Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

Similar Messages

  • Why i cannot create the sql azure database from my own country 'Nepal' ?. why it is not include in the list of country when we sign up for azure database. :( !!!

    why i cannot create the sql azure database from my own country 'Nepal' ?. why it is not include in the list of country when we sign up for azure database. :(  !!!
    canot we try this new feature ,dosnot we need to try this too..why such discermination for our country nepal. :(

    Hi Anil,
    I am Mahesh from Microsoft Innovation Center. From August 2014 we have made Azure Available to Nepal. You can now directly sign in to azure with your Nepal Based Mobile Number as Verification.
    Thanks for showing your Interest in our Product.
    Mahesh Dahal

  • I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

    I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
    Thanks
    Pheona

    Greetings Pheona,
    That appears to be a hard drive based camecorder.  Usually these mount on the desktop of your computer as a little white hard drive icon.  If you go inside you should be able to find the movie files the camera is saving.  See what format they are (the last 3 letters at the end of the file name is a good place to start).
    You can drag the movie files from the camera hard drive to the computer to copy them.  Then convert them with a video file conversion program to a format iMovie can understand.
    Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
    In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4".  Then import the resulting file into iMovie and see if that works any better.
    If that program can't convert the files you can try another file conversion program:
    http://www.southpolesoftware.com/iVI/iVI.php
    http://shedworx.com/voltaichd
    http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
    Hope that helps.

  • Hi, I am from Palestine trying to use visa card to purchase an application. It doesn't work because my country seems not included in the list. I hope to find a solution for that . Thanks in advance

    my country is not included for visa card options

    Nope. You can only have one credit card attached to an account at a time. Its not that big of a deal to use two accounts, users do this all the time. Create the second account(UK Account) in iTunes on your computer...sign out of your Italian account first. Then authorize your computer for this new account: Store>Authorize this computer. Then sync your phone. Now, to switch accounts on your phone: Settings>Store...tap the ID shown...sign out...then sign back in with the ID you want to use.

  • The "J2EE process table" node not visible  in the SAP MMC

    For Netweaver 7.0 - The "J2EE process table" node not visible  in the SAP MMC.
    Details for below
    SAP Systems Manager
    SAP AG
    Version: 7100.109.15.8983
    Window Xp
    Any suggestions would be apperecited.
    Thanks
    Srini

    It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

  • AET Issue-Zfields are not available in the list of Reusable ZFields List

    Hi Experts
    I created and added Z fields using AET for Incident (SRQM_INCIDENT_H/IncidentHeaderEF VIEW).
    Same Z fields I want use in Incident_SLA (SRQM_SLAPRO\ SLASRVCTRVIEW), I make utilize of Add Reusable Field button to choose the existing Zfields. But Zfields are not available in the list of existing ZFields  for SRQM_SLAPRO\ SLASRVCTRVIEW.
    Please help me in this scenario.
    Thanks
    Chand

    This is almost same issue which makes me to reply here..
    In Extension Object MKTPL_MPL, MKTPL_MPT I could reuse the fields which were defined in MKTPL_CPT.
    And in Extension Object MKTPL_CPG, I could also reuse "some" fileds in MKTPL_CPT.
    But some of fileds of MKTPL_CPT which were already reused in MKTPL_MPL, MKTPL_MPT were not displayed in the reusable fields list for MKTPL_CPG.
    In AXTREG, The BOP and Extention location is same like below.
    Can you please explain to me why I cannot see the fields in the list? or, what should I check in the system?
    [in AXTREG]
    BO : MKTPL_CPT
    Reference BO : MKTPL_CP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_CPG
    Reference BO : MKTPL_CP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_MPL
    Reference BO : MKTPL_MP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_MPL
    Reference BO : MKTPL_MP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    Many thanks and regards,
    Soyeon

  • REST url to get titles and description for all the lists in HOST WEB.

    What should be the REST url to get specific prperties for all the list in host web for SharePoint Hosted Apps.

    Hi,
    We can use the REST URI below:
    http://myAppweburl/_api/web/lists?$select=Title,Description
    More information:
    How to: Complete basic operations using SharePoint 2013 REST endpoints
    http://msdn.microsoft.com/en-us/library/office/jj164022(v=office.15).aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • ESS job created not visible in the list of 'Scheduled Process'

    As a part of data migration , I am required to invoke an ODI scenario using a java program which in turn is invoked by an ESS job.I'm able to do the same using a standalone application created in my jdeveloper.For incorporating this into the Fusion application I created an ADF Model Project in the hcmEss Application and created a sample javaclass and jobdefinition in the project,similar to what i did in my standalone application.
    I have included my job definition in the MarHcmEss and included the MAR file in the EarHcmEss.Also I have given the jazn security for my job,similar to other visible jobs.Still the job that I created is not visible in the list of jobs in the 'Launch ESS Monitoring UI'
    All this i tested using a deployment of hcmEss and hcmTalent Applications into my standalone weblogic server.Is there anything that i might have missed during the process?.I am new to ESS.
    Thanks,
    Ajin

    I'm facing the same issue.
    Also I'm unable to populate the values from the Resource Bundle in the Localization section of Job Definition.
    Any help will be appreciated.
    Thanks,
    Sangita.

