Loading Date in Sales Order

Hi
Could any one help to advice on the "Loading Date" derivation in sales order item detail (shipping view) in detail including customization settings.
In addition;
-- I have a part sufficent stock
-- Loading date is say 11-02-2009, but delivery is happen 13-02-2009 (delayed).
What could be the rootcauses.
Please show me a complete light on this issue
Thanks so much for support
Regards
RG

hI RG
Delivery date is the date on which goods reached the customer.
Loading date is the date on which Picking/packing  & Transportation planning must have been completed to the start the loading only.
On Goods issue date Loading is completed and it leaves for the customer on this date to reach the customer on the Delivery date.
In your case loading date is 11/02/2009 and Delivery date is 13/02/2009.
That means loading time + Transit time = 2days, therefore system is giving delivery date as 13/02/2009.
Edited by: pradyumna on Feb 13, 2009 10:25 AM

Similar Messages

  • Mass change of LOADING DATE on Sales orders

    Hi
    Does anyone know how we can MASS CHANGE  the LOADING DATES on SALES ORDERS with MANY LINE ITEMS  - ALL WITH Different DELIVERY DATES
    So basically we are wanting to over-ride the loading dates which SAP suggests - which relates to the ROUTE
    I am aware that you can use EDIT > Fast change > delivery date  - but this would put all of the delivery dates then to be the same
    Your help would be much appreciated, as the Operatives are doing this line by line, order by order at the moment
    Many thanks
    Tony

    Dear Tony,
    Won't You able to change the same Via LSMW (or through BDC-Program)?
    Just check whether the T. Code: MASS, could be useful
    Best Reagrds,
    Amit

  • Error while loading data from sales order header via LO-Cockpit extraction

    Hi Guys
    I activated sales order header d/source 2lis_11_vhdr using 3x funtionality ontop of BI 7.0 dataflow. While creating infocube I am getting an error saying that " Infoobject 0RATE_TYPE is onl allowed as an attribute (not in infoprovider)"
    Also while creating the same cube I am not able to move UNIT objects to UNIT dimension (as it dont allow me to drag and drop)
    Can anyone please advise me why I am not able to activate cube based on above mentioned error.
    Thanks in advance.
    regards

    Hi,
    To be able to load transaction data for 2010, you should have the master data for that in the time dimension. For this, you need to go to BPC admin and add the dimension members in the time dimension manually.
    Alternatively, you can have a process to import master data from BI system also. You can do some more research on this. Please refer to the below link from help.sap:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/46/fcc2ef34ee439aaa56a4f6ba001e4d/content.htm
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/e0/532af2d0804218a59157136bb63a98/content.htm
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/73/0f917879fd416099d04fb4c49889e0/content.htm
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/88/e16046853041b391314a91bfe3618b/content.htm
    Hope this helps.

  • SAP Mobile Sales 2.0 delta load issue for Sales Orders

    Hello,
    we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
    Background
    Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
    During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
    Settings and troubleshooting so far
    We don't have any limitations for sales orders in CRM Sales Mobile configuration.
    We've run delta loads for all objects in transaction SDOE_LOAD.
    MAS_CUSTOMIZATION etc seem fine.
    We've re-run initial load for sales orders from CRM.
    In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
    Checked steps suggested in discussion
    SAP CRM 2.0 initial load issue
    Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
    If I change one of those historical sales orders in the backend, it gets sent to the device.
    If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
    To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

    First Doubt i got clarify by my self as we can go with Unwired Runtime option .
    But i still have doubt in :
    2. How can i Modifying the Main Menu for iOS.
    i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
    Same how can i do for iphone/ipad.

