Loading in infopackage takes lot of time

Hi Friends,
When i schedule and activate the process chain everyday, it takes lot of time to get loaded in the infopackages, around 5 to 6 hours.
in st13 when i click on the Log id name to see the process chain.
in the LOAD DATA infopackage it shows green, after double clicking on that, process moniter
i see request still running and its yellow but 0 from 0 records.
and this will be the same for hours
Its very slow.
need your guidence on this
Thanks for your help.

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Regards,
Habeeb

Similar Messages

  • Loading into the Infipackages takes lot of time

    Hi Friends,
    When i schedule and activate the process chain everyday, it takes lot of time to get loaded in the infopackages, around 5 to 6 hours.
    in st13 when i click on the Log id name to see the process chain.
    in the LOAD DATA infopackage it shows green, after double clicking on that, process moniter
    i see request still running and its yellow but 0 from 0 records.
    and this will be the same for hours
    Its very slow.
    need your guidence on this
    Thanks for your help.

    Hi,
    What are you trying to load using this process chain? If it is cube, are you deleting the indexes on the cube before starting the load. If not, include that step as well in the process chain. This will help in getting improved performance.
    Ideally it is always a good practice to delete the indexes before loading.
    Regards,
    Yogesh

  • Importing SLD content takes lot of time in Solman 4.0

    Hi Folks,
    Importing SLD content takes lot of time while installing Solution Manager 4.0. Its in the 42nd phase of 45...SQL 2005 DB.
    Its stuck in Configuring system landscape directory....and NOT thrown any error as of now...touch wood.
    Can anyone tell me how much time does it take OR is it gone in a loop?

    HI All,
    Finally I have received an error during the above mentionde phase....
    sapinst.log  -
    >>>
    Import Status: PREPARING
    Import Status: PREPARING
    Import Status: PREPARING
    ERROR: CIM_ERR_FAILED: IO error: Read timed out
    <BR>CONFIGURATION=
    ERROR 2007-10-22 15:55:34
    CJS-30059  J2EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
    java.exe.log -
    >>>
    Import Status: PREPARING
    TYPE=A<BR>STATE=<BR>INFO_SHORT=com.sap.sld.api.wbem.exception.CIMCommunicationException: com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: IO error: Read timed out
         at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:158)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:720)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:694)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:638)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.referencesImpl(WBEMRemoteClient.java:375)
         at com.sap.sld.api.wbem.client.WBEMClient.references(WBEMClient.java:1773)
         at com.sap.sld.api.wbem.client.WBEMClientUtil.referencesComplete(WBEMClientUtil.java:490)
         at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.collectAssociationsForRestoration(SAPCRUpgrade.java:700)
         at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.delete(SAPCRUpgrade.java:355)
         at com.sap.lcr.pers.delta.importing.ImportHandler.loadFullImport(ImportHandler.java:1765)
         at com.sap.lcr.pers.delta.importing.ImportHandler.loadImpl(ImportHandler.java:1605)
         at com.sap.lcr.pers.delta.importing.ImportHandler.load(ImportHandler.java:1573)
         at com.sap.ctc.util.SLDConfig.importSldContent(SLDConfig.java:812)
         at com.sap.ctc.util.SLDConfig.performFunction(SLDConfig.java:154)
         at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:69)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.net.SocketInputStream.read(SocketInputStream.java:182)
         at com.tssap.dtr.client.lib.protocol.streams.ChunkedInputStream.readLine(ChunkedInputStream.java:323)
         at com.tssap.dtr.client.lib.protocol.streams.ResponseStream.readLine(ResponseStream.java:271)
         at com.tssap.dtr.client.lib.protocol.impl.Response.initialize(Response.java:476)
         at com.tssap.dtr.client.lib.protocol.Connection.getResponse(Connection.java:2604)
         at com.tssap.dtr.client.lib.protocol.Connection.sendInternal(Connection.java:1578)
         at com.tssap.dtr.client.lib.protocol.Connection.send(Connection.java:1427)
         at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
         ... 30 more
    caused by:
    java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.net.SocketInputStream.read(SocketInputStream.java:182)
         at com.tssap.dtr.client.lib.protocol.streams.ChunkedInputStream.readLine(ChunkedInputStream.java:323)
         at com.tssap.dtr.client.lib.protocol.streams.ResponseStream.readLine(ResponseStream.java:271)
         at com.tssap.dtr.client.lib.protocol.impl.Response.initialize(Response.java:476)
         at com.tssap.dtr.client.lib.protocol.Connection.getResponse(Connection.java:2604)
         at com.tssap.dtr.client.lib.protocol.Connection.sendInternal(Connection.java:1578)
         at com.tssap.dtr.client.lib.protocol.Connection.send(Connection.java:1427)
         at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:720)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:694)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:638)
         at com.sap.sld.api.wbem.client.WBEMRemoteClient.referencesImpl(WBEMRemoteClient.java:375)
         at com.sap.sld.api.wbem.client.WBEMClient.references(WBEMClient.java:1773)
         at com.sap.sld.api.wbem.client.WBEMClientUtil.referencesComplete(WBEMClientUtil.java:490)
         at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.collectAssociationsForRestoration(SAPCRUpgrade.java:700)
         at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.delete(SAPCRUpgrade.java:355)
         at com.sap.lcr.pers.delta.importing.ImportHandler.loadFullImport(ImportHandler.java:1765)
         at com.sap.lcr.pers.delta.importing.ImportHandler.loadImpl(ImportHandler.java:1605)
         at com.sap.lcr.pers.delta.importing.ImportHandler.load(ImportHandler.java:1573)
         at com.sap.ctc.util.SLDConfig.importSldContent(SLDConfig.java:812)
         at com.sap.ctc.util.SLDConfig.performFunction(SLDConfig.java:154)
         at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:69)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    //   => Importing Data : E:/usr/sap/SOL/SYS/global/sld/model/CR_Content.zip URL=http://devsrv:50100 USER=J2EE_ADMIN ...
    Import Status: PREPARING
    ERROR: CIM_ERR_FAILED: IO error: Read timed out
    <BR>CONFIGURATION=

