Local Network Path?

Hi all,
I would like to construct a java.io.File that represents a resource on another machine in the local network.
In Win32, the path is "\\machine\folder".
I would like to know if is it possible to browse it using Java.
Thanks a lot
Ahmed

The Java API-Reference says it works.
Use the following string to represent your UNC path:
"\\\\machine\\folder"

Similar Messages

  • Urgent: read pdfs from network path?

    Hi friends,
    I have a probem:
    When I try to read a pdf (which is in a local network path) my applicattion does it ok only if I've logged on windows as administrator user in my PC, but it doesn't work if I try to log with another user... Any idea?
    Can I solve this question modifying my forms application? (How??) or it's only a windows permissions problem?
    Thanks
    Jose

    I can think of two ways to set the permissions. One is with HOST and then a command-line tool to set the permissions. I think there was something like that in the NT/Windows Resource Kits. The other one would be to use ORA_FFI and call a DLL that can set the permissions for you.
    But in either ways, you're doing these modifications using the currently logged on user. If the problem is that this user doesn't have access to the file, he/she cannot set the security settings either. You would have to set the access permissions on creation of the file.
    But you not just set the default permission of the directory in such a way that any newly created file gets the correct permissions?
    One last resort would be to schedule a script through the "at" command at scheduled intervals under a 'superuser" that will set the correct permissions.

  • Restoring database by specifying network path for a local pc

    I am using SQL Server 2008 R2. When I try to restore the database by using restore command
    RESTORE DATABASE [dbname]
    FROM DISK = N'\\PC91\D\backup.BAK' WITH FILE = 1,
    MOVE N'test' TO N'\\PC91\D\dbname.MDF',
    MOVE N'test_log' TO N'\\PC91\D\dbname_log.LDF',
    NOUNLOAD, STATS = 10
    I get error like
    Msg 3634, Level 16, State 1, Line 1
    The operating system returned the error '5(Access is denied.)' while attempting 'CreateFileW' on '\PC91\D\dbname.MDF'.
    Msg 3013, Level 16, State 1, Line 1
    RESTORE DATABASE is terminating abnormally.
    Here in above code I use network path, but this network path is network path of my pc where SQL Server exists.
    If I use below restore command then it works
    RESTORE DATABASE [dbname]
    FROM DISK = N'D:\backup.BAK' WITH FILE = 1,
    MOVE N'test' TO N'D:\dbname.MDF',
    MOVE N'test_log' TO N'D:\dbname_log.LDF',
    NOUNLOAD, STATS = 10
    This command also restores the database to same folder.So if i specify the network path why does error comes?

    Hello,
    Just as others post above, the Shared Folder Permissions and NTFS Permissions are two sets of permission entries. They are independent in the sense that neither changes the other.
    When using share permissions and NTFS permissions together, if there is a conflict in the configuration, the most restrictive permission prevails.
    You can refer to the following articles about more details:
    Share and NTFS Permissions on a File Server
    Combining Shared Folder Permissions and NTFS Permissions
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Asa 5505 Remote VPN Can't access with my local network

    Hello Guys ,, i have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration , please can you help me
    ASA Version 8.2(1)
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.30.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 155.155.155.10 255.255.255.0
    interface Vlan5
    no nameif
    no security-level
    no ip address
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    access-list inside_nat0_outbound extended permit ip any 192.168.100.0 255.255.255.240
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    ip local pool vpn-Pool 192.168.100.1-192.168.100.10 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy mull internal
    group-policy mull attributes
    vpn-tunnel-protocol IPSec
    username xxx password eKJj9owsQwAIk6Cw encrypted privilege 0
    vpn-group-policy Mull
    tunnel-group mull type remote-access
    tunnel-group mull general-attributes
    address-pool vpn-Pool
    default-group-policy mull
    tunnel-group mull ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
    service-policy global_policy global
    prompt hostname context

