based on this.
You can try some sap standard BI reports .
Headcount is calculated based on employement percentage which is maintained in infotype 0007 (Planned Working Time). If it is 100 then it is considerd as headcount 1.
you can check .
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Regards
Nilesh

Similar Messages

Loading data from flat file...

Hello,
I am actually experiencing a problem where I cant load data from a flat file into a table. I have actually reverse engineered the flat file into ODI. But the thing is I don't know how to load the data that is reversed into a RDBMS table. Added, I don't know how create this RDBMS table form within ODI to be reflected on the DB. Added, don't know how to load the data from the flat file onto this table without having to add the columns in order to map between the flat file and the table.
In conclusion, I need to know how to create an RDBMS table from within ODI on the database. And how to automatically map the flat file to the DB table and load the data into the DB table.
Regards,
Hossam

Hi Hossam,
We can used ODI procedure to create table in the DB.
Make sure you keep the column name in the table name same as the column name in FLAT FILE so that it can automatically map the column.
and regarding Loading data from FLAT File i.e. our source table is FLAT FILE till ODI 10.1.3.4 we need to manually insert the datastore since the file system cannot be reversed.
Please let me know Hossam if i can assis you further.
Thanks and Regards,
Andy

Loading data from flat file to ODS

Hi Experts,
I have a developed a report, in which Flat file is the datasource and data target as DSO.
Here I have one requriment to Increatment the counter value in TVARVC table after every load compleate.
Can this be done thru Process chain? I belive this can be done thru process chain by creating variable.
If this can be done thru Process chains can any experts send me sample examples code.
Thanks In Advance.
Sreedhar.M

Hi sridhar,
     We have a similar scenario in which we will load data from flat file to datasource the file name (x_20081010.dat) of such format being fetched from the low value of the TVARVC table ... once successfully executed we had program to increment the value of low which increments by one day adn the next day the file with that will be placed in the application server...
    U can create a abap program varaint and attribute for that and u can achieve that.... this is sample code which searches for the string and after some coding i.e once ur file has been loaded successful code u can write similar code to increment or counter values which u are asking for...
search s_tvarvc-low for '20'.
        if sy-subrc ne 0.
          sy-msgty = 'E'.
          sy-msgid = 'ZWM1'.
          sy-msgno = '000'.
          sy-msgv1 = 'Unable to find DATE to increment'.
          raise unable_increment.
        else.
          w_date = s_tvarvc-low+sy-fdpos(08).
          w_nextdate = w_date + 1.
          replace w_date with w_nextdate into s_tvarvc-low.
          modify tvarvc from s_tvarvc.
        endif.
Regards
vamsi

Loading data from flat file to table

Hi,
I am using OWB 10g R2. I have to develop a map which loads data from flat file to table.
1. I have created a .csv file.
2. Import that into OWB by Module Wizard.
3. I have created one external table, which use the .csv file.
After that what I have to do for successfully loading the data into table.
Regards,
Sanjoy

Hi Sanjoy
You can building a mapping to move the data from somewhere to somewhere else. More specifically;
1. create a mapping
2. add external table to mapping
3. add table to mapping for target (it can be unbound)
4. map from external table ingroup to target table ingroup (all columns will be mapped)
5. if target table was unbound right click on target table and click create and bind
This is a basic mapping you can have for this scenario. There is a post here which does something like this, but it will create a File to Table mapping which will use SQLLoader.
http://blogs.oracle.com/warehousebuilder/2009/01/expert_useful_scripts_from_simple_primitives.html
Cheers
David

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

Load data from XML files into BI

Hi All,
Can any one guide me through the steps which involve in loading data from XML files into BI?
Thanks
Santosh