  • Query from source table takes lots of time

    I have to load data from an Oracle table which has millions of records. The loading knowledge module I am using is 'lkm sql to oracle'.
    I see that the query from the source database takes lot of time and doing a full table scan where as it supposed to be using an index.
    I dont have any lkm with 'lkm oracle to oracle'. Some how I need to add a hint to this source query. How I can do this?

    This LKM is not indicated to large volume of data, try to use LKM Oracle to Oracle (DBLINK), see ODI KMs documentation for more information.
    Related to HINTS you can add this with KM options, see that some Oracle ODI11g new KMs already have some options to do it, so you can put the hint on interface options of KM or define the temp index on the interface

  • Urgen!! Query takes lots of time to execute and the production is in effect

    Hi,
    We have some data loading script. This scripts takes lots of time to execute. As Iam new to tunning please do let me know what is the wrong with the query !!
    Thanks In advance
    Query:
    =========
    INSERT /*+ PARALLEL */ INTO ris.ris_pi_profile
    (ID,COUNTRY_OF_CITIZENSHIP,IMMIGRATION_STATUS,SSN,DOB,GENDER,
    ETHNICITY,RACE,DEPARTMENT,DIVISION,INSTITUTION_ID,INST_EMAIL,EFFECT_DATE,ACADEMIC_TITLE,ACADEMIC_POSITION,
    OTH_PER_DATA,PCT_RESEARCH,PCT_TEACHING,PCT_CLINICAL,PCT_ADMIN,PCT_OTHER,PCT_TRAINING)
    SELECT
    ap.id,
    p.citizen_cd,
    decode(p.visa_cd,'CV',0,'F1',1,'H1',2,'H1B',3,'H2',4,'J1',5,'J2',6,'O1',7,'PR',8,'PRP',9,'TC',10,'TN',11,'TNN',12),
    (select n.soc_sec_num from sa.name n where n.name_id = p.name_id),
    (select n.birth_date from sa.name n where n.name_id = p.name_id),
    (select decode(n.gender_cd,'F',1,'M',2,0) from sa.name n where n.name_id = p.name_id),
    (select decode(n.ethnic_cd,'H',1) from sa.name n where n.name_id = p.name_id),
    (select decode(n.ethnic_cd,'A',2,'B',3,'I',1,'P',4,'W',5) from sa.name n where n.name_id = p.name_id),
    a.dept_name,
    a.div_name,
    a.inst_id,
    (select n.email from sa.name n where n.name_id = p.name_id),
    a.eff_date,
    ac.acad_pos_desc,
    p.acad_pos_cd,
    0,
    p.research_pct,
    p.teach_pct,
    p.patient_pct,
    p.admin_pct,
    p.other_pct,
    p.course_pct
    FROM
    appl1 ap,
    sa.personal_data p,
    sa.address a,
    sa.academic_pos_cd ac,
    profile_pi f
    WHERE
    p.project_role_cd='PI'
    and ap.appl_id=f.appl_id
    and p.appl_id=f.appl_id
    and p.name_id=f.name_id
    and a.addr_id=f.addr_id
    and p.acad_pos_cd=ac.acad_pos_cd
    AND EXISTS (select 1 from ris.ris_institution i WHERE i.id = a.inst_id)
    AND EXISTS (select 1 from sa.academic_pos_cd acp WHERE acp.acad_pos_cd = p.acad_pos_cd);
    In the execution PLan I see lots of Nested loop, Hash Join
    Index( Unique scan)
    Table Access by ( Index rowid)
    This query is fast in Test DB but ver very slow in prod DB. Need your help Urgent.
    Minaz

