Lock NOT set for: Archiving the data from a data target

Dear Expert,
I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
==============================================================
An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
Lock NOT set for: Archiving the data from a data target
InfoProvider ZICCPS810 could not be locked for an archiving session
Job cancelled after system exception ERROR_MESSAGE
==============================================================
Please Help Me.
Wawan S

Hi Wawan,
If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
Hope this helps,
Naveen

Similar Messages

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Lock NOT set for: Loading master data attributes

Error when running Process chain on a load pls can you advise?
Thanks

Hi,
Probably some other job is running for the same tables,or activation change run is happening.
Check your monitor to see what other jobs are running or check in SM37. Wait till those jobs finish and then try again.
You can also use tcode SM12 to delete any lock entries as well.
Cheers,
Kedar

Lock NOT set for loading masterdata/attributes - already locked

Dear all,
I've searched this forum for similar topics bu couldn't find a solution yet
I'm loading masterdata for 0PERSON but an error appears stating' Master data table or text table already locked'.
I've checked if there is an attribute change run active but there isn't anything, I've executed all of them where necessary.
Transaction RSRV is not showing problems for the info object (No SIDS missing etc)
There are no locked records in SM12/SR12.
I've tried to reload the infopackage and run the DTP again but without success.
Please advice how to unlock the table.
Regards
Markus

Hi,
Just check following
1. Whether there is any active job in SM37 for loading this master data ,if anything triggered manually
2. Check whether any R/3 job is active for this master data
3. Check whether any attribute change run job is active
4. Check whether any roll up /BIA job is running
5. Check consistency of table in SE14 and RSRV for master data
6. Try to manually activate and see if same error is coming?
Also check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0869e29-1405-2e10-27be-db1dad7703c5?QuickLink=index&overridelayout=true
Thanks and regards

HT5312 after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure and then I cannot login? now my iPhone has got all the cotacts lost.

after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

Error Message "The Remote device or resourse wont accept connection, not set up to accept connection from port https"

I get this error message when trying to open and log into an online casino "The Remote device or resource wont accept connection, not set up to accept connection from port https".
I am on a desktop computer my connection to the net is with a USB Virgin Mobile hotspot device.
I also have issues with some downloads not installing right for instance SKYPE wont work. If the problems are related I don't know
Thanks

Starting in Firefox 14, Firefox will guess an address and place it in the address bar (AutoFill feature). If you have ever connected to the site using a secure (HTTPS) connection, then Firefox will try to connect security to the address suggested by the AutoFill feature. To work around this you can:
* Edit the address to force Firefox to interpret your entry literally. For example, if there is a trailing / you can remove it.
* Turn off the URL bar AutoFill feature and just use the AutoSuggest drop-down.
* Clear Firefox's memory of the site so it doesn't default to a secure connection (however, this also removes any bookmarks you have to pages on the site).
To disable the in-address-bar autofill without losing the suggestions that appear below the bar:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
(3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false. You're done with about:config and you can close this tab.
"Forget about this site" will clear cache, history, bookmarks, and permissions for the site, and probably any saved certificate. There are two ways to get to this:
* History > Show All History, right-click an entry for the site > "Forget about this site"
* Type or paste about:permissions in the address bar and press Enter, then select the site from the list on the left side, and click the "Forget about this site" button on the right side
Depending on the size of your history and cache, this may lock Firefox up for a minute or two while everything is cleansed.

Is there a way for preventing the placeholder from appearing if there is not content for it?

I am creating a structure with tags and place holders. However, not all my entries have all the same information. For example, my first entry has a 3 line address (123 West Street, Suit 23, Lincoln NE 68521) but my second entry only has 2 line address (456 North Street, Lincoln NE 68521). When imported into my structure, the second address reads 456 North Street, <address2>, Lincoln NE 68521. My question for you is, is there a way for preventing the placeholder from appearing if there is not content for it?

IJWAA,
A work-around if you don't already use XSLT (to avoid having to) is to not have placeholder text, just use empty tags in your text layout that correspond to your incoming XML structure (any unused by the incoming structure IN ORDER, will be skipped). So long as you don't mind the blank line (rather than left over placeholder copy).
If you had placeholder copy in your text box (<address2> for example) look at it using the story editor window (edit > edit in story editor, or command-y/control-y) so you can see the surrounding tags... style the surrounding tags by selecting them with the cursor and applying character or paragraph styles (with text in between the tags at the time) and then delete only the placeholder text from the middle of the sandwich, leaving the tags in tact. Trying to do this without being in the story editor will not work.
Also, when importing the XML, I believe you'll still need to use "merge content" and "don't import empty white space" as you have been in order to replace placeholder text in any areas you had it.
For situations when you have a mixture of dynamic and static text in the same text block and you are merging data (more so when the placeholder text has been deleted as I've suggested above but the dynamic tags for the possible incoming text are still there), you can use a tag you've created (I call mine "staticText") in your layout to wrap ANY bits of text you don't want to accidentally delete when the surrounding tags get populated or not, using the merge option upon importing your XML. Just be sure never to use "staticText" as an actual tag in your structure or surrounding incoming data. The text contained within staticText tags in your layout will be ignored by incoming data, and won't accidentally get deleted when it's sandwiched between two sets of tags that are dynamically populated when merge content is the import option.
In my example below I'm using brackets/carats with the tag name instead of the color coded tag icon you see in the story editor, also I've used LB here to indicate a regular line break in Indesign and SP a regular space character in indesign:
[staticText>Name:<staticText][firstName>Abc<firstName][staticText>SP<staticText][lastName>Xyz<firstName][staticText>LB<staticText]
[staticText>Address:<staticText][address1><address1][staticText>LB<staticText]
[address2><address2][staticText>LB<staticText]
all other tags on following lines...
This should just leave a blank line for address2 when no data comes in for it. I'm assuming you have line breaks, if not, all the better.

