Loading issue : Error: sql error in the database while accessing a table

Hello,
where as one of the DTP in the process chain failed due to *Error: sql error in the database while accessing a table*, where as in the short dump it showing as Transaction log of data base is full., but i checked the data base space in DB02, more space is available . once we run the same DTP by manually its successful. its not through any errors.
could u please help me out solve the problem.
Thanks
siva kumar.

it might be a lock. do you drop index before loading?
the database might be full at the moment of loading and not later if many loadings happen at the same time on the same system...
when you then rerun your dtp manually, it can go through as it's perhaps the only one running at that moment...
you can try to set the btch parameter to 1...this will help in some cases.
M.

Similar Messages

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table

Hi Gurus,
Im getting DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table error while I was importing support pack in the system. This is ERP 6.0 with EHP4 with MS SQL in back ground and I was applying the BASIS SP 04. It was in the TEST scenario and in the SPDD_SPAU_CHECK phase it threw the error.
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "[601] Could not continue scan with NOLOCK due to
     data movement."
    Internal call code.........: "[RSQL/FTCH/E071 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "SAPLSVRT" or "LSVRTU01"
    "TR_LAST_IMPORT_OF_OBJECT"
SPAM is ending with the above short dump. I have checked the space availability and it is OK.
Kindly help.
Renju Aravind.

Hi,
this error is very often seen in case of a database corruptions. Please follow note 142731 and perform a complete database check. Send the results when they show errors.
Best regards
Clas

Getting error "SQL error in the database when accessing a table."

Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
    SQL error in the database when accessing a table.
How to correct the error
    Database error text........: "ORA-01555: snapshot too old: rollback segment
     number 21 with name "_SYSSMU21$" too small"
    Internal call code.........: "[RSQL/FTCH/VBRK ]"
    Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AM

The query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
       VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
       VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
     , VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
     , VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
       inner join VBRP
       on VBRPVBELN = VBRKVBELN )
       where VBRK~BUKRS in SP$00004
         and VBRK~FKDAT in SP$00001
         and VBRK~KUNAG in SP$00002
         and VBRK~VBELN in SP$00006
         and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
    stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
    extract %fgwrVBRP01.
endselect.

Root cause of "SQL error in the database when accessing a table. "

Dear experts,
I meet this dump "SQL error in the database when accessing a table" when executing a sql.
Sql:
    SELECT sesssessno poscrm_serplan_id poscrm_ser_h_id poscrm_ser_i_id
           possolution_id sessbundle_id sessdbid sessinstno pos~crm_ordered_prod
           sessdbid sessinstno
      INTO CORRESPONDING FIELDS OF TABLE et_sess_list
      FROM dsvassessadmin AS sess JOIN service_posn_sm AS pos
        ON possession_id     = sesssessno
      FOR ALL ENTRIES IN lt_contractno
      WHERE sess~contractno = lt_contractno-contract_no
       AND sess~status IN lt_status_range
       AND bundle_id IN lt_bundle_id
       AND pos~solution_id GT 0
This sql works well in dev system SD7, however, it causes dump in another dev system "SMV".
Can anyone give me any ideas?
Thanks

Hi Jovito,
This is info from ST22
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "SQL0101N The statement is too long or too
     complex. SQLSTATE=54001"    Internal call code.........: "[RSQL/OPEN/DSVASSESSADMIN ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "CL_AGS_SERVICE_SERV===========CP" or "CL_AGS_SERVICE_SERV===========CM018"
    "GET_OVS_SESSION_LIST"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "GET_OVS_SESSION_LIST" "(METHOD)", or its possible occurrence must be declared
     in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
It seems that after translation the native sql is too long. But I think this can be solved.

Inbound-Queue SYSFAIL: SQL error in the database when accessing a table

Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
br

Hi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br

Runtime error SQL error 3114 occurred when accessing program CX_ w

Hi Friends,
Iam in a big mess . I have one query based on one my Zinfocube.This query ia attached in the workbook .. Previuolsy all was fine , but now whever iam executing this query it is throwing me the exception
Query 0: Runtime error SQL error 3114 occurred when accessing program CX_ with parallel processing via RFC.
and
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist mÃ¶glich
I am not able to get the cause of error ..
Can anybody help me in this regrd as its a bit urgent.
Thanks in advance..

