Loading many fxmls at a stretch and using them wen necessary

HI,
Any suggestions on loading many fxmls at a stretch and can be used wen it is necessary.
Like, i have many fxml's in my application, each fxml is taking time wen loading.so it is like a performance issue.
and how can i minimize the use of controllers?
and also plz suggest me, fxml(parent) having fxml (child).

HI,
Any suggestions on loading many fxmls at a stretch and can be used wen it is necessary.
Like, i have many fxml's in my application, each fxml is taking time wen loading.so it is like a performance issue.
and how can i minimize the use of controllers?
and also plz suggest me, fxml(parent) having fxml (child).

Similar Messages

  • How many computers can i install and use lightroom 5 with a single purchase?

    I've got 2 desktops and a laptop at home. Can i install lightroom 5 and use them on all 3 devices? The database is a cloud system or will it be in the local drive?

    you can concurrently install and activate on two computers.
    you can save files using adobe's cloud file service (mainly to sync your files) but you should always have local copies saved.

  • This may sound like a stupid question,,,but can i downlaod other programmes to my ipad, and use them like i would on a pc/net book ?

    this may sound like a stupid question,,,but can i downlaod other programmes to my ipad, and use them like i would on a pc/net book ?

    No.
    It is not a replacement for a computer.
    It mirrors the selected content of your computer.
    The only programs that can be loaded on an ipad are those found in the app store.

  • All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

    I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

    I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
    This is very irritating !! If I wanted Yahoo I would ask for it !

  • How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

    I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
    1. InitialProposal Stage
    2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
    3. Rejection Stage
    4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
    5. Execution Stage
    6. Completed Stage
    Requirement is workflow should move to Approval stage2 from Approval stage1  if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
    Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
    I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
    On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
    but I'm not able to retrieve comments from officeTask activity.
    My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

    Hi Paul,
    Thanks for your suggestion.
    By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
    the task).
    I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
    public string officeComments;
            public string officeDescription;
            private void TaskCOmplete(object sender, EventArgs e)
                CodeActivity Sender = (CodeActivity)sender;
                Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
                officeComments = ofctask1.Comments;
                officeDescription = ofctask1.Description;          
    Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
    Thank you

  • How to create RFQ s and use them to complete the program

    hi,
    how to create RFQ s and use them to complete the program
    thanks in advance

    Hi Santosh,
    RFQ is created through transaction ME41.
    You need to write down BDC for mass update of RFQ, because BAPI is not available.
    Regards,
    Tutun

  • External definition and used them as Data Type Templates

    hi all
    how to Develop external definition and used them as Data Type Templates .
    Thank u
    Swari

    HI
    External Definitions: If a definition of the message structure exists in wsdl, xsd, dtd formats, we can use it in the integration repository by importing it as an external definition.
    External Definations:
    An external definition enables you to import a local WSDL, XSD, or DTD file to the Integration Repository and specify which parts of the schema to extract as the description for a message. You can use these extracted message schema as:
    Output or input messages in message interfaces
    Source or target structures for message mappings
    There is a series of standard schema for describing the message structure at runtime. WSDL (Web Service Description Language), XSD (XML Schema Definition Language), or DTDs (Document Type Definitions) are often used to describe message schema. If a description of the message structure already exists in one of the above formats, you can use it in the Integration Repository by importing it as an external definition rather than re-entering it manually using the data type editor.
    Have a look at
    http://help.sap.com/saphelp_nw04/helpdata/en/43/ce49ef1019087ae10000000a1553f6/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
    cheers

  • Infopackage-Load Many Files from Application Server and later Archive/Move

    Hi All..
      I have a doubt,   I have a requirement of take many files to load into BI 7.0..  I used the infopackage before with option:
    Load Binary File From Application server
      I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
    *All of this files will be on one server that itu2019s map into AL11.. Like
    Infopfw
    BW_LOAD_20090120.txt
    BW_LOAD_20090125.txt
    BW_LOAD_OTHER_1.txt
    u2026.
    Etc..
    This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
    Could you help me with this questions:
    -     How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
    -     In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
    I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t  know how I can specify all the path..
    I try with:
    Infopfw
    InfopfwFile.csv
    Infopfw
    This is the abap code that automatically you see and you need to modifyu2026
    Create a routine for file name
    This routine will be called by the adapter,
    when the infopackage is executed.
              p_filename =
              p_subrc = 0.
    Thank you for your ideas or recommendations.
    Al

