Loadjava.bat not available in installation of Oracle Client 11gR2

I installed Oracle Client 11gR2 on Windows 7. I am trying to load java classes into Oracle database, remotely, to be used as procedures using TOAD. TOAD depends on the Oracle Client to do this. However, loadjava.bat is not installed in Client installation. There may be other files needed as well. As a consequence, this loading of Java classes is not happening.
What do I need to do to make this work?
I realize that there is the option of loading these Java classes directly from the server that hosts Oracle Database, but I'd like to do it from a remote client.
Thanks

user5370695 wrote:
I installed Oracle Client 11gR2 on Windows 7. I am trying to load java classes into Oracle database, remotely, to be used as procedures using TOAD. TOAD depends on the Oracle Client to do this. However, loadjava.bat is not installed in Client installation. There may be other files needed as well. As a consequence, this loading of Java classes is not happening.
What do I need to do to make this work?
I realize that there is the option of loading these Java classes directly from the server that hosts Oracle Database, but I'd like to do it from a remote client.
Thankswhich Edition of Windows 7?
one possible solution would be to install Oracle XE on your system.

Similar Messages

  • Is the Runtime installation of Oracle Client 10.2.0.4 supported with Busine

    Hi all,
    I have a some queries.
    1. Is the Runtime installation of Oracle Client 10.2.0.4 supported with BusinessObjects XI 3.1?
    2. Is the Administration installation of Oracle Client 10.2.0.4 supported with BusinessObjects XI 3.1?
    3. Does BusinessObjects XI 3.1 use Oracle .NET?  I'm asking this because the Runtime installation doesn't install Oracle .NET.
    4. Is there any functionality that is lost from BusinessObjects XI 3.1 if the Runtime installation of Oracle Client 10.2.0.4?
    Regards
    Kultar P

    Hi Kultar,
    I do not have any problem with an Oracle Installation and BO XI 3.0. I have a virtual machine which has oracle database 10.2.0.1 and BO XI 3.0.
    The CMS repository resides in the Oracle DB. From My Experience I do not have any problem with the two installations in the same machine.
    Regards
    Ishaq

  • Could not browse pages from IIS after re-installation of Oracle client

    Hi all,
    Unfortunately, I hit a issue today in the morning. I could not browse pages from IIS after I re-installed my oracle client on my machine. Below is the error massage from browser.
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: Could not load file or assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error:
    Line 174: <healthMonitoring>
    Line 175: <providers>
    Line 176: <add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
    Line 177: </providers>
    Line 178: </healthMonitoring>
    Source File: c:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\Config\machine.config Line: 176
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    When I comment a line for OracleWebEventProvider in health monitoring providers in machine.config, it works fine for me. But, Im wondering what went wrong during re-installation and how do I rectify this issue with out a temporary workaround.
    Please let me know your suggestions in this regards and thanks for the help in advance.
    Regards,
    Kumar

    After I ran the "uninstaller" on the Oracle CD .. there were services still in existance, however, once I deleted the c:/Oracle folder, they were gone. I also re-booted the pc and double-checked, before I tried re-installing.
    Thanks !
    Tammy
    Hi,
    look into services, is there any services is still exist or running with the same name.
    or give any other SID which you have given previously.
    Yogi
    [email protected]

  • Business content 3.30: Datasources not available for installation

    Hello,
    we have recently upgraded our business content from 3.10 to 3.30 in order to get new business content (e.g. datasource 2LIS_13_VDKON - billing item pricing conditions).
    Although the upgrade was successful, the new datasources cannot be found in the Administration Workbench/ Business Content in order to install them.
    Is there something more we should be doing after the upgrade, in order to be able to see the new Business content as available for installation?
    Thanks in advance,
    Pavlos

    Palvos,
    You can not find the datasources in Admin workbench. Datasources can be found in R/3.
    Login to your R/3 system. Go to RSA5. Expand all. Search for your datasource. Click on "Transfer Datasources" icon on tha tab. This installs your datasources on R/3 system.
    Once the installation is complete, login to BW, go to RSA1, "Source Systems" tab, select your source system and 'replicate datasource' by right clicking on it.
    You can install corresponding Infosource from "business content" tab in BW.
    Hope it solves your problem
    Gova

  • Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit

    Hi,
    I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
    While installing the client, the installer fails while configuring the Net CA with error:
    INFO: Done parsing command line arguments.
    INFO: Oracle Net Services Configuration:
    INFO: #
    INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
    INFO: #
    INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
    INFO: #
    INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
    INFO: # Problematic frame:
    INFO: # C [libnnz11.so+0x3c498]
    INFO: #
    INFO: # An error report file with more information is saved as hs_err_pid27377.log
    INFO: #
    INFO: # If you would like to submit a bug report, please visit:
    INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
    INFO: #
    WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
    t.ca.NetCA $*
    WARNING:
    INFO:
    INFO: Completed Plugin named: Oracle Net Configuration Assistant
    INFO: Oracle Net Configuration Assistant failed.
    INFO: Oracle Net Configuration Assistant failed.
    Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
    Please let me know how to resolve NetCA installation and the sqplus issue.
    Thanks & regards,
    Vinay

    Hi,
    Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
    But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
    export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
    export JAVA_HOME=$ORACLE_HOME/jdk
    export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
    export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
    export TNS_ADMIN=$ORACLE_HOME/network/admin
    export TWO_TASK=mmcoedb
    I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
    Please let me know how to resolve the error.
    Best regards,
    Vinay

  • How to uninstall oracle components silents using oracle universal installer in oracle client 11.2.0.3.0?