    Hey Jennifer i did every thing you mention it , but still i can't reach my inside network (LOCAL network)  iam using Shrew Soft VPN Access Manager for my vpn connection
    here is my cry ipsec sa
    interface: outside
        Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: 155.155.155.1
          local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
          remote ident (addr/mask/prot/port): (192.168.100.1/255.255.255.255/0/0)
          current_peer:155.155.155.1, username: Thomas
          dynamic allocated peer ip: 192.168.100.1
          #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
          #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
          #pkts compressed: 0, #pkts decompressed: 0
          #pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
          #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
          #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
          #send errors: 0, #recv errors: 0
          local crypto endpt.: 155.155.155.1/4500, remote crypto endpt.: 155.155.155.20/4500
          path mtu 1500, ipsec overhead 82, media mtu 1500
          current outbound spi: 73FFAB96
        inbound esp sas:
          spi: 0x1B5FFBF1 (459275249)
             transform: esp-aes esp-sha-hmac no compression
             in use settings ={RA, Tunnel,  NAT-T-Encaps, }
             slot: 0, conn_id: 12288, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
             sa timing: remaining key lifetime (sec): 2894
             IV size: 16 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001
        outbound esp sas:
          spi: 0x73FFAB96 (1946135446)
             transform: esp-aes esp-sha-hmac no compression
             in use settings ={RA, Tunnel,  NAT-T-Encaps, }
             slot: 0, conn_id: 12288, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
             sa timing: remaining key lifetime (sec): 2873
             IV size: 16 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001

  • Updating hybrid configuration failed - Kerberos authentication: The network path was not found

    I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
    When I run the Manage Hybrid Configuration, I receive the following error:
    Updating hybrid configuration failed with error
    'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
    path was not found.
    The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
    [1/5/2014 21:21:1] INFO:Opening runspace to
    http://[servername]/powershell?serializationLevel=Full
    [1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
    [1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
    error occured while using Kerberos authentication: The network path was not found. 
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
       at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
       at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
       at System.Management.Automation.Runspaces.RunspacePool.Open()
       at System.Management.Automation.RemoteRunspace.Open()
       at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
       at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
    I have sought help, posting on the forum at community.office365.com -
    http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
    Has anyone else come across this problem running the Hybrid Configuration Wizard?

    Hello Darrell,
    Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
    http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
    looks good.
    As the article states you can run the Exchange BPA and it will check if any of these exist as well.

  • SCOM agent install fails Error 80070035 - the network path was not found

    I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
    Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
    So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
    The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
    I added a specific rule to allow TCP 5723 and 5724
    DCOM is enabled
    I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
    I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
    did install to) and the server has plenty of disk space available
    I am not sure what else to look at so would welcome any ideas
    Thanks