    When your query takes too long...
    When your query takes too long ...

  • BO Report in 4.0 takes lot of time to open

    Hi We are having BO 4.0 environment.
    The underline database is SAP BW and BO reports are built on top of Bex queries.
    We found that it takes HELL a lot of time sometimes to open in BI launch pad/Infoview.
    Just for opening it takes lot of time we cound found that actually it is not running anything in BW or else .
    Could you tell us better integartion or alternate solution even for integartion of BI/BO or may be there would be some problem with interface betwwe BO and BW .
    eg Tomcat server slow etc ..
    Thanks
    Gaurav.

    Hi Denis,
    Extremely Sorry for not providing enough information.
    Business Objects is of BO 4.0 FP3 SP12.
    BI is 7.10  Support Package 10 and Revision 627.
    The point is While Opening Report In BO 4.0,it takes lot of time to open.
    This generally happens whenever we have  to open  report for the first time in laptop/Desktop machine.
    This always happens whenever we open the report for first time. (Generally  when we have demo team metting to show our reports to management level and we face it takes lot of time )
    Could you let us know for the same if someone else has also received this.
    Please let me know if any other details is required.
    Regards
    Gaurav.

  • Inserting into a base table of a materialized view takes lot of time.......

    Dear All,
    I have created a materialized view which refreshes on commit.materialized view is enabled query rewrite.I have created a materialized view log on the base table also While inserting into the base table it takes lot of time................Can u please tell me why?

    Dear Rahul,
    Here is my materialized view..........
    create materialized view mv_test on prebuilt table refresh force on commit
    enable query rewrite as
    SELECT P.PID,
    SUM(HH_REGD) AS HH_REGD,
    SUM(INPRO_WORKS) AS INPRO_WORKS,
    SUM(COMP_WORKS) AS COMP_WORKS,
    SUM(SKILL_WAGE) AS SKILL_WAGE,
    SUM(UN_SKILL_WAGE) AS UN_SKILL_WAGE,
    SUM(WAGE_ADVANCE) AS WAGE_ADVANCE,
    SUM(MAT_AMT) AS MAT_AMT,
    SUM(DAYS) AS DAYS,
    P.INYYYYMM,P.FIN_YEAR
    FROM PROG_MONTHLY P
    WHERE SUBSTR(PID,5,2)<>'PP'
    GROUP BY PID,P.INYYYYMM,P.FIN_YEAR;
    Please help me if query enable rewrite does any performance degradation......
    Thanks & Regards
    Kris

