Lockbox issue - lockbox upload but not data in the FEBA_LOCKBOX reprocess

hi,
i have problem on the lockbox processing. when uploading a lockbox FLB2, an message pop-up mentioned something was bolcked, but the uploading over this message and the importing step finished. Then i go to posting the checks use FEBA_LOCKBOX, but i can't see any checks in the preivously uploading and it has the total batch amount zero.
The lockbox file has the check infor mation, and it uploaded but when i want to posting there is no check infomation in the checkbox number. I want to reupload the checkbox but system give the message the lockbox has been uploaded. what should i do to solve this? is there any way to reverse the previous uploading and to upload the lockbox file again? Please adise.
Thansk in advance

problem solved by run the report RFEBKA96

Similar Messages

Values coming in to PSA but not in to the Data Target

Hi BW Guru's
I have done minor enhancement on Master Data Data Source and replicated in BW System the values are coming up to PSA for the particular field but not in to the Data Target. Can any one help me on this issue. Your help will be appreciated.
Thanks in Advance,
Venkat

Hi Venkat,
Your datasource has been changed, but infosource and transfer rules - are not.
So, you'd better delete datasource - infosource assignment. Then replicate datasource again. Activate transfer rules etc.
Best regards,
Eugene

Text uploads, but not images

Dear Mark: I have a new problem. I have a new pc and upgraded Dreamweaver CS4. I can connect to server, text uploads, but not pictures. I also noticed in local files some images dropped out. When I put back and try to upload they will not.
True Brit

Oh, my!
Here's a link referring to the .dll file problem: http://www.windowssupport.org/landing/dll/dll_psmeugs.php?key=dll&gclid=CJXWoZS9v5wCFSdusw od0T3CbA
Contribute is an application contained in the CS4 Web Suites. I think that the error message you are getting is only 'speculating' on what the problem actually is.
There is something called a 'clean script' that will help to get rid of extraneous settings. I believe you need to uninstall your CS4, run the clean script, and reinstall CS4, but follow David Powers' resource on that: http://forums.adobe.com/message/1984151#1984151
Before you go and do this, go into your site definition and turn off all Contribute functionality in Dreamweaver (especially if you are NOT using Contribute).
It sounds to me as if there is a scrambled installation happening. See what these links can help with.
And do not hesitate to contact Adobe Installation Support.
Beth

Can't figure how to select a whole album to upload to Flickr. If I select all the photos in an album, the photos upload but not my titles.

Can't figure how to select a whole album to upload to Flickr. If I select all the photos in an album, the photos upload but not my titles.

Export the photos out of iPhoto via the File ➙ Export ➙ File Export menu option to a folder on the Desktop. Then drag the folder onto the disk icon on the Desktop and burn. Be sure to select the Kind, qualtiy and size of the file you need.
OT

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers.

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
B

yeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope.

I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

I am residing in Doha, Qatar (Middle East) and I wanted to buy the unlock iPhone 4S but not sure if the phone will work here... please help... thanks

I am residing in Doha, Qatar (Middle East) and I wanted to buy the unlock iPhone 4S but not sure if the phone will work here... please help... thanks

It does not. It has listed :ATX Connector 24 (20+4) Pin X 1 PC, P4-12V 4 Pin X 1 PC, SATA 15 Pin X 2PC, IDE/Molex 4 Pin X 6
You need something with 2x PCI Express 6 pin connectors.
If you have enough 4 pin connectors left over after hooking up the rest of your computer this might still work though, if you use some adapters. They require two 4 pin connectors to power one 6 pin. I recommend looking inside your computer and figuring out which connectors you will need.
I work on behalf of HP (But this isn't my job)
Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
Please give me Kudos if I wrote something that helped you.

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

Sales tax in PO but not included at the time of GR

Hi,
i have creted the PO including sales tax amount, is there any way when i post the GR against this PO the sales tax amount not calculated.

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

How do I import a playlist on home sharing? I get the songs, but not packaged in the playlist from which it was imported.

How do I import a playlist on home sharing? I get the songs, but not packaged in the playlist from which they were imported. Now I have duplicate songs in my music library.

You can't import media from one Home Sharing library to another by any other means except selecting the individual items you want to import. For example, you can't select a playlist and then click on the 'Import' button to import all the items in that playlist. You have to select all the items in the playlist before you can click on the 'Import' button. By extension, the playlist on the other Home Sharing computer will not be re-created on your computer. You can select more than one item using the 'Shift' or 'Command' keys.
What you can do is create a playlist on your computer first, with the same name if you want, and then use drag and drop to copy the media from the remote playlist to your playlist. Note that the playlist on your computer cannot be a 'Smart' playlist it must be a regular playlist for drag and drop copying to work.
Regarding 'Smart' playlists. If you create a 'Smart' playlist on your computer that uses the exact same filtres as the ones on the remote library when you import the media from the remote library they will show up in the same 'Smart' playlist on your computer.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

HT1455 I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

Try these options:
Credit Kappy.
This support article addresses a 'blue scree';
http://support.apple.com/kb/PH7212
Ciao.

Some contacts appear in the search but not appear in the contacts

Some contacts appear in the search but not appear in the contacts and same not appear in iCloud. Using iPhone 4 iOS 5.1

See if either of these help:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_The_list_of
http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html

I purchased flip player to convert wma files i have from a previous laptop and it played some of my music but not some of the others this error msg came up, i payed 30.00 so it could convert? The operation couldn't be completed. (OSStatus error -19000.)

I purchased flip player to convert wma files i have from a previous laptop and it played some of my music but not some of the others this error msg came up, i payed 30.00 so it could convert? The operation couldn’t be completed. (OSStatus error -19000.)

Dear Nay2000,
I have the same problem, my girl-friend saved a bigger Gigabyte library from her old laptop before she sold it, then at some point she realized that she couldn't play many songs that she had transfered. Now, I paid those 30 quid as well, and it doesn't play 99% of the files, that is very frustrating, is there any way you got it revived?
Regards.

Lockbox issue - lockbox upload but not data in the FEBA_LOCKBOX reprocess

Similar Messages

Maybe you are looking for