  • Schedule Delivery Date in Sale Order

    Dear All,
    I have an order on 03.11.2009 (today) and its last delivery date is 15.11.2009. It means that I have to deliver the complete order on or before 15.11.2009.
    So where can I put this date in Sales Order?
    Regards,
    Vishal

    Hi Vishal,
    Your Last Delivery Date can be entered in the "Requested Delivery Date" field in the sales order.
    By doing so, the system will give us a confirmation that whether the delivery can be made possible on the Requested Delivery Date or NOT (The status can be seen by going in to the Schedule Line Level of your line item).
    The system also gives us the NEXT POSSIBLE DELIVERY DATE with the confirmed  Quantity as a Second Line item in the Schedule line level.
    The System considers mainly the Material Available Date to come to a conclusion on the Delivery Date of the goods. Also, there are other activities (Loading Time, Transporation Planning Time etc) for which some time will take and that also need to be considered (The same can be seen by going in to the Schedule Line Level of your line item and then click the Shipping button).
    Your Scenario: In your case, the delivery can happen ON OR BEFORE the Last Delivery Date.
    So for that follow the steps:
    Step 1: Put the Last Deliv Date in to the "Requested Deliv Date" field in Sales Order.
    Step 2: After enetering the other necessary details in the sales order then Save it. Now go the Schedule Line level of your line item and look for the Confirmation of the Delivery Quantity on the Requested Delivery Date.
    If Yes: Then its your wish that you can Prepond the Delivery Date by giving the required Delivery date during your delivery document creation.
    If No:
    Then you have look for the Next Possible date. OR Make sure that you can manage all your other activities like Loading, Transporation Planning etc. in 10 - 12 days time and make your material Availabilty today and do the delivery.
    Reagrds

  • How to syatem determine delivery date in sales order

    hi sap gurus
    how to syatem determine delivery date in sales order
    Thanks and regards
    ram

    Hi Friend,
    There are many things which determines the delivery dates.
    01. PICK TIME+ PACK TIME +LOADING TIME
    02. LEAD TIME in days (VOV8)
    03. Shipping point
    04. Scheduling line
    05. Kind of availblity check
    06. If the above things are maintained as blank then the current date will be the delivery date
    However whether it must be proposed by the system or not is determined by one check box there find in VOV8 in requesteed delivery date determination tab.

  • Change Delivery date in Sales Order

    Hi all
    I want to change Request Delivery Date in Sales Order. But when I changed Request Delivery Date system appear" The default date is not copied into existing schedule lines"
    And Delivery Date didn't change.Could you tell me how to change Delivery Date ?
    I setup Request Delivery Date - September 21th but Availability Date is September 19th. Could you tell me how to setup loading time, picking time, packing time ?
    Thank and Best regards,
    Thang

    Hi,
    When you change the Request Delivery Date, it automatically changes the schedule line date of all the materials, but by default does not change the schedule line date of the ordered material.
    So just check the ordered material schedule line date and change it manually in the order.
    Similarly maintain the same date in all the resp fieldsi in the delivery, wherever you see the date.
    Regards,
    Siddharth.

  • Determination of First Date in Sales Order

    Hello SAP Friends, 
    Below is the issue we realised during the testing. The issue is with First date in the Sales Order which is not updated as per Unloading Point Calendar .
    As per details I received, it should refer Unloading Point Calendar for ShiptoParty and populate the next working day as First date into Sales Order.
    How is First Date determined in the sales order?  Is there any config settings which is based on Route to do this? Or Is it controlled purely based on settings done in Tcode: VOV8, Leadtime days? I do not think VOV8 settings is controlling that in our APO system.
    I have checked MAD, Pick/Pack, GI date all are populated correctly, But First Date did not follow the logic Unloading Point Calendar of ShiptoParty.
    Please let know your inputs in this regard.
    Thank you
    Satish Waghmare

    Satish,
    I unfortunately don't have a solution for you.  However, here are a few observations, and a question.
    My experience is that 'First Date' in R/3 is not determined.  In every sales order I have ever seen, First Date is proposed (matches the requested delivery date in the Sales order header) by the system, but can be overridden by any changes that the user may elect to make.
    Generally, then, after First Date is entered, the R/3 system then may be configured to determine certain master data:  Shipping Point, Unloading Point, Route, Route Schedule.  From this master data, if you are performing ATP in R/3, the system will then also calculate various dates (if configured) for the confirmed schedule proposal:  Normally these calculated dates are Delivery Date, Goods Issue Date, Loading Date, Material Availability date, Transportation Planning Date.  If you have configured Route Schedules in R/3, other dates may be determined.
    If you are performing ATP in APO, then any such scheduling must be performed in APO.  Relevant Master data that was determined in R/3 is carried across to APO during the ATP check and is then used to calculate appropriate durations.  This does not happen automatically, you have to configure the scheduling technique you wish to use in APO.
    So, my first question:  Are you performing ATP in APO?  If not, then you should probably close this post, and re-enter in one of the SD forums, since it is an SD issue.  If you are performing ATP in APO, then what scheduling technique are you using?
    Best regards,
    DB49