I am not able to mail the photos from iPhoto. Its always saying that the email address it's not recognized. Another situation is that when I try to add my me account in the preferences account, doesn't recognize my @me password. Tks for any help! :-)

I am not able to mail the photos from iPhoto. Its always saying that the email address it's not recognized. Another situation is that when I try to add my me account in the preferences account, doesn't recognize my @me password. Tks for any help! :-)

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
    Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
        Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
        Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
        Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
        Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
        Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
        Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
        Found keyword 'TIMEOUT_FAILURE' with value '1800'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
    Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
    Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
    Using '1800' seconds as timeout for Backint for MaxDB in the case of success
    Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
    Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
    Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
    Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
    Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
    Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
    Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
    Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
    Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2009-10-22 02:06:09 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2009-10-22 02:06:10 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
    2009-10-22 02:06:12 The backup tool is running.
    2009-10-22 02:06:12 The database is working on the request.
    2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
    2009-10-22 02:06:17 The database is working on the request.
    2009-10-22 02:06:27 The database is working on the request.
    2009-10-22 02:06:42 The database is working on the request.
    2009-10-22 02:07:02 The database is working on the request.
    2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
    2009-10-22 02:07:17 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                 Data Protection for mySAP(R)
                     Interface between BR*Tools and Tivoli Storage Manager
                     - Version 5, Release 4, Modification 0.0 for Linux x86_64
                           Build: 303 compiled on Nov 16 2006
                (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
        BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
        usage:
         backint -p <par_file> [-u <user_id>] [-f <function>]
                [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
        where:
               <user_id>    backint utility user
               <function>   backup | restore | inquire | password | delete
               <type>       file | file_online
               <par_file>   parameter file for backup utility
               <in_file>    name of a text file that defines the objects
                            default: STDIN
               <out_file>   Pool for processing messages and the results
                            of the executed function.
                            default: STOUT
        BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
        BKI0021I: Elapsed time: 01 sec .
        BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
    Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
    Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
    Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.

Also, is there any specification about the user permissions and about how the backup should be run?

Prerequisites for archiving the sales order

Hi ,
What are the prerequisites for archiving a sales order? What is the last business transaction from which the archiving process is triggered? Is it necessary to set status CLSD on the sales order for archiving ? what are the other system statuses that should be set for archiving a sales order?
Thanks & Regards
San

Hi Santosh,
Sales Order is linked to other subsequent documents in the Order Processing cycle like Delivery, Invoice , Shipments, etc. So, we've to make sure that all the dependencies are removed before we can start to archive an SO.
You can see the dependencies in SARA Transaction (Goto->Network Graphic).
The SO archiving program checks if the status of the subsequent documents are Completed or not. (status in VBUK table is "C") .
There are other options like Residence Time, Existence of PO , Existing of Accouting Doc.
You can select the options, based on your company's decision regarding the extent of SO archiving they wanted to achieve.
The program will throw the messages appropriately, based on the checks it performed and appropriate actions can be taken from the document side .
This is a link , which explains the checks the program does before archiving.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a9/55c7d490a111d1a5510000e82deaaa/content.htm
Regards,
Shail.

How do I pull just the year from a date?

I'm trying to pull just the year from a date and cannot figure out how this can be done. I tried the SUBSTR fuction but its not acting how I would expect. What I'm wanting to do is write a condition that says Item Birth Year = Current Year minus 23 I have a calc that figures the age from the difference in the birthdate and current year but I'd really like to just write a condition based just one years. Can this be done?

Hello
SUBSTR will only work on a string. To extract portions of a date you need to use the TO_CHAR command.
To get the year you would use this: TO_CHAR(the_date,'YYYY')
TO_CHAR takes 2 switches, the date to be manipulated and the portion to be extracted, with the portion in single quotes.
Once you get used to manipulating dates like this other common pieces are: DD - extracts the day of the month, MON extracts the 3 character code for the month.
Thus you can use this: TO_CHAR(sysdate,'DD-MON-YYYY') and it will convert the current date, June 7th 2012 to 07-JUN-2012
Hope this helps
Best wishes
Michael

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Lock NOT set for: Archiving the data from a data target

Similar Messages

Maybe you are looking for