    Hi Petro,
    I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
    So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
    Also check if your agents have the WMI service started and enabled ?
    Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
    Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
    Component A
    Component B
    Minimum Requirement
    Root management server or management server
    Agent
    64 Kbps
    Root management server or management server
    Agentless
    1024 Kbps
    Root management server or management server
    Database
    256 Kbps
    Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
    Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
    Also post the event logs of the Agents which are in not monitored state for analysis.
    SCOM Agent installation failure error codes
    Error
    Error Code(s)
    Remediation Steps
    The MOM Server could not execute WMI Query "Select * from Win32_Environment where
    NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
    Operation: Agent Install
    Install account: domain\account
    Error Code: 80004005
    Error Description: Unspecified error
    80004005
    1.  Check the PATH environment variable.  If the PATH statement is very long, due to lots of installed third party software - this can
    fail.  Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
    2.  The cause
    could be corrupted Performance Counters on the target Agent.
    To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
    prompt. Press ENTER after each command.
    cd
    \windows\system32
    lodctr /R
    Note /R is uppercase.
    Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
    How to manually rebuild Performance Counter Library values
    http://support.microsoft.com/kb/300956
    3.  Manual agent install. 
    The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
    computer “servername.domain.com”
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    8004100A
    800706BA
    1.  Ensure agent push account has local admin rights
    2.  Firewall is blocking NetBIOS access
    3.  Inspect WMI health and rebuild repository if necessary
    4.  Firewall is blocking ICMP  (Live OneCare)
    5.  DNS incorrect
    The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
    Operation: Agent Install
    Install account: DomainName\User Account
    Error Code: 80070005
    Error Description: Access is denied.
    80070005
    80041002
    1.  Verify SCOM agent push account is in Local Administrators group on target computer.
    2.  On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
    Disable McAfee antivirus during push
    The MOM Server failed to open service control manager on computer "servername.domain.com".
    Therefore, the MOM Server cannot complete configuration of agent on the computer.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    800706BA
    1.  Firewall blocking NetBIOS ports
    2.  DNS resolution issue.  Make sure the agent can ping the MS by NetBIOS and FQDN.  Make sure the MS can ping the agent by NetBIOS
    and FQDN
    3.  Firewall blocking ICMP
    4.  RPC services stopped.
    The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
    on this computer, please retry the Push Agent operation after some time.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 80072971
    Error description: Unknown error 0x80072971
    80072971
    This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
    %windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
    When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
    of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
    if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
    the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
    http://support.microsoft.com/kb/934760/en-us
    The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
    agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Remote Computer Name: servername.domain.com Install account: DOMAIN\account
    Error Code: C000296E
    Error Description: Unknown error 0xC000296E
    C000296E
    1.  Netlogon service is not running.  It must be set to auto/started
    The MOM Server detected that the following services on computer
    "winmgmt;(null)" are not running
    C000296E
    1.  WMI services not running or WMI corrupt
    The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
    required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: C0002976
    Error Description: Unknown error 0xC0002976
    C0002976
    1.  Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
    The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
    Install account: DOMAIN\account
    Error Code: 80070643
    Error Description: Fatal error during installation.
    Microsoft Installer Error Description:
    For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
    C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
    80070643
    1.  Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
    Call was canceled by the message filter
    80010002
    Install latest SP and retry. One server that failed did not have Service pack installed
    The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
    share exists.
    80070006
    1.  Manual agent install
    Possible locking on registry?
    http://www.sysadmintales.com/category/operations-manager/
    Try manual install.
    Verified share does not exist.
    The network path was not found.
    80070035
    1.  Manual agent install
    The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
    80070070
    1.  Free space on install disk
    The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
    80070079
    NSlookup failed on server. Possible DNS resolution issue.
    Try adding dnsname to dnssuffix search list.
    The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
    8007041D
    80070102
    NSlookup failed on server. Possible DNS resolution issue.
    Verify domain is in suffix search list on management servers.
    The Agent Management Operation Agent Install failed for remote computer "name"
    80070643
    1.  Ensure automatic updates service is started
    2.  Rebuild WMI repository
    3.  DNS resolution issue
    The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
    80070652
    Verify not in pending management. If yes, remove and then attempt installation again.
    The MOM Server detected that computer "name" has an unsupported operating system or service pack version
    80072977
    Install latest SP and verify you are installing to Windows system.
    Not discovered
    Agent machine is not a member of domain
    Ping fails
    1.  Server is down
    2.  Server is blocked by firewall
    3.  DNS resolving to wrong IP.
    Fail to resolve machine
    1.  DNS issue
    The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
    8007046A
    1.  This is typically a memory error caused by the remote OS that the agent is being installed on.
    There are currently no logon servers available to service the logon request.
    8007051F
    1.  Possible DNS issue
    This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
    of the Windows Installer service.
    8007064D
    1.  Install Windows Installer 3.1
    The network address is invalid
    800706AB
    Possible DNS name resolution issue.
    Tried nslookup on server name and did not get response.
    Verify domain is in suffix search list on management servers.
    The MOM Server failed to perform specified operation on computer servername.domain.com
    80070040
    1.  Ensure agent push account has local admin rights
    The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
    80072979
    1.  Correct DNS/WINS issue.
    2.  Try pushing to NetBIOS name
    Gautam.75801

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • Mac was hacked on local network by roommate-how to re-install my files w/o reistalling command/terminal hack codes?