    Hi Reddy, thank you for your answer
    I have some doubuts.. when you explain me the option:
    All the above files are appending dates at the end of the file....
    You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
    I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
    About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
    ****Or
    Create two folders in your BW in Application server level, in AL11 (ask Basis team)
    I call it is F1 and F2 folders.
    First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
    Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
    To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
    so in this way it will work.You need to schedule the Ubix script in AL11.
    This is the way how to handle the application server...I'm using the same logic.
    Thank you soo much.
    Al

  • Reading values from JTextField and using them?

    Hello,
    I am trying to make a login screen to connect to an oracle database. Im pretty new to creaing GUI. I need help with reading the values from the JTextField and to be able to use them for my connection. So do I need to apply a listener? How do I go about doing that in this project. Thanks for any code or advice.
    import java.util.*;
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.table.*;
    import java.sql.*;
    public class UserDialog
        String databaseURL;
        String driver;
        String database;
        String username;
        String password;
        String hostname;
        String port;
        UserDialog() {
            getInfo();
        static String[] ConnectOptionNames = { "Login", "Cancel" };
        static String   ConnectTitle = "Login screen";
        public void getInfo() {
            JPanel      connectionPanel;
            JLabel     databaseURLLabel = new JLabel("Database URL:   ", JLabel.LEFT);
         JTextField databaseURLField = new JTextField("");
         JLabel     driverLabel = new JLabel("Driver:   ", JLabel.LEFT);
         JTextField driverField = new JTextField("");
            JLabel     databaseLabel = new JLabel("Database:   ", JLabel.LEFT);
         JTextField databaseField = new JTextField("");
            JLabel     usernameLabel = new JLabel("User Name:   ", JLabel.LEFT);
         JTextField usernameField = new JTextField("");
            JLabel     passwordLabel = new JLabel("Password:   ", JLabel.LEFT);
         JTextField passwordField = new JPasswordField("");
            JLabel     hostnameLabel = new JLabel("Host Name:   ", JLabel.LEFT);
         JTextField hostnameField = new JTextField("");
            JLabel     portLabel = new JLabel("Port:   ", JLabel.LEFT);
         JTextField portField = new JTextField("");
         connectionPanel = new JPanel(false);
         connectionPanel.setLayout(new BoxLayout(connectionPanel,
                                  BoxLayout.X_AXIS));
         JPanel namePanel = new JPanel(false);
         namePanel.setLayout(new GridLayout(0, 1));
         namePanel.add(databaseURLLabel);
         namePanel.add(driverLabel);
            namePanel.add(databaseLabel);
            namePanel.add(usernameLabel);
            namePanel.add(passwordLabel);
            namePanel.add(hostnameLabel);
            namePanel.add(portLabel);
         JPanel fieldPanel = new JPanel(false);
         fieldPanel.setLayout(new GridLayout(0, 1));
         fieldPanel.add(databaseURLField);
            fieldPanel.add(driverField);
            fieldPanel.add(databaseField);
            fieldPanel.add(usernameField);
         fieldPanel.add(passwordField);
            fieldPanel.add(hostnameField);
            fieldPanel.add(portField);
         connectionPanel.add(namePanel);
         connectionPanel.add(fieldPanel);
            // Connect or quit
            databaseURL = databaseURLField.getText();
            driver = driverField.getText();
            database = databaseField.getText();
            username = usernameField.getText();
            password = passwordField.getText();
            hostname = hostnameField.getText();
            port = portField.getText();
            int n = JOptionPane.showOptionDialog(null, connectionPanel,
                                            ConnectTitle,
                                            JOptionPane.OK_CANCEL_OPTION,
                                            JOptionPane.PLAIN_MESSAGE,
                                            null, ConnectOptionNames,
                                            ConnectOptionNames[0]);
            if (n == 0) {
                System.out.println("Attempting login: " + username);
                String url = databaseURL+hostname+":"+port+":"+database;
             // load the JDBC driver for Oracle
             try{
                   DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
                   Connection con =  DriverManager.getConnection (url, username, password);
                System.out.println("Congratulations! You are connected successfully.");
                con.close();
                System.out.println("Connection is closed successfully.");
             catch(SQLException e){
                System.out.println("Error: "+e);
            else if (n == 1)
                    System.exit(0);
        public static void main (String args []) {
             UserDialog ud = new UserDialog();
    }thanks again,
    James

