Loading data to Headcount and Personnel Actions infocube (0PA_C01) from r/3

Hi Gurus,
I'm loading data from R/3 into my infocube 0PA_C01. I'm loading the data from 2 infosources 0HR_PA_0 (DS is 0HR_PA_0) and 0HR_PA_1. The infosource 0HR_PA_1 has inturn 3 datssources 0EMPLOYEE_ATTR, 0PERSON_ATTR and 0HR_PA_1. So on the whole I have 4 data sources and so 4 infopackages.
Now the problem is that if I load an employee from r/3, the data is getting loaded into the cube in 4 lines, one per each info package. But I want to see all the employee details in one line. Any ideas on how to load the data into one line ??
Regards,
Ramesh

why are u loading master data in the cube.
Load the master data seperately and what ever attributes of master data you want make that as master data attributes when you load the transaction data using 0HR_PA_0 and 0HR_PA_1.
Also, there could be 4 records in the master data that the reson you are getting 4 records depeding about the time dependent infoobject.
You can check that in 0Employee and 0Person what all attributes are time dependented according to that you are getting records.
As becuase of Begda and Endda the records changes in R/3 so even you will have that set of record in BW when you fetch that data .
Hope this help.

Similar Messages

HR Headcount and Personnel Actions(0PA_C01) std routines not working

Hi Friends,
I have loaded data for Headcount and Personnel Actions(0PA_C01) cube. Here the fields below mentioned are not populating data which are with standard routines. I checked code and also gone through sdn and also with SAP notes but every thing ok.
We are working with support package 16.
0AGE,
0AGE_RANGE,
0GT_PLAND(country key),
0COUNTRY_CODE,
0GENDER,
0NATION,
0PERSLANGU,
0POSTAL_CD(Postalcode),
0REGION,
0MAST_CCTR,
0CNTRCTTYPE(Contract Type),
0PAYPCT_CHA(Capacity Utilization level in %),
0HDCNT_FTE(Head Count FTE).
Can u please give me your views to populate data to the above mentioned fields.
Here 0GENDER,0NATION,0PERSLANGU,0POSTAL_CD(Postalcode),0REGION are attribute of 0PERSON and in turn is an attribute of 0EMPLOYEE. I can able to see data individually from both 0PERSON and 0EMPLOYEE. but i want to see data attribute data of 0PERSON in 0EMPLOYEE.
Is it possible? If possible Can you please Explain me?
Regards,
Sridhar

Adjusted transfer rules, so now standard routines are correctly populating fields.
I have doubt on two fields of cube,
keyfigures: capacity utilization level
head count FTE which is (capacity utilization level / 100)
Is capacity utilization level field in BI is equivalent to R/3 Staffing Percentage field ?
(The staffing percentage indicates which percentage of an employee's time is to be spent in the position entered). If not what field in R/3 is equivalent to capacity utilization level .
Regards,
Sridhar

Is there any documentation on 0PA_MP01 (Headcount and Personnel Actions)

Have not been able to find documentation on multiprovider 0PA_MP01 and its related queries, any idea where to find?
Cheers.
Tan Meng Mau.

Well....the note just states that it is a new multiprovider but with no details. What we are looking for is something similar to the documentation for the BI Content that SAP provides.
E.g.
http://help.sap.com/saphelp_nw70/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Tan Meng Mau

How to load data to dimensions and fact table is it simialr to sql server

How to load data to dimensions and fact table in a data ware house environment, is it simialr to sql server, oracle?
Never migrated or loaded data to datawarehouse server.
I have an interview and am really confused if they ask anything related to the dataware house side elements.
Coudl you please if you don't mind provide me some steps and dimension and fact table info, an example only.
Atleast for my knowledge.
Thank you very much for the helpful info.