  • Execution of first request takes lot of time with JDBC OCI

    Hi,
    We are having an application which connects to Oracle server(10g Enterprise Edition Release 10.2.0.4.0 64bit) using Oracle JDBC OCI driver(10.2.0.1.0 production (10g R2)).
    Everything works fine.
    But what we observed is randomly the first request to the server vai JDBC driver in a day takes lot of time, varies from 5-15 minutes.
    If we execute the request again it executed immediately
    What we observed while debugging is preparedStatement.executeQuery() is taking time.
    We enabled logging at the JDBC driver layer and a snapshot isgiven below. Between T2CPreparedStatement.doDefineExecuteFetch () and T2CPreparedStatement.execute_for_rows () it takes 5 minutes. Any idea why it takes this much time and reason for it? Oracle driver is not throwing any exceptions
    *4-apr-2011 4:00:01* oracle.jdbc.driver.T2CPreparedStatement doDefineExecuteFetch
    FINE: T2CPreparedStatement.doDefineExecuteFetch ()
    *4-apr-2011 4:05:12* oracle.jdbc.driver.T2CPreparedStatement executeForRows
    FINE: T2CPreparedStatement.execute_for_rows () returns: void
    Detailed jdbc log is below
    -apr-2011 4:00:01 oracle.jdbc.driver.OracleStatement doExecuteWithTimeout
    FINE: OracleStatement.doExecuteWithTimeout() needToPrepareDefineBuffer = false
    4-apr-2011 4:00:01 oracle.jdbc.driver.PhysicalConnection needLine
    FINE: PhysicalConnection.needLine()--no return
    4-apr-2011 4:00:01 oracle.jdbc.driver.PhysicalConnection registerHeartbeat
    FINE: PhysicalConnection.registerHeartbeat()
    4-apr-2011 4:00:01 oracle.jdbc.driver.OracleStatement executeMaybeDescribe
    FINE: OracleStatement.execute_maybe_describe() rowPrefetchChanged = false, needToParse = false, needToPrepareDefineBuffer = false, columnsDefinedByUser = false
    4-apr-2011 4:00:01 oracle.jdbc.driver.T2CPreparedStatement executeForRows
    FINE: T2CPreparedStatement.execute_for_rows (executed_for_describe = false)
    4-apr-2011 4:00:01 oracle.jdbc.driver.T2CPreparedStatement doDefineExecuteFetch
    FINE: T2CPreparedStatement.doDefineExecuteFetch ()
    4-apr-2011 4:05:12 oracle.jdbc.driver.T2CPreparedStatement executeForRows
    FINE: T2CPreparedStatement.execute_for_rows () returns: void
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleStatement executeMaybeDescribe
    FINE: OracleStatement.execute_maybe_describe():return validRows = 1, needToPrepareDefineBuffer = false
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleStatement doExecuteWithTimeout
    FINE: OracleStatement.doExecuteWithTimeout():return validRows = 1, needToPrepareDefineBuffer = false
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
    FINE: OracleResultSetImpl.next(): closed=false
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
    FINER: closed=false, statement.currentRow=-1, statement.totalRowsVisited=0, statement.maxRows=0, statement.validRows=1, statement.gotLastBatch=true
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getString
    INFO: OracleResultSetImpl.getString(columnIndex=1)
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
    INFO: OracleResultSetImpl.wasNull()
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getString
    INFO: OracleResultSetImpl.getString(columnIndex=2)
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
    INFO: OracleResultSetImpl.wasNull()
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getString
    INFO: OracleResultSetImpl.getString(columnIndex=3)
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
    INFO: OracleResultSetImpl.wasNull()
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
    INFO: OracleResultSetImpl.wasNull()
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getTimestamp
    INFO: OracleResultSetImpl.getTimestamp(columnIndex=4)
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
    INFO: OracleResultSetImpl.wasNull()
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
    INFO: OracleResultSetImpl.wasNull()
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
    FINE: OracleResultSetImpl.next(): closed=false
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
    FINER: closed=false, statement.currentRow=0, statement.totalRowsVisited=1, statement.maxRows=0, statement.validRows=1, statement.gotLastBatch=true
    4-apr-2011 4:05:12 oracle.jdbc.driver.PhysicalConnection needLine
    FINE: PhysicalConnection.needLine()--no return
    4-apr-2011 4:05:12 oracle.jdbc.driver.T2CPreparedStatement closeQuery
    FINE: T2CPreparedStatement.closeQuery ()
    4-apr-2011 4:05:12 oracle.jdbc.driver.T2CPreparedStatement closeQuery
    FINE: T2CPreparedStatement.closeQuery () returns: void
    4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl close
    INFO: OracleResultSetImpl.close()
    Regards
    Sunil