    the reason why you can't get the text is because you are reading the value before some actually inserts anything in any fields.
    Here is what you need to do:
    Create a JDialog/JFrame. Create a JPanel and set that panel as contentPane (dialog.setContentPane(panel)). Insert all the components, ie JLabels and JTextFields. Add two buttons, Login and Cancel to the panel as well. Now get the username and password field values using getText() inside the ActionListener of the Login.
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class LoginDialog extends JDialog
    String username, password;
      public LoginDialog( ){
        setTitle( "Login" );
        JPanel content = new JPanel(new GridLayout(0, 2) ); // as many rows, but only 2 columns.
        content.add( new JLabel( "User Name" ) );
        final JTextField nameField = new JTextField( "" );
        content.add( nameField );
        content.add( new JLabel( "Password" ) );
        final JTextField passField = new JTextField( "" );
        content.add( passField );
        JButton login = new JButton( "Login" );
        login.addActionListener( new ActionListener(){
          public void actionPerformed( ActionEvent ae ){
            username = nameField.getText();
            password = passField.getText();
            // call a method or write the code to verify the username and login here...
        content.add( login );
        JButton cancel = new JButton( "Cancel" );
        cancel.addActionListener( new ActionListener( ){
          public void actionPerformed( ActionEvent ae ){
            dispose(); // close the window or write any code that you want here.
        content.add( cancel );
        pack( ); // pack everything in the dialog for display.
        show(); // show the dialog.

  • Loading multiple swf's in runtime and playing them one after other

    Hi,
    I am looking for help in loading multiple swf's as a playlist and playing them one after other on top of the other, so here even we have to play with display list for the visiblity.
    Tried to load single files but not getting for multiple files, what will be the event with which the dynamically loaded swf switch to other.These file names will be mentioned in XML file.
    Please let me know your thoughts and will be greatfull if anybody can help with the script or any kind of tutorials.

    Hi,
    First of all am thanking you for showing your kind intrest towards this thread, and appreciate for spending time to work out this issue.
    I will explain you in deatil the issue what am facing,I am working on a project where basically dealing with flv player and videos, am trying to play multiple flv videos of a 3d human character who is speaking out a number like 3550.
    Here we are using multiple video files and joining them like videos where character says 3 then 1000 then  5 then 50.
    The issue here is after every video there is a fraction of second where the character is disappearing from the stage which we can't afford because all the numbers have to be played at once to show it as one single digit.
    So thought of trying swf's instead of flv so that we can omit the gap between the numbers, but even in this swf's also having same issue for a fraction of second the character is missing from the stage.
    I am looking for a solution to this, either the way can work out as flv or swf.For flv am trying to edit some player where we can remove the delay between the clips.
    I am attaching new swf where the character is speaking 3 numbers like 3,1000,40.You can notice there is a flicker between the swf's.
    Can we use Display list with which we can omit that gap.
    Looking for your thoughts and help.
    Thank you

  • Get Javascript values and use them in a servlet?

