Lock-ups on MCS-7825 after after OS Upgrade to 2000.4.4aSR6

About 3 weeks ago, I upgraded some MCS-7825 & MCS-7835 servers to 2000.4.4aSR6. Since then, one of the 7825's has been rebooting on its own almost twice a day. The other 7825 and 7835s are operating fine.
Anybody else encountering a problem with this? I see in the release notes, some BIOS and firmware updates are included for the 7825, and am suspecting this is the problem.

My problems actually turned out to be hardware, I think. I reviewed the logs and found out it had been happening for several months.

Similar Messages

R835 P56X lock ups

From day 1 (purchased a month ago) I'm still having lock ups with this laptop! After few hours of use the screen goes black (sometimes blue), if I try to revive it the fan kicks in at full speed sounding like a leaf blower!
I've reinstalled Win7 with the latest drivers, installed a new SSD instead of the HD and this problem keeps re-occuring randomly (daily)!
I certainly would appreciate any ideas!

I replaced my HDD with a OCZ Vertex 3 SSD for my R835-P56x. It boot in seconds and runs nice and fast, but I get lock-ups and BSOD after several hours (as described above). Not sure if it had the problem with the HDD, because I didnt use the PC very long before upgrading. I am also running a 800MB Dataram RAM Disk (Version 3.5.130) for browser cache, which I suspect could be the culprit. My bios is 3.90 (7/31/2012).
Portege R835-P56x, i5 2410M, 16GB RAM, Vertex 3 SSD 240GB.

System lock-ups after upgrading to Tiger

This topic was previously posted in 'Installation & Setup'.
After 3 days (and 18 views) I got no replies.
Maybe that forum was not appropriate, so I decided to try it in this forum.
About 4 months ago I exchanged my 80 GB Hd in favor of an 200 GB Maxtor 6L200P0. One day later I upgraded OS X 10.3.9 to Tiger (retail DVD).
At that time I experienced a frequent (several times a day) lock-up of my system.
No messages, nothing, not even after powering down and restarting.
After some time I figured out that the lock-ups occurred on Internet access. Clicking on a link in Safari, posting messages on Discussions. Even Mail locked the system a few times. Also Corripio (artwork and lyrics finder for iTunes) caused the system to lock.
After that, I decided to perform an Archive & Install (first time after almost 4 years of using this Mac). Except from having to re-install a number of 3rd party apps. the system seemed to perform well. No lock-ups were experienced for a few weeks.
Problem solved, I thought.
Although far less frequent than before, I do experience those annoying lock-ups a few times a week.
Here are my questions:
What could be the cause of the lock-up?
Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I. I'm reluctant to perform a clean install at the moment, because I haven't found a few serials of commercial and shareware applications yet ( I know, I should have written them down :-/ )
Any hints/tips to track down the exact cause?
TIA
M
P.S. ( I do have a bootable complete backup of my HD on an Maxtor Onetouch II )

Hi, M.
1. You wrote: "What could be the cause of the lock-up?"The number of potential causes range from disk corruption or bad applications to serious hardware problems, such as a defective logic board.
2. You wrote: "Any hints/tips to track down the exact cause?"I suggest treating the "lock up" problem — better described as a "freezes and hangs" problem — similar to a kernel panic as the basic troubleshooting and hardware testing steps are virtually the same. See my "Resolving Kernel Panics" FAQ.
It provides a comprehensive roadmap which you should follow from beginning to end, in the order specified in the FAQ.
2. You wrote: "Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I."The term "Clean Install" does not apply in Mac OS X. That is obsolete Mac OS 9 terminology. The closest Mac OS X equivalent to a "Clean Install" is an Archive and Install with the Preserve User and Network Settings option, which it sounds like you've already tried once previously, but you may want to try again as part of the troubleshooting process I outlined above. See my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
The other options are:
• Archive and Install without the Preserve User and Network Settings option: This reinstalls the OS and wipes out both your accounts and your network configuration, but preserves the previous System folder.
• Erase and Install: Erases the hard drive, i.e. Macintosh HD, and reinstalls the OS from scratch, preserving nothing: your accounts, network settings, and everything else on the drive are deleted.
Of those two, and since you have a bootable backup, the second (Erase and Install) would be the second-to-last thing you would try, the last being taking the machine in for service.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

HP Pavilion Elite e91804 experiencing lock-ups and crashing after LWSEP

1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.

1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.

IPhone 5 lock-ups and crashes after iOS7 upgrade

On Wednesday I upgraded to iOS 7. While I like the new look and functionality, I have experienced a couple of OS crashes/lock-ups in a way that I had to force-reboot my iPhone by holding the sleep&home buttons.
There are two situations where this happens for me: First, when the phone is locked (4-digit passcode), I swipe to unlock, then I try to type the passcode, but the device is completely locked up and doesn't accept any input. It doesn't react on the sleep and home buttons either.
The second situation is when answering a call: Phone rings, I swipe the green button to answer, then the screen goes black and the device seems completely bricked until force-rebooted.
Case 1 has happened 4 times so far since wednesday, case 2 happened three times (answering three different phone calls).
The device is an iPhone 5 64GB I bought in October 2012.
None of this ever happened to me before the upgrade to iOS 7.
Doesn anyone have the same issues? Where can I get help on this?

I have this issue as well and I did a hard reset and restore from icloud and did the same from my computer and neither of them fixed the issue. Of course I would be outside of my warranty period. My phone continues to crash at least 4 to 5 times a day. Please help us!!!