    Hi,
    Thanks for the reply
    - SQL may vary. Its not the same query which takes time always. The same query executed immediately(using another connection from pool) works perfectly
    - If there is a failover or stale connection getting closed or timeout, will JDBC driver thhrows exdeption? I didn't see any exceptions in the driver logs. Is there anyway to identify whether failover or timeout is happening?
    Some other points
    - The application uses connection pooling. This means that connections are created in the beginning and kept in the pool. And it may be in the pool for 72 hours or , before this issue happens
    - Application uses prepared statements and the statements are preapred and kept and re used later. So the query which take s more time might be prepared before 48 hours or so.
    - This is not happening every day. Many times the pattern is , it happens after 60-72 hours after application is started.
    Sunil

  • Read cluster PCL4 .. takes lot of time

    Hi guys,
      Though I Know this is a functional related forum, i would want to post  techincal question related HR ABAP.
    I have a report that needs to read data from PCL4 cluster and display master data changes for an employee. Developed a big program to simulate "RPUAUD00" that displays the logged data.
    My concenr is the program that i developed is taking minutes to execute. I am using the 2 function modules "HR_INFOTYPE_LOG_GET_LIST" and "HR_INFOTYPE_LOG_GET_DETAIL" for this purpose. 
    The function module "HR_INFOTYPE_LOG_GET_LIST" takes lot of time to get executed as it checks all the personnel number with hanges even if there was only one personnel number that was changed. Assuming that my personnel area and personnel sub area has 2000 employees, even if one employee's data is changed, the function module reads the cluster for all the employee and takes a few minutes to comeback, before the function module "HR_INFOTYPE_LOG_GET_DETAIL" is executed to  get the exact details changerd. This is irritating the client. Any idea how to reduce the time as i am severely short of ideas as how to.
    regards
    Sam

    Unless you pass the exact pernr, the function cannot determine without looking at all the pernrs for changes..If your program tied to PNP, you can improve the run time passing the pernr list to the function call HR_INFOTYPE_LOG_GET_LIST..
    ~Suresh

  • Infoobject F4 help in the Query takes lot of time and hangs

    Hi All,
    I have 0Material in the query and the F4 help  for selection takes lot of time and hangs after some time.
    The 0Material has 2 million records the  Infoobject properties for Bex are as below:
    Selection:No selection restriction
    Query Def. Filter Value Selection: Values in Master Data Table
    Query Execution Filter Val.Selectn:Only Posted Values for Navigation
    We tried to alter some of the Properties but we have the same issue.
    Suggest other options that can be be looked into to get the F4 help in the Query .
    Thanks,
    Mike

    hi Mike,
    check if helps
    Note 817335 - Performance in F4 Help 
    Note 748623 - Input help (F4) has a very long runtime - recommendations
    Note 581802 - Variable dialog boxes: performance of the F4 help
    search oss note for f4 performance ......

  • Hierarchical tree take  lot of time to populate

    Hello fellows
    I have a form using hierarchical list. when populate it from the record group it take lot of time.
    this record group is using four loops and outer loop range is from 1 to 3000 and all inner loops range is from 1 to 3,
    Oracle.exe get time of 1 minute to populate record group and ifrun60.exe get time of 5 minutes to display tree.
    have you any suggestion to improve the performance of this form

    Hi all
    In order to populate tree faster its better not to populate it using Record Group.
    use the htree fucntions for parent and child nodes in the populate tree trigger or When node selected trigger.
    Ahsan

  • Sun Studio 12 takes lot of time to startup

    Hi,
    When I try to use sunstudio 12 on a Solaris 10 U6 x86 box, it takes ages to open the UI window.
    The window kind of hung state with out any messges showing in it until it comes up with full screen.
    Debugging from sunstudio takes lot of time when we try step to the code.
    Is this a known issue?. Any workaround?.
    The Solaris system has 8GB RAM and plenty of disk space.
    Thanks

    Thank you for the report! No, it is not a known issue.
    I use Sun Studio IDE on Solaris 10 x86 system with 2 Gb memory.
    Its responsiveness is ok (though sometimes it parses my projects
    for 10-20 seconds, but it happens only 2-3 times per day).
    The "startup" time is about 20-30 seconds.
    Let's try to find out what is the problem on your system.
    Can you run "sunstudio" under "truss -d" and look at the log file?
    Here is the command:
    truss -d -a -e -f -o ss.tr  sunstudio  --userdir /tmp/newuserdir It will create a log file "ss.tr" in current directory. Open it in a text editor,
    and look for long actions. Probably there is something in your HOME
    directory, that causes these delays.
    If you don't see anything suspicious, let me know. I'll take a look at the
    log file (though it can be several Mb, so we have to find out how to send it).
    Thanks,
    Nik

  • FBL3N T-code takes lot of time to produced output.