Hi , thanks for replying ,
I have tried running query through RSRT also , its not working still it is giving me the same error .
In st22 it is showing me the follwing dump.
DBIF_REPO_SQL_ERROR
Short text
    SQL error 3114 occurred when accessing program
What happened?
    The system is no longer linked to an ORACLE instance.
    No further operations can be performed on the database.
What can you do?
    You cannot eliminate this error yourself.
    Please inform your database administrator.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The system attempted to access an ORACLE instance to which
    it is no longer linked.
    This situation may arise because the ORACLE instance
    has been stopped due to an error or an external operation.
How to correct the error
    Database error text........: "ORA-03114: not connected to ORACLE"
    Triggering SQL statement...: "CX_SQL_EXCEPTION==============CP "
    The current status of the ORACLE instance cannot be determined.
    It may be still inactive or the database administrator may have
    restarted it.
    In any case, all systems that have accessed the ORACLE instance
    must be restarted after the ORACLE instance has been restarted.
    If you were working on a central system, inform
    your system administrator.
    If you were working on an external local system, inform
    the person responsible for this system.
    If you were working on your own local system, restart
    the system yourself.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_SQL_ERROR" " "
    "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
    "NEXT_PACKAGE"
    If you cannot solve the problem yourself and want to send an errornotification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
"NEXT_PACKAGE"
Thanks in Advance..

Error: 1013231 Unable to update database while in readonly mode for backup

Hi all,
Wen im deleting the members for dimendsion , its giving error (hyperion 11.1 aso)
Error: 1013231 Unable to update database while in readonly mode for backup , how can i solve this problem ,plz can any one help on this
Thanks

Has somebody set the database ready for archiving, maybe some maxl has been run and the db has not been returned from read only mode.
Try running the following Maxl (change app.db to match your app/db)
alter database app.db end archive;
Cheers
John
http://john-goodwin.blogspot.com/

How to find all sql ran in the database for particular time

Hi All,
i need to find all sql ran in the database between 7am to 9am on may 22 2012 , i can generate AWR but i think it shows only top sql but i need all sql during this time
is any views in oracle to get this information
Thanks

i need to find all sql ran in the database between 7am to 9am on may 22 2012 , i can generate AWR but i think it shows only top sql but i need all sql during this time use below view to get detail.
V$active_session_history
dba_hist_active_sess_history

JSP loading issue: HTTP 404 error

I have a JSP page that stopped loading up.
It gives me the Apache HTTP 404 error that it can not find the JSP page.
There are no servlet classes associated with the JSP page.
Simply, it is an HTML page calling a JSP page.
This issue appeared after we(IT team) incorporated servlets on the machine.
Directory structure changed, but it shouldn't have effected our JSP pages.
Directory structure
../wwwroot/Finance/Labor.html goes to ../wwwroot/Finance/Labor.jsp

And how does the HTML page invoke the JSP page?
Are you doing it via a <form> or are you linking to it through an <a href>?
You really didn't provide very much information. There are a lot of things that could go wrong. For example, Tomcat generally likes its JSPs to be in a specific place which is NOT the default Apache document root. You'd explicitly have to configure Tomcat to use the same Apache document root though.
Similarly, application specific Servlets are usually in a sub-directory of the one containing JSP files for that application. In other words, you don't really put JSPs in c:/JSPs on one machine, HTML in /home/rycherX/www on another machine and Servlets in \\rycherX\workspace\Servlets on a third.
The first place to start is to tell us what Servlet Engine you just installed. Tomcat? JBoss? WebSphere?

SAP installation stopped at ABAP load error: sql error '12537'

Hi ,
I am installing SAP ECC 6.0 with EHP4 and ABAP with Oracle 11G on AIX 6.1 load ended up with the error as below, please help
Import Monitor jobs: running 3, waiting 13, completed 9, failed 3, total 28.
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 10, failed 3, total 28.
Import Monitor jobs: running 3, waiting 12, completed 10, failed 3, total 28.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 12, completed 10, failed 4, total 28.
Loading of 'E071K' import package: OK
Import Monitor jobs: running 1, waiting 12, completed 11, failed 4, total 28.
Import Monitor jobs: running 2, waiting 11, completed 11, failed 4, total 28.
Import Monitor jobs: running 3, waiting 10, completed 11, failed 4, total 28.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 11, failed 5, total 28.
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 1, waiting 10, completed 12, failed 5, total 28.
Import Monitor jobs: running 2, waiting 9, completed 12, failed 5, total 28.
Import Monitor jobs: running 3, waiting 8, completed 12, failed 5, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 2, waiting 8, completed 12, failed 6, total 28.
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 1, waiting 8, completed 13, failed 6, total 28.
Import Monitor jobs: running 2, waiting 7, completed 13, failed 6, total 28.
Import Monitor jobs: running 3, waiting 6, completed 13, failed 6, total 28.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 2, waiting 6, completed 13, failed 7, total 28.
tail -20 SAPSSRC.log
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20111105170542
tail -20 FUPARAREF.log
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12537
DbSl Trace: CONNECT failed with sql error '12537'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/HRQ/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20111105170611

