Locked objects in Transports

Hello All,
I have a bunch of transports around 50 in my system. How do I find out if any of the objects withing all the 50 are locked or not? I want to avoid the manual process of going into SE03 and checking each transport individually. Any other alternative?
Thanks,
Fahad

this is first answer in BPX ,
check in table TLOCK for the locked objects
chk the last but second question in this link
http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/tpprobs_solutions.htm

Similar Messages

Unable to delete Transport Request which contain locked objects

Hi all,
I need to delete some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these transport requests which are released and also provide a solution to delete instead of releasing them.
Thanks in advance,
Sanaz.

Hi,
Thank you for the reply.
1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
2. What are the objects which has been locked and due to that you are facing this problem.
A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
A. I have no idea about "Freight Unit".
Thanks,
Sanaz.

Is Lock Object transportable to LIVE from development server?

I had created a customized lock object on a customized table.
I can only managed to save it to $ENQ package. I tried ZSD1 but no use.
Now, since I am working in my development server, I had problem getting it across to my "LIVE" environment.
Can it be transportable?
I tried to change but no avail.
Bye

The lock object transportable is the one created with SE11, not the function modules and group generated.
IdPgr : R3TR
Obj : ENQU
Object : Exxxxx
Regards

How to transport Enqueue and Dequeue Objects / Lock Objects / R3

Hi Gurus,
i have created two lock Objects.
I transported those objects in Q system but the table tab has no objects.
But in Dev every thing is correct.
Could you please indicate how i can get the objects correctly transported?
Thanks

Easy and best approach is by getting them re transported by using transport of copy request (Type of request)
1) Get the Transport of copy request created by basis team / urself under your user.
2) Go to SE10 and highlight the request and click on include objects icon
3) Later in the pop up window select the radio button which mentions "Include free objects"
4) Then in the next screen mention the details based on the attributes of the Enque and deque object or else provide the package name and execute and in the next screen choose the concerned enque and deque objects and include them in the request.
5) Transport the Transport of copy to quality.
Also, more easiest is.
Find out the task of the request with with the enque and deque objects were created with (if more than one select all), and then include the tasks in the transport of copy and transport it to next system
If you are not able to do the above two steps then i think the object is $TMP object, kindly cross check.
Cheers

Why do we lock objects in a transport ?

hi,
why do we lock objects in a transport in SE09 ? whats the benefit/impact ?
thks

Yes Thomas, today is my TRANSPORTS day
and btw, just to confirm about locking, I have a transport moved from old system to the new one which contains this object say a function group!!.
Now I modify this FG in the new system and include in a different transport.
Due to some reason (errors encountered during transport movement), it is decided that the old transport is going to be moved from old system to new system once again. Will this impact the object that I have modified and included in the new request in the new system ?? Is it bcos of this I am asked to lock and continue my work on that ??
hope i have not confused you

Objects in transports are not locked after DB migration

Hi all,
we had an OS\DB migration to Linux\Oracle.
The transports were Not released prior to the migration.
after migration, when changing an Object the system asks for a new transport allthough there a transport allready exists with the locked object.
this way , we have the same object in 2 different transports - and the system displays the object is locked in both.
please advise.
many thanks.
Orit
Moderator message: not directly related to ABAP development, please have a look in the SAP Netweaver or Software Logistics forums.
Edited by: Thomas Zloch on Nov 25, 2011 1:57 PM

Characteristic are locked after data load; try loading and than check it.
Hope it helps.
Regards

Delete modifiable transport with locked objects (SE10)

Dear Forum,
I have a request from a developer who wishes to have a transport deleted from SE10. the transport is in status modifiable, but it has locked objects. So when i try to delete the transport the system warns me that "Request/task XXXK900962 cannot be deleted because it contains locked objects".
What is the "SAP Best Practice" way to get rid of this transport? Please explain in detail.
Any input will be greatly appreciated!
Thanks in advance,
Kind Regards,
Soren

Hello Eric,
I am facing an issue after deleting a repair object in the task.
I could not add this entry in the task as it is not allowing. The object type is as below
R3TR MCIN S901 (Its a change to info structure from SPRO - IMG activity)
Now when I want to change the object, it is giving error.
When I want to add same obj in the repair task manually it is not allowing.
Can you please give me any suggestion.
I believe as you said, when I delete a locked object, the traces that the object has been changed are deleted and hence it is giving the error.
Is there any way to manually restore the object?
Can I add the object using TR_APPEND_TO_COMM_OBJS_KEYS?
Regards,
Pratyusha

Transports... Lock Objects report?

Hi All,
Is there a report that will show me all objects that are locked in all transports? I know I can go into the individual transports and see them, but I have reason to believe that locked objects were removed from a transport that was created in Production and I have an upgrade getting ready to go-live. I need to make sure that all objects are unlocked before the upgrade begins.
Thanks in advance,
Bill

Maybe a bit late but you can use SE16(or SM30) -> select table TADIR -> select SRCDEP field and add an 'R' -> Execute.
Might take a while because it's a large table but result is a list of all objects with "repair" flag set. Those should all be the locked objects too.
Nelis

Unlock an object locked by a transport request

hi all,
i have created an infoobject and did necessary changes in TR,UR,ODS and CUBE..now i saved it in a request but that request failed. now when i am trying to transport it through other request a warning is coming that "object was written to new request"...
now what should i do? if i ignore warning will second request too fail...and how to solve this problem?

