Loading

Hi ,
Need to load 2 newly added field in DSO and then in cube (fields where added in extractor),need to run just transactional load or need to load master data first

Hi
Have you also added those new fields to DSO and cubes??
if no please add them there and update respective transformations as well.
if yes its always good idea to load master data first and then transaction data.
specially before loading to cube or to DSO with SIds activated.
Hope this helps
Regards
Sudeep

Similar Messages

Open project cancelled or unable to load database...

I have been running version 9 sucessfully and moving projects around with no errors. Today, I cannot load any of my projects.
I have been through the threads and deleted the .cpj, moved the project to the root of my hard drive, etc.
Something else is going on.
I did see some information on files being blocked by the virus scanner. I'll pursue that with my help desk.
Any other ideas would be appreciated.
Thanks!

The only file that is MS Access based is the CPD file and it does not matter which version of Access you have on your machine, indeed you don't have to have Access installed.
If you have the same problems with the supplied sample projects, then maybe something has gone wrong with your installation of RoboHelp. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

OBIEE Pre-Builts Loading one year at a time

Hi,
We are in a situation where we need to load one year at a time into the BAW (warehouse). I have seen this done before where the initial load was a full load and only went forward one year. Each subsequent load was for a complete year until we were current. After that, it was simply incremental loads with the standard prune days of 30.
Does anyone have any detail as to how to do this?
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

Adobe cloud tries to load addon which I have deleted in Extension manager

when Adobe Cloud starts it tries to load an application (Edge FX lite) that I have deleted in Adobe Extension Manager cc. I get the error message ' unable to install the addon EdgeFX lite error 603. How do I stop this?
Also in Adobe Exchange in 'My Stuff' there are showing addons which I have removed in Adobe extension Manager cc which I would like to be removed from this listing as I will never use them, but if I right click to uninstall I fail to get rid of them.

Apologies, without making the assumption that you are signed in
1) Go to https://creative.adobe.com/addons/
2) In the top right hand corner select sign in and enter your Adobe ID and password
3) Once logged in, on the center of the screen at the left hand side, select the link 'All your purchases and shared items'
4) You will then be taken to a page that is the equivalent of your My Stuff panel.
5) You can then install individual add-ons/extensions.
Kind regards,
Lea

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Load Times

I am installing Adobe Creative Cloud enterprise in a virtual lab environment. This lab basically reverts back to a pre-defined state during reboot - all user profiles are deleted. When a user logs in and starts Photoshop for the first time, it takes up to 30 seconds to load. If the user opens photoshop again while still logged in, it opens in about 2 seconds. How can I speed photoshop up so it loads quickly the first time when a user launches it? Are there settings in the user profile that I can copy to other users? Is there something I can disable on the first load? etc. I tried copying some of the profile settings to the default profile, but that only reduces the launch time to about 10 seconds. InDesign is another example. Using Windows 7 x64, 8GB RAM machines. No other special software installed except office 2013. Thanks.

Probably nothing you can do. It's likely not PS itself, its the licensing stuff and the updaters, which naturally will have a hard time in a VM that prevents them from accessing certain things. Or in short: You are forcing them into quirks mode and it may take forever until they have established their port connections after a million failed attempts.
Mylenium

Loading error

Hi,
I'm trying to load data it is given an error,
WRT_8025 Error in BW Target. [Number of fields in Target do not Match
Repository fields = 15 BW fields = 18]
WRITER_1_*_1> Wed Oct 19 15:07:55 2007
WRITER_1_*_1> WRT_8025 Error in BW Target. [===> Compare Targets for InfoSource Failed.
SAP system exception raised.
key = RFC_ERROR_SYSTEM_FAILURE
message = See RFC trace file or SAP system log for more details
Please help me to find out the problem.
Thanks,

rob,
could you give the BW version also and what data you are trying to load and where ?
Ideally try replicating the datasource once again... and check your source system connection.
Arun

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Data loading

Requirement is that enhanced the extractor by adding fields mapped the fields in bw in DSO,added in dimension in cube and also mapped in multiprovider ,on multiprovider report is build.
Now for testing need to reflect the data in report.
How can it achieve ,need to load the data from infoobjects DSO to cube is it the right approach.
Please suggest how to achieve it starting from loading infoobject then to DSO and then to cube and finally to reflect the data in report.

Hi there,
I guess you've said it all.
You enhance a datasource with new fields, and you've also added those new fields in the DSO and also mapped from the datasource to the DSO these new fields. You've also add the fields in the cube and mapp the fields from the DSO to the cube. You've also add the fileds in the MultiProvider and have identified the fields there. You've also changed the query with the new fields
So for loading the data, you should load the attributes and/or texts for the new InfoObjects first.
After that activate the master data for those new fields.
After that load the data from the datasource to the DSO and activate the DSO
After that load the data from the DSO to the InfoCube and after that you can check the report with the contents of this new data (with the new fields).
Hope this helps,
Regards,
Diogo.

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

When i login to a website, it loads then gives me a blank page ?