Reasons can be many, you please check whether oracle and listener are up or not. Check 'R3trans -d' and trans.log
Similar problem thread -
error when applying PI_BASIS patch SAPKIPYM03 on ECC 6
Thanks

Error when I create the database

I install the peopletools 8.49 for Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and my operating system is Microsoft Windows Server 2003 Enterprise Edition Server Pack 1, v.1023.
When I have installed the peopletools and the database, I modify the scripts in <PS_HOME>\scripts\nt and then change to <PS_HOME>\setup\PsMpDbInstall and double click setup.exe to run the database configuration wizard. All of the scripts are running correct, but the Data Mover is error. So I run the Data Mover manually. I create Data Mover import scripts and run it. It’s ok. Then I check the logs. I find the follow error:
psadmin.log:
ALTER TABLE SQLPLUS_PRODUCT_PROFILE ADD (LONG_VALUE LONG)
ERROR at line 1:
ORA-00942: table or view does not exist
psdmtx.log:
PSDMTX Error: signon
verifyToolsVer.log:
select TOOLSREL from PSSTATUS *
ERROR at line 1:
ORA-00942: table or view does not exist
sqlnet.log:
Fatal NI connect error 12557, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cs.lab.net)(PORT=1521))(CONNECT_DATA=(SID=PSDB)(CID=(PROGRAM=C:\pt\bin\client\winx86\psdmtx.exe)(HOST=CS)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.5.0 - Production
Time: 19-MAY-2009 15:33:27
Tracing not turned on.
Tns error struct:
ns main err code: 12557
TNS-12557: TNS:protocol adapter not loadable
ns secondary err code: 12560
nt main err code: 527
TNS-00527: Protocol Adapter not loadable
nt secondary err code: 0
nt OS err code: 0
Then I run version application engine program:
C:\Documents and Settings\Administrator>C:\pt\bin\client\winx86\psae.exe -CD PSD
B -CT ORACLE -CO SYSADM -CP SYSADM -R INSTALL -AI VERSION
Message Set Number: 0
Message Number: 0
Message Reason: Invalid User ID and password for signon. (0,0)
Error in sign on
PSDB: database name
SYSADM: peoplesoft owner id
How can I resolve it?

I create the database manually too. The errors are the same. I can login in data mover by SYSADM user or people user and the database and listener is running. However, I run version application engine program:
C:\Documents and Settings\Administrator>C:\pt\bin\client\winx86\psae.exe -CD PSDB -CT ORACLE -CO SYSADM -CP SYSADM -R INSTALL -AI VERSION
Message Set Number: 0
Message Number: 0
Message Reason: Invalid User ID and password for signon. (0,0)
Error in sign on
I change the user to try, it’s the same.
Edited by: hzg on May 21, 2009 9:38 AM

Error in connecting with the database

Hi,
when i try to connect with the database the following error has occured
ORA-12504: TNS:listener name was not given the service name in connect data
solution want

hi,
i has the following in my tnsnames.ora file
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.localdomain)
)

Error in bringing up the database instance

Hi
When I try to bring up the database using the addbctl.sh script in 11i following errors are shown :
ORA-16014: log 4 sequence# 14351 not archived, no available destinations
ORA-00312: online log 4 thread 1: '/apps/prodapps/proddata/log04a.dbf'
ORA-00312: online log 4 thread 1: '/apps/prodapps/proddata/log04b.dbf'
The instance, when connected shows "Oracleinitialization or shutdown is in progress"
Any idea why
Regards
Deepak

Hi,
Refer note:104918.1
Regards,
Bharath.
Edited by: PB Kumar on Dec 19, 2009 11:17 AM

Loading issue : Error: sql error in the database while accessing a table

Similar Messages

Maybe you are looking for