  • Calculation of dates in Sales order in gATP

    Hi
    Can anybody please tell me how scheduling works for the following dates in sales orders for materials planned in gATP.
    1) Unloading date 2) Delivery date 3) Goods issue date 4) Loading date 5) Material availability date 6) Transportation planning
    My understanding is that gATP gives the MAD date and other remaining dates like transportation planning date, unload date etc are calculated using master data in the calling system eg ECC.
    We are facing an issue in our system where if a material is planned in ECC, it has all dates in the sales order calculated as expected based on ECC master data.
    If the same material is planned in gATP, it simply copies the MAD date to all other dates. So it is not considering the pick/pack , transportationplanning times from the ECC master data.
    Is this standard system behaviour and to avoid this  Do we need to activate Scheduling in gATP along with master data maintenence in APO ?or any user exit plus execution steps is avaialble to by pass APO master data mentaince.
    Appreciate your responses...Regards - Amit

    Amit,
    We are facing an issue in our system where if a material is planned in ECC, it has all dates in the sales order calculated as expected based on ECC master data.
    If the same material is planned in gATP, it simply copies the MAD date to all other dates.
    The system where the parts are planned is irrelevant.  The important issue is the system where the ATP is conducted.
    My understanding is that gATP gives the MAD date and other remaining dates like transportation planning date, unload date etc are calculated using master data in the calling system e.g. ECC.
    I have never seen that statement validated in any SAP documentation.
    From online help:
    SAP R/3 uses the order type to determine whether shipment scheduling or transportation scheduling should be executed.
    If scheduling is activated, SAP R/3 determines a plant for the material for each item. If it is specified in the integration model that the availability check should take place in SAP APO for a material in this plant, transportation and shipment scheduling also takes place in SAP APO.
    Standard SAP APO GATP supplies three different methods for shipment scheduling.  If you are conducting ATP in APO, and you have not configured one of the three scheduling methods, then shipment scheduling does not take place, and the system will react as you have described.  
    Read up on it here
    http://help.sap.com/saphelp_scm70/helpdata/EN/05/f8923945b12c4de10000000a114084/frameset.htm
    Best Regards,
    DB49

  • SAles Order not appearing in Sales Data Warehouse SAles Order List

    Hi Gurus,
    Can you help me in this regard :- My Sales Order has been invoiced but its not appearing in the Sales Data Warehouse Sales Order List.

    Hi poonam,
    I don't get clearly, but mean here your sales order doesn't exist in your cube or ODs in BW.
    If so check the delta load has been done or not.
    Before that check in tables VBAK (Header data) and  VBAP (Item data) , wheather your sales order exists.
    Hope this helps.
    Regards,
    Reddy

  • Delivery Date in Sale Order

    Dear All
    Delivery date in sales order should automatically changed or by defalt it should be after 2 days of creating the sales order.
    I have tried with lead time period and the ways given in the forum, but the schedule line/delivery date is by default coming as the day of sale order creation.
    Please guide me how to do it.
    Regards
    SB

    Hi,
    Goto Tcode: VOV8
    select sales document types
    goto request delivery date tab
    remove tick mark or uncheck propose delivery date
    and maintain lead time 2 days.
    thanks.