  • Problem with Thunderbird email: When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others rece

    Problem with Thunderbird email:
    When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
    Bob Greenman

    Are you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.

  • Ipod touch is not syncronizing is not even on the list of devices on itunes even when I connect it, is not syncronizing wireless either HELP

    ipod touch is not syncronizing is not even on the list of devices on itunes even when I connect it, is not syncronizing wireless either HELP
    I have some updates in regards my music that I want to upload to mi ipod touch 4th generation 64gb and my computer recognizes the IPOD connected via usb but my computer on  itunes doesnt have any info about it, I don't want to reset all the settings becuase I spent a lot of money on you guys and simply mi ipod is not syncronizing I DEMAND help please also my ipod is not syncronizing wifi it says: "syncronization will be done when VAIO (my laptop) is available" but my computer  IS AVAILABLE WHAT IS WRONG WITH THIS DEVICE someone better get me a resolution this is a huge inconvenience. I am going to stop puchasing apps and music if this is not resolved I DON'T want this tutorial http://www.apple.com/la/support/ipodtouch/assistant/itunes/ or this http://support.apple.com/kb/HT1808 those are not even close to the new update Apple did to ITunes

    This will help: http://support.apple.com/kb/HT1212 : iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • Treatment of exchange rate difference- company code not appear in the list

    Dear guru,
    I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
    Also, please be noted that we configured accounts for KDM, PRD in OBYC already
    Appreciate your respond.
    Thanks and best regards,
    Hong

    Hi,
    Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
    SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
    > Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
    > Configure How Exchange Rate Differences Are Treated
    > Configure How Unplanned Delivery Costs Are Posted
    > Edit PO Supplement Text in Invoice Verification
    > Set Check for Duplicate Invoices

  • Even though my wi-fi is up and available my mac seems to take it off the list after being idle for a while and does not auto re log on no matter how many times i enter it in preferences

    Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
    HELP this is so…so… anoying .

    Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
    HELP this is so…so… anoying .

  • I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?

    I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?  Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

    leonieDF
    Thanks for your response.  My profiles are located within color sync utility as you can see here:   
    These profiles do not respond to clicking and dragging.  Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them.  Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement.  I have never needed the CMYK profile until recently, and that need has now past.  However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices).  I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space.  I don't face these restrictions with all the others, so it remains a curious circumstance for me.  I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether.  Again, many thanks for your attention to this matter.  The reach of this community is astounding.

  • Added server not listed in Server pool (not even on the list of servers)

    Hello VM Gurus,
    I'm playing with Oracle VM and I've encountered problem I can not solve of find existing solution.
    I'm playing with Oracle VM version 2.1.5.
    I have 3 psychical machines (let say A,B,C). On every machine I have installed WMWare workstation. I've created all together 5 VMWare virtual machines.
    On Physical machine A I have 1 VMWare virtual machine named A1. This is used as Virtual Machine Server.
    On Physical machine B I have 2 VMWare virtual machine named B1 and B2. B1 is used as Oracle VM Manager. B2 is used as Virtual Machine Server (also Server Pool Master and Utility Server)
    On Physical machine C I have 2 VMWare virtual machine named C1 and C2. Both are used as Virtual Machine Serves.
    1. I've Created Pool of servers (HA set up) and first added server B2.
    2. After that I've added to pool A1 without any problems
    3. After that I've added to pool C1 without any problems.
    3. After that I've tried to add to pool C2. Process (wizard "Add server") finishes without any problems. But server does not appear on the list of servers in pool. It does not exist On a list of servers neither. If I try to add server again I got error OVS-2005 saying that this server is part of another Pool.
    If I stop agent on C2 , delete folder /etc/ovs-agent/db and start agent, I can again add server, but results are same (it does not appear on list of servers. Another try to add server results in OVS-2005 error).
    If done also this process:
    1. I've stopped agent on C2, deleted folder /etc/ovs-agent/db and starte agent
    2. I've removed C1 from pool
    3. I've added C2 to pool without any problems
    4. I've tried to add c1 to Pool. Same problems as in the past with C2 (not appearing on the list of servers).
    I went though agent logs, VM manager logs. I ca not spot any problems. I've connected to database with SQL plus and there was no evidence of failed server there (so data is really not written to repository).
    I run out of ideas. What could be wrong? where to look whyt is problem. How to diagnose problem. I believe that Oracle VM somehow treat this two VMWare servers as one, but I can not prove this.
    Somebody else had this problem? Any hint what to diagnose further? I understand my configuration is a bit stupid, but I'm trying to get familiar with Oracle VM.
    Any hint will be appreciated.
    Regards
    Darko

    user465397 wrote:
    I have 3 psychical machines (let say A,B,C). On every machine I have installed WMWare workstation. I've created all together 5 VMWare virtual machines.This is a really bad idea, btw -- if you have three physical machines, you should install Oracle VM directly on each machine. Or use one machine as the NFS server and Oracle VM Manager and the other two as Oracle VM Servers. Trying to run a Type 1 Hypervisor inside a Type 2 hypervisor is fraught with peril. I'm surprised you actually got this far, to be honest. :)

  • I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

    Hi,
    I forgot my security questions and I don't have a rescue email setup.
    I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
    I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
    How can I reset the security questions.
    thank you

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Maybe you are looking for