    I have a Mac Book Pro running latest version on Mountian Lion
    Processor  2.3 GHz Intel Core i7
    Graphics  Intel HD Graphics 4000 512 MB
    Memory  8 GB 1600 MHz DDR3
    Software  OS X 10.8.3 (12D78)
    My roommate hacked my Mac. I assume he did this via an old Mac he use to have access to, & then made changes via his PC & his Android phone (can tell by comparing Terminal to Access & Little Snitch) & since the codes I found all were as my User name & as Root Access... Thinking he started gaining access through the weak spot via Reboot Disk & Terminal access from there-though he denys it completely... (But I printed it all out) He accessed ALL my passwords & at the time I didn't know that as I kept trying to change things & lock things up... he was getting hidden files of EVERYTHING I WAS DOING & had remote access to my system, anything I did & camera on my mac.
    He hid files with sudo codes in Terminal & had constant any access via remote access, booting, starting or turning off as well as secretly deleting any files or notactions he wanted. He was ghost. 
    So now not only did he has complete access to my computer & camera... He would enter my room & take what he wants & then access my computer to delete EvoCam files/videos/pics.
    He also has been tracking everything I do on my computer and assume he has figured out how to hack my phone by now as well.
    He will be an EX-ROOMMATE as soon as I can legally get him out. But until then I am stuck. (Buying locks for all 3 of my bedroom & closet room access doors too!)
    I currently have him blocked off the local network & internet. But that won't last long.
    I jcopied over to my external hard drive all my important info, pics, files and just deleted the rest.
    It took many hours to get my mac to actually delete everything (I HOPE) & then finally let me re-load Mountain Lion. Now I am slowly adding back programs. I think he was also using the Windows interface & some Windows program to sneak past my firewall & all the stops I put up to block him off local.net.
    Changed ALL my passwords again-already. Hopefully by zeroing out my hard drive numerous times that it deleted his lines of codes.
    Tested in Terminal some of the lines of codes he used (Just lsof & ls -a, history, etc)
    SOOO MY QUESTIONS ARE:
    Is there a way to let him use the network without him being able to access my Mac??
    I have ALL ways I can find to turn off any file sharing, local or remote access... but I did that last time & he figured out a way around it!
    My Nework is on a NETGEAR Range Max N wireless router. I configured it this time via Ethernet instead of by Wireless-made my Mac only machine to make changes & only via Ethernet access. (Gave Ethernet & Wireless each their own IP address.)
    I also turned off the remote access again, locked in IP addresses to specific machines/phones/Pads... IE 192.168.1.2... on Router.
    I also installed Little Snitch, Have Tech Tools 6... Need a good virus protection... (did find some crap only in a couple of my emails when I used one I downloaded as a trial before the re-format... )
    Worried about installing Windows again.
    How do I block him from getting root access again?
    How do I keep him from hidding any codes?
    Thank you in advance for your help & suggestions!