  • Two Delivery dates in Sale Order against one item

    Dear All
    I need two delivery dates in sale order. one is default at the time of creation sale order. second i need actual delivery date which will be confirmed by production planning department after analysis the order whether material can be ready on that delivery date or it need to change. Actual delivery date may vary from original delivery date and both need to preserve in system. kindly provide solution. best regards.
    Manjit

    You need to select the Availability & Transfer of Req. check box in Schedule Line Configuration.It will transfer the req. to PP.So while creating the sale order , schedule Lines will be confirmed as per the Available Stock.
    System will give you the Default Delivery Date as the Date added after Lead Time in days in the Configuration.Else system will give the Current Date.
    Best regards,
    Ankur

  • How system determine delivery date in sales order

    Hi, sap gurus
    I am new to sdn forum please help me regarding my question
    1) how the system will determine delivery date in sales order
    2) what are factors effects to conform sales order stock
    3) what is different between static check and damanic check in credit mgt
    Thanks and regards
    nishad

    hi,
    Reg question:1 - System determines the Requested Delivery Date based on the Scheduline assigned to the item category of the item in sales order.the schedule line in the order transfers the requirements trhu MRP (can be individual or collective) . If its ruch order , you configure the order type "Deliver Immediately".
    In Detail:
    The TOR depends on the Requirement Type (MMR), Requirement Class(MMR), Checking group(MMR) and the Sc line category (Line Item). For the TOR to happen u need Plant at line item, scheduline category markd for TOR, Requirement Class marked for TOR and Checking group in MMR (Availability check)
    What all stocks need to be checked during Availability check is controlled by using the checking rule.. for example for AV -02 Ind Requirements a checking rule will be assigned and this checking rule- and then what all stocks need to be considered to determine the delivery can be maintained here.
    Rgds
    Sai

  • Schedule line date in Sale order for backward sched.

    Dear Experts,
    In my MTO Scenario, I want to Use Backward Scheduling, so as any change in Schedule line dates in Sale order shall take effect at least in planned order Stage, i.e in output of MRP,
    But not happening so..
    I  have customized OPU5 and checked OPU3 as well,
    Please suggest...
    Regards
    Raghu

    HI Mario,
    Thanks for reply,
    I have not worked in this strategy but will try,
    What i found was, in Planned orders detailed scheduling tab, the Scheduling type appeares to be Forward, but when i convert it to Production order it shows backward scheduling.
    This duel behavior is difficult to understand.
    Regards
    Raghu

  • Delivery date and sales order creation date

    Dear all
    Can you please explain the relation between delivery date and sales order date. In my case i can create delivery with delivery date as before the sales order date... how it is possible that i can create delivery before the sales order date.??
    Please explain.........
    Warm Regards
    Inder Pal

    Hi,
    Sales order date: Date on which the customer officially places an order to your company.
    All the commitment and product allocation counting starts with reference to this date.
    e.g. customer says that the goods are required from 20 days of placing order, then from this date the calculation starts.
    Delivery date: Date on which after the system goes through material availability date, replenishment time, calculates the date on which physically the goods can be delivered to the customer.
    e.g. customer orders 100 qty of material X in 15 days, you will hve to check this delivery date through availability check which can be done in sales order and also delivery.
    payment date is based on this delivery date.
    regards,
    Siddharth.

Maybe you are looking for

  • Enterprise Manager Console missing

    I have installed the oracle software 10.2.0 ,I have got all the components like database and all installed but i could not find the enterprise manager console part installed. As some of viewers suggested me that OEMC comes out to be online.. But i wa

  • Might be getting a 5g iPod... want to know about videos...

    Hello everyone, I just sent in my iPod Photo to get "fixed"by Apple and said "replacement sent" since Apple doesn't even sell iPod Photos anymore I might be getting an iPod Video...idk Anyway, I wanted to know if I have about sixty videos in Quicktim

  • Display decimal values in report

    Hi all, I have one question concerning the display of decimal values smaller than '1' in a report. In an SQL query some calculations are done and the result is displayed in a report. The problem is, that if the value of the result is smaller than '1'

  • Bex Upgrade

    Hi All, We are upgrading our web templates from 3x to 7x and want to know if the below options can be specifically enabled in 7x webtemplates 1. When I execute any web template and open the F4 help window for any variable in the variable entry screen

  • Best way to transfer Betacam SP tapes to AVI files?

    What would be the most cost effective way to transfer Betacam SP tapes to AVI files? I have a Betacam SP deck, Final Cut, and a Mac Pro. I just need to connect the Betacam SP deck to the Mac Pro. Thank you in advance for any thoughts.