    Hey
    I have a HTML which has Javascript scripts which I have to get values from (a array to be exact) and pass them to a servlet so I can process the information in a certain way. I cant seem to find a way to do this properly as the servlet is server side and Javascript is client side. How can I implement this?
    Using a quick example example I have
    C:/index.html
    C:/js/script.js
    Index.html contains:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <script type="text/javascript" src="js/script.js">
    </script>
    </head>
    <body>
    a href="javascript:void(0);" id="add"><img src="images/menunew.png" alt="plus" border="0" />
    /a>
    </body>
    </html>
    Script.js contains:
    var Script = Class.create({
    a:4,
    b:5,
    add: function(){       
    return (this.a + this.b);
    (Ignore syntaxis errors as this is a quick example I wrote up just to see if you can give me a practical example on how to read it.)
    How can from a Java servlet access a and b from the script.js file (which contains a class named Script) and also access the function add which returns that value?
    Thank you for the help
    Edited by: 902756 on 16-dic-2011 0:18

    DrClap wrote:
    902756 wrote:
    1: Yes, it seems like the logically answer but Im not too up on AJAX and even less on mixing it up with servlets. Do you mind giving me a simple add (function) sample or something similar?You are looking at it the wrong way. What you actually want to do is to have the browser send a request (which somehow contains that Javascript data) to a URL which causes the servlet to receive the data. There's no "mixing it up" going on there. The client and the server are entirely separate.
    And since that request would be an HTTP request, it's just text. There's no concept in HTTP of transmitting objects, whether they be Javascript objects or Java objects. Anything you want to transmit has to be converted into text by the sender and converted back into objects by the receiver.
    So there's no such thing as "a simple add function". You're going to have to stop thinking in that way and start thinking of client-server systems in the way they actually are.The thing is I want to start simple to grab a simple concept....
    Im trying a AJAX route and I have the following:
    /index.html
    /js/Adding.js
    Index contains:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
         <title></title>
         <script type="text/javascript" src="js/Adding.js"></script>
    </head>
    <body>
    <select name="num1">
    <option value="1">1</option>
    <option value="2">2</option>
    <option value="3">3</option>
    <option value="4">4</option>
    </select>
    <select name="num2">
    <option value="5">5</option>
    <option value="6">6</option>
    <option value="7">7</option>
    <option value="8">8</option>
    </select>
    <form method="get" name="adding">
    Do
    <span id="res"></span>
    </form>
    </body>
    </html>
    Adding.js contains
    var Adding = Class.create({
    x: null,
    y: null,
    add: function()
         var xmlHttp = new XMLHttpRequest();
         var value1 = document.getElementById("num1").value;
    var value2 = document.getElementById("num2").value;
         xmlHttp.open("GET", "index.html", false);
         xmlHttp.send(value1 + value2);
         var result = document.getElementById("res");
         result.innerHTML = xmlHttp.responseText;
    This shows 2 comboboxes full of numbers and link saying "Do" which calls the javascript function and adds the two numbers in the comboboxs and shows them on the screen without refreshing the page. This does not work and I would like this to work before I continue onto the bigger picture.

  • Creating page items from pl/sql procedure and using them on a page

    I have a page containing 2 select lists (P21_DEPARTMENTS and P21_DATE). Originally I added them as items that were "select list with submits". The problem is that based on the clearance level of the currently logged on user I only wanted the P21_DEPARTMENTS to be a select list if the user was an administrator. If however the user is not an admin then I want the page to have a hidden form field called P21_DEPARTMENTS that stores the user's department and has a label item that has the department name.
    There is also a report region that generates a table based on the department selected from the select list (if the user is an admin) or the value stored in the hidden form field if the user is not.
    My problem is that I cannot have both those items on the same page and use the HTML built-in authentication to determine which item should be rendered because I need to use the same ID for both items so that the stored procedure in my report region doesn't break. HTML does not permit items to share the same ID.
    I tried to circumvent the problem by creating a stored procedure that performs all of the item rendering in the procedure and uses "htp.p()" to output all of my HTML code. This solution would allow me to pass a parameter into the procedure informing me as to whether or not the user is an administrator. If the user is an administrator the procedure would use a conditional statement and render a select list. If not, the hidden form field and label option would be used instead.
    I finally got the stored procedure working perfectly. Now I am encountering the most bizarre thing. Since the "select list with submit" was not working (I used the same code that gets generated when I created other items using htmlDB's GUI) I decided to use a JavaScript function instead that gets triggered by the onChange event. I send along the value that is currently selected in the select list and in the function I set:
    location.href='http://www.myoraclesite.com/pls/htmldb/f?p=111:21:729740000000000000::NO::P21_DEPARTMENTS:1';
    In theory this should work. The problem is that it doesn't. The page reloads and the P21_DEPARTMENTS select list is not pre-selected.
    The only thing I can think of is that when htmlDB generates page items that you've created with it's own admin tool it assigns some internal guid or something as opposed to when someone tries to generate dynamic page items of their own from a pl/sql procedure it's like the application doesn't even know they exist.
    Any help would be GREATLY appreciated.
    My only other solution would be to create a totally separate page (one for admin and another for non-admin). I would really like to avoid this.
    Thanks in advance.