Some discussions in previous forums should help you
http://forums.sdn.sap.com/thread.jspa?threadID=2019448
http://forums.sdn.sap.com/thread.jspa?threadID=1908902
In the SAP tutorial, you can see a sample example of making fact tables.
http://help.sap.com/businessobject/product_guides/boexir32SP1/en/xi321_ds_tutorial_en.pdf
Arun

MSS and Personnel Action

Hi Experts,
What is the relationship between MSS and Personnel Action (PA40)? Can a manager that have access to mss perform personnel action (eg Organizational Transfer) for his/her subordinate employees? Thanks

Yes as indicated above use processes and forms which are standard delivered and mimic the pa40
you can create your own forms just like actiions
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2e/5a5d45d9f24fbdb06be2ff53651c3e/frameset.htm

EG,ESG and personnel actions for multiple comapny

Dear All,
we are implementing SAP HCM for 2 countries (dubai and Pakistan both are same country grouping =99) in dubai they have 4 companies(4.Personnel Area's)with 4 company code. and in Pakistan ,they have 3 company's( Personnel Area's)
My question is. each company's in Pakistan have different EG and ESG and also each company have different Personnel Actions,( some actions are not applicable to other PA for an example.. Transfer action is not applicable to other PA in pakistan company
How can i create diferent Employee gorup and employee sub group for each comapny (i mean for each personnel Area?
pls help me
Manjula

Hi,
ARU is correct. The Personnel Areas are part of the Enterprise Structure and define an organization by location, product line, function, etc. Employee Group/Subgroup are in the Personnel Structure and define the types of employees - hourly, salaried, sales, director, vice president, full time, part time, etc. The Employee Groups/Subgroups, however, are country specific and in table T503Z can be assigned to one or more countries. Thus, you could have certain Employee Group/Subgroups valid for Dubai and certain ones for Pakistan, but not between Personnel Areas if in the same country.
Also as responded to above, you can control the actions by User Group and have actions called the same have different infotypes or not appear at all based on the User Group assignment of the processor.
Paul

Cannot load Java plug-in and access R12 Oracle form from client

Hi, one of my user cannot open Oracle form when accessing R12 environment using IE6. After selecting responsibility and menu, it got stuck after 50% processing when trying to load Java applet. It never got completed even after waiting for 2-3 hours.
Is there any browser setting that needs to be modified? I checked popup blocker and activeX setting. All seem to be in order. Kindly assist. Thanks.

Hi,
What is the difference between this client and other clients?
Delete the browser cache/history files and check then. If this does not help, enable trace for JRE (as per Note: 549423.1 - How to enable tracing and logging for Sun JRE (Native Plug-in)) and see if it shows any errors when you encounter this issue.
Regards,
Hussein

Trouble maintaining original "date taken" info and metadata when exporting TIFFs from original CR2 files.

When exporting TIFFs (from original RAW), I noticed my metadata said the "date created" was the day of export. I want to be able to access the date the original image was taken as opposed to the day I exported it. Is there a way to maintain original date of image taken in my info? I couldn't seem to find it after I exported my TIFFs...

I just tested this with LR 5.5 Mac OS 10.9.3 and it works correctly for me.
To troubleshoot your problem:
1. Which version of LR and which platform (Mac, Windows)?
2. Which tool or command are you using to examine Date Created of the exported TIFF?
3. Upload a sample TIFF showing the problem to Dropbox or similar and post the URL here. This will allow us to take a look in detail.

I have a new ipod nano and I am trying to load music to it and cannot find my music from my itunes that was on my Mac

I have a new ipod nano - im trying to find my old iTunes music as I had an iPod touch about 8 months ago and cannot find my iTunes music and it is not on my current computer that was connected to old iPod touch

Your music will only be where you put it.
It has always been very basic to always maintain a backup copy of your computer. Everything should be there.