    Hi expert,
    FBL3N T-code takes lot of time to produced output.
    and many times accure TIME_OUT Runtime error.
    REgards,

    Hi Vivek,
    When you run the T-code FBL3N , Monitor SM50 and check the tables and run the statistics on the specified tables using Db20 t-code.
    Refer to below link for more information.
    http://help.sap.com/saphelp_nwpi71/helpdata/en/45/d59f51b3735594e10000000a1553f7/content.htm
    Also
    Refer to Note 1135916 - Line items: Help for analysis for long runtime
    Check whether a suitable database index has been created in the dictionary (transaction SE11 -> indexes). If no index has been created, create the corresponding index and activate it.
    Possible fields may be:
    BSIS/BSAS:  MANDT, BUKRS, HKONT, BUDAT
    BSIK/BSAK:  MANDT, BUKRS, LIFNR, BUDAT
    BSID/BSAD:  MANDT, BUKRS, KUNNR, BUDAT
    Regards,
    Sravanthi
    Edited by: Sravanthi.sap on Jan 9, 2012 10:17 PM

  • Unknown machines takes lot of time to reflect in collection

    Hi,
    Sometime it is observed that while adding unknown machine , it takes lot of time to reflect in collection.If anyone one have any idea about this and soluton, please share solution if any.Also let me know the possible cause for this.
    Regards, Shishir Kushawaha "If this thread answered your question, please click on "Mark as Answer"

    If I understand you correctly - you see this issue when you import a unknown computer into ConfigMgr 2012 by specifying name and MAC/SMBIOS GUid. Youo properly select a Collection during this import where you want to place the machine.The reason that it
    takes some time for the machine to appear in the Collection is because the Limiting Collection (Properly All Systems) has to be updated before the child Collection is updated.
    Because of this - I normally update Collection Membership in All Systems before I update Collection Membership in the "child" Collection.
    But I actually do not need to do it this way because when you update a child Collection, that is using All Systems as a limiting Collection - The All Systems Collection is updated as well automatically.

  • WHY IT TAKES LOT OF TIME WHILE STARTING MAC, WHY IT TAKES LOT OF TIME WHILE STARTING MAC

    wht it takes lot of time while starting mavbook pro???

    abhishek138,
    not knowing anything about your MacBook Pro, no one can say. Please provide additional information about it — which model it is, which version of OS X is installed on it, how much RAM it has, what capacity internal disk it has, and how much free space it currently has.

Maybe you are looking for

  • Photo's Stuck In iPad Complex Situation HELP!

    Okay...here's my problem i have a first gen ipad running ios 5 and a while back the hard drive on my Mac busted so i lost everything but my family photos and important memories are still on that ipad but i don't know how to get it out i don't care mu

  • Templates updating on local server but not on remote in DW CS3

    I'm using Dreamweaver CS3 and am trying to update some templates.  At first, when I checked out the file on the remote server, made the change and saved, it asked me if I want to upload to all pages using that template.  I said yes, and it checked th

  • How to type Korean Characters in command prompt of Korean win2k3/XP

    We are not able to type the Korean multi-bytes in command prompt of Korean-Win2k3/XP. But we able to copy paste the Korean characters command prompt successfully. Here we are using "MS-IME2002" as keyboard type In case of Korean-Win2k8, able to type

  • Create release not picking data from Requisition table

    Hi All, I have imported release data from 11i to R12 through Requisition import program. Data got imported successfully. I have updated BLANKET_PO_HEADER_ID and BLANKET_PO_LINE_NUM column in po_requisition_lins_all table. Then I have ran Create Relea

  • Case-insensitive Search-Highlighting doesn't work..

    Hi, I've got a poblem using the character-highlighting in report regions... There are some html-tags in the searched data, perhaps this can cause some problems? They work, but they don't highlight case-insensitive... Where could be the error? Message