Loading ResourceBundles inside the nucleus created with ATGDust
Hi,
I'm trying to load nuclues using ATGDust using the startWithModules option.
I was testing a form handler and the testcase worked fine until i decided to move the string literals from the formhandler to a resource bundle file.
This resource bundle is placed inside resources.jar of the lib folder of the module. i.e, <ATG_ROOT>/<MAIN_MODULE>/<SUB_MODULE>/lib/resources.jar
Now nucleus is not able to instantiate the form handler because it cannot identify the resource bundle. I guess the resources.jar is not getting added to the classpath
What's the solution to this?
Regards,
Jagadeesh
If you are launching your tests from Eclipse then you can try adding your resources.jar to Eclipse classpath and see if it works.
Similar Messages
-
Make region/Task-Flow visible/invisible inside the page created in composer mode.
Environent_
JDeveloper 11.1.1.6.0
Webcenter Sites version : 11g R1.
Problem statement_
Below example is to demonstrate the usecase to make region visible/invisible inside the page created in composer mode.
The problem with this case is the 'Show Component' property does not automatically evaluate its expression even after using the contextual event.
We want the region to be refreshed at run-time just like it works with design time pages using Refresh, RefreshCondition attributes in pageDef.
My Usecase_
I have two task flows dragged in Webcenter Customized Page.
First contains Employee list and Second contains selected employee's manager name.
By default when page loads second task-flow/Dragged-Box should be hidden.
When I select employee from first box, then immediately second box should be appeared with manager name.
In the case when If Employee does not have manager, second box should be disappeared. Whole page should not be refreshed only the second box should be refreshed and hide.
Regards,
NirajHi Jiri,
Thanks for your prompt reply..
While referencing the taskflow in any page will create a region and makes entry in pageDef for that page.
In the PageDef of that page I am using Refresh and RefreshCondition attributes of the taskflow tag in order to refresh the taskflow based on certain condition or parameter change.
I want to achieve the same in run-time environment using composer mode. where I have the control over page but do not have pageDef (visually where I can go and add the attributes Refresh and RefreshCondition manually)
I would be obliged if someone can help on this.
Thanks
Regards,
Niraj -
Client wanted to delete the document created with the wrong GL with the WB
Dear All,
The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
We have tried to reverse it through a reversal posting. But it could not be done.
Client wanted to delete the document created with the wrong GL with the WBS element.
How this can be set right?
Please advice.
Regards
Bijudasdocument cannot be deleted in SAP
reverse the document and then report -
Client wanted to delete the document created with the wrong GL with the WBS
Dear All,
The user had by mistake posted the the document in a wrong GL with with WBS element under the Project.
We have tried to reverse it through a reversal posting. But it could not be done.
Client wanted to delete the document created with the wrong GL with the WBS element.
How this can be set right?
Please advice.
Regardsdocument cannot be deleted in SAP
reverse the document and then report -
Reg: PO release notification needs to send to the PR Creater with PO num
HI Gurus,
Iam new to workfow. I have one senario in workflow.
Requirement: when ever PO release notification needs to send to the PR Creater with PO number and corresponding PR number.
Please guide how to do this .
My questions :
1.How can we can get the PR Creater user id to send notification mail
Thanks & Regards
RameshHi Ramesh ,
Which workflow you are using for PO . If it is the standard one , there is a rule used in the worklfow called 20000027.
In this there is an USer exit . In this exit , you can write your code for sending the workitem to the PR creator.
If you are using a custom workflow for this , then create a new rule and in that write the code for fetching the PR Creator and assign the user ro the actor tab. Incluse this rule in ur task .
This will solve your problem. -
Trial version problem with the wrie Create with the trial version
help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail versionPublication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?
-
Would like to re-create the webpages created with iWeb to iCloud and post
Would like to re-create the webpages created with iWeb to iCloud and post to the internet
Unfortunately, iCloud does not support the hosting of webpages. You will need to find a 3rd party web host in order to publish your web sites.