Advice: Do not transport everything in one big transport. Cut it up in small transports.
Transport 1: the infoobjects (if you made new ones) with their catalogs,
Transport 2. the infopackages (which will also collect dependent objects like datasource/infosource, etc)
Transport 3: The ODS and updaterules
Transport 4: datamart infopackages (with dependent objects again)
Transport 5: Infocube + updaterules
Transport 6: Process chain
This will give you grip on the matter and you'll know exactly where you forgot to collect something and makes fixing it a lot easier.
Ed

Can i use the SAP standard package for lock object creation ?

Dear Guru ,
I want to create a new lock ojbect for my abap program .
When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package .
But i saw the help from SAP said :
>* Package begins with A-S or U-X:
>These packages are for SAP standard objects. Customer objects cannot be created in them. Changes to objects of these packages are recorded by the Transport Organizer (Request management) and can be transported (see field transport layer.
In this case , Can i use one of the SAP standard package for this creation ? Does it will affect the SAP system ( such as the system upgrade ) ?
Thanks .
Best Regards,
Carlos Zhang
Moderator message - Please do not use code tags to format text - it should only be used for code
Edited by: Rob Burbank on May 25, 2010 11:12 AM

Hi Carlos...
First , You will never be able to use any standard SAP Package for your custom programs. So don't go for it.
So in your case what you need to do is , when you save your Lock object ,
- if you want Transport request to be created , then
in the screen shown you need to enter the Z package name (the same package as that of your ABAP Program)
or
-if you want it to be stored as local object , then
specify package as $tmp
Regards,
Uma

Moving objects between transport

Hi Experts,
Initially I recorded my info objects, ods, info source, data source, info package etc in one transport. Since the order of my transport is changed I want to delete the info object from that transport request and lock it in a newly created transport request. I am able to delete the object from the previous transport request. Can anyone explain me how can I record those objects in the newly created transport request?
Appreciate your help. It's very urgent
Thanks,
RK

Hi,
To capture (Record) any of the object in transport request, follow the steps...
1. Go to Transport Connections (RSA1)
2. In "SAP Transport" tab, Click on "Object Types".
3. In middle pen, you will get all the type of BW object.
4. Select your desored objects and by Drag-Drop put them in right pen.
5. Select the dragged objects and assign them to a particular package by clicking on "Package" tab.
6. Then it will ask for a transport request, either create it or ous your own request.
This way you can capture any object in transport request.
Regards,
Yogesh.

Transportaion and Lock Objects

Hi...
While transporting objects what are all the problems we may get and list some problems what you came across while transporting an objects.
What are all Lock obects how they will be created and how to unlock the objects...?
Please give step step procedure.
Thanx in Advance.
Vasu.

hi Vasu,
most common problem in transporting objects is the dependency objects are not transported yet in qa/production system, the other the objects change directly in qa/production, hence it's lock in request.
lock objects happened when the objects are included in transport request (manual or object change), we can unlock the objects by release the request, or delete certain object individually from the request.
take a look following about transport.
hope this helps.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm

Help: DDIC Lock object

Hi All,
I have doubt about lock object,
when we create lock object ENQUEUE_OBJ AND DEQUEUE_OBJ also gets created but what about transporting it? should we transport it saparately or automatically its get transported?
Thx.

Check the below link
[http://help.sap.com/saphelp_nw70/helpdata/en/cf/21eef3446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/cf/21eef3446011d189700000e8322d00/content.htm]
When you save a lock object, it will ask for a trasport request to be saved under. Once that is given, the generated FMs ENQUEUE_<lockobjectname> and DEQUEUE_<lockobjectname> are also saved under the same transport request.
1. Check your QA system whether the 2 generated FMs for the <lockobjectname> exist in QA?
2. Also check in SE11 whether <lockobjectname> exist in QA?
Hope it helps.
Thanks,
Balaji

Lock object moved to qa system standard fm(enque,deque) didnt move.

Hi,
I created one lock object named as ez_lockworkid in developement system and i stored that in YMM package . Two standard function modules(enque,deque) was created successfully . It was in $enq package . I moved the lock object to quality .
The problem is only lock object is moved but the two standard function modules didnt move to the lockobject. How can i solve the issue.

Hello Karthick,
The ENQUEUE* & DEQUEUE* FMs are not transported via the transport request(TR). I you wont get reference of these FMs in the object list of your TR either.
When your TR is imported in your QAS the objects included in the TR will get activated. During the activation of your lock object, these FMs are "automatically" generated by SAP & saved in the the package $ENQ!
Check the TR log & verify if the Lock object has been activated correctly in the QAS.
Read the documentation of "[Lock Objects|http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21eebf446011d189700000e8322d00/content.htm]" for further details.
BR,
Suhas

Error locking object in SPAU after 3.5 upgrade

Hi,
When I try to change the status of the object either "Reset to Original" or "Adopt Modifications" I get the message saying that "Error Locking the Objects". What does that mean? Does it mean that I dont have auth to modify the objects?
Also I would like to know what does the STOP sign mean when I complete adjusting the object mean?
Thanks

Hi,
This looks like the object referred is still locked in the transport system, which means it's contained in a change request, for which you don't have a task opened, and thus, you're not allowed to acquire the lock for yourself.
My suggestion is that you find the change request, create a task for yourself, and then try to adjust the object.
BTW, this is a general Netweaver question, unrelated to BW, so you'd get many more responses on those forums.
Best regards,
Daniel

Locked objects in Transports

Similar Messages

Maybe you are looking for