Infosources without Datasource in R/3 (HR Infocube - 0PA_C01)

Hi!
I have activated the cube Headcount and Personnel Actions (0PA_C01). In this infocube I have 3 Infosources:
Age in Years - 0AGE (Hierarchy)
Country Key - 0COUNTRY (Hierarchy)
Capacity Utilization Level in % - 0PAYPCT_CHA (Hierarchy)
I cant find their Datasource for these Infosources in R/3. In their documentation that I got from SAP Help, told me that these Infosources need a CVS File. Is there another way to do it, without using a CVS file using anther Datasource?
Thanks a lot!
Regards
Vic

Hi Vic,
There is no standard datasources for uploading hierarchies on the mentioned characterstic.
Uploading from the CSV is the only option we have.
I think , you have seen the below link earlier !
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/06a83a79db712fe10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Data Loading issues in PSA and Infocube

Hi team,
i am loading data into PSA and from there into info cube via a DTP,
when i load data into PSA all 6000 records are transfered to PSA and process is completed sucessfully,
When i execute the DTP to load data into info cube the data load process is completed sucessfully but when i observe
the "manage" tab i see
"Transferred 6000 || Added Records 50"
i am not able to get as why only 50 records are loaded into infocube and if some records are rejected where can i find them and the reason for that,
kindly assist me in understanding this issue,
Regards
bs

hi,
The records would have got aggregated based on common values.
if in source u had
custname xnumber kf1
R                56             100
R                53             200
S                54              200
after aggregation u will have
custname                kf1
R                            300
S                           200
if u do not have xnumber in your cube.
Hope it is clear now.
Regards,
Rathy

Load data from infocube to DP planning area

Hi All,
I have loaded the data from info cube to DP planning area keyfigures with the transaction /SAPAPO/TSCUBE.
the data copy was successful and there were no error messages. However, the keyfigure values in planning book are shown exactly as double the values of infocube key figures for all the periods.
I repeatedly loaded data several times and the behaviour was same.
We didn't implement any BADI in standrad /SAPAPO/TSCUBE program.
Could any one please give some hints what would be the reasons for this problem.
Thanks
Krish

I am not sure on how you check the Live Cache data for DP but based on your testing I can say that the old data is not overwritten by the new data in the Live cache. I cannot say the root cause for this however I can suggest you the remedy. To avoid this issue, you zero out the values of the key figure before loading from the Cube.
For this you have to run a macro which copies zero for the entire horizon and then load the cube. First test this in test system, if it works (it should work), then to make it simple create a batch job with two steps, first step would run this macro and the second step will load the data from cube. you can run this job whenever you want to load the data

Cluster Maintenance Data_OM_Infotypes,Personnel Actions.

Hi Seniors,
I want to check the data for OM Transfer requests which are been trasfered to QA
I mean Maintain Infotypes-View Cluster MAintenance Data- T778T,T777T &
MainTain Personnel Actions- View Cluster MAintenance Data- T778M, T777M.
i have check the following path to check the infotype & the Personnel Actions in SPRO>>Personnel Management > Organization management >Basic setting >> but therse is no setting as such.
And thses are the settings which has been transfered to QA ,what are the Impleication these setting going to have in QA once they are vailable in QA>>>Om Setting ,i mean when i create the OM Stracture In OM through-PP01.
Please guide me on the same.Thanks.
Edited by: srssaphr09 on Feb 22, 2011 10:36 AM

Hi Seniors anyupdates...
Waiting for your valuable inputs.

Loading data from Info cube to PA

Hi All,
I am trying to load the CVC from Infocube to Planning Area in Development environment.
I am getting error message for mismatch of periodicity of infocube and Planning Area.
how to resolve this. Where do we define the periodicty of infocube ? I don't think so ?
Please help me
Thanks a lot
Prabhat Sahay

Prabhat,
I understand that you already have the data in the infocube and want to load it into the planning area.
However it is important to ensure that the data in the cube and the planning area have the same periodicity failing which we will run into such issues.
So pls go back to the step of defining the infocube.
In RSA1 if you double click on the infocube name which you are using as source, you can see the details in the right. In that, look for the dimensions section, under that look for the time section. If that contains a calweek or a calmonth and you are using a fiscal variant, this issue occurs.
You have to drop your infocube data, redefine the cube to use FISCAL PERIOD and FISCAL VARNT instead of calweek or calmonth and then load the data back again. You need to ensure you populate the fields FISCAL PERIOD and FISCAL VARNT. You might want to do that with routines in your update rules or your infosource communication structure. REmember to activate the entire structure from cube to data source.
Once you load the data into the cube with the new setting, and then try to copy the data into planning area, it will be successful.
To answer your other question. Yes Time Characteristics is necessary for loading data between cube and planning area.
Hope this helps.
Thanks
Mani Suresh