    I would love to be able to generate my menus and
    various other items in my htmlDB applications in much
    the same way I can using ASP, PHP and Cold Fusion.
    Users should have the ability to write server-side
    code wherever they feel like it. The way htmlDB works
    right now I spend more time trying to figure out how
    to create simple effects and generate simple
    interfaces when I need to be building a portal. Ami - it's important to understand that HTML DB is not like other languages. Thus, trying to force concepts which are common in other languages into HTML DB will often result in more work.
    It's definitely worth the time to go over the HTML DB 2-day Developer, which can be found here: http://www.oracle.com/technology/products/database/htmldb/pdf/B14377_01.pdf
    I can build a portal using Classic ASP, C#, PHP or Cold
    Fusion in like 1/10 of the time that it takes me to
    build one using htmlDB. I understand that this is not
    meant for the hard-core programmer but no web
    programming application in today's day and age should
    prevent experts from getting under the hood.And I can build a Portal in HTML DB in 1/10 the time it will take me to do it in any other language. It's like anything else - proficiency comes with practice and work.
    As for getting under the hood, there is plenty of places you can do that with HTML DB. Keep in mind that HTML DB itself is an HTML DB application, so the limits on what you can build with HTML DB are virtually limitless.
    Sorry for the vent there. After spending the last 2
    days trying to figure out how to implement such a
    straightforward thing and now being informed that it
    can't be done kind of bugged me.I understand your frustration, as I've been there before. My rule for beginners is that if you are writing more than a line or two of code in the first week, you're doing something wrong. Stop, take a break, and then use the ample resources (including searching this forum) to help solve your problem. There are plenty of resources available for you to learn about HTML DB on the HTML DB home page: http://otn.oracle.com/htmldb
    Good luck,
    - Scott -

  • CAN ONE HAVE THREE COPIES OF THE SAME DATABASE AND USE THEM ALTERNATLEY IN LIGHTROOM TO SEARCH FOR KEY WORDS, ETC?

    I have two back ups and a traveling copy of my work.  Each is 4 terabites and growing.  I want to apply keywords to he images in Lighroom, copy the new information to the other two drives which are backups and use any of the three in any of three computers.  The keywords are installed in all three computers, but how does the computer know it is a different hard drive without keying in all three hard drives.

    If each drive is set up exactly the same, with all image paths concurrent, you should be able to substitute the .lrcat with the newly keyworded info. into any one of them and that should bring in all info with a minimum of work. However, it does require diligence in keeping good track of which catalog is the "Master".