Depending on the version of iWeb you are using you have a couple of publishing options:
iWeb '09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like "www.YourDomain.com/sitename/Home.html )
iWeb '08 you can publish your website to a local folder. Then upload to your host with an FTP application like CyberDuck
I have been using IX Webhosting for several years with little to no problems "usually the problem was something I did" and they have been quick to solve any issue I have come across. The have plans that start at $3.95 a mo (USD) and their customer service is top notch.
http://jeffnitschke.com/IXWebHosting.html
http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
"I may receive some form of compensation from my recommendation or link." -
I downloaded and installed the trial version of Adobe After Effects 6.0 last night and worked on a project for quite some time. This morning, when I tried to open the project, it gave me: After Effects Error: this file was created with a newer version of After Effects [3.0 (unknown)] -- time to upgrade your application.
The message is annoying. This means that if anyone send me an After Effects File from future versions, I cannot load them. Even Microsoft has converters for backwards compatibility
It is costing me time to evaluate the product, and lowering my opinion of it since it obviously has bugsAh, I see. So you are using 6.0, not CS6? Yes, in that case things are just as they are - AE is not forward compatible. Only CS5.5 and CS6 allow to save one version back (that is CS5 and CS5.5, respectively), but beyond that AE never offered this feature. anyway, AE 6.0 is hopelessly outdated. It doesn't even work on contemporary operating systems nor does it work properly with current versions of Quicktime and just the same it doesn't support any modern media formats, so that's like trying to fly to the moon with a WW I. airplane... and to make matters worse - AE 6.0 was one of the most bug-ridden versions of the program in the first place.
Mylenium -
Retreiving the content created with the Note Tool via Javascript??
Hey guys, is it possible to retrieve the text content created with the Note Tool from the tool palette in a photoshop document via Javascript? Basically, I wanted to store some text inside the Photoshop psd document, and then later on I can use scripting to access the content to be use as variables.
I have search the Javascript scripting reference pdf and the forum here, and I can't find any info the Note Tool. Much appreciated.Ok, so I am using the activeDocument.info.keywords property to store my text content. The content is basically a chunk of text that contains some parameters that the user can modify to save out a document. In my script, I am using a variable to store the content from the info.keywords property. But my next hurdle is how can I extract specific part of that variable into other variables, like storing the C:\projects\Textures\ into another variable? I've done some research and got a sense that the "match" method in javascript along with the use of regular expressions might do the job. But I am stuck. Any suggestions?
info.keywords property has the follow chunk of text:
// file path to save
path(C:\projects\Textures\)
// save file format (psd or tga, etc)
format (tga)
// include a single alpha channel with the file y/n
alpha(n)
// alpha name - default should be "alpha1"
alphaName(alpha1)
// scale from the original size
scale(.5)
//sharpening
sharpen(.5)
script code:
var saveDoc = activeDocument.info.keywords;
var savePath = saveDoc[0].match(regular expression goes here); // how to grab C:\projects\Textures\ from the saveDoc variable???
alert(savePath); -
How to know the PO Created with RFQ or Not..??
Hi MM Gurus,
How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.ReddyHi Pradeep. Thanks for the mail.
the problem is ....with *quotation...*
How to know the purchase order created with one quotation or not.
because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
so how to knows once PO cretd with Quotation or not. .
and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy -
Populate Depreciation areas to the assets created with no depreciation area
Hi,
We created few Assets under a particular asset class. But only after creating we realised that there were no depreciation areas in it. So I added the depreciation areas to this asset class and then run
AFBN to populate the newly created depreciation areas to the existing assets.But it is not working. Could you please help me to populate these depreciation areas to those existing assets. Is it possible or not?
Please note, the depreciation area tab is completely blank. When I try AFBN for Depr area 01 (Derived Depr area), the system throws a message "Define depreciation area correctly".
I also tried AFBN with "Leave values initial" indicator checked. But still no results.
Do any one of you know how to populate the depr areas to those assets? The User have already created 45-50 assets. If there is no solution, then the last resort is to delete these assets.
Thanks & Regards,
VinodHi Vinod,
AFBN is a simple tool, which copies entries from a source area to a target area. If you have no areas at all defined in the asset master record, there is no source to be copied.