Not able to load data in tables with correct way

Hi
i made one trigger to load data in view and tables.
CODE FOR TRIGGER>>>>
Object Details Code Errors SQL
CREATE OR REPLACE TRIGGER "WELL_GENERATOR_TRIGGER_1"
INSTEAD OF INSERT ON VIEW_WELL_GENERATOR_FORM
FOR EACH ROW
DECLARE
rowcnt number;
BEGIN
INSERT INTO facility (FAC_PK) VALUES (:NEW.FAC_PK);
SELECT COUNT(*) INTO rowcnt FROM WELL WHERE WEL_PK = :NEW.WEL_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL (WEL_PK,SITE,FAC_FK) VALUES(:NEW.WEL_PK,:NEW.SITE,:NEW.FAC_PK);
ELSE
UPDATE WELL SET WELL.SITE = :NEW.SITE,
WELL.FAC_FK = :NEW.FAC_PK
WHERE WELL.WEL_PK = :NEW.WEL_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM WELL_STATUS WHERE WELL_STATUS.STA_PK = :NEW.STA_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL_STATUS (WELL_TYPE, WELL_TYPE_DATE, OPER_STATUS, CLASS,WEL_FK)
VALUES(:NEW.WELL_TYPE, :NEW.WELL_TYPE_DATE, :NEW.OPER_STATUS, :NEW.CLASS,:NEW.WEL_PK);
ELSE
UPDATE WELL_STATUS SET WELL_STATUS.WELL_TYPE = :NEW.WELL_TYPE,
WELL_STATUS.WELL_TYPE_DATE = :NEW.WELL_TYPE_DATE,
WELL_STATUS.OPER_STATUS = :NEW.OPER_STATUS,
WELL_STATUS.CLASS = :NEW.CLASS,
WELL_STATUS.WEL_FK = :NEW.WEL_PK
WHERE STA_PK = :NEW.STA_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM PERMIT WHERE PERMIT.PER_PK = :NEW.PER_PK;
IF rowcnt = 0 THEN
INSERT INTO PERMIT (AUT_STATUS,WEL_FK) VALUES (:NEW.AUT_STATUS,:NEW.WEL_PK);
ELSE
UPDATE PERMIT SET PERMIT.AUT_STATUS = :NEW.AUT_STATUS,
PERMIT.WEL_FK = :NEW.WEL_PK
WHERE PERMIT.PER_PK = :NEW.PER_PK;
END IF;Now But still i am not getting result which i want.Like in WELL_STATUS table i could nt able to insert the value (WEL_FK) from (WEL_PK).And In PERMIT table column (WEL_FK) still i could nt able to insert the value (WEL_PK).
Now WEL_PK value autogenerate from the SEQ same with STA_PK and PER_PK.But instead of taking value from seq STA_PK take the value from WEL_PK (dnt know why ? But in data its shows me Same value WEL_PK and STA_PK).Same thing With PER_PK.
so where i am wrong ? i really need your help.
workspace:PRACTISE
UN:[email protected]
PW:testing
Application: 39289 - TESTTING
Thanks
Edited by: vijaya45 on Jul 13, 2009 9:44 PM
Edited by: vijaya45 on Jul 14, 2009 12:48 AM

Hello vijaya45,
Not sure if this will help, but I noticed you currently have a WELL_GENERATOR_TRIGGER_1 and a WELL_GENERATOR_TRIGGER_2, and "1" is disabled but "2" is enabled. Which one is supposed to be running at this point?
John

Loading data to Headcount and Personnel Actions infocube (0PA_C01) from r/3

Similar Messages

Maybe you are looking for