    Well when he hacked it.. he took control of root & istalled a couple of programs from what I could tell-unforchantly don't have print outs of that.
    He added ARDAgent,  .user.sbin/aonotifyd lsoscript -e 'tell app ARDAgent diskutil list pdisk ls root ls local.com sudo ~/ .bsh.profile... was the part I started printing at...
    WHAT THE HECK IS: jbapps-
    then he went into mdworker, then added private screensharing.agent.launchd,
    then private event
    then private mdsDirectory.db
    then private messages mdsDirectory & se_SecurityMessages, & Private screensharing agent
    then accessed root access & got a list of every password that I had & used...
    Then installed Microsoft office \2011\Office\uniscribe.framework\Versions\12\Uniscribe
    the WLMUser.framework then accessed atcp:8254
    then core tools
    the path/to/file.txt
    then netbiosd
    then networksetup
    then newsyslog
    the defaults write com.apple.finder AppleShowAllFiles TRUE
    RSA_SecurID_getpasswd
    NetBootClientStatus
    diskmanagementd
    aosnotifyd
    asr
    automount
    avbdeviced
    PasswordService
    pboard
    ocspd
    ntptrace
    postalias
    pwd_mkdb
    racoon
    sercurityd
    slapd
    snmetadump
    systemkeychain
    systemsetup
    tcpdump
    universalaccessd
    autopen
    bootpd
    Microsoft SyncServicesAgent
    Code Signature & Resources
    osascript]remote management
    lastdate
    USER_IS_ADMIN=ADMIN
    hostname & domainname
    NetAuthAgent.app/Content?MacOS
    chflag hidden /mach_kernal
    sudo password root
    man sudo list
    finger lst User EventAgent launch User Event Plugins...
    and on & on & on...
    He got drunk...really drunk one night & told me that he saw something in my room... and then I found he had hidden the Facetime camera & an account had been setup which I never set up...
    A couple of programs got installed that I never install too. Plus when I went to reinstall my Mac there were four choices listed of places I could "istall Mountain Lion" to. One listd was my thumb drive-duh,, one was the hard drive, one was a PC Windows Drive??? the other was the partioned Reinstall part that Lion put on...
    Yeahhh... going to have to put the locks on all 3 doors.. the router is in my room as well as the old Mac & the cable modem. But the internet cable runs through his room to get to mine....
    I just have to get him out as soon as I can without cleaning me out first & setting it back up to where he has access to my machine or my phone.
    I wonder if he has hacked my phone... is there a way to tell?

  • MDT user credentials error: Invalid credentials: The network path was not found

    I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
    When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
    After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
    wpeutil InitializeNetwork
    ping localhost
    wpeinit
    Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
    It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
    Have someone can help me?
    Thanks a lot

    Hi,
    Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
    Dell Latitude E5400:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
    Dell OptiPlex 760:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
    Please make sure you add the correct network driver to deployment point.
    Additional Information:
    http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
    http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
    Hope it helps.
    Tim Quan - MSFT

  • Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

    I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
    Richard

    I thought I would add in another scenario, since this link came to the top of my list in the search engine.
    We are running 2008 R2 with SP1 (it happened without SP1 as well)
    We could not map using UNC (IP, FQDN, or netbios name).  We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
    In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
    You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
    And add LanmanWorkstation to Providerorder
    I found on a Citrix board that citrix has an issue with this as well
    If you're running VM  here is an additional step you should do as well
    When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
    > Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
    To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
    To workaround this issue, if you have already upgraded VMware Tools:
    Click Start >
    Run, type regedit, and click OK. The Registry Editor window opens.
    Navigate to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
    Delete the reference to
    hgfs.
    Reboot the virtual machine.
    We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
    I hope that this saves people a lot of time.   I spent days researching this.
    This was the solution for me on 2008 R2 DC w/ Exchange.  I do not have VMWare installed but do have Hyper-V.  Thank you so much!

  • DirectoryEntry Invoke(SetPassword) exception: The network path was not found.

    I have a local AD Machine with windows server 2003. Cloud AD is on Windows Server 2008 R2.
    Problem is that when I try to create a new user through LDAP(C#), it creates succesfully, but Invoke(SetPassword) gives following inner exception:
    System.IO.FileNotFoundException: The network path was not found. (Exception from HRESULT: 0x80070035).
    code I am using is:
    string szCloudUserPath = string.Format("LDAP://" + CloudDomain + "/" + "<GUID=" + CloudUserGUID+ ">");
    var deUser = new DirectoryEntry(szCloudUserPath, CloudAdmin, CloudPwd, AuthenticationTypes.Secure);
    deUser.Invoke("SetPassword", new object[] { szNewUserPassword });
    deUser.CommitChanges();
    Anybody can help me please?