After Hotsynching a Palm Treo 680, its Hotsynch stuck in loop, lock ups, etc.

Hello,
My father is having problem with his Palm Treo 680 (unlocked). Before the incident, he Hotsynched between his Treo and his Dell Optiplex machine (Windows 2000 SP4 with all updates; USB connection).
The PDA went stuck in a Hotsynch screen on the PDA even if it is disconnected and hard resetted (battery removal since there is no hole). Eventually, the issue stopped (don't know what he did). However, there are still random lock ups and the looping Hotsynch again (no specific times and patterns). Also removing the extra memory cards didn't help either. Also, he reported that his phone didsn't ring either from incoming calls.
Does anyone know what's going on? Is the PDA dying since he uses it daily all almost all day when he is awake? His warranty expired already, he said. It seems like a lot of people had problems from my Google searches.
FYI if it helps, the Hotsynch logs BEFORE the problems (he didn't install anything new -- only data changes and updates): http://pastebin.ca/678475
Thank you in advance.
Post relates to: Treo 680 (Unlocked GSM)
Post relates to: Treo 680 (Unlocked GSM)

This behavior has been reported by users whose phones got wet in the connector area.
Was this the case in yours?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Ipad locks up after iOS 8 upgrade

WWhy does ipad lock up in safari after iOS 8 upgrade

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

After completing my upgrade to Adobe Reader 11.0.10 When I attpemt to use "Tools/File/File Save As" from IE 11 I get a "Adobe Reader is not Responding" and my browser is locked up.

After completing my upgrade to Adobe Reader 11.0.10. when I attempt to save an online PDF to my local drive I receive a blank window where I would expect to see file directory structure to save to.
No local directories are displayed for "Saving To", it is all blank. When I try to Close (by clicking X) the "File Save As" box a message pops up on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I then need to go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message.
This was not happening in previous versions of Reader.
Tolls/File/File Save As always worked properly.
I have installed IE 11 (11.0.9600.17690)

Please don't post the same question multiple times!

Before reset my all setting my lock scree is become blurry but after the reset my all setting, it was simple i need blurry lock screen

before reset my all setting my lock scree is become blurry but after the reset my all setting, it was come simple & no blurry i want to make my lock screen blurry effect how do this please help me....

Welcome to the Apple Support Communities
The way to reset the password depends of the Mac OS X version you are using.
If it's 10.6 or 10.5, see "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274
If it's 10.8 or 10.7, see > http://discussions.apple.com/docs/DOC-4101

HT1414 I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday. The security lock have never been enabled. After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD! ?????? APPLE, what programming subrouti

I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday. The security lock have never been enabled. After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD! ?????? APPLE, what programming subroutine is forgotten during functional testing prior to release of the latest iOS upgrade???? - Now from a borrowed hotel guest computer I post my ”HELP NEEDED”. Please advice if there is a way to skip a security kode I never enabled (nor even tried out and diabled) – WITHOUT spending time to find a Apple store helpdesk that restore via iTunes, and delete all my local data.
Reg
SpannishFLY

During the setup of iOS 7 which you went through after installation it asked if you wished to create a passcode. It is possible to skip setting up a passcode at this step but you must have created one.
If you can't remember the passcode and you have enabled "find my iPad" you can use http://www.icloud.com/ to remote erase your iPad, then you can set it up again, and restore it from an iCloud backup.

My iphone 4s in unlocked and i am currently using it for tmobile prepaid service. i want to restore the 7.0 settings back to 6.1.3 .. will this lock my iphone 4s once again after i restore it back to 6.1.3?

My iphone 4s in unlocked and i am currently using it for tmobile prepaid service. i want to restore the 7.0 settings back to 6.1.3 .. will this lock my iphone 4s once again after i restore it back to 6.1.3?

Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

Can i lock mi iphone by imei and after unlock if i find it

can i lock my iphone by imei end after unlock if i find it

You cannot lock your iphone by imei at all, unless this is something your carrier offers.

HT4113 After downloadeing and upgrading the IOS to IO7 the iphone was locked with an unknown passcode by itself !! What should I do??

After downloadeing and upgrading the IOS to IO7 the iphone was restarted and locked with an unknown passcode by itself !! What should I do??

Hello malsobhi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Best of luck,
Mario

HT201263 my iphone 4 was still locked and i updated the software, after the software completed the apple logo starts flashing slowly and the iphone didn't turn on, what can i do?

my iphone 4 was still locked and i updated the software, after the softwar

no, the backlight works. it's the display that doesn't. it had the problem even before i took it somewhere. also, it says the IMEI is invalid, because the phone isn't on it's network anymore. i was going to unlock it, but since the screen isn't working, i can't do that.

Lock code won't work even after resetting it, help please!!

lock code won't wok even after resetting it, please help!!!

Allow us to help unlock your phone Problem_Girl. To ensure we are troubleshooting correctly, which lock code are you experiencing difficulites with? The lock code to access your phone or a lock code for voicemail?
If you are having difficulties with unlocking the device for main access and are unable to remember or reset the password, a hard reset must be performed. To learn how to perform a hard reset on your device click http://vz.to/1jm3NkL
If you are experiencing difficulites with unlocking a certain application, please share further details.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Lock-ups on MCS-7825 after after OS Upgrade to 2000.4.4aSR6

Similar Messages

Maybe you are looking for