    Hi,
    I have installed oracle client 11.2.0.3.0 silently using the response file with INSTALL type as runtime. I want to remove  'Oracle sql developer' from the installed products. Using Oracle Universal Installer I am able to remove this component in GUI. Please provide me the silent switch to remove this component. I have tried with DEINSTALL_LIST property , but I am getting an error that 'no products selected for deinstall'. Please suggest on this.

    Pl post your OS details
    AFAIK, SQL Developer is not included in the Oracle Client install - it is a separate install. You will have to follow the instructions for uninstalling SQL Developer - check the docs for your specific version of SQLD - Oracle SQL Developer
    e.g. for 3.1, see Installing Oracle SQL Developer

  • Installation of Oracle Client 32 bit on Windows 64 bit

    Hi ,
    I'm trying to install the 32 bit Oracle client (release 11.2.0) on a Windows server with 64 bit (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).
    It's my understanding that this is supported and should work. However, the 64 bit Oracle client (release 11.2.0) is already installed on the server.
    We need the 32 bit client since an older application requires this.
    The GUI for the install of the client starts fine - but when the step "Finish installation" the GUI suddenly disappeares. The logfile of the installation ends
    with
    INFO: Setting the value  for INSTALL_TYPE variable
    INFO: Variable "INSTALL_TYPE" wird auf "InstantClient" festgelegt. Der Wert wurde von der Befehlszeile empfangen.
    INFO: adding the variable oracle_install_NoMigration to command line args table
    INFO: adding the variable oracle_install_RACInstall to command line args table
    INFO: adding the variable oracle_install_WindowsSystemDirectory to command line args table
    INFO: Update the State machine to STATE_INIT_SESSION
    INFO: Creating & Initializing the Session Interface Manager
    INFO: Calling OiicInstallAPISession's prepareForInstallOperations
    INFO: Do the iterator execution till Summary
    INFO: Initialisieren des Installationsbestands
    INFO: Einrichten des Installationsbestands
    I'm executing the installation as a local admin - I've tried the installation with setting the compatibility mode to Windows 2000. No success at all :-(
    Did I get it wrong that ths 32 bit client is certified with this windows version? Does anybody have experience with the same situation?
    Any help will be appreciated!
    Rgds
    Jan

    Are you using separate ORACLE_BASE directories ?
    Oracle&amp;reg; Database
    HTH
    Srini

  • Uninstall Oracle client 11gR2

    We need to install oracle client on a windows 2008 64 bits server.
    Because for some of our miscrosoft integration service SSIS packages we have to run 32 bits.
    SO I installed Oracle client 11g R2 32 bits for windows on the server.
    I found some components are not installed, so I need to uninstall the client and reinstall it.
    But by using universal installer, when clicking deinstall it says to run command ... to unintall it. Why...
    Then in the directory of deinstall, I double click the deinstall.bat, it runs quickly and I didn't see oracle client is uninstalled.
    Then following the instruction on the http://heliosguneserol.wordpress.com/2010/10/27/how-to-remove-oracle-11gr2-on-windows-7, it is windows 7, but I think it is the same.
    I download the utility, and run the command, when I run this:
    D:\win32_11gR2_deinstall\deinstall>set ORACLE_HOME=D:\Oracle11g\product\11.2.0\client_1
    D:\win32_11gR2_deinstall\deinstall>deinstall -home D:\Oracle11g\product\11.2.0\client_1
    The system cannot find the path specified.
    But the path is there in windows direcotry,
    what I am doing wrong?
    How come 11g client is so hard to uninstall, but 10 g is so easy?
    More information may help to trouble shoot:
    Prior I download the the standalone version of deinstall , I tried the deinstall tool with the origianal oracle installation.
    it gives error when I run the destinall,
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Windows\system32>d:
    D:\>cd Oracle11g\product\11.2.0\client_1\deinstall
    D:\Oracle11g\product\11.2.0\client_1\deinstall>
    D:\Oracle11g\product\11.2.0\client_1\deinstall>deinstall.bat
    Checking for required files and bootstrapping ...
    Please wait ...
    ERROR: Cannot find the file jlib\emca.jar in the ORACLE_HOME D:\Oracle11g\produc
    t\11.2.0\client_1. You must download the standalone version of the deinstall to
    ol from OTN to deconfigure/deinstall this Oracle Home.
    cannot remove directory for C:\Users\xicao\AppData\Local\Temp\OraDeinstall2012-0
    3-13_15-19-35: Permission denied at D:\Oracle11g\product\11.2.0\client_1\deinsta
    ll\bootstrap.pl line 179
    1 file(s) copied.
    1 file(s) copied.
    The system cannot find the path specified.
    1 dir(s) moved.
    D:\Oracle11g\product\11.2.0\client_1\deinstall>
    Thanks
    Edited by: 875563 on Mar 13, 2012 3:24 PM