    Hi,
    Based on your description, the following thread focuses on the similar issue and can be worth taking a look.
    DirectoryEntry.Invoke SetPassword - The network path was not found.
    http://forums.asp.net/t/1164221.aspx
    Besides, I notice that you have post the same thread in the ASP.Net forum. In my opinion, regarding this issue, we will get more professional help in that forum.
    Best regards,
    Frank Shen

  • Cannot join domain "the network path was not found"

    Hi there.
    As I wanted to install new Microsoft  Lync Server, I tried to prepare a virtual machine for this. For some reason I used a virtual machine that I tested for some another services, therefore it had some changes on it.
    As you know before installing Lync Server your client must be join a domain and when I tried to joined it I faced with this error "The following error occurred attempting
    to join the domain “ysatech”; the network path was not found "
    Before my search, I thought it was DNS problem. I checked DNS but nothing was wrong.
    I searched for it and I read some forums answers and I resolved it:
    As I said my client server had some changes, the problem was in the NIC but not about DNS or WINS. The "Client for Microsoft Networks" of
    NIC of my domain network was not checked and it must be checked.

    Check the dns setting on client and ensure the setting as below.
    1. Each workstation/member server should point to local DNS server as primary DNS and other remote DNS servers as secondary.
    2. Do not set public DNS server in TCP/IP setting of client/member server.
    3. If multiple NIC are configured disable the unrequired NIC.Check the NIC binding order too.
    This issue may occur if the TCP/IP NetBIOS Helper Service is not running on the client computer.
    http://www.chicagotech.net/pathnotfound.htm
    Network Path Not Found" Error Message When You Try to Add Workstation to Domain:http://support.microsoft.com/kb/285182
    I will also recommend to enable the Client for Microsoft Networks.If still issue persist post the ipconfig /all details of client computer.
    Best Regards,
    Sandesh Dubey.
    MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
    My Blog
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • The network path was not found *DNS*

    Hi all,
    Some background... I only have one DC which is running AD and DNS.  I have a file/share server that I want to add to the domain and along with a few workstations.  I was getting an error before this and it was 'dns name does not exist'... but now
    I'm getting 'the network path does not exist' error.  Some items that I changed are for the DC I pointed the DNS to itself by changing the primary DNS to its loopback address (127.0.0.1) and the secondary dns setting is left blank.  For the file/share
    server I changed the primary DNS to the DCs IP address.  The DC does have a forwarder for resolving external addresses that it does not know locally.  
    When I try to add the file server to the domain by entering in the DC admin credentials it just says 'the network path was not found' to the DC and it doesn't give me an error code. I just want to add the server/clients to the domain.
    The file/share server is a windows 2012 r2 and the DC is also windows 2012 r2.  

    Both the DC and file share server are on the same subnet and I checked the logs on the FW and the FW is not seeing the traffic.
    As far as DNS goes do I have it configured correctly.  For the DC I have a static IP and the Primary DNS setting as its loopback address.  The file share server also has a static IP address and the Primary DNS setting is the DCs IP address.
    On the DC there is a yellow exclamation icon on the network icon which says 'no internet access'.  This could be a problem... but when I do nslookup I'm able to resolve names.
    On the DC and File server I have McAfee agent EPO running on it (HIPS and A/V).  I checked the logs on the DC and the only thing being blocked was netbios which I allowed it now but for some reason the logs still show that it is being blocked.

  • Peer to Peer network error 0x80070035 the network path was not found

    We are adding an XP computer to a peer to peer network with Vista machines.  The Vista machines can see the XP machine in the network but when clicking to get to share files, message comes up Windows cannot access \\XPcomputer.   The message adds that there may be a spelling error or that there may be a problem with the network.  But the error message is the one listed in the subject of this email.
    XP machine is properly set to share folders and there is no other visible proble.  There is no message from the antivirus software so I am assuming the address is within the Antivirus acceptable range.  Antivirus is Norton 360.
    Any suggestions...very frustrating... thank you

    Hi,
    Before we start, please access the following article. This KB article introduces our support policies for peer-to-peer network
    Using Crossover Cables in Home or Peer-to-Peer Networks
    http://support.microsoft.com/default.aspx?scid=KB;EN-US;278870
    The error code 0x80070035 indicates that the network path is not found. This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.
    1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
    2. Right click on the connection that you use for the local connection, and then click "Properties".
    3. Click Continue button to verify the administrator permission.
    4. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
    5. Click "Advanced" button in the open window. On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
    The following article introduces NetBIOS over TCP/IP
    NetBIOS over TCP/IP
    http://technet.microsoft.com/en-us/library/bb727013.aspx
    If the issue is not resolved, you may try to access the computer with \\[IP address] as a work around.