  • How to Declare Arrays in bpel and use them as acollection

    Hi,
    I Am new to Bpel, I had created an empty Bpel Process and configured file adapter to a directory, In my text file i have 3 records with four columns, each column seperated by ',' and each record seperated by "EOL(end of line)", Below is the xsd file generated by the native format xsd builder, taken a recieve activity to recieve the contents of file from file adapter.
    So all the data which is in the file will be there in recieve activity.
    FileContents
    55555,rgfdgsd,gfdgfdg,23
    66666,retretret,trtertg,21
    77777,rtrttreter,trtter,23
    My Question is
    I want to compare whether value of C1 = '55555' and if the value is equal to 55555 then that record with c1=55555 has to be inserted into database by using Arrays
    How to compare the value of c1 through bpel functions.
    with java i have to use the logic similar to this by using Xpath
    getElement by tagname(c1);- it will give all the elements with tagname c1, three records are there with tagname c1 (c1=55555,c1=66666,c1=77777), we have to iterate through the elemnts and check whether the value iof c1='55555' and get the whole parent block which contains values of c1,c2,c3,c4 and insert that to database
    What variables we have to use to get the Similar logic in bpel
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    targetNamespace="http://TargetNamespace.com/FileAdapter"
    xmlns:tns="http://TargetNamespace.com/FileAdapter"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD">
    <xsd:element name="Associates">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="Associate" minOccurs="1" maxOccurs="unbounded">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="C1" type="xsd:double" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="C4" type="xsd:double" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;">
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    I want to do it by using Arrays,
    Please post the step by step procedure like
    How to declare an Array?
    How to iterate the results in recieve acticity of file adapter and put them to array?
    How to compare the values in array with our desired value?
    Please Look into this and suggest me the solution.
    Regards

    I think it is a good option to use transformations. Do you have any critical reason why you want to do this using array?
    Little explanation below for your questions.
    As per my understanding from variable is the recieve activity variable and to variable is the Array variable is it right?
    Yes. Here I was try to build my array from the different source system data. This will append data to the array variable.
    How can we declare an array variable in bpel(to variable) with name as Variable_Array, part as payload and query as ArrayList?
    *Any element that can hold another element can be a array.
    For example if element A is declared as sequence of element B type, then A acts as a array for B*
    Could you please explain this also, what is from variable? and what is to variable?
    +<assign name="Assign_XPath_For_Array">+
    +<copy><from expression="concat('/ns1:ArrayList/ns2:ArrayElem') "/><to variable="Variable_Xpath"/></copy>+
    +</assign>+
    what is the type of to variable "Variable_Xpath"(String or int etc)?
    This creates a dynamic Xpath and store in some variable here. Here the variable is called Variable_Xpath which is a string
    similarly what is the type of to variable?
    +<assign name="Assign_Read_Array">+
    +<copy>+
    +<from expression="bpws:getVariableData('Variable_Array','payload',bpws:getVariableData('Variable_Xpath'))"/>+
    +<to variable="Variable_Read_Array_Element" query="/ns1: ABC"/>+
    +</copy>+
    +</assign>+
    To variable type is the variable that I read from the Array.
    *For example if A is the array holding B, then the to variable is B and from is doing A[counter]*
    Every Little Helps
    Kalidass Mookkaiah
    http://oraclebpelindepth.blogspot.com/

  • None of my apps on my creative cloud will let me download and use them

    none of my apps on my creative cloud will let me download and use them

    Dear Alison
    Please provide a note of the error message that you are receiving during download of apps. Have you recently updated your version of the Cloud app? Has anything else changed?

Maybe you are looking for

  • Open item problem

    Hello, an account have been created without 'Open item management' being checked.A posting has then been done.. Then, the account has been recreated with 'Open item management' checked.Program ZRFSEPA02 has then  been executed. It is now impossible t

  • How to change keepalive between active and secondary sup on 6500

    how can I change the default keep alive time between redundant sup modules.

  • CRM and BW?

    Hi Friend’s Integration between CRM and BW Regards, Mahesh Kumar [email protected]

  • Virtual PC suddenly unable to play sounds

    Hi everybody, Just recently, when I try to start up virtual PC I get a message that says virtual PC was not able to start up the mac audio system, and is therefore unable to play sounds. Up until then, sounds had always played just fine in virtual PC

  • UserExit for Production Order

    Hi, Can some give me an UserExit or a BTE which gets triggered whenever the status of the Production Order is changed? Please help me with this........... Thanks, Archana.