    Hello,
    I found some components are not installed, so I need to uninstall the client and reinstall it.I'd like to know why it was not possible to make a custom installation with OUI and, then select the components you need.
    Normally, you can run OUI every time you want so as to add all the necessary components over an existing installation.
    For instance you can make a 1st installation with the "runtime" option, then in a 2nd installation add "Oracle ODBC Driver" component.
    Else you'll find here the documentation about the deinstall tool:
    http://docs.oracle.com/cd/E11882_01/install.112/e24187/deinstall.htm#BABHIGFE
    Hope this help.
    Best regards,
    Jean-Valentin

  • Oracle Client 11gR2 uninstall procedure using OUI on LINUX

    Hi Guru's,
    OS:Linux
    Database Version : 11gR2
    Can anyone please let me know the step by step procedure to uninstall Oracle Client 11grR2 using OUI.
    Actually i have Oracle DB and Oracle Client installed on the same machine.
    Thanks in advance.

    vk82 wrote:
    Hi Guru's,
    OS:Linux
    Database Version : 11gR2
    Can anyone please let me know the step by step procedure to uninstall Oracle Client 11grR2 using OUI.
    Actually i have Oracle DB and Oracle Client installed on the same machine.
    Thanks in advance.
    click UNINSTALL button

  • Swap Space not available while installation

    I am trying to install Primavera however it gives me error that swap space available is 0MB, minimum required is 500 MB.
    I checked in virtual memory and found that 3948 MB is available as virtual memory.
    Please advise solution immediately.
    Regards
    Kapil

    # swapon -sThank you, but as I said, this does not work on my VPS. I get the message:
    "swapon: /proc/swaps: No such file or directory"
    # free -mThis returns the following line beginning with "Swap":
    total used free
    Swap: 10001 4525 5475
    This means I have around 5.5 GB free swap space?!
    Then does oracle maul I have 0 swap space??? (150MB is required by default in the oraparam.ini file)

  • After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

    After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
    If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
    This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
    See this document for details:
    "64-bit Windows required for After Effects and Premiere Pro CS6"
    In general, you can only download and use applications for which your computer system meets the minimum system requirements.
    Premiere Pro system requirements
    After Effects system requirements

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • Installation of Oracle Client

    I downloaded the Oracle 8 client and am trying to install it. I reach a installation screen but the moment I run the installer it just shuts down without installing the client.
    Can someone please help?

    1) This is a macosx/Jaguar forum, not linux.
    2) what glibc are you using ? The oui binaries are linked with glibc 2.1.3. There is also a similar problem on windows running pentium-4 or xeon chips. In that case I use the installer that comes with v9.2 and with a little luck it also works in your situation.
    Ronald.
    http://ronr.nl/unix-dba

  • Installation of Oracle Client 10.2.0.1 on Windows Vista Business

    I get the error "cannot initiate oci.dll"
    can anybody help?
    yours
    Andreas Umlauft

    Hi,
    Please note that an interim solution has been posted on this Blog:
    http://cshay.blogspot.com/2007/02/getting-ready-for-windows-vista.html
    I am in the process of installing the patchset 10.2.0.3 and perform the client installation.
    Good luck!
    Regards,
    Jesmond

  • Oracle Client 11gR2 11.2.03 - OCI.dll version ?

    Hi,
    I have a system installed with Oracle cleint as Administartor without any patch
    All the drivers liek ODBC and all refer to thr right version number which is - 11.2.3 but OCI.DLL version is 11.2.0.1.
    Is this correct or i m miising something?

    khushi wrote:
    Hi,
    I have a system installed with Oracle cleint as Administartor without any patch
    All the drivers liek ODBC and all refer to thr right version number which is - 11.2.3 but OCI.DLL version is 11.2.0.1.
    Is this correct or i m miising something?Individual components may or may not be upgraded at any given patch.

  • After change the hostname oracle is not available

    i changed the hostname of the server.after restarting the server.i try to login as sysdba but i recived the message oracle not available.It is an oracle 8i database.I anybody aware of this problem.please replay as early as possible
    Regards
    Senthil

    Try to start the related oracle service and feedback the output.
    When changing the hostname database itself shouldn't be affected by this change, but connectivity files are, so verify the listener status and make sure you have changed hostname references too at the listener.ora file.
    ~ Madrid
    http://hrivera99.blogspot.com/

Maybe you are looking for