I can view a page regularly, like everything is normal until i go to log in. I get a blank page as soon as the page loads, and this happens to many websites. Ive tried searching in safemode, editing my firewall settings, removing cookies, disabling plug-ins, clearing history/cache, but i've had no luck so far. Anyone have any solutions ?
I notice that every page i load includes ".php" in the URL bar.
Thanks in advance

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Loading sound clips in my swing application

I have searched all the forums, din't find what i want.
I have many small sound files to be played in my application. Even on mouse Pressed, Drage etc etc....
Now I was looking for a better way of Loading the Sound files in memory as the application starts.....
If I use the Clip Interface of javax.sound and initilize them and open a stream, invoke the open() method, and store it in hashmap. So that when ever i need that file i will lookup for that clip and trigger the start() method which actually plays the sound. IS the approach the right approach, will not the Cip object keep the IO handle open, I have nearly 40 Clips to be loaded.
Can any one suggest me the better way of implementing this.
TIA
Zoha

As far as I know,there is no facility for detecting mouse scrolling wheel in JDK 1.3.
Check it in the later releases of JDK.

It doesn't open new tabs or windows when I click on then. it gives a problem loading page quite a bit, what's wrong?

When i open it it takes a long time to open, when I go to mail, or other places. it opens a Server not found
Firefox can't find the server at us.mg5.mail.yahoo.com
Check the address for typing errors such as
ww.example.com instead of
www.example.com
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
All this when I click on a button or do a search in Fire Fox.
It seems like I have to play with it to open anything.
I went back to the normal Fire Fox and it's still happening.
I sometimes have to restart my computer to get the buttons in the mail to show up or Face Book to work right.

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

Internet Problem - One site will load, another won't. Then mintues later, the site that previously would load won't and the one that wouldn't will. I'm also pulling up a lot of pages in all text. Pics won't load or only one will load and the rest won't...

Several weeks ago, I began to have some very strange internet connection issues. All the lights on my modem stay on and my computer shows full wi-fi signal, but I suddenly I won't be able to load any pages. Other times, I'll be able to load pages from one site, but not another. It's not the same sites all the time though.... sometimes I'll be able to load pages from one site and not another, and then 5 minutes later it'll switch and I'll be able to load pages from the site I previously couldn't and I won't be able to load pages from the site I previously could. A lot of pages are coming up just text with no pics... and then 5 mintues later that site will load normally and another site will come up just text. It does the same thing whether I'm connecting wirelessly or via an ethernet cable. It also doesn't matter which browser I use (I've tried Safari, Chrome, and Firefox). Although, once in a while when using chrome, I get a DNS error page instead of the usual 'cannot find server'. I contacted my service provider and I'm not losing speed or dropping packets. According to them, the problem I'm having is very strange since diagnostic tests show no problems at all. Perhaps someone has run into this before and has a suggestion?

Then if you have tried all the browsers try connecting the system to yoour router with an Ethernet cable and turn WiFi off. If you have the same problem then it more then likely after your computer, Router or modem or connection from your ISP.
If you get good browsing with the Ethernet cable then it is either the WiFi card in your Mac or the WiFi system in your router.

How can I get my Mac to load past the start-up screen?

My MacBook Pro (17" Mid-2009 model) that originally came with Snow Leopoard was acting up recently. Currently, it was running OS X Yosemite. I had been using the computer and then left it in sleep mode for two days while I was away. When I came back, the computer was turned off. At first, I thought it had simply run out of battery power but a quick press of the battery-level button on the side showed it had around 80% of battery left. I did not turn it off before I left, so I assumed another person had turned it off for me.
I proceeded to turn on the computer, but it started to make a faint, but abnormal noise. It was not coming from the disk drive, more on the lower left corner of the computer. It was repeating every few seconds. It then completed start up and I was presented with the log-in screen. The normal icons for each profile showed, but the icons for the menu bar at the top and the "sleep", "restart", and "shut down" along with other normal computer icons were completely weird. The closest I could describe them as was a more pixelated version of the infamous "missingno" from early Pokemon games: garbled pictures of once-normal icons.
The the comouter was acting much slower than usual, but I was able to click on my profile to enter my password. The animations were sluggish and distorted. It didnt even show that I had entered any characters, but I knew it was attempting to log in because the placement of icons were arranged to where they would be in a login. After a few minutes, I tried to shut the computer down by pressing the on-screen power button, but to no success. I forced the comouter off by holding the power button on my Mac, where is sputtered down with a flash of the screen.
I waited a few minutes, and completed a NVRAM restart. The sound came on along with the screen, but the loading bar would get to only 1/3 of the way before sitting for 3 minutes then dissapearing as the computer shut off. I attempted to restart several times, all met with the same failure. At this point, I had tried a few things suggested on websites such as entering single-user mode and entering "fsck -fy". I was unable to enter safe mode or disk utility.
Then like magic the computer actually completed start up and I was able to log in. Unfortuantely, I was only on for about 10 minutes before the comouter shut down yet again. Through the next few hours, I was desperately trying to restart the computer, only being able to enter disk utility once. The disk utility said there was nothing wrong with "Macintosh HD" when I "Verify Disk"-ed but that something else was wrong when I clicked on "Repair Disk". (I don't even know if this is even the right kind of thing to do in this type of problem, but I tried it anyway.)
So, I have tried different things like removing my external mouse and re-installing OS X (Which I could not do because it only gave me the option of selecting "Recovery Drive" because the normal "Macintosh HD" did not appear). But nothing has worked so far. From what I have seen, this also doesn't look like an issue with a graphics or video card because the screen is no longer glitchy (I read a discussion about failing NVidia cards causing a lawsuit and free replacements but they were a few years before my Mac was purchased) but I do not know what a problem with a logic board would look like, nor a failing hard drive. From what this looks like, I think I am going to have to fork over hundreds of dollars at the Apple Store just to fix something that is wrong. Hopefully, I won't lose any data.
Here is more information about my computer:

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

Loading

Similar Messages

Maybe you are looking for