  • Active Directory users not made member of Local Network group

    Hi all,
    I've just done a clean install from 10.6 Server to 10.8.4.
    The issue I seem to be having is a mismatch between what Groups in Server.app is reporting as members (who happen to be users or groups from our Active Directory domains) of a Local Network group and what dseditgroup reports as members of the same network.
    The Setup:
    In Groups in Server.app under Local Network Group I have created a group call "AccessServer"
    Members in that group are:
         - AD-Domain User Group (so should be all users in the domain)
         - MacOS X "netaccounts" group (again, should capture all users that connect through the network I've used this in the past/10.6 very handy)
         - AD User 1
         - AD User 2
         - AD User 3
    The Server is bound to the AD Domain, All-Domains is not selected and a Search Path is added for each Domain needed and set at the top of the search order.
    The Behaviour:
    AD User 1 can access AFP and other services as expected.
    AD User 2 and 3 cannot.
    Another user within AD-Domain User Group or netaccounts can access AFP and other services as expected
    Yet other users within AD-Domain User Group or netaccounts cannot
    Furthermore: 
    If I REMOVE AD User 1 (a working user) *and* the AD Domain Group and netaccounts Group.  I can still login with that account!
    Diagnosis:
    I tried checking group membership with dseditgroup, the results match the behaviour, not the setup.
    >dseditgroup -o checkmember -m ADUser1 accessserver
    yes ADUser1 is a member of accessserver
    >dseditgroup -o checkmember -m ADUser2 accessserver
    no ADUser2 is NOT member of accessserver
    >dseditgroup -o checkmember -m ADDomainUser/netacc accessserver
    yes ADDomainUser/netacc is a member of accessserver
    >dseditgroup -o checkmember -m n accessserver
    no ADUser2 is NOT member of accessserver
    When non-member users try to connect I get a message in the logs of (IP/DNS values anonymized):
    2013-06-25 3:04:36.794 PM sshd[5217]: error: PAM: authentication error for illegal user ----- from ----.mala.bc.ca via x.x.
    I get the same results even after removing the user from the Groups screen!
    Failed Solutions
    - As we are a large AD I've tried specifying specific Active Direcotry servers that might better be able to find the users in question and authenticate.
    - I've let the system just sit, in hopes delayed replication would solve the problem overnight.
    - I've deleted and recreated the groups.

    Upon further investigation we have discovered:
    a) the main behaviour that is causing the problem is best described as AD users that are added to a Local or Network OS X group... either individually or through a Domain group.... are not actually recognized as members of that OS X group even though the GUI or CLI tool have added them and acknowledge them as being in the list.
    b)  This is NOT limited only to MacOS X Server 10.8.  The same behaviour is occuring on a long-running 10.6 server as well.
    c) The problem remains whether we nest AD groups to capture a large bunch of users, or add users individually.  If the user is part of the mysteriously denied set, how they are added to the OD or local group is irrelevant, including if added from the command line.
    d) Which users are allowed and which are not is unclear and appears generally random.  We have found 3 'classes' of users:    
              1 - those that are successfully becoming members every time.
              2 - those that are intermittent members.  Members on one server or another, or in one case even go from being reported as a member (by dseditgroup), to not being a member, to being a member again within the span of only a minute or two.
              3 - those that are never successfully admitted as a member.
    So the problem is both Apple's and Windows in that:
    Apple: Is allowing a group and/or user to be added and implying then membership in the group even though that membership is not being honoured in some way and there is no feedback or communication of that fact aside from generic 'denied' or 'illegal user' errors.
    Windows:  Is passing along membership through its groups and users, but not completely, for reasons that are, at this point, a mystery.
    Really hoping people have some ideas on this.  This system of nested groups or individual user access is something we have of course being using for many years.  So this is a major setback.

Maybe you are looking for