I would propose to delete these assets with AS06 if possible and start over in this asset class. As I understand your description you can not have any posting to such assets up to now.
Regards,
Markus -
Why the metadata created with EM can't be found in JDeveloper
I created some dimensions and measures. then put them in a cube.And I created a measure folder and added the measures .
I do all the task with EM. And when I use JDeveloper to build a crosstable, only the demo measures and dimensions are in the available box . None of mine was there!
Any one can tell me if there any thing necessary I haven't done ?You need to do 2 things:
- make sure you've applied the 9.2.0.4.1 Oracle patch
- run the cwm2_olap_metadata_refresh.mr_refresh stored proc. Make sure you're connected as OLAPSYS. You need to run this after any OLAP metadata change.
Here's a few other forum posts that deal with the same issue:
Re: JDeveloper does not show my OLAP metadata
Re: How to define appropriate OLAP metadata?
Regards,
s.l. -
How to create table field inside the dynamically created table?
Hi, All!
I have created dynamic internal table (using field catalog and CALL METHOD cl_alv_table_create=>create_dynamic_table )
and put this table into FM REUSE_ALV_GRID_DISPLAY. ALV grid work. Now I need to color rows of my ALV, therefore I have to insert new column with name "COLORS" and type lvc_t_scol. I see three ways to do it , but all ones are unsuccessful:
1. Insert column into field catalog. FM REUSE_ALV_FIELDCATALOG_MERGE does not return info about "COLORS" I guess because COLORS is a table.
2. Insert column into field catalog manually. It provides a short dump during dynamic table creating or during call of REUSE_ALV_GRID_DISPLAY.
3. Create dyn table first, then add new field . I could not find a way how to do it :(((((((
Can somebody help me?
TatianaHi,
Here is the solution for this problem, Sample code:
*& Report ZCHA_ALV_GRID_CELL_COLOR *
REPORT ZCHA_ALV_GRID_CELL_COLOR .
TABLES:MARA.
DATA: W_CONTAINER TYPE SCRFNAME VALUE 'ALV_CONTAINER',
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
W_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
W_EVENT_RECEIVER TYPE REF TO LCL_EVENT_RECEIVER.
*layout
DATA: WA_LAYOUT TYPE LVC_S_LAYO.
*field catalog
DATA: IT_FIELDCAT_WRT_OFF TYPE LVC_T_FCAT,
WA_FIELDCAT_WRT_OFF TYPE LVC_S_FCAT.
DATA:BEGIN OF IT_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
MAKTX LIKE MAKT-MAKTX,
CELLCOLORS TYPE LVC_T_SCOL,
END OF IT_MARA.
SELECT P~MATNR
Q~MAKTX
INTO CORRESPONDING FIELDS OF TABLE IT_MARA
FROM MARA AS P INNER JOIN
MAKT AS Q ON
PMATNR = QMATNR.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'xxx'.
IF NOT W_CONTAINER IS INITIAL.
CREATE OBJECT W_CUSTOM_CONTAINER
EXPORTING CONTAINER_NAME = W_CONTAINER.
CREATE OBJECT W_GRID
EXPORTING I_PARENT = W_CUSTOM_CONTAINER.
ENDIF.
CLEAR IT_FIELDCAT_WRT_OFF.
REFRESH IT_FIELDCAT_WRT_OFF.
WA_FIELDCAT_WRT_OFF-FIELDNAME = 'MATNR'.
WA_FIELDCAT_WRT_OFF-COL_POS = '1'.
WA_FIELDCAT_WRT_OFF-OUTPUTLEN = '35'.
WA_FIELDCAT_WRT_OFF-SCRTEXT_L = 'Material No'.
APPEND WA_FIELDCAT_WRT_OFF TO IT_FIELDCAT_WRT_OFF.
CLEAR WA_FIELDCAT_WRT_OFF.
WA_FIELDCAT_WRT_OFF-FIELDNAME = 'MAKTX'.
WA_FIELDCAT_WRT_OFF-COL_POS = '2'.
WA_FIELDCAT_WRT_OFF-OUTPUTLEN = '45'.
WA_FIELDCAT_WRT_OFF-SCRTEXT_L = 'Material Desc'.
APPEND WA_FIELDCAT_WRT_OFF TO IT_FIELDCAT_WRT_OFF.
CLEAR WA_FIELDCAT_WRT_OFF.
DATA LS_CELLCOLOR TYPE LVC_S_SCOL.
READ TABLE IT_MARA INDEX 5 .
LS_CELLCOLOR-FNAME = 'MATNR'.
LS_CELLCOLOR-COLOR-COL = '3'.
LS_CELLCOLOR-COLOR-INT = '1'.
APPEND LS_CELLCOLOR TO IT_MARA-CELLCOLORS.
MODIFY IT_MARA INDEX 5.
WA_LAYOUT-CTAB_FNAME = 'CELLCOLORS'.
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = WA_LAYOUT
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT_WRT_OFF
IT_OUTTAB = IT_MARA[].
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Try to assign appropriate points.
Regards,
Suman -
Loading images inside the package structure
i am having trouble loading images that are imbedded into the package structure. I am assuming this is possible(99.9% sure)
the classes are
cardgameframework/CardGame.class
cardgameframework/cardsupport/Card.class
cardgameframework/cardsupport/images/2D.GIF
cardgameframework/cardsupport/images/2C.GIF
how do i load 2D.gif and 2C.gif from CardGame
i tried
Image i = Toolkit.getDefaultToolkit.getImage(
"/cardgameframe/cardsupport/images/2C.GIF");
and
Image i = Toolkit.getDefaultToolkit.getImage(getClass().getResource(
"/cardgameframe/cardsupport/images/2C.GIF"));
but neither of these seem 2 work
any help would be appreciatedMy initial thought is that you've got the package wrong in your two examples - you've got cardgameframe and not cardgameframework.
Anyway, I tend to use the latter of your approaches - getClass().getResource("/cardgameframework/cardsupport/images/2D.GIF").
Be careful of case in your URLs.
Note that if getResource can't find your file it will return null - ensure that you're getting back a non-null URL:
URL url = getClass().getResource("/cardgameframework/cardsupport/images/2D.GIF");
System.out.println("URL: " + url);
...If your URL is non-null then the problem will be with the format of your image file (if it is null then you'll get a NullPointerException eventually).
Hope this helps. -
Should I make a back up of the website folder on iDisk? Is this folder the same as the Domain.sites2 folder in the Library?
Is it the same as the folder that's created when I click Publish to Folder in iWeb? It's so confusing - from where should I save, copy, or backup
my website? Thanks for clearing this up.The folder on iDisk is the published files - the Domain.sites2 has the unpublished data.
The published files on the iDisk aren't much use to you since you need to republish your site to a new server directly from iWeb or via a local folder and FTP.
Publishing....
http://www.iwebformusicians.com/iWeb/Publish-Website.html
Hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
Maybe you are looking for
-
Help to do Clean install OSX Mavericks
I am using osx Mavericks now by upgrading from osx Mountain Lion, I am not feeling better after upgrading, so decided to clean install Mavericks on my Macbook Pro13' 2012 model.Can anyone please assist me to do clean install osx with directions means
-
I use a Flexislider for my website [url removed] I want to use flash and make my website attractive. Any suggestions?
-
After Upgrade to Yosemite, Finder and other apps didn't work!
I have Yosemite installed, i think so, overtime i restart or reboot begins again the installation process, when i log in, finder doesn't open and safari crashes, it *****!
-
Printer won't work with Yosemite
kodak printer will not work with Yosemite. It was fine before. Anyone have the same problem with a Kodak printer. Weirdly I can scan a document but not print anything at all. It says printing but nothing comes out!
-
New Captivate 5.0 User - Powerpoint Question
I have a Powerpoint 2003 presentation that I have been asked make into a Captivate 5.0 presentation for posting on a website. Normally I talk throughout the presentation and click to advance the slides and make animation objects appear and disappear