Hi James,
I have followed upto step No: 12 .
Please could you let me know how to link the XML file on my local drive to BI,
I am not able to find figure out where to specify the path of the XML file to be loaded into BI.
Thanks In Advance
Regards,
San
1. Create a Infosource(ZIS), with transfer structure in accordance with the structure in the XML file. (You can open the XML file with MS Excel.This way you can get to know the structure).
2. Activate the transfer rules.
3. After activation ;from the Menu Bar , Select Extras>Create BW Datasource with SOAP connection.
4.Now Activate the Infosurce again, this creates an XML based Datasource(6AXXX...)
5.These steps would create two sub nodes under the Infosource(ZIS).
6.Select Myself system and create a data package and execute it run in Init mode(without Data Transfer).
7. This would create an entry in RSA7(BW delta Queue)
8. Again create another Delta Infopackage under it, and run it. Now the Datasource(6AXXXXXX..) would turn green in RSA7.
9.In Function builder(SE37) select your FM( do a search ,F4, on the datasource 6AXXX....) .
10.Inside this RFC based FM , from the Menu Bar select Utilities>more Utilities>Create Web services>From Function module.
11.A wizard will guide you through the next steps .
12.once this is done a Web serrvice would be enabled in WSADMIN. Select your FM and execute it.
13.From here you can upload the data from XML file into BW delta queue.
Edited by: Santosh on Nov 30, 2008 2:22 PM

Loading data from .csv file into Oracle Table

Hi,
I have a requirement where I need to populate data from .csv file into oracle table.
Is there any mechanism so that i can follow the same?
Any help will be fruitful.
Thanks and regards

You can use Sql Loader or External tables for your requirement
Missed Karthick's post ...alredy there :)
Edited by: Rajneesh Kumar on Dec 4, 2008 10:54 AM

Error in loading data from flat file....

Hi,
While loading the data from flat file , only one column is getting populated in the ODS and after that the sixth column is getting populated with the null values. Also when I save the changes in CSV file .. its not getting saved.
Could you please tell me what could be the probable reason for this.
Also what are the points we should keep in mind while loading from flat files.
Regards,
Jeetu

Hi,
You need to take care of -
1. you flat file structure ( left to right columns) should match with the datasource ( top to down) column to column. if you don't wish to laod some column, leave it as blank column in flat file.
2. your file should not be open when loading data
3. make sure your transfer rules & update rules are defined properly.
4. do the simulation in infopakage first & that will give you fair idea.
5. to start with load data first in PSA Only, check & then take it forward.
hope it helps
regards
Vikash

Problem in loading data from flat file to info object

Hi experts,
I am new on bw. I am trying to load data from .csv file to info object. CSV file contains two colums Mat No, Mat Name and are separated by comma and similarly Mat Name is attribute of Mat No in info object. I am doing all steps by following the book but whenever I load data into info object it is loaded in one column. I mean both Mat no and Mat name apears in Mat No column whereas Mat Name column appears empty in info object. I have changed exel file into .csv. Any one can help me sort it out.
regards

Hi,
your flatfile should be in the form of csv ie it does not mean that in a word u seperate it with coma
create an excel file and say save as in teh file name give the name of your flatfile and in the save as type select CSV(comma delimited) from the drop down list
and then in this file enter the data as u fill in excel sheet.
After closing the file right click it and say open with wordpad then the data should appear seperated with a comma.
Try this and then revert back in case of any doubts.........
Are u loading data into BI 7.0 or 3.x
Regards
Madhavi

Error while loading data from flat file to Oracle DB

I am new to ODI. I am trying to load data from a flat file to Oracle DB using the LKM File to Oracle (External Table) and using the IKM Oracle Incremental Update. I am getting the following exception during the "Create External Table" stage:
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:561)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx1.f$0(<string>:50)
at org.python.pycode._pyx1.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
... 1 more
Caused by: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Could anyone please provide any pointers.
Thanks,
Srini.

The code that is executed is as follows:
createTblCmd = r"""
create table ODITEMP.C$_0PARTNER
C1_C1 NUMBER(14),
C2_C2 VARCHAR2(12),
C3_C3 VARCHAR2(18),
C4_C4 NUMBER(7),
C5_C5 TIMESTAMP(11)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY dat_dir
ACCESS PARAMETERS
RECORDS DELIMITED BY 0x'0D0A'
CHARACTERSET 'WE8ISO8859P1'
STRING SIZES ARE IN CHARACTERS
BADFILE 'partners.txt_%a.bad'
LOGFILE 'partners.txt_%a.log'
DISCARDFILE 'partners.txt_%a.dsc'
SKIP 0
FIELDS
MISSING FIELD VALUES ARE NULL
C1_C1 POSITION(1:14) ,
C2_C2 POSITION(15:26) ,
C3_C3 POSITION(27:44) ,
C4_C4 POSITION(45:51) ,
C5_C5 POSITION(52:62)
LOCATION ('partners.txt')
PARALLEL
REJECT LIMIT UNLIMITED
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit()

Loading data from flat file to infocube

hi,can any one give me the steps invovled in loading data from flatfile to info cube in an elegant way

hi,
data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..and activate it.. ->now comes to Datasource tab> create one Datasource here you need to select type of data for example..
select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab -->
and load preview data Activate it..
now select your datasource and create info package and schedule it..
now your data will loded in to PSA level...----> and now comes to info provider select your cube.. and right clcik it..
and create transformations.,. and activate it..----> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data TargetNow if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation.
Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
if helpful provide points
regards
harikrishna N

Upload data from flat file into internal table

Hi friends,
I want to upload the data from a flat file into internal table , but the problem is that all the columns in that flat file are seperated by "|" character instead of tabs.
Plz help me out.........

HEllo,
DO like this.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X' " Check here
* HEADER_LENGTH = '1'
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_COJRNL
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
VAsanth

ODI error while loading data from Flat File to oracle

Hi Gurus,
I am getting following error while loading flat file to oracle table :
ava.lang.NumberFormatException: 554020
     at java.math.BigInteger.parseInt(Unknown Source)
     at java.math.BigInteger.<init>(Unknown Source)
     at java.math.BigDecimal.<init>(Unknown Source)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
The connections between source and target is fine.
Kindly suggest on this error.
Thanks
Shridhar

Hi John,
The source is csv file. By default all columns are string type.The integration is failing at step 3 ( load Data).
I am loading the data from csv file directly to staging table( oracle ).Its one to one mapping.
Shridhar

Load data from flat file to target table with scheduling in loader

Hi All,
I have requirement as follows.
I need to load the data to the target table on every Saturday. My source file consists of dataof several sates.For every week i have to load one particular state data to target table.
If first week I loaded AP data, then second week on Saturday karnatak, etc.
can u plz provide code also how can i schedule the data load with every saturday with different state column values automatically.
Thanks & Regards,
Sekhar

The best solution would be:
get the flat file to the Database server
define an External Table pointing to that flat file
insert into destination table(s) as select * from external_table
Loading only single state data each Saturday might mean troubles, but assuming there are valid reasons to do so, you could:
create a job with a p_state parameter executing insert into destination table(s) as select * from external_table where state = p_state
create a Scheduler chain where each member runs on next Saturday executing the same job with a different p_stateparameter
Managing Tables
Oracle Scheduler Concepts
Regards
Etbin

Loading data from text file into ListBox

I have data in a text file that I want to load into a
listbox... I have fully mastered handling strings and arrays so I'm
going to need some help...
I was wondering how do I get flash to load a text file that
contains the data below.. and display it line for line like I want
it to list down the component
"Launch;7.1.7.6"
"Engine;7.1.7.6"
"OSX;7.0.0.2" (or something close to that)
and I was wondering how do i just get it to take it fromt he
file.. line for line from where it says exeversion in the file and
list it in the listbox...
I'm really thankful to anybody that helps.
Data in text file:
quote:
exeversion=Launch;7.1.7.6;
exeversion=Engine;7.1.7.6;
exeversion=LinuxX86;7.0.0.2;
exeversion=LinuxPPC;7.0.0.2;
exeversion=LinuxMIPS;7.0.0.2;
exeversion=OSX;7.0.0.2;
exeversion=Config;7.1.7.6;
exeversion=UI;7.1.7.7;
exeversion=JAVA;7.0.4.5;

nobody cna help me? i really need to know or have a tutorial
or something so i can learn from it... i really appreciate anyone
who helps

Loading data from flat file into 0EMPLOYEE

Similar